DVD printing with Pro 100

Pro 100.  Is there a way to use the hundreds of DVD labels I have already created in Epson Print CD, either with or without using My Image Garden, or do I have to start from scratch?  I have Photoshop CC 2015.

Hello. If your software saves your files to a format that was designed only for that program, you will not be able to use the files with our own software. Please check to see if there is a way to save the images to JPEG format for use in our software.

Similar Messages

  • Dull prints with Pro-100

    Earlier this week, I purchased a Pixma Pro-100 to replace my i9900 printer.  My primary motivation was to be able to print faster, as I have been very satisfied with the quality of the prints the i9900 produced.
    Yesterday, after I installed the Pro-100, I had both printers make prints of the same .jpg file -- a photo of a Bugatti Veyron taken in a showroom. The "source" was a 4MB file residing on my Sony VAIO notebook with an NVIDIA graphics chip; the paper was Canon Photo Plus Glossy.  As always, the i9900 produced a wonderful, vibrant picture using the factory settings.  Unfortunately, the version printed on the Pro-100 was dull and lifeless, with muted colors.  I then boosted each by 10% the color intensity and brightness settings on the Pro-100; again, while very slight improvement could be noted, the visual quality of the print was far below that of the i9900's.
    Does anyone have a suggestion as to what I might do to bring the Pro-100 up to the same standard as my i9900?
    Solved!
    Go to Solution.

    Hi jmeyersnv,
    In order for us to assist with this issue we will need more information.  Please let us know what version of Windows you are using as well as what program you are using to print the images.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Printing Problem with Pro-100 and Photoshop

    This is my setup: using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6. I have new Canon Pixma Pro-100 printer and set it up OK. First thing printed was a page from a document from MS Word on 8.5X11 plain paper - this came out OK. Next I fire up Photoshop and open a 4X6 inch image (just a snapshot in jpeg, landscape format) to do a test print.  I set it up in the print dialog as 4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop manages the color.  I load the paper in the rear tray close the covers and hit print.
    Now, when it starts to print the printer moves about 3.8 inches of paper out of the printer and it starts printing on the remaining 2.2 inches then spits the paper out.  It does this in Photoshop (any image, it doesn't matter), and it does it printing from Nikon’s Capture NX.  I have been able to get it to print on the paper correctly using Apple's Preview program but that that's not going to do me any good. I was on the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting I would have to use Canon's printing apps instead to print - that doesn't do me any good either. I want to be able to print from Photoshop. I have the most recent Canon driver, and Photoshop is up to date. Any one every heard of this or experienced the same problem?  I don’t think I’ve overlooked anything. Thanks JMDavis!

    Hi JMDavis,
    Have you tried printing using the Print Studio Pro plugin for Photoshop?  If this is not install, it is available for download from Canon's web site.  To download and install Print Studio Pro, please follow these steps:
     1.  Visit Canon's website at:    http://www.usa.canon.com/cusa/support/consumer
     2.  Type PIXMA PRO-100 in the "Enter Your Model Name" box and click GO.
     3.  On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
     4.  Click Software.
     5.  Click on Print Studio Pro.
     6.  If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
     7.  Click on the Download button.
     8.  The file will be downloaded to your Downloads folder.  
     9.  Once the download is complete, close all windows.
    10.  Double click [mpsp-mac-1_3_5-ea9_2.dmg] in your Downloads folder.  Files will extract.
    Follow the prompts and installation will complete.
    Once installed, please open your image in Photoshop and print it using the Print Studio Pro plugin.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Dull colors with Pro-100 vs Pro9000

    I just purchased a Pro-100 to replace my aging Pro9000 (which sometimes decides it doesn't want to print anymore).
    I mainly print 4x6 photos on Canon Matte Photo Paper and did a comparison between the Pro-100 and the Pro9000.
    Both at stock settings, the Pro-100 colors look much more dull. The Pro9000 colors pop and look much more like what is shown on my screen. Both printers were using the exact same settings for paper, color space, etc.
    Here's an example of two prints I did tonight:
    Pro9000 on the left, Pro-100 on the right. Not the best lighting, but you can see the difference. It's more pronounced in person.
    Any suggestions?

    If you aren't doing any special editing in PS then you can print from LR. I don't use PS so i don't have first hand experience, but from what I have read on various forums printing from LR is easier than PS.
    Also, you can install the Canon Print Shop Pro plugin for LR and PS and print from that. It will allow you to adjust the printer to tune your prints.
    You can get the manuals here: https://www.cubbyusercontent.com/pl/Canon+Pro-100+Manuals/_9e886cddfbc04caa9248d99e17228c5b
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How to print with "Scale: 100%" by default from Preview

    The print dialogue in Preview is set by default to "Scale to Fit".
    I never need this, I always need "Scale: 100%".
    It's annoying to change all the time I have to print a PDF from Preview the setting!
    I tried to save the print setting, but it does not work.
    So. Is there a way to set the print dialogue by default to "Scale: 100%" ?
    Mayby with a Terminal command?

    AFAICT, only for PDF files. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

  • Direct Dvd printing with 8600

    So I was wondering if it was possible to print directly to a dvd with the HP 8600.  I have the middle one.  So not the basic one and not the one that comes with the extra feeder.  Does anybody know if I can print directly or if there is an attachment I can buy to do this?

    No,
    The HP Photosmart C309 was the latest HP model which supported drect printing on a DVD, currently there are no HP printers which offer this kind of functionality and a such cannot be added with any extra accessory.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to do a Screen Print with Pro keyboard?

    Hi everyone,
    I have tried a multitude of button combination but I cannot figure out how to do a Screen Print in Windows XP...
    I am using a Pro Keyboard from Apple which has black keys.
    Can anyone help me please?
    Rio.

    Hi salmeryigit,
    Thanks you for your response...Funny enogh...F14 was one key I had not tried and it worked!
    Now I am wondering if there is a multiple Key combination that would permit me to Manually Crop only the Part on the Screen I that I need?
    Ex: In OS X I use: Shift + Comand + 4 which works like a charm as it saves the pict file onto my desktop.
    May I also ask you what document you consulted to get the first answer I asked?
    I do appreciate your help.
    Rio.

  • Hp printer laserjet pro 100 colour mfp m175 can autoload the paper or not? reply asap

    HeLP

    Hello! Could you please provide more information regarding the issue, such as in what regard you're referring to autoload?
    Any additional information will be helpful in resolving your issue. Thanks!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • LaserJet Pro 100 M175A and Livebox router

    Hi all,
    I have a question. Is compatible the printer LaserJet Pro 100 M175A (without wireless) with the Orange router livebox 2.0 (printer server mode)??
    I cannot see in the specification of the printer if its compatible with the protocol IPP or LPD.
    Thanks in advance.
    Carlos

    Hi @Popper123 ,
    I see by your post that you would like to know which toners this printer uses. I can help you.
    I did a search on the HP SureSupply website and the toners are a HP 126A.
    I have provided the website for you to take a look at. HP LaserJet Pro 100 colorMFP M175a.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Unable to center a print on 8/5 x 11 inch paper with Pixma Pro 100

    I've been using a Pixma Pro 100 for just 3 weeks.  No matter what I do or try, prints on 8.5 by 11 inch paper using the manual feed tray are not centered.  In portrait orientation, the margin on the leading edge short edge is slightly less no matter what size the image.  For example, if the leading edge margin is 1/4 inch, the opposite margin is 3/8 inch.  If the leading edge is 7/8 inch, the opposite margin is 1 inch dead.  The long side margins are equal.  I'm using Photoshop Elements 9.0.  I've tried printing out of the edit space, where "center print" is an option, but I realize now that this just centers the image in the window representing the print, that it does not center the image on the page.  I have not notice this problem with smaller size paper, such as 4 x 6.  Any suggestions?  I have not tried loading the paper in the internal or "rear" tray because I thought the paper path with the manual feed would be straighter.  Besides, I'd like to be able to use the manual feed with even larger paper and get centered prints.
    P.S.  I just tried selecting "borderless" print in PSE 9 with a custom image size smaller than the paper, e.g. 7 x 9.8 inches, and crop to fit.  Just looking at the preview, this seems to have resulted in equal margins left and right, top and bottom (the L-R margins are different than the T-B margins of course).  I was unable to make any of the necessary adjustments in Canon Print Studio Pro - I could not figure out how to unlink the height and width of the image.

    "...  that is a remarkably unhelpful and condescending response."
    Condescending or not, however, it is still most likely PSE that accomplishs this task.  I don't use PSE anymore since I switched to Lightroom.  Hence the suggestion to find a PSE forum.
    But it is the software that let's you move or put the photos where you want them to print.
    A PSE forum may be able to show you how to do this.  Example below, if I want two 5x7s in oppoiste corners, it is done easily in LR.
    If I wanted one photo centered it is a simple click to get the adjustment "squares" and move the photo.  (Bottom picture)
    BTW, I am not worried.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • New Canon Pixma Pro-100 printing with streaks on backgrounds

    Hello.  I just purchased the printer last week.  I'm operating on a MacBook Air.  I typically use LightRoom and Photoshop.  
    I'm a professional photographer and recently look a class at ICP and learned how to print there.  I was shocked at how beautiful the prints were.  This was using an Epson in a classroom.
    I did my research and talked to other photographers and decided the Pro-100 would be perfect for me, and so far, it is.
    I've had trouble with magenta casts when using LightRoom.  Switched to PhotoShop and got better results.  But some prints, especially those with a simple, plain background, faint lines appear across the page.
    Here's an example.  The lines appear top to bottom every 1/4 inch or so:
    Solved!
    Go to Solution.

    Call Canon at 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays).
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Print DVD on Pro 100 from Photoshop

    I can't figure out how to print directly to a DVD from Photoshop.
    I can print with no problem from the Easy Photoprint app, I send the job and after a while the yellow light starts blinking like it needs paper.  So I insert the disk tray and press the feed button and it prints no problem.
    However, when I print from Photoshop, I select "Disk tray K" as the paper size, send the job, and the light starts blinking, just like before.  But when I press the feed button, it stops for a couple seconds and then starts blinking again.
    I'm having to save the file as a .jpg and bring it into Easy Photoprint, which is a real pain.  Is there some trick to getting DVDs printed directly in Photoshop?

    There will be no message to load the disk tray from PS. That is why I suggested he stay with the free included software.
    I suspect that warning is to not try and load the disk tray while the printer is readying itself for printing.
    As this is the first statement in the manual;
    Placing a Printable Disc
    To print onto a printable disc, place it on the disc tray supplied with the printer, then insert it into the printer.
    My quote was, "Not after you send the job from PS." I have not tried to print a DVD from PS but I have done many from Easy Photo Print EX. It may not even be possible.
    However, you cited a good point, better to be cautious.
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 8.7, Lightroom 5.7

  • Pro-100 terrible disk printing color cast

    I am getting a terrible yellow/orangecolor cast when printing disks on my Pro100 printer.  I'm using the latest Easy Photoprint EX software on Windows 7 64-bit to print on Verbatim AquaAce Glossy disks.  These disks printed beautifully on the Epson Artisan 730 printer I used to own.  Literally no color issues ever.  However on the Pro-100 prints them up borderline unusable.
    All other prints from the printer on regular and photo paper turn out perfectly.  I've literally never owned a printer with output this good - except for the disks.  I'm using the "Printable Disk (recommended)" setting with print quality set to "high".
    The Photoprint software has ZERO color controls so I am unable to correct the color cast in software.  What's going on here?  Do I have any other options to try and fix this?

    The fact you paper prints look great.  And you tried two different brands of DVD's with the same results tells us something.
    The printer and the computer is working OK.  There is somethign else that is awry.  Some setting is worng.  With out knowing your complete process it is not possibile to pin point it here.  More info from you as to what you actually do is needed.
    Exactly what you do!  
    Switching disks is not likely to help.  You don't need the 'High' quality seting as 'Standard' works well..
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?

    Need software to print on my new PIXMA PRO-100 does anyone know what software should I use?
    Any help or link will be great appreciated.
    Thanks.
    Solved!
    Go to Solution.

    A DVD caame with the printer.  Why not use it?  Lost it, just d/l another copy from Canon.  It' free. 
    But the best is Photoshop Elements.  
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

    Hello! I have a 
    HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
    Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
    I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
    Please help me.
    Thanks!

    Hi Tolick,
    Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
    Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address?  If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
    If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you. 
    HP ePrint Software User Guide
    Getting the Printer Claim Code
    Setting Up a Custom Email Address for ePrint
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for

  • Cannot view all tabs in itunes when iphone is connected

    Hi, Just after the new itunes upgrade when I plug my iphone into my computer I cannot see all the tabs. It starts with the Summary, Info, Applications, Ringtones, Music, Movies, TV Shows, iTunesU, Ph...(cannot see the rest). I tried going to Windows

  • How to center the text in JLabel without image?

    I need to center the text inside JLabel, how do i do it? Also I need some advise, what is the best way to mark a clicked card (I'm making a card game)?

  • IMac Black Screen with fans running...Static damage?

    Upgraded the RAM and replaced the Superdrive in my late 2006 17" core duo imac last week.  It was on and worked perfectly for a week and now the screen went black but the fans stay on.  If I damaged it with static a week ago would it just now exhibit

  • Low power mode

    I went hiking this past weekend and wanted to only take my iphone instead of the usual GPS, camera, and cell phone. Unfortunately, my battery will only last about 24 hours (or less if at extreme edge of cell range). I used a GPS mapping application t

  • MERGE ERROR

    this migration problem :sqlserver to oracle in this releated to merge statement created the temp table -data are insert at the time of movement , in this table using Merge statement USING BOTH TABLE TMP SOME ONE IS BASE TABLE ANOTHER ONE IS TMP TABLE