Dynamic File name for File receiver adapter

Hello,
I am doing Proxy sender to File receiver scenario.
Filename is generated in SAP R/3 program and I want to create the file with this same name
on target location.
please suggest me how to use this file name in Receiver file adapter?.
Thanks & Regards
Jagesh

Hi,
you have to enable the adapter specific parameter --> file name in both the sender and the receiver CC to get the input file name as output file name.
Refer this blog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also you need to use this udf
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also refer this blog:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
Nithiyanandam

Similar Messages

Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?

Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews. We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension). The Modified information is Unknown, as is the Size and Compressed Size.
When the review file is then re-opened, even the initiator cannot open the file, although:
The file location is marked with the paperclip within the document.
The file name is shown in the Comments List with the initiator's name.
In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
The file Name cannot be edited, although the file Description can be.
We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation. Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform. Can someone please give us some advice how to get this feature to work as described?

FYI Rave,
There are some other forum entries with this exact same issue...:
Cannot Open Attachments in PDF
Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?

File name in the Receiver Adapter

Hi,
I need to create a file with the name as ZZZCCYYMMDDHHMMSS.txt
where ZZZ is the constant
CCYYMM is the date of file creation
DDHHMMSS is the time of file creation.
There MUST NOT be any spaces in the file name
Eg ZZZ20110314152530.txt
I am using the Receiver File Adapter with Cntent Conversion. I tried using Add Time stamp option. But that does not sattisfy the required Naming conventions for file name.
Any help would be appreciated.
Regards
Harry

Hi Harish,
Your requirement is to generate a dynamic file name @ target side right??
If so best option is go for UDF. (I hope you heard about UDF already)
There is something called ASMA... (check it out)
Have a look @ following. So that you can get some Idea about ASMA
In Google Type : dynamic file name in Pi
Select 1st link- sap technical
After this try to write own UDF to get desired file name @ target side..
Thanks,
Saravanan

File name in FCC receiver adapter

How to do this ?
The filename will have the following format:
AAAAAA_BBBB_CCCCCCCC_DDDDDD
Where: AAAAAA First 6 digits of first field
BBBB 4 digit Company Code second field
CCCCCCCC Current system date in YYYYMMDD format
DDDDDD Current system time in HHMMSS format.

If you go with Variable substitution, certain things are not possible such as "AAAAAA First 6 digits of first field".
However below wiki covers all the possibilities.. please check..
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Dynamic File name in File Adapter

Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
Saiju

Hi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM

Dynamic UserID/Password for file Adapter

Hi,
How to use dynamic UserId/Password for file adapter ?
(Sender/Receiver)
In our case the Id/Pwd of FTP Site changes freguently.
Can anyone help.
Thanks in Advance
Regards
Chemmanz

Hi Chemmanz,
>>>>In our case the Id/Pwd of FTP Site changes freguently.
but do you have those passwords in the message payload?
if not then you will still have to fill it somewhere right?
BTW
the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
but this is not possible in standard I believe
Regards,
michal

Dynamic file names on file based processing

Hi Experts
we are doing file to file scenario using file based processing not on message based ( No Reposiitory Objects - No mapping , no interface objects ).
we need to pickup the file name from the source directory and place it in the target directory with the same file names.
the source file name is added with the time stamp and client number,
Since there no mapping , we can't use the dynamic file concepts.
Please help me with the possible solutions
thnz for the help in advance.
Cheers
Faheem

Hi Faheem,
You will be using the dynamic config when u want to map the input file name to a field in the target message.
As per ur requirement ASMA will do :
try this:
In both the sender and receiver file adapters , select Adapter Specific Identifiers and File Name
In the receiver file adapter give some dummy value for file name and directory.
In the runtime, the source file name and directory will be used as the target file name and directory.
You need not use any UDF or a mapping here
Hope it helps!!!!!!!!

How to create Same file names for source and target.

hi
Can any body send Procedure for below requirement.
how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
Please help me.
Thanks

Hi,
See the below link
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
Regards
Chilla

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How can I convert my specific file content in the Receiver Adapter(XI 7.0)?

Hi all,
I have a document structure as below:
<MT_MATERIAL>
   <MATERIAL>
         <WERKS>1000</WERKS>
         <MATNR>HAD_00001</MATNR>
         <MAKTX>CHEMICAL MATERIAL</MAKTX>
   </MATERIAL>
</MT_MATERIAL>
This document structure is the file content in the Receiver Adapter (File Adapter). In the 'Content Conversion' tab of File Adapter of Communication Channel 'CC_OUT_MATERIAL_FILE', I have configured the parameters as below:
Recordset Structure: MATERIAL
MT_MATERIAL.fieldSeparator: '
MT_MATERIAL.endSeparator: 'nl'
MATERIAL.fieldSeparator: '
MATERIAL.endSeparator: 'nl'
*.fieldSeparator: ,
But, this Communication Channel 'CC_OUT_MATERIAL_FILE' (in the Runtime WorkBench/Component Monitoring/Adapter Engine/Communication Channel Monitoring) is error with the error message as below:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Could anyone please help me to correct this error, how should i configure the parameters in the 'Content Conversion' tab?
Thanks a lot in advance,
Vinh Vo

Hi Vinho,
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
Have a look at the this blog by Arpit Seth ... its all about FCC at receiver side...
File Receiver with Content Conversion
Also have a look at this thread.. might be helps you....
RECEIVER file CONTENT CONVERSION
Above links be helpful.
Regards,
Jayasimha Jangam

Assign Logical file name for the physical file path through Program

Hi all,
I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
Now I need to assign a logical file name for the physical file path through the program.
Is there any FM or any other method to assign the same.
Gaurav

I think it is not possible. becuase the date & time added at runtime. so if you check the table PATH you can find filename and their definitions
a®

I just found an error in the file name for my Camera Raw Cache file. How do I correct it?

I just found an error in the file name for my camera raw cache file. The error is in my username. I don't know how to correct the error or if I should just leave it. I'm not sure where my cache file is stored on my computer. Any help would be appreciated.
Thank you

Since you are on a Mac if when you first set up your account you left out the i in Wilson nothing you do will change that. The REAL account name will always be alicewlson. Once an account is created you can't actually change the name of it. You can change the name that is displayed but not the REAL account name.
Simplest thing to do is stop worrying about it. Everything is as it should be, that is except Wilson being spelled without the i.
Lilac50 wrote:
When I searched finder for "alicewlson" I found a long list of files like this:
2014-07-22 12.50/File005.nef[15:16:35.212] (debug) src/ImageLoader.cpp:363: File: /Users/alicewlson/Recovered/2014-07-22 12.50/File002.nef[15:18:02.173] (debug) src/StoreXMLFile.cpp:21: /Users/alicewlson//.rpro/rpro.cfg
I believe I made the error in my user name when I first got my computer a year ago. I then corrected it under my user name but not in my Lightroom files. I also looked for files with a .lrdata extension and didn't find any.

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

Export Indd to EPS/JPG and set the file name for EPS/JPG file

Hi,
When I export the INDD to JPG/EPS, I want to set the file name with pageNumber for JPG/EPS files using javascript.
For Example
If I set the file name as EPSFile.eps, after exporting the indd(with 2 pages) to eps
,files are generating in the following name EPSFile_1.eps, EPSFile_2.eps.
but I want to set the file name as EPSFile_001.eps and EPSFile_002.eps using javascript.
anyone knows please reply for this.
Regards,
Mubeen

Hi,
I tried the following code.
var JPGe = new File("Applications/PDF/JPG/file.jp");
app.activeDocument.exportFile(ExportFormat.jpg, );
when I use this code ,exported jpg file names are
file.jpg, file1.jpg,file3.jpg.
but ,I want the output file names as file_001,file_002,file_003,
Thanks,
Mubeen

Dynamic File name for File receiver adapter

Similar Messages

Maybe you are looking for