Dynamic Configuration File Names

Hi,
I have a RFC->XI->File scenario.
I have to put the target files names based on the calculation of values in 2 fields in the input.
I tried using Dynamic Configuration in my message mapping for this.
This is the code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(u201Chttp://sap.com/xi/XI/System/Fileu201D,u201CFileNameu201D);
String MyFileName = a + "_" + b +".xml";
conf.put(key, myFileName);
I checked ASMA in both the sender RFC adapter as well as the receiver file adapter.
But it never works.
I saw the dynamic configuration tab in SXMB_MONI but i can see only the RFC destination parameter.
Cant see the file filename parameter.
What is the problem here?

No need enable ASMA on RFC sender adapter.
See if the file channel is activated after selecting ASMA with FileName.
The UDF might not be use in the mapping. Check this.
Edited by: Praveen Gujjeti on Feb 23, 2010 1:05 AM

Similar Messages

Dynamic Receiver file name in AS2 adapter

Hi Experts,
How to get dynamic receiver file name in AS2 adapter. We need receiver file name same as of sender file name.
We tried selecting dynamic attributes file name but we are getting followin error in CC.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Mandatory attribute dtAS2FileName is not present in XI message., Mandatory attribute dtAS2FileName is not present in XI message.
Thanks,
Hari

hi hari,
You can't do it manually. As both adapter are in different context.
You can go with UDF to slove ur problem.
Just extract the input file name using Dynamic configuration
Store that in some variable.
Use same name in the dynamic file name in AS2 receiver. Below code might be useful.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://seeburger.com/xi/common/dtAS2FileName", "DYNFILENAME");
conf.put(key,strfilename);
Thanks
Jai
Edited by: Jaideep Baid on Apr 9, 2010 9:16 AM

Dynamic Logo file names in PO XSL-FO stylesheet

We have different company logo files for different operating units. Hence , we require to use a dynamic logo file name in XSL-FO template.
When I use the below for a single file it works.
<fo:inline>
<fo:external-graphic content-width="50pt" content-height="50pt" src="url({'${OA_MEDIA}/Logo_medium_COMCEL.jpg'})" />
</fo:inline>
However, I would need to make the filename dynamic.
When a tried usng an xsl variable tos tore fielname, it didnt work.
Any pointers as to how we can achieve that would be helpful

Thanks for your quick reply Dave, I appreciate your time.
But I couldn't test the new template as I was neither able to create a new PO nor was able to run the PO Output for communication Report. When I tried to create a PO the Purchase Order form did not open saying I am not setup as an employee, even the PO Output for communication did not give any LOV for the PO's.
I tried to define employee name in the employee's login
information (System administrator/Security/User/Define) for my user, but some how my name doesn't appear in LOV. Any help is appreciated.
Thanks,
Sharmila

Include the file dynamicly by file name

in my jsp,I want include another jsp dynamicly
<%@ include file="thefile.jsp" %>
thefile.jsp should be dynamic like:
<%=String filename=="thefile.jsp" %>
<%@ include file=filename%>
I know above is not working since file only take static name.
is there any way to include the file dynamicly by file name?

String path = "..."; // to the ressource to include
javax.servlet.RequestDispatcher dispatcher
= getServletContext().getRequestDispatcher(path);
dispatcher.include(request,response);

Creating dynamical flat file name in mapping?

Hi.
I know about the variations on how to use an input parameter and/or sysdate to create a dynamic output file name in a mapping.
My challenge is nearly the same, but I cannot make OWB generate the correct code.
Problem:
- got a one column table that holds an identifier in a string field
- got a function that reads and returns said identifier
- imported function into OWB
- trying to use the function call in the Flat File Operator's Target Data File Name, e.g. fixedfilename||fn_get_id()||sysdate||'.ext
OWB creates the code:
UTL_FILE.FOPEN(
'my_location',
'fixedfilename'||fn_get_id()||'_'||SYSDATE||'.ext',
'w',
32767
However, when compiling the package code, it returns the warning:
ORA-06550: PACKAGE BODY, line 2214, column 29: PLS-00201: identifier 'FN_GET_ID' must be declared
which results in an error when trying to execute the mapping.
I've tried substituting the function call in the FOPEN call:
myId := fn_get_id();
UTL_FILE.FOPEN(
'my_location',
'fixedfilename'||myId||'_'||SYSDATE||'.ext',
'w',
32767
and this works fine, the mapping creates a file with the desired filename. But obviously not a good solution rewriting the generated code all the time....
Anyone solved something similar?
Could I use an input parameter and the autogenerated function GET_<PARAMETER>?
But can I set the value of an input parameter inside the very same mapping?
Regards,
-Haakon-

(It always helps writing out one's problems...)
I managed to get it working :-)
Added an input parameter to the mapping, and gave the outgroup variable a default value by calling my imported function.
Then concatenated the implicitly generated function (GET_PARAMETER) in the Target Data flat file name.
I now have a target file name that changes according to a departement id stored in a parameter table.
Regards,
-Haakon-

Dynamic attribute file name

Hi All,
I am trying to use dynamic attribute file name using UDF in message mapping:
String filename = null;
filename = "Yahoo";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://seeburger.com/xi/common" , "dtSubject");
conf.put(key1,filename);
return "";
But its just giving me the name on the receiver side as in the sender side.
I have checked FileName in Dynamic attributes in the reciever adapter.
Regards,
XIer

your return statement looks like return "";
Return the filename that you have assigned inside the UDF and can be achieved by
conf.put(key1,filename);
return filename;
Do refer this blog as well
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

Dynamic Configuration-File to File in scenario

Hi Experts,
As per the requirement needs to supress the numeric extensions of the files and transfer to the receiver.
Example: file name is XXX123.txt , but after picking up by sender communication channel in XI that file needs to converts XXX.txt and transfer to the receiver. Finally in the receiver end the file name should be Mahesh.txt only.
Please share the inputs how to do dynamic configuration in XI in File to File scenario.

Hi,
First you need to have a UDF as shown below. No need to put any arguments in the UDF.
public String getFileName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//get file name in string s
String s = conf.get(key);
//remove all numeric values
int i,l;
l=s.length();
String a="";
for(i=0;i<l;++i)
if(s.charAt(i)>='0' && s.charAt(i)<='9')
continue;
a=a+s.charAt(i);
s=a;
conf.put(key, s);
return s;
Now you need to map this UDF to any root element or dummy element of the target XML structure.
Ensure that
1. Sender Comm Channel has ASMA and file name ticked
2. Receiver Comm Channel has ASMA and file name and "fail if ASMA missing" ticked
3. in receiver communication channel -> File access parameters-> File name scheme -
> put any value say "*". This step is not compulsory.
Hope this solves your problem.
regards
Anupam

Dynamically generating file names for 2 File ( 1: 2 mapping transformation)

Hi ,
I have a scenario Proxy to File(FCC) with 1:2 transformation in message mapping ie 1 sender and 2 receiver interface ....
1 Message mapping
1 Operation mapping
1 RD , 1 ID and 2 file receiver channels and 2 receiver agreements.
I need to dynamically generate the filename say abc.(first 9 characters of mesg id) and xyz.(first 9 characters of mesg id)
I used dynamic configurations with ASMA settings, created 2 UDF assigned each of these to header node of r receiver message types.
Here, I guess the second dynamic configuration is over writing the first dynamic configuration and hence creating only one file with xyz.(first 9 characters of mesg id)
name .
Need your valuable inputs
Thanks and regards,
Pavithra

As dynamic configuration doesnot work in case of 1:n mapping what you need to do is
Create a field Filename in your source data structure
Create a1:1 mapping between your source structure and source structure
In that 1:1 mapping on the target structure assign UDF for file name
Now this target structure will be used as a source structure in your next 1:2 mapping
Under operation mapping add first the 1:1 mapping for source and then the multimapping
regards
Ninad

Need help with Dynamic Excel File Name please.

I am try to output an excel file with dynamic date.
Here what I done.
I am using SQL 2012.
Create Execute SQL Task Connect Type: Excel
Create Data Flow Task set to DelayValidation: True
Create OLE DB Sourc
Create Data Converstion
Excel Destination
Excel Connection, Expression, select ExcelFilePath
@[User::sXLFilePath] + @[User::sFileName] + RIGHT("0" + (DT_WSTR, 2) DATEPART("DD", GETDATE()), 2)+ RIGHT("0" + (DT_WSTR, 2) DATEPART("MM", GETDATE()), 2) + RIGHT((DT_WSTR,
4) DATEPART("YYYY", GETDATE()), 2) +".csv"
C:\ExcelOutPut\SOX_CAM_SQL_Report_010215.xls
What I try to accomplish is output the file with each day append to it, date must be DDMMYY.
I google it and found many samples, tested it, and none of them is work for me.
Any suggestions or some examples to share is greatly appreciate.
I am new to SSIS. I found one poster have similar issue and inside the posted below, there was one suggestion to create variable and connection string but how do I bind that variable to Excel Connection manger.
Please help.
Thank you so much in advance.
Ex: SOX_CAM_SQL_Report _020215.csv
SOX_CAM_SQL_Report _030215.csv
--Similar issue:
https://social.msdn.microsoft.com/Forums/en-US/bda433aa-c8f8-47c9-9e56-efd20b8354ac/creating-a-dynamic-excel-file?forum=sqlintegrationservices
Suggestion in the above posted but where can bind this to Excel Connection Manger.
Please help provide step by step. Thanks.
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=c:\\temp\\" + "ExcelTarget" + (DT_WSTR,4)DATEPART("yyyy",GETDATE()) +
".xls" + ";Extended Properties=\"EXCEL 8.0;HDR=YES\";"
And yes, as you were intimating, the delay validation on the dataflow should be set.

Hi NguyenBL,
According to your description, you created ssis package to export data from database to excel, when the package runs, you want to create new excel and name the file with time stamp. If that is the case, we can achieve the goal by following steps:
Create a script task used to create excel files.
Create a data flow task to export data from database to excel.
Add OLE DB source to data flow task.
Add Excel Destination to data flow task.
Create connection manager for OLE DB and Excel.
Click Excel Connection Manager, in Properties window, click (…) button next to Expressions, then set ExcelFilePath with expression like below:
"C:\\ETL Lab\\CreateNewExcel\\ExportData_"+REPLACE((DT_STR, 20, 1252)(DT_DBTIMESTAMP)@[System::StartTime], ":", "")+".xls"
For detail information, please refer to the document:
https://sqljourney.wordpress.com/2013/01/12/ssis-create-new-excel-file-dynamically-to-export-data/
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Dynamic source file names

Hi all,
I am planning to load data from a flat file using an external table in an OWB mapping. Will my mapping work correctly if my file name changes at every load...as an example file name in October is sales_200310 in november it will be sales_200311.
In case OWB cannot handle this kind of variable file name then does it allow to include a pre mapping script (shell script or batch command) to change the flat file name to a standard name each time the mapping is executed.
Pls. suggest a workaround for this problem.
My environment -- Oracle 9i, OWB 9.2
Thanks in advance.
Regards,
Amit.

Amit,
OWB does not support dynamic file names at the moment. You will have to rename the file(s) into a static, pre-defined name either by running a pre mapping process in the mapping or by running an external process from a process flow.
Regards:
Igor

Dynamic XML file names in ODI

Hi All,
Is there a way can we call the XML names dynamically.?
Here is the Scenario,
I have multiple XML files of same structure to be loaded into an Oracle table.
I have first created a XML dataserver and have given the exact path and the file name for reversing the XML model for the first time. The JDBC url was,
jdbc:snps:xml?f=/xml/file/#XML_TEST.FILE_TEST.xml&s=XML_TEST&dod=true&ro=true
After reversing i have changed the JDBC url of the XML dataserver to,
jdbc:snps:xml?f=/xml/file/#XML_TEST.var_FILE_NAME.xml&s=XML_TEST&dod=true&ro=true
I have created a variable *#XML_TEST.var_FILE_NAME* to get all the XML file names.
After that i tried to view the data from the datastores present under previously reversed XML model, but was getting the following error :
java.sql.SQLException: While generating the DTD from the XML file, a org.xml.sax.SAXParseException exception occurred saying: Document root element is missing.
Do I need to change anything in the XML model or in the Datastores?
Warm Regards,
VBV

Since you are using the Variable ,when you right click and view datastore its missing the required path of the file, as value of the variable is not determined , to do so you need to either refresh or set the variable and call the interface or other ODI objects and in loop keep reading XML files one by one and that should work.

Flat file to Oracle: Dynamic flat file name

Hi,
I am doing a transformation from flat file to oracle.
At one place there is requirement like flat file name is dynamic.
*eg. D:\ Flat DB\ Sample<Date>.txt
examples may be like Sample09012012,Sample08012012 *
As in physical schema we specify name of file is there any way by which we can specify dynamic file name.
as stated above.
Any help and suggestions would be appreciated.

Hi,
Yes you can specify a variable in the file name ( the resource name filed) .
You need to refresh the variable in a package and then use the interface to pick data from the file .
Thanks,
Sutirtha

Dynamic flat file name as source

Hi All,
I working on ODI 11g 11.1.1.3 version.
I have Flat file say ABC01 as source, flat file was successfully load into target.
But next day new file say ABC02 with same structure was generate from client.
Every day new file is generate say ABC03, ABC04 and so on.
how to use this file to load data, without changing file name.
dynamically can it is possible.
Please give me suggestion.
Thanks in advance
Prashant

Hi Prashant,
You can achieve this by doing the following :
1. Create a variable Called FILE_NAME
2. Go to your file datastore and replace the Resource Name with variable #FILE_NAME. So you need to pass correct file name to the variable.
3. To get the filename into variable , you can look into the following thread
Read FileNames in Directory
Hope it helps

Dynamic Sender File Name

Hi,
Its a File to ABAP Proxy Scenario.
The files would be processed differently depending on the file name which would be dynamic.
It would suffice if the file name can be made visible in the payload.
Does any one have any idea on how to implement this without creating a file adapter module? This method would make it complex.
Thanks,
Rosine.

Hi,
If yor are on SP14,
pls have alook at below blog.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
if you are lesser SP level, than
1. you can ask for the file name in payload from source.
2. You have to use adapter module for the same.
Regards,
Satish

Dynamic Configuration File Names

Similar Messages

Maybe you are looking for