Dynamic Authorization Failed: DiconnectNAK

I have WLC 7.6 and ISE 1.2 Patch 6.
My use case is WLAN Guest Access with CWA. I have ISE Appliance 3395 (2 Admin/Mon, 2 PSN). Everything work fine so far.
But from time to time I get these strange message (it does not matter if I do a manual Session termination in the Operations Tab) Everything is configured in the right way, since normal CWA works (CoA is working fine, but not always...).
Here the corresponding Log-Entry:
0000001241 2 0 2014-02-28 11:11:37.241 +01:00 0000106595 5417 NOTICE Dynamic-Authorization: Dynamic Authorization failed, ConfigVersionId=53, Device IP Address=a.b.c.d, Device Port=42121, DestinationIPAddress=a.b.c.d, DestinationPort=1700, RadiusPacketType=DisconnectRequest, Protocol=Radius, RequestLatency=3, NetworkDeviceName=xx-WLC01, NAS-IP-Address=172.16.226.26, Calling-Station-ID=1C:AB:A7:96:7B:99, Acct-Session-Id=53105c2a/1c:ab:a7:96:7b:99/336136, Acct-Terminate-Cause=Admin Reset, Event-Timestamp=1393582297, cisco-av-pair=audit-session-id=ac10e21a00052f6953105f07, AcsSessionID=ise-04/182359788/9392, Step=11044, Step=11017, Step=11100, Step=11101, Step=11048, NetworkDeviceGroups=Location#All Locations#xx_VPN, NetworkDeviceGroups=Device Type#All Device Types#Wireless Devices#WLC Foreign, CPMSessionID=ac10e21a00052f6953105f07, EndPointMACAddress=1C-AB-A7-96-7B-99, Location=Location#All Locations#xx_VPN,
Has anybody ever had the same expirence, or is this a know issue?
Thanks for feedback!

Please go through the link below for best practice.
http://www.redelijkheid.com/blog/2013/4/2/cisco-ise-change-of-authorization-coa-not-working

Similar Messages

ISE Alarm (WARNING): Dynamic Authorization Failed for Device

Hi all,
I am posting this discussion as previous posts that I have found in this forum have never been resolved or the resolution is not applicable to me.
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is reffering to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which correcponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
Can someone suggest the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Runtime AAA & prrt-JNI.
I do not want to enable too much debug logs, so I was wondering whether anyone can help with a specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
Can anyone help?
thanks
Mario

Firstly, I wouldn't run a production deployment of ISE on 1.1.1.... 1.1.3 Patch 1 or 1.1.4 is the way to go.
Secondly, this error happen a lot, especially with Wireless, and it's not worth worrying about. I've had a couple of TAC cases opened for this and some similar errors, generally they're caused by a Client going to sleep, leaving the coverage area or otherwise leaving the WLC while ISE is trying to do something with it.
Only worry if you actually have a Client-impacting problem, which by the sounds of it, you don't.

ISE: Dynamic Authorization Failed

Hi,
I am gettning warning messages in ISE saying
Cause:
Dynamic Authorization Failed for Device: 0002SWC003 (switch)
Details:
Dynamic Authorization Failed
It is not only on that switch but on all switches I have configured. I am using 3560 IPBase 12.2(55)SE6. I have configured them according to Trustsec 2.1.
My end devices are none-802.1x.
I can't figure out what is causing this error.
The thing is that I have not experienced any problem. In Live Authentications there are some 'Unknown' and 'Profiled' devices hitting the DenyAccess rule, but other then that everying is beeing Authorized fine.
Anyone got an idea what could be causing this error?
Regards,
Philip

This is what I have found out.. Using ISE Version 1.1.1.268. If you go the logs page
Jan 10,13 7:39:12.147 AM
Dynamic Authorization failed
and then go to the details...
Failure Reason > Authentication Failure Code Lookup
Failure Reason :
11213 No response received from Network Access Device
Generated on:January 10, 2013 8:08:17 AM PST
Description
No response received from Network Access Device.
Resolution Steps
Check the connectivity between ISE and Network Access Device. Ensure that ISE is defined as Dynamic Authorization Client on Network Access Device and that CoA is supported on device.
...next check into Resolution Steps...

5417 Dynamic Authorization failed

Hi guys,
Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ?
When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow.
The error is :
Event
5417 Dynamic Authorization failed
Failure Reason
11103 RADIUS-Client encountered error during processing flow
Resolution
Do the following: 1) Verify shared secret matches on the ISE Server and corresponding AAA Client, External AAA Server or External RADIUS Token Server. 2) Check the AAA Client or External Server for hardware problems. 3) Check the network devices that connect the AAA peer to ISE for hardware problems. 4) Check whether the network device or AAA Client has any known RADIUS compatibility issues.
Root cause
RADIUS-Client encountered an error during processing flow
I checked all the resolution steps but the error sitll exsit.
I would greatly appreciate any help you can give me in working this problem

An internal error has been detected during the processing of an incoming RADIUS packet. Make sure that the client device is compatible with AD Agent, has been configured properly, and is functioning properly. Make sure that the same RADIUS shared secret has been properly configured, both in the client device and in AD Agent.
http://www.cisco.com/c/en/us/td/docs/security/ibf/setup_guide/ad_agent_setup_guide/ibf10_log_msgs.html

Dynamic Authorization Failed

hi
I keep getting error meesages on the ISE in regards to RADIUS
the error is
Dynamic Authorization failed : 1213 No response received from Network Access Device
i am using ISE version 1.1.1 and the NAD is a WLC running version 7.0.98.0
i use ISE to authenticate users via PEAP. I deleted the NAD and re-added it twice but i still keep getting this issue. this set up was working fine for the last few weeks.
i dont think location and device type would cause an issue to authentication under the NAD list
anyone have any ideas?

the option i.e drop down box wasnt there. lookin at the compatibility chart of ISE 1.1.1 and WLC, minimum version for WLC is 7.2.103.0
Do you need to have RADIUS NAC enabled if the ISE is only used to authenticate corporate wireless users against AD. there is no CoA,
the other function is to use RADIUS as network management logon. to WLC using the AD. depending on the AD group , one could get priv 15 or priv 5 access. i am also using device attribute by location so that remote offices network enigineer cannot log onto the WLC. i.e i created a NAD , put it in a location and use that location AND the AD group to qualify for priv 15 access.
Coudl this policy interrupt the wireless RADIUS policy? Wireless policy is at the top of the list under authorization tab.

Dynamic Authorization Failed - Posture with Guest Portal - ISE - WLC

Hello everybody,
I'm implementing a NAC solution based on Cisco ISE. Unfortunately, I'm facing a problem related to the CoA (Change of Authorization).
The guest can authenticate successfully via portal and then he is redirected to the page of client provisioning.
When he is compliant with the policy he gets access without any problem and this means that CoA works perfectly. The issue occurs when he has to remediate (download the file from ISE and install it). In this case, we need a change of authorization profile.
The authentication logs show that the posture status changed from non-compliant to compliant but the users doesn't obtain access .
Here are details :
Authentication Details
Source Timestamp
2015-04-30 18:43:13.179
Received Timestamp
2015-04-30 18:43:13.18
Policy Server
ISE-CISCO
Event
5417 Dynamic Authorization failed
Failure Reason
11213 No response received from Network Access Device after sending a Dynamic Authorization request
Resolution
Check the connectivity between ISE and Network Access Device. Ensure that ISE is defined as Dynamic Authorization Client on Network Access Device and that CoA is supported on device.
Root cause
No response received from Network Access Device after sending a Dynamic Authorization request
Username
User Type
Endpoint Id
E0:9D:31:07:**:**
Endpoint Profile
IP Address
Identity Store
Identity Group
Audit Session Id
ca0019ac00000003ae674255
Authentication Method
Authentication Protocol
Service Type
Network Device
WLC-1
Device Type
Location
NAS IP Address
172.25.0.202
NAS Port Id
NAS Port Type
Authorization Profile
Posture Status
Compliant
Security Group
Response Time
15002
Other Attributes
ConfigVersionId
4
RadiusPacketType
CoARequest
Event-Timestamp
1430415778
AcsSessionID
50149c2f-08fb-4f9d-b1b5-f655e71d039f
StepLatency
3=15001
Device IP Address
172.25.0.202
CiscoAVPair
subscriber:command=reauthenticate
audit-session-id
ca0019ac00000003ae674255
Session Events
2015-04-30 18:43:13.18
Dynamic Authorization failed
2015-04-30 18:41:44.159
Dynamic Authorization failed
2015-04-30 18:35:42.64
Guest Authentication Passed
2015-04-30 18:34:39.214
RADIUS Accounting start request

You can use LWA for this . he WLC redirects the HTTP traffic to an internal or external server where the user is prompted to authenticate. The WLC then fetches the credentials (sent back via an HTTP GET request in the case of external server) and makes a RADIUS authentication. In the case of a guest user, an external server (such as Identity Service Engine (ISE) or NAC Guest Server (NGS)) is required as the portal provides features such as device registering and self-provisioning.
Refer to the following link for configuration example
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml

ISE 1.2 - Dynamic Authorization Failed

Hello!
In my design network I use the ISE for CWA with a WLC, but when a client entrer his credentials, the CoA failed with this error : "11213 No response received from Network Access Device after sending a Dynamic Authorization request"
This error is really strange because I can contact the ISE from the WLC. My ISE, and my broadcasted network are in the same VLAN, is it possible that this error come from this network architecture?
My is is patched with the cumulative patch 7 and for information, I can do a "manual CoA" by disconnect/reconnect the client manually and after that the client has a network access.
Used configuration for ISE and WLC : http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/116087-configure-cwa-wlc-ise-00.html
Thanks in advance if you have the least clue to resolve this issue.
Kévin

I will perform some additional testing and let you know my results. I have this setup in the lab now with ISE 1.2 Patch 7 as well.... Since I only have a couple of PC's in the lab, I've noticed that I am unable to terminate the users session manually. So I usually end up stopping and restarting the services. This is how i clear my live sessions.
Is your setup in a Lab or Production? If its in a lab can you restart ISE and your WLC. I know when I first did my "debug client <mac>" My airespace ACL was showing the incorrect ACL ID. After a reboot of ISE and recreating my WLC ACL it went away. I haven't noticed my service IP ever showing up in ISE. I usually see the users MAC address then a [email protected] "User Authentication" with his IP. Next its the WLC MNGT Interface and finally the User Authorization again show Authz Internet-Only.
My lab does not always function 100% so I am hoping after we go Live this weekend, these flaky issues go away. One of my problems is I don't have internet access. Just a web server hosting a web page. I'll keep notes on anything I find that hopefully assist you.

RV320 Dynamic DNS failing

I have an RV320 I am testing in order to determine if it's suitable for use in the company I work for. We have several remote offices, and will be using IPSEC tunnels, VPN for IT troubleshooting and other features.
Dynamic DNS is returning
"Authorization failed(username or password)." error, although I think it's properly configured and works on
error, although I think it's properly configured and works on other firewall/router units. I have reentered the user, password and domain several times, each time it returns the same error.
Can anyone provide insight into the problem?
I also notice the options do not seem to include any way to use a Custom DNS, that is instead of xxx.dyndns.org it would be myhost.TLD. We have a bunch of xxx.dyndns.org, but do have a few myhost.tld. I hope this is something that could be fixed.
Thanks,
Jeff

Hi Jeff,
I think that the issue is that the PW is too long. I recall a case a while back where a customer had a passord over 20 characters and he had to shorten it. My recollection is not great, but I think that 18 was the limit. A feature request was made to lengthen the password field but no change was made due to hardware or maybe OS limitation. I think that the router was the RV042, which has similar code to the RV320. Sorry I can't be more specific. I would try changing the password at least temporarily to see if it works.
If you would like to make a feature request, please call support and open a case.
www.cisco.com/go/sbsc
- Marty

Analysis Authorization failed for Multiprovider

Hi all,
We are facing an issue pertaining to the Analysis Authorization for a multiprovider. When we attempt to access a query base on a multiprovider, the program complains that it has insufficient authorization. So we did debugging in the customer exit and we realise it fails to populate the rest of the authorization variables in I_step = 0. Base on our initial investigation this only happens on queries on multiprovider, so is there anything I need to set or do to curb this error?
Many thanks!

Best solution is to trace the authorization for your issue in ST01.
Switch on the trace in ST01 and start your work. if you face authoirzation check failed. look into the trace there you will find the logs and authorization failed for your userid.
And one more thing, have you got anything in SU53 as authorization check failed?
Hope this would help you.

Authorization failed when trying to connect Hyperion to BW 7.0

Hello gurus,
Using Hyperion interactive Reporting Studio, I try to access BW cubes.
I select OLE DB as connection type and SAP BW OLE DB provider, I am prompted for a BW system to connect to.
I then get the following error message:
OLE Error: 80040e4d
Error Source: MDrmSAP.2
Error Desciption: Authorization failed.
Using the same BW provider and the same BW user, I am able to connect form Excel.
So I wonder what the problem is.
Help really appreciated.
Alex-

Hi Ingo,
I do not get any error while using the Universe Designer, I get this error when trying to connect a SAP BW related universe in Crystal Reports. There is no problem at all with WebIntelligence by the way. It is possible to connect a SAP BW related universe in WebIntelligence.
I use BO XI 3.0 with Crystal Reports 2008 and the SAP Integrations Kit client components are installed on the client machine.
Nevertheless the BO Enterprise system is not configured with SAP Authentification, but with an own authentification.
Best Regards,
Thomas

10.6.4 Server L2TP VPN using external RADIUS - Authorization Failed

I'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah mays

I'm using 10.6.4 with VPN L2TP configured successfully using local user database for authentication. Now i want to configure the VPN to use Steel Belted Radius server for authentication (that hooked up to another LDAP server) for authentication.
I've configured the VPN service to use the radius server, authentication to radius is occurring but i'm getting errors that the user is not authorized to use the VPN service.
Is there a way to configure 10.6's VPN service to authorize any user that successfully authenticates against Radius?
NOTE: I've played around with Server Admin's access for VPN, with it set to all users, everyone ect, this did not make any difference to the error i'm getting from the vpn service.
Here's the log out put when the connection fails.
2010-08-27 12:52:34 PDT Loading plugin /System/Library/Extensions/L2TP.ppp
2010-08-27 12:52:34 PDT Listening for connections...
2010-08-27 12:52:39 PDT Incoming call... Address given to client = 192.168.105.1
Fri Aug 27 12:52:39 2010 : Directory Services Authorization plugin initialized
Fri Aug 27 12:52:39 2010 : L2TP incoming call in progress from '[ip address redacted]'…
Fri Aug 27 12:52:39 2010 : L2TP received SCCRQ
Fri Aug 27 12:52:39 2010 : L2TP sent SCCRP
Fri Aug 27 12:52:39 2010 : L2TP received SCCCN
Fri Aug 27 12:52:39 2010 : L2TP received ICRQ
Fri Aug 27 12:52:39 2010 : L2TP sent ICRP
Fri Aug 27 12:52:39 2010 : L2TP received ICCN
Fri Aug 27 12:52:39 2010 : L2TP connection established.
Fri Aug 27 12:52:39 2010 : using link 0
Fri Aug 27 12:52:39 2010 : Using interface ppp0
Fri Aug 27 12:52:39 2010 : Connect: ppp0 <--> socket[34:18]
Fri Aug 27 12:52:39 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : lcp_reqci: returning CONFACK.
Fri Aug 27 12:52:39 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x7e9db3cb> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x55fc9b88> <pcomp> <accomp>]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoReq id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : sent [CHAP Challenge id=0xc8 <086a03234947113037497f4326585a1f>, name = "OSX SERVER"]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoReq id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : sent [LCP EchoRep id=0x0 magic=0x55fc9b88]
Fri Aug 27 12:52:39 2010 : rcvd [LCP EchoRep id=0x0 magic=0x7e9db3cb]
Fri Aug 27 12:52:39 2010 : rcvd [CHAP Response id=0xc8 <5ad3c0cb063694e473f51c9252e007f400000000000000003701b4fa8e7b844e072cddeceefa73 173d7415c85cae976700>, name = "USERNAME"]
Fri Aug 27 12:52:40 2010 : sent [CHAP Success id=0xc8 "S=934D6E79F45791A61C378789A4D719BC6F249574"]
*Fri Aug 27 12:52:40 2010 : CHAP peer authentication succeeded for USERNAME*
*Fri Aug 27 12:52:40 2010 : DSAccessControl plugin: User 'USERNAME' not authorized for access*
*Fri Aug 27 12:52:40 2010 : sent [LCP TermReq id=0x2 "Authorization failed"]*
Fri Aug 27 12:52:40 2010 : Connection terminated.
Fri Aug 27 12:52:40 2010 : L2TP disconnecting...
Fri Aug 27 12:52:40 2010 : L2TP sent CDN
Fri Aug 27 12:52:40 2010 : L2TP sent StopCCN
Fri Aug 27 12:52:40 2010 : L2TP disconnected
2010-08-27 12:52:40 PDT --> Client with address = 192.168.105.1 has hungup
Message was edited by: sarah mays

Dynamic authorization in Integration Gateway with SMP 3.0.3

Hi All,
we have SAP ECC as backend system, we created service in ECC and added service in gateway cockpit. Now i can get the data from backend ECC using gateway cockpit URL.
My doubt is
While creating destination for ECC in SMP Gateway Cockpit, we have to give credentials for basic authentication. While calling service of SMP Gateway Cockpit , It is going to ECC with the user name given in Gateway Cockpit and giving the data authorized by same,
How to make the dynamic authorization.
Thanks
Suresh
Tags edited by: Jitendra Kansal (Moderator)

suresh babu
I followed the steps mentioned by you.
1. Added a HTTP/HTTPS authentication provider to "SAP" security provider.
https://sapes1.sapdevcenter.com:443/sap/iwbep?sap-client=520
2. In the gateway cockpit. modified the destination details:
3. When i open service document, there is no pop-up. Did i miss something i between?
Regards,
JK

Webservice call from PCo; FaultException: Authorization fail

Hi,
I am making a ME Webservice call from PCo.
I have configured Destination System, added a service in Configuration tab.
Using 'Test request message', i tested the call with all required inputs, the object is created in ME system.
When the same service is triggered from PLC > PCo, the call fails and i see the following message in Log tab.
UserName/password is correct..
All the required systems are running.
Log:
ME Dispatcher Could not dispatch Message [id = 75c405c5-24d4-4f70-b19a-87f6b6ae0413].
FaultException: Authorization failed. Please check security log for details.
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at SAP.Manufacturing.Connectivity.WSDestination.WSDestination.Send(Guid notificationID, Dictionary`2 requestValues)
   at SAP.Manufacturing.Connectivity.WSDestination.WSDestination.Send(NotificationMessage message)
   at SAP.Manufacturing.Connectivity.Dispatcher.ProcessMessage(NotificationMessage message, DestinationBase destination)
   at SAP.Manufacturing.Connectivity.Dispatcher.DispatchMessageExecute(Message message, Boolean unlockMessage, Boolean& stopDispatcher)
Am I missing anything?
Version:
ME: 6.1.4.9
PCo: 2.3
Thanks,

Hello Shridhar, I guess you can use use different user for authentication and user data inside XML request.
In MII, I have used MESYS for authentication and other user name inside the request XML. But you need to make sure user name inside XML has ME_Integrator role.
<me:UserId>USERID</me:UserId>
Hope this helps.
Thanks
Hari

Dynamic Authorization in Analysis Authorization

Hi All,
We are planning to migrate 3.x Authorization Migration to Analsysis Authorization. We have implemeneted Dynamic Authorization
concept which is using Customer Exit Variable. Now Kindly Guide me how I can retain the the same Dynamic Authorization Concept in New Analysis Authorization.
Regards,
Amit

Hi Amit,
Below article will helpful:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f9f33c-0f17-2d10-d3a2-ae52ccd00780?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f762d1-538b-2d10-1695-899a8bb165df?QuickLink=index&overridelayout=true
Hope this helps!
Amandeep Sharma

3850 Stack - "Authorization Failed" from Console

Hello,
I have a stack of 3 x 3850s. All connected up via the stack cables. I have the Primary Active Switch, The Standby and Member.
When I connect a console cable into the Primary Active I get access to the stack. If I connect to any of the other 2 switches in the stack via console I just keep seeing authorization failed.
I disconnected all the switches from the stack (it's a lab environment) and was then able to access each switch via console. The issue with Authorization Failed only seems to be apparent when they are stacked. I have another stack of 3850s which allows me access to the CLI from any of the stack members.
Anyone came across this slight issue?

Hi,
Try these commands:
Switch(config)# redundancy
Switch(config-red)# main-cpu
Switch(config-r-mc)# standby console enable
Switch(config-r-mc)#
You need Cisco IOS XE 3.2SE or later.
Link:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/ha_stack_manager/command_reference/b_hastck_3se_3850_cr/b_hastck_3se_3850_cr_chapter_010.html#wp2758849103
HTH

Dynamic Authorization Failed: DiconnectNAK

Similar Messages

Maybe you are looking for