DVI to VGA adapter Isn't it too short

I bought a MB Pro and I wanted to use the DVI to VGA adapter but it's too short, is there a longer one or is this it?

Maybe http://www.microcenter.com/singleproduct_results.phtml?productid=0201448 if you need a male-to-female. In other words, that product should work if the port on the TV has pins sticking out. If it has holes that pins should be stuck into, then http://www.microcenter.com/singleproduct_results.phtml?productid=0201735 is a male-to-male. Make sure you double check the photos against your adapter and your TV before you buy. Also try your local electronics or computer store.
dapeter2: Thanks for your clarification.

Similar Messages

  • DVI to VGA adapter too bulky

    the DVI-to-VGA adapter that came with my mini is too big in that it increases the footprint of the mini by more than an add'l inch (won't fit on shelf as a result). ..Is there a way to avoid this? Can you buy a VGA monitor cable that simply terminates with a DVI connector?
    Thanks for reading and - hopefully - replying.

    There are actually several different DVI/VGA adapters, not just the bulky one that Apple supplies. I have one, bought from Radio Shack a couple of years ago which is no bigger than a DVI connector on the back of the mini, but has a 6" lead, terminating in a VGA 'female', thus is still a suitable adaptor for the purpose.
    In the event you can't find a suitable one in the electronics stores or the usual places on line, http://sewelldirect.com/dvi-i-to-vga-360-degree-rotating-adapter.asp might be a suitable option.

  • DVI to VGA adapter. Too short?

    Hello.
    Please do not blame me for being ignorant, I recently had to do a project and in order to connect to the screen, I need to use a DVI to VGA adapter, which is provided when I bought my MBP.
    But then, isnt it too short? How do I connect it then? Must I buy a extension? Do help me as my project is due next friday and I must present next friday. Thank you.

    Allan Jones wrote:
    The sequence would be:
    Mac > Adaptor > VGA cable > Monitor or projector
    Right - except when actually hooking them up, they should be connected in the reverse of that sequence; the projector should be on and seeking an input, the cable and adapter should be connected, and the final step is to connect the adapter to the MBP.

  • Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

    I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
    Marc

    I think I solved this problem.
    It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
    1. Start > Control Panel > Appearance and Themes
    2. Display
    3. Go to tab "settings"
    4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
    This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
    Have a nice day!
    Message was edited by: BlakeTron
    Message was edited by: BlakeTron

  • Dvi to vga adapter?

    I want to connect a 20" VGA monitor to my Powermac dual 2.7. I looked in the Apple store and here's what they had:
    "The Apple DVI to VGA display adapter was specially designed to allow users to connect their DVI equipped PowerBook G4 or Power Mac G4 to an external VGA monitor or projector for 24-bit video-mirroring or dual display.. The DVI to VGA adapter plugs into the DVI port built into the new PowerBook G4 or into Power Mac G4s with NVIDIA or ATI Radeon graphic cards which feature DVI ports"
    Does Apple make an adapter for a G5 Powermac, if not, any suggestions on which one and where to get one?
    Thanks, Pete

    Yeah, I think you're working too hard.
    That one should be fine. I think you can only use one of them, as they're too wide to use one on each of the video card's ports. That's how it is on mine. Only an issue of course if you decide to use two VGA monitors.

  • Mini DVI to VGA Adapter Video Problem

    This year at Randolph-Macon College we replaced the Math lab Emac computers with IMac G5 Intel machines. The laboratory has an NEC model MT1050 projector with a manufacturer’s date of August 2002. We can not seem to get rid of ever present scan lines. We can slow them down and speed them up by adjusting resolution and refresh rates, but nothing will remove them. We are connecting the IMac to the projector via the Apple Mini-DVI to VGA Adapter. It is specifically designed for use with the iMac (Intel Core Duo), and the adapter connects to the Mini-DVI port of the computer and the VGA end of the adapter to an external VGA monitor or projector.
    Troubleshooting the problem we have swapped IMac Intel computers with no luck, but we still have to use the Apple Mini-DVI to VGA Adapter. When we hook the projector to a Intel Mac Book Pro, we have to use a different adapter, but then it works perfectly. In fact, everything we try using other adapters works fine, it’s just when we use the Apple Mini-DVI to VGA Adapter that we experience the video problem.
    Has anyone experienced this problem and if so, have you been able to remedy it?
    iMac (Intel Core Duo)   Mac OS X (10.4.8)  

    I don't have much to suggest, except to ask if you can try with a different mini-DVI to VGA adapter. (i.e. do you have more than one on hand to make sure yours isn't just defective?) Make sure it is firmly seated into the iMac.
    I use the same adapter to provide an extended desktop on an old CRT monitor and the display is great.

  • Using external Display via Mini-DVI to VGA Adapter does'nt work

    Hey Guys,
    i recently bought a mini-dvi-to-vga adapter.
    When I plug it into my macbook and connect it to my 19" external TFT, the MB recognizes the TFT as [Medion] MD30219PH but the display stays blank (no matter if i choose mirroring mode or extended desktop)...
    Already changed the Hz-Rate between 59.9, 60 and 75 Hertz and the Resolution also... but nothing happens.
    In extended Desktop mode i can even slide the cursor into the area where the display is supposed to be...
    Hope u can help me
    thx

    From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
    -Brian

  • DVI-to-VGA adapter disabled on HDMI-equipped monitors?

    Can anyone with an Apple DVI-to-VGA adapter on a Core Duo or Core 2 Duo (both at 10.6.8, currently and probably forever) still connect to a second monitor if the monitor also has an HDMI port? I could until early 2011. From 2008 to 2010 I could connect to every VGA monitor through the DVI adapter.
    I thought the DVI-out on my MBP died but got a newer MBP and it, too, doesn't work on any HDMI-equipped screens. Both computers and all my DVI-to-VGA adapters work fine on monitors without HDMI. Yes, I rebooted. No, it's not the cables. Again, all components otherwise work in other arrangements. I am not talking about any other setups. The HDMI-equipped monitors all work fine with miniDisplayPort-to-VGA plugs (today!) from newer Macs.
    Any work-arounds? Anyone have a best-recommendation on an adapter that works still?

    Thanks, BSteely, I have the latest QT and iTunes already. Closing the lid seems to kick the MacBook external display into some special mode that Front Row can't display videos in. For example, you get the Front Row interface, but as you select movies/TV shows, the preview window on the left side is blank. Open the cover, and have both displays going, and you can see the previews fine (and of course, you can see the movies/TV shows play fine as well when you click on them)
    Running Quicktime Player full screen works fine without Front Row in either open or closed lid mode. So it is apparently something wrong with Front Row itself.

  • I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

    I am considering a Apple iMac but would be interested in adding a second monitor. Does it have to be an Apple monitor or can i add any monitor with a thunderbolt cable and DVI or vGA adapter?

    I found that the Thunderbolt input accepts the mini-DVI (in my case converter to VGA for a tutorial use monitor)
    BUT, you have to really oush it in 'til it clicks.  I thought it too loose until I tried it.  works just fine!!
    i get a solved for my own  LOL
    Ed

  • No video signal using mini dvi to vga adapter.

    I just bought a macmini,the last generation. Separately I bought on the apple store a mini dvi to vga adapter because when I bought the macmini I forgot to buy that....once the adapter arrived I tried to turno on the mini,everything seems to be normal,the mini works,the audio signal is normal and after the startup it asks me to choose the language,but the screen says there's no INPUT SIGNAL. I tried another mini dvi to vga adapter,the vga wire works with my pc so I didn't try another one,I tried the reset of the mini,nothing....do I have to try with "miniport to vga" adapter or is there something else I can try?

    I got my Mac Mini yesterday and I am having the exact same problem as you are having.
    I've tried on two different TV's but it is just not sending a signal. Is it faulty?

  • Apple Mini DVI to VGA Adapter

    I purchased a Apple Mini DVI to VGA Adapter for my MacBook (early 2008).
    When I plug the cable into my MacBook it works fine, I have to drag the browser from my macBook onto my LCD using the curser. But when I do this with iTunes and I want to watch a film or music video there is no sound. Does anyone have any ideas of how to solve this problem or if im using it right.
    Please help.

    Ah. Okay. Well you need to output the sound from your MacBook to your TV. You need another cable to carry the audio. You can use an 1/8 mini audio to TOSLINK (if your TV supports optical audio input) or 1/8" to RCA audio (those red/white cables).

  • Mini DVI to VGA Adapter Issues

    Hey guys,
    My first ever post to the forums. I just recently bought my very first apple computer. It is a 2.4 ghz Macbook 13" and bought a Mini DVI to VGA Adapter so that I can connect it to my 46" Sharp AQUOS TV. I connect my laptop with the dvi to vga adapter plus another vga cable of course and all I get on the screen is my wallpaper but I can't see any of the icons on my tv screen, nothing.
    Can anyone help me on this? Does this sound like a familiar problem?
    I would appreciate your help.
    Thanks in advance,
    Dogan

    Hi DoDolom,
    First, welcome to Macintosh!
    Secondly, it sounds to me like what's happened is that OS X has extended your desktop onto a second monitor. Plug in an external mouse and keyboard and then close the MacBook's lid. It will go to sleep. Use the external mouse/keyboard to wake it up and you should be running on just the external display.

  • Mini dvi to vga adapter doesn't fit Mac Book port

    I bought a "mini dvi to vga" adapter at the local Apple store at the mall and it does not fit the mini DVI connection on my Mac Book. What is the correct mini dvi configuration or part number for the Mac Book Mini dvi port?

    It may be. I threw the bag out so I can't check. I was in a hurry and thought I picked up the right adapter but guess not.
    Thanks for your help. Know anyone that needs a mini vga to vga adapter?

  • Mini- DVI to VGA adapter Or is that, DVI to DVI?

    I am having difficulty figuring out which adapter to purchase if I want to use my MacBook to make a Keynote or PowerPoint Presentation with an LCD projector.
    Do I need the Mini- DVI to VGA adapter, or is it DVI to Video adapter, or DVI to DVI adapter? Good grief! I've made fabulous-looking slides and just want to take my computer to the lecture hall, connect it to their projector, and give my talk. How does one decide which cable to get, if I don't know for certain what kind of projector they are using?
    Aren't all LCD projectors standardized this way?
    Thanks for the clarification.
    ~ john

    As mentioned, VGA is much more common than DVI is on projectors, so the mini-DVI to VGA will certainly work more often than the mini-DVI to DVI will.
    It costs $19USD, so I would get both and use the best option available to you when you get to the location and see what kind of projector they have.
    You also may want to pack the VGA and a DVI cable just in case. You never know if the location will have one on hand, or if it gets misplaced just in time for your arrival.

  • Mini DVI to VGA Adapter M9320G/A on late09 mini

    Can I use an Apple Mini DVI to VGA Adapter M9320G/A on a Mac Mini Late 2009 ?
    Thanks everyone

    Yes.

Maybe you are looking for