Dymob 450 Turbo labelwriter changes page widths and now only prints webpages as labels

I am running 3.6.8 on a pc-based desktop.
I print using a brother 2100 laser printer.
I installed dymo 450 turbo labelwriter yesterday.
I tried to print a webpage using firefox and it has truncated the page to the width of the labelwriter.
I've gone in and changed the printer margins in firefox, have reduced the scale and it still will only print 1 1/8" X 3.5" size sections.
I'm positive that I've selected the brother printer to print, not the dymo printer.

Shiva,
As I mentioned earlier, the reason we printed on A4 is to check if it is printed properly - margins on the top, right, left etc. And it printed fine.
So when I speak about the actual problem it's on the label printer. The label printer seem to take extra margin on the top. That's exactly the issue I am facing now. I just came across the following thread which talks about a similar issue. May be I need to check the label type defined in the drivers.
Printing on Dymo LabelWriter 400
Any inputs?
Thanks,
Anil

Similar Messages

  • P1100w has lost its wireless and now only prints by attaching a cable from my laptop.

    My HP Laserjet Pro P1100w was working fine in wireless mode, until one day the paper became jammed and I pulled it through the printer to release it.  Since then I cannot get it to work wirelessly and now have to use a cable from the usb port.
    Any ideas or help would be appreciated.

    Is the wireless light solid or flashing?
    Hold the cancel button and it should print a configuration page.  Does it have any valid IP information listed or does it have a 169.254.X.X IP address listed?
    I did not find a p1100w in consumer support, but I did find a p1102w printer.  Is this a p1102w model printer?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Changed network name and now e-print e-mail address doesn't work

    I have a 6500A Plus Deskjet.  I have an hpconnected account and changed my e-print e-mail address to something I would remember.  Then I changed the name of my network.  I have to get a new claim code ..... I enter it and when I try to choose my e-print addrss, it says that it is already been taken.  I was on the hp site within a half an hour of changing my network name.

    Hi rfmal1,
    Thank you for joining the HP Support Forums.  I understand that you needed to set up the ePrint feature of your Officejet 6500A after changing the name of your network.
    Your previous ePrint email address will not be available, once an ePrint email address has been used it is no longer available to be claimed again. I am sorry if this has caused any inconvenience.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to change the width and height of the visible part of the of the report

    I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
    Mostly using first 16-20 columns and others get suppressed.
    Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
    Even printing is not working correctly.
    Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.  
    Example: CrystalReportViewer1.Width = 200; - is not helping.
    Is there any other solution?
    Please let me know.
    Thanks
    Mahesh Patel

    Hi Yogesh,
    Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
    reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
    But problem with crystal viewer remain as it is.
    While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
    Thanks for your very good suggestion.
    Mahesh Patel

  • How to automate the changing of Width and Height of the document

    Hi,
    I just want to know if anyone already automate the changing of width and height of document(eps file).
    Thanks,
    Buddy

    Check out SetDocumentSetup from kAIDocumentSuite.

  • How to set Jspx page width and hight programatically ?

    Hi All ;
    i need to browse a jspx page has Different width & hight sizes ;
    Please Can SomeOne tell me ow to set Jspx page width and hight programatically ?
    Regards;

    In that case you need to use JavaScript.
    Resizing the browser window in JavaScript is done by using window.resizeTo(400, 400);
    I
    Thanassis

  • Okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks

    Hi sigrun from mo,
    If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    - Brenden

  • I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong?

    I turned of iMessage and now I want it back on and it's not working, I have changed my password and now I don't know what to do. Is there something obvious I am doing wrong? I have done this on both of my iPads and it hasn't let me go back on to iMessage on either of them.

    iCloud System Status
    Current
    iCloud: iMessage - Users Affected: Some
    11/18/2012 13:34 PSTUsers are unable to use iMessage. Normal service will be restored ASAP.
    iCloud: FaceTime - Users Affected: Some
    11/18/2012 13:33 PSTUsers may be unable to place FaceTime calls. Normal service will be restored ASAP.
    http://www.apple.com/support/icloud/systemstatus/

  • HT204053 My husband and I are divorcing and we have used his apple ID for our 2 apple tv's.  He changed his password and now I no longer have access to the 300 or more movies, tv shows and music.   He keeps saying that there is no way for us both to have

    My husband and I are divorcing and we have used his apple ID for our 2 apple tv's.  He changed his password and now I no longer have access to the 300 or more movies, tv shows and music.   He keeps telling me that , there is no way for us both to have it. So, since his Apple ID was the one programmed into our Apple TV's he has custody to everything.  I know there has to be a solution for this, because I can't be the be the only person this has ever happened too!

    Unfortunately the situation is thus...
    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
    Apple ID FAQs
    http://support.apple.com/kb/HE37
    I know it doesn't help you in your current situation... but you can leave Feedback for Apple here...
    http://www.apple.com/feedback/

  • I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    ?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

    pkg4ibm wrote:
    editing a url on the graphic...
    Not sure what you mean by that: is that URL in an image, or is it actual text?
    If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
    If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

  • HT1212 I changed my password and now it won't accept it.  I have the most recent update.  I think it's IOS7.02.  I know what password I used but it won't accept it.  Please help

    I changed my passwork and now I'm locked out.  I know the password that I used but it wouldn't accept it.  I have never synced to iTunes.  What to do?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • TS1702 I had to change my password and now my iphone says it does not recognize it

    I had to change my password and now my iphone says it does not recognize it...

    Hello KaitlinHertz3,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Log in to your email provider's website to ensure that the account is active and the password is correct.
    Restart your iOS device.
    Delete the affected email account from your device.
    Tap Settings > Mail, Contacts, Calendars.
    Choose the affected email account, then tap Delete Account.
    Add your account again.
    Have a nice day,
    Mario

  • I have changed my email address so I changed my Apple ID and password.  Just realised haven't changed icloud details and now can't access as don't know password or security questions.  Want to delete and set up on new Apple ID.

    I I have changed my email address so I changed my Apple ID and password.  Just realised haven't changed icloud details and now can't access as don't know password or security questions.  Want to delete and set up on new Apple ID.  Help please???

    In order to change the iCloud ID on your device you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I Need help. I Change My Number and now imessage don t work.

    I Need help. I Change My Number and now imessage don t work.

    Hi Ivonka88,
    Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers!
    - Ari

Maybe you are looking for