DW CS6 Not allowed me to select again the + in the server behaviors

I worked with server behaviors normally yesterday but today it has not allowed me to work with them.
- I work with the tables in the database.
- I checked the site definition and is correct.
- I work with links normally.
The system works normally, except the server behaviors.
What should I do to display the + in server behaviors?

Hi, Ben:
The server is PHP and the document was opened with PHP.
I work with WAMP and the DB is MySql,  I checked that It was active and was working properly.
The connection to the DB was fine, also checked the site definition and it was good, I could work with everything in DW except the server behaviors. I turned off the system several times, because it could have been any open document, which avoiding the continuity of my work, but every time the problem was there.
Today was concerned that the work I have to deliver is short in time and I have to say, by some miracle of God, the system is working well now, but I am very nervous because if the problem happens again, I do not know which is the solution.
Thanks a lot.

Similar Messages

  • New computer, trying to re-install cs2 upgrade but not allowing me to select disc to upgrade from

    So I've had ps for years and have bought multiple upgrades since ps5.  I have all the discs etc....I have recently bought a new pc and have tried to reinstall my cs2.  It of course asks for the proof of original purchase by putting in the original ps5 disc.  Once I do, it will not allow me to select a file from the disc to use as proof.  Heck, not even sure of which file to select if I could, but I remember the last time I installed it on my previous computer, it automatically detected it and allowed me to proceed.  I have seen a few things about 64-bit, windows 7 and even mention of a DVD-rom drive.  Can someone please tell me it is possible to install this on my computer?!   If I have to buy another upgrade I'm going to puke!
    Thanks!!
    "Isn't the price of technology supposed to go down over time??"

    Thanks for the replys.  Here are the screens that I am getting.  The first screen is fine....I enter the CS2 serial number and then go to the second screen.   Here is where it asks for proof of upgrade from v5.0 or later.  I have the original 5.0 disc and I put that in.  Then I select browse.  The third screen pops and no matter what I select, the OK button never becomes usable.  It is always grayed out. 
    Now, I have tried to install 5.0 to my computer but can't get past the Install select screen as seen in sceenshot 4.  It won't recognize the exe for some reason.  I also tried copying everything to a folder on my harddrive and installing it from there but same thing, it won't get past the install select screen.
    it does sound like something to do with the optical drive but not sure what to do..
    Thanks for the help!!!

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Having a problem with noises and mouse jumping, tried to reinstall and computer will not allow me to select the correct install icon.  Sends me to xcode install

    my kids computer began acting up this spring...so I shut it down. 
    Would not stay turned off, various noises almost continually, jumping highlights, etc.
    Decided to reinstall os x snow leopard.  insert disc and icon appears.  then 3 icons with x in a column.
    automatically highlights middle icon and will not allow me to select one above.  Says install xcode.
    not what i want to do. 
    any help?

    What model iMac do you have?
    What version of Mac OS is it running? If you don't know, try to give approximations on when it was set up and whether it was ever updated so we can take our best guess.
    How are you trying to boot from the install disc? Your description of 3 icons with x in a column' leads me to believe that you aren't booting from the install disc, but rather you are inserting the disc after booting from the OS that is installed on the hard drive. If that is what is happening you'll see something like this, although it will vary depending on the actual version of the Install Disc that you have and how you've chosen to view the files (icon, list, column, etc).
    What happens if you restart the system with the Install Disc inserted, then quickly hold down the 'c' key so that the system attempts to boot from the Install Disc. Do you still experience the same issue?

  • When clicking on a lookup, firefor does not allow me to select from the list

    When I use firefox, the website I am on has lookup fields located on it, firefox does not allow me to select my preferred option from the list. also when I slect another lookup from a list it displays the message 'invalid lookup value located in field ......'
    This does not happen in IE

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • I am trying to upload a file to an accounting website for work. It will not allow me to select any type of file, they are all greyed out.

    I am trying to upload a file to an accounting website for work. My computer will not allow me to select any type of file, they are all greyed out.

    Try using a different browser. If it works, then the problem is most likely Safari. If the other browser doesn't work, perhaps it is the web site.
    Firefox

  • SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

    Hi there,
    Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
    Thanks,

    Hi,
    Per my knowledge,
    it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
    You can also filter the list view using SharePoint Designer,
    Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library option and check the Selected Artist - on

    I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top,
    it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library
    option and check the Selected Artist … one.
    I have changed the Sync option to Manually sync, but that does not help.
    How can I change this to the second option?
    Thanks.

    There is a checkbox above those two options for how to sync.  It says Sync Music; it enables automatic syncing.  That box needs to be checked before you can select from the two options for how automatic syncing is performed.
    NOTE:  If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
    So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
    Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting).  Please post back with more details about your situation. 

  • I stream video/audio from my iPhone to AppleTV and it works fine. I want to use headphones on the iPhone so I can stream the video and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one.

    I stream video/audio from my iPhone to AppleTV (like YouTube) and it works fine. I want to use headphones on the iPhone so I can stream the video to AppleTV and listen on the headphones, but Airplay will not allow me to select both AppleTV and headphones, I can only select one. How can I watch AppleTV and listen on the headphones?
    Thank you.

    have the same problem. Im using iPad 3 and Apple TV. id like to use the ipad as wireless earphones while i watch the video on the tv. is that even possible?

  • HT5071 I'm in the process of publishing my iBook to the iBookstore however when I try to choose the the file to publish I can view it but the file is faded out not allowing me to select it?

    I'm in the process of publishing my iBook to the iBookstore however when I try to choose the the file to publish I can view it but the file is faded out not allowing me to select it?

    Did you use the Publish menu to export an .ibooks fle?
    Check to see if you are trying to mistakenly select an .iba file.

  • Will not allow me to select on under wifi settings

    My phone will not allow me to select on under wifi settings.  It appears faded as if it is not a possibility.  I have tried turning off phone and have tried re-setting network settings.

    See this article: http://support.apple.com/kb/HT1925
    If none of the tips in that article resolve the problem you have a hardware failure, probably of the radio chip. If you take it to an Apple store they will replace it if in warranty, or for $199 if out of warranty.

  • How do I remove the Windows partition? Boot Camp Assistant does not allow me to select the remove option.

    I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?

    You can try removing it in Disk Utility.
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
    4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed. 
    You should now have a restored single volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • I bought a movie off of iTunes, but it will not play.  I click on it and the movie's menu shows up, but it will not allow me to select the "play" option.

    After purchasing a movie from iTunes, I clicked on the film and it brought me to the movie's DVD menu.  However, it will not allow me to select it to play.  I can select the "chapters" option, but I cannot select any of the chapters.  Essentially, it is stuck on the menu.

    Did the download complete?
    Resuming downloads from a computer
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    Click the "Check Downloads" button.
    Click the Resume or Resume All button, or the resume arrow to resume the download.
    from http://support.apple.com/kb/HT1725
    Try right clicking or Control clicking the movie and choosing Show in Finder.
    Can you Right click the movie and Open With QuickTime Player?

  • My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

    My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

    I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

  • I bought an album on my iPhone and it never transferred to my iTunes account. It has disappeared now and I'm not allowed to buy it again. How can I find my missing music album or have the option to purchase it again?

    I bought an album on my iPhone and it never transferred to my iTunes account. It has disappeared now and I'm not allowed to buy it again. How can I find my missing music album or have the option to purchase it again?

    Hello bubblegirl2,
    Thank you for the details of the issue you are experiencing with your purchased album.
    First, I recommend trying to download the album from you list of past purchases.  Use the steps in the section titled "Download previous purchases on Mac or PC > iTunes Store" in the following article:
    Download past purchases
    http://support.apple.com/kb/ht2519
    If you have tried those steps and still do not see the album, it may be that the album is hidden.  Follow the steps below in iTunes on your computer to check if it is hidden and unhide it:
    To unhide your purchases
    Open iTunes on your Mac or PC.
    If you're not already signed in, choose Store > Sign in.
    Choose Store > View My Account. (You may be asked to enter your password again).
    On your Account Information summary, scroll down to the "iTunes in the Cloud" section and click Manage.
    Choose a content type by clicking Music, TV shows, Apps, or Books from the top.
    Click the Unhide button next to the item you would like to restore.
    Note: If the item you are unhiding is not already downloaded on your computer locally, it will begin downloading automatically.
    iTunes Store: Hiding and unhiding purchases
    http://support.apple.com/kb/ht4919
    If you are still not able to download the album, you can report the issue with this purchases using the steps in this article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Can you set up an apple ID without a payment method?

    do you have to put in a card number?? or is there an option for none like there used to be?

  • Once connected ipod shows on desktop, not in itunes

    i just got a new macbook pro, and ipod classic. i've used a mac for the last 3 years or so, and i've never had this problem. when i connect my ipod to my computer, the ipod appears on the desktop, but is not recognized by itunes. how do i fix this?

  • Rules-based GATP with sales BOM

    Hi, with reference to the following thread which asks the same question, but although in "answered" status, actually contains no answer to the final question... GATP Question We are investigating the possibility of using GATP with rules-based ATP to

  • Update Overwrote iTunes Library File

    After I ran the update (as prompted) yesterday, then continued to play music on my computer all day, today I find that iTunes is not seeing my music.  I do have my music in an alternate location on my pc, but this has never been a problem.  When I go

  • Need advice purchasing auto feed photo scanner

    I'm looking for suggestions to purchase a photo scanner with auto doc feed that is very Mac friendly. The local photo shop uses *Kodak i1220* which is Windows-only. It is supposedly optimized for photos and does a much better job than the *Fujitsu 15