DVI to HDMI doesn't work with Panasonic Monitor

Hi all,
I have a Panasonic monitor, model TH-50PX75U that we've used with my Macbook Pro. I have an DVI (large style) to HDMI cable that we connect the Macbook with, and it works fine.
I also have a MacPro that I want to use this monitor with. It has 1 full size DVI display port and 2 mini display ports. In the past I've used the DVI and one mini port to connect 2 monitors at once one the MacPro and it has worked fine.
I tried connecting the Panasonic monitor to use on my mid 2012 MacPro but I never get a picture. I reconnected one of the other monitors to a mini dispplay port and can see that the MacPro recognizes the Panasonic monitor. Both monitors show up in the Display section under System Preferences. I've tries various settings for the Panasionic monitor but I can never get anything to display on it.
What am I missing here? The MacPro is a mid 2012 with 3.2Gig Quad Core / 6 Gig ram / Radion 5770 graphic card, and runs ML 10.8.3.
Any advise is appreciated.
Thanks!
Ray

Ok, so I had time to do some testing and here's what I've done:
I plugged in my Macbook which does work on the Pana monitor, and looked at the Profile. I then compared it to the Profile on the Mac Pro. There are some differences which I'm guessing have to do with different HW. I'm going to include some photos of the working and not working monitor scenarios do you can see what I'm seeing.
Does anyone have any suggestions as to how to make this work?
Photo1: Shows the Macbook and the Pana monitor together using DVI to HDMI cable to connect the two.
Photo2: Shows the display settings with the small monitor and Pana connected to Mac Pro. Notice there are no numbers in the diplays. Mirroring them doesn't work either. The small monitor is using a DVI to mini port adapter to connect to the graphics card, the Pana is using an HDMI to DVI cable (same one I used with the Macbook) to connect to the DVI port of the graphics card.
Photo3: Both monitors are on. The Mac Pro knows the Panasonic is there but I never get a display on it.
Message was edited by: Rayzorx

Similar Messages

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

I upgraded to mountain lion, now my mini dvi to hdmi doesn't work

I installed mountain lion and now my mini dvi to hdmi doesn't work. I did a disk permission repair, but that didn't help. Any suggestions?

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

Extended desktop doesn't work with 2 monitors and Yosemite

The desktop doesn't extend across the two screens now that I've upgraded to Yosemite. How can this be fixed?

What version of OS X were you on prior to Yosemite? I was on Maverick and a window couldn't span over two monitors on Maverick either. I haven't had a need to span a window over multiple displays in a while so I wasn't missing it. But now that you mention it, it would be nice to have that ability back for the few times when it does come in very handy and I'd like to use it.

TP T60 with VISTA and dock doesn't work with DVI

Hi, at the first excuse my English.
I am beginner ]:->
I have Lenovo T60 with vista. I have advance dock from lenovo. DVI on dock doesn't work correctly. External display is distort, noisy.
After start of Vista is all right. But when I use blank white page monitor switch off and on in a circle. Monitor is in good order. Advence is in good order. (I change it 3 times).
Thank you for help or inspiration how to find a solution.

ok, i think i understand you now. you have an advance dock with a third-party PCI graphics card and can't get it to work under vista. my best recommendation is to try different drivers. i am not 100% positive but your PCI card might have to have the same GPU as your T61 to be compatible. perhaps someone else with more experience on this can help.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

HDMI output not working with AT200 under ICS

Hello
The HDMI output of my tablet AT200 doesn't work with any TV set.
My AT 200 tablet is under ICS.
I tried both HDMI configurations : full screen and video window. No effect at all.
I have red the post of denis48 and the response of MasterG and tried his propositions with no success
Is there somebody to help me please ?

Hi
I think you meant this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67654
The output should work as its described in the posting.
If it does not work, reset the tablet settings and try again

DVI-I to DVI-I and VGA Adapter work with Apple?

http://www.extron.com/product/product.aspx?id=dvihdmiadapters#features
This is an Extron product. I have a need to go from a Radion 9800 pro DVI-I to an apple 20" Cinema AND 32' LCD VGA.
Will this work with Apple?

Hi There,
Whenever I hook up a projector that doesn't work with my MacBook (when it shows just a blank, black screen), the first thing I try is going to System Preferences > Displays and setting the resolution of my desktop to 800x600.
Nine times out of ten, the projector starts right up and works perfectly.

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

Quicklook doesn't work with .avi files

Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
Please help me. If you need more info about specs or something i'll be glad to give them to you.
Thank you!!!

Also doesn't work with Grapher (.gcx) documents (an Apple format).

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android phone worked perfectly with my car. Even the tech guy at Lexus couldn't get it to work. What is apple doing to fix this.

The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

DVI to HDMI doesn't work with Panasonic Monitor

Similar Messages

Maybe you are looking for