Dynamic event registrati​on wont work with Tab control

In LTR volume 11 No1 we find the "Dynamic Event Handling.vi".
I had placed the controls on a Tab control and now this example wont work.
Is there a solution to this problem?
Scientia est potentia!
Attachments:
Dynamic_Event_Registration.vi ‏51 KB
Dynamic_Event_Registration(controls_on_Tab).vi ‏64 KB

Yes. The first stage of the code registers mouse down events for all the controls. When you added a tab control that meant that a mouse down event was registered for the tab as well. So now when you click on an object on the tab LabVIEW must decide whether to fire the mouse down on the tab-event, or the mouse down on the object on the tab event...It goes for the first but since there is no description for the tab no dialog will be displayed. If you add a description for the tab you'll see that it fires the event with the tab and you get a dialog with the tab description.
So - how to fix. Well, it's not that simple, one might think that to exclude the reference to the tab when you register the events would do the trick, but it rather seems that LV will always t
hink mouse clicks are on the tab and not on the objects on the tab.
The solution though is to get the references to the objects by reading the controls on page property of the tab control. So instead of reading the controls array from the front panel read the pages references of the tab and then the controls on page array from that and then register mouse down events on that array.
MTO

Similar Messages

  • External isight wont work with imac g4

    Hello,
    I recently purchased a second hand isight camera using ebay.
    I have an older imac g4 and the isight wont work with it at all.
    I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
    I'll explain exactly what happens and my troubleshooting so far...
    The imac G4 is powered off, I plug in the external isight via firewire 400
    The imac boots up into leopard 10.5.8 (using leopard assist)
    In system profiler the isight is listed under the firewire tab.
    ( I can post system profiler info on this if its needed)
    When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
    Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
    sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
    Skype doesnt work.
    I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
    I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
    My G4 is connected via ethernet to an external router.
    The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
    I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
    (oh I used the application isight updater in core services but the install button is greyed out)
    Any help would be amazing!!
    Thanks!!!

    Well, about all you can do would be to try a different and known good
    FireWire cable, as a replacement for what may be a defective FW400
    cable that came with the iSight camera. The cable can be defective
    with one bad wire, yet sometimes appear available to the computer.
    • How to Troubleshoot iSight (note external vs internal)
    http://support.apple.com/kb/ht2090
    • iMac G5 (iSight), & Intel-based iMac: Using External video camera:
    http://support.apple.com/kb/HT2819
    If you know of someone with an older Mac without a built-in iSight
    camera, to test that one on, this may be an OK idea. Not sure if you
    could get any traction by taking the camera to an Apple Specialist
    and ask if they could check it out for you; that may also cost you.
    {And since your computer does not officially support Leopard 10.5,
    the other avenues of support would probably not be open to you.
    At least not with the old iMac G4 and an unsupported 10.5 install.}
    I have an external iSight camera which was included with my G4 Mini
    1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
    But I really have no need for it, since I don't use photobooth & so on.
    And haven't tried that with my iMac G4 computers at all. No need to.
    With a computer not equipped with an iSight camera, the Leopard 10.5
    installation should still support the eventual addition of one; even if the
    computer itself appears to not officially support a Leopard 10.5 install.
    (You refer to Leopard Assist, a means to install in slower CPU Macs.)
    The FW cable is about the most easy to consider at this point.
    In the course of a year, I've found good replacement cables at
    several places, even those at thrift stores in perfect shape, work
    and I use them for FW external hard disk drives, primarily. To have
    spares is nearly always a good idea. Test & keep known good ones.
    I'm not certain how the external iSight FW camera may work on
    a newer Intel-based 24" iMac with a built-in iSight camera, too.
    Does your 24" computer have FireWire 400+800 ports? Can you
    choose an external iSight camera and ignore the built-in one?
    These secondary topics have probably been discussed in the other
    forum area for Intel-based iMac computer models; if you chose to
    try & use that camera with a model computer with one built-in...
    • Apple - Support - Discussions: for Intel-based iMac
    http://discussions.apple.com/category.jspa?categoryID=189
    There is a possibility, if never tried and the iMac G4 computer was
    acquired second-hand, that the FW port within it may be band; but
    the cable is the first item since it is cheapest, in troubleshooting.
    So, anyway, the hour is late here (1AM) so hopefully the matter
    can be resolved with a known-good replacement FW400 cable.
    You should not have to restart the iMac G4 (800?) model in order
    to get a FireWire item to be recognized. It should appear in the
    System Profiler's list under FireWire, such as things normally do.
    Of course, the camera could be defective as well. Been some
    time since they were available on sale, new from Apple...
    You could ask around to find out if there is a way to use that
    external iSight camera with your newer Intel-based 24" Mac
    by someone having it ignore its own built-in camera; in a
    way as to not affect its normal operation, that is.
    Good luck & happy computing!
    +{ edited 2x }+

  • I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong

    Hi Mark,
    I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
    Mick

    Moving this discussion to the Downloading, Installing, Setting Up forum.
    Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased.  You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.

    What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

    Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
    Original message----
    From : [email protected]
    Date : 25/01/2015 - 11:53 (GMTST)
    To : [email protected]
    Subject :  How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.
        How can I get RAW pictures to open in PSE 12 and PSE 13?  I have installed the plugin 8.7.1 but it wont work with either.
        created by susanl96972449 in Photoshop Elements - View the full discussion
    Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken.  So I am presuming that means it is installed and no further action required?
    Here's my problem:  I have had no problems  getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week.  Suddenly when they are imported all I see is the timer icons but they don't open to let me view them.  If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
    Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair.  So anyone out there experienced this and can give me some advice? Please?
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

    I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim

    Hello Aaron1658,
    It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/ts3424
    Symptoms
    Your iPhone may display one of the following messages when you attempt to activate it:
    "Your iPhone could not be activated because the activation server is temporarily unavailable."
    "The SIM card inserted in this iPhone does not appear to be supported"
    "The iPhone is not recognized and cannot be activated for service."
    "iTunes was unable to verify your device."
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
    If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Skype wont work with my mac os 10.5.8

    afternoon, tried to download skype on my power book g4 and it after download I try to open the dm and it says wont work with this artitecture.
    I am running 10.5.8  after I have download the dm the window that I should put it into the applications had like a do not enter symbol.
    Thank you for your help

    Your Mac is too old to run it.
    http://www.skype.com/en/download-skype/skype-for-mac/
    Click the system requirements on that page & you will see…
    1GHz Intel processor.
    Mac OS X 10.5.8+.
    100 MB free disk space.
    Either USB or regular headset if your Mac does not have a built-in microphone.
    Download drivers if you are using an external webcam.
    For voice calls recommend broadband connection with 100 kbps down / 100 kbps up.
    For group video calling everyone on the call needs Skype 5.0 for Windows or Mac or higher plus webcams. For best quality we recommend you use a high-speed broadband connection of 4Mbps down/512kbps up and a computer with a Core 2 Duo 1.8 GHz processor. As a minimum you’ll need a high-speed broad connection of 512kbps down/128kbps up and a computer with a 1 GHz processor.
    Your Mac has a Power PC processor not an Intel CPU.
    See Skype's FAQ for more info…
    https://support.skype.com/en/faq/FA34492/is-skype-for-mac-being-discontinued-on- mac-os-x-10-4-tiger-and-below-as-well-as-on-mac-devices-running-on-powerpc-archi tecture

  • I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?

    Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
    Since you're new to iPad ...
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Why my numeric key pad on my wired keyboard wont work with snow leopard?

    Why my numeric key pad on my wired apple keyboard wont work with snow leopard?
    Thanks - Farshad

    What do you know, I figured out.
    Go to System Preference > Universal Acces> Mouse > check the "Press the option key five times to turn mouse keys on or off.
    Thanks

  • Fire wire isight wont work with leopard

    I have a g4 power book and since i updated to Leopard my isight camera wont work with ichat or any other application, it wont recognize the camera. Does this mean its incompatible? How can i fix the issue?

    Welcome to Apple Discussions, gavz
    It is compatible.
    Try the suggestions in How to test your (external) iSight to ensure it is functional.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Built in mic wont work with desktop version of skype

    So i had skype already on the computer when i got it sense it had windows 8 well it just started to show that the skype i was using was going out of date so i decided to follow the link to download the desktop version now it wont work with my mic not sure if it a issue with microsoft end or skypes end. anyone got any ideas how to fix this problem?

    Fault Module Name: iTunes.dll
    That one often indicates a user-account-specific issue on the PC.
    In the course of your troubleshooting to date, have you checked through the user-specific troubleshooting section of the following document?
    [iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717]

  • Could not load the Multiprocessor Support module because it wont work with

    Here is a strange error message, there are actually 2.
    But they arent making PSE 8 unusable, just very annoying.
    Here is the first one,,,,,,,,,
    "Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
    When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
    My new Mac has 2 processors? Could that be what the message is saying?
    But when I click the error message away, PSE 8 works fine.
    There is another one too,
    "Could not load the FastCore Routines module because it doest not work with this version of photoshop."
    I just click it away and no problem, just a pita.
    So if they dont effect it, I shouldnt worry, but my classmates are concerned.
    Do you here have any idea what it is, and how to get rid of it?
    There is info on the web about it, but no solutions.
    Thank you,
    Jane

    This is interessting, as does my new Mac have 2 processors or 2 cores?  I havent come across how this works yet, nor how to find it on my Mac.
    Yes, I just found a site which explains it well,
    http://macperformanceguide.com/Optimizing-Cores.html
    I have one processor with 2 cores.
    And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
    You sure explained this well!   I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
    http://kb2.adobe.com/cps/407/kb407809.html
    Is what Adobe tells us, this is for Windows, but it could apply to Macs?
    I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before.  Thats confusing, as I would have thought it would have shown up right from the start.
    I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
    This will be fun to see what the real answer is!  As I find out more, I will add it here.
    Thank you,
    Jane

  • HT1338 My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?

    My hp photo smart printer 5514 wont work with my 10.8 software, how do I fix this ?

    It's supported. Open System Preferences > Print and Scan, press + button and press your printer

  • Why apple charger wont work with some ipods?

    why apple charger wont work with some ipods?

    I can charge my 5th generation Nano either with the Apple USB cable connected to my Mac or when it is plugged to the wall outlet.  Not suprisingly, it recahrges much faster when plugged into the electric outlet.
    Which Nano do you have?

  • Refresh rate set wrong, mini wont work with TV anymore

    I have a Mac mini hooked to my conventional TV. I tried setting the refresh rate to 58Hz. I wanted to see if it made the picture any better. The image lost all vertical sync and the image rolls very fast. I thought maybe a confirm dialog box would switch it back to 60Hz after a set time. It didn't
    I tried putting it to sleep an waking it. I pulled the plug and restarted it. I reset the PRAM. The mini always switches to the bad refresh rate after start up.
    I hooked the mini up to my 23" Cinema Display. Then I can use it fine. However, there was no way to channge the TV settings. I hooked it back up to the TV and it still wouldn't work.
    So now I have a mac mini that wont work with a TV. The only thing I want to use it with. The only thing I can think is a last resort. To erase the hard drive and re install Mac OSX from scratch.
    Is there anything I can do short of reformating the thing? There really should be a timed out dialog box to confirm the setting, al la (dare I say) Windows XP.

    This is a real Catch-22 that has caught a bunch of us. If Apple wants lots of naive users to hook these up to their TVs as media centers, they need to have the kind of recovery mechanism you suggest. In the meantime, when I had the same problem and posted, there were lots of useful suggestions in this thread:
    http://discussions.apple.com/message.jspa?messageID=1913178#1913178

  • Please give me a idea with sample code explainingBDC  with TAB control

    Hello,
    Can anybody give me a idea of doing BDC with TAB control.
    Regards
    Mave

    hi, you need to show the BDC script in TAB control?
    then you can reference to the screen of SHDB, maybe
    thanks

Maybe you are looking for

  • How do I maintain control of my form?

    This is a bit "wordy", but here is the scoop. I'm using Microsoft Visual Studio for VC++ in Windows 2000. I made an application which had no form in it. So when I ran the application, I just got a DOS box that showed some progress info. I then decide

  • How can i tell when a device was installed on my iphone

    I didn't install a type of bluetooth device on my phone, and I am trying to see when it was installed.  Any thoughts?

  • Adobe Reader 9 won't read pdf documents

    I have Reader 9. It will convert a word .doc to .pdf. But I can't open the pdf file. I have Window (Default) selected for text encoding. Immediately after converting (printing) I get a PDF file, perfect condition. But after I "save" I can't reopen. T

  • Trying to sync itunes U and podcasts to ipad 1.

    When syncing, only some of the iTunes U and podcasts synch to my iPad. I cannot figure out why some move to the iPad and some do not. Does anyone have any ideas?

  • Why is iPhoto doing this none stop?

    My iPhoto does this none stop. I've restarted. I've restarted the computer, deleted the plist file and it still does it none stop no matter how long I leave it open. Is there a quick fix.  It started this after I created another library.