Dynamic read of file for File Port

As per our project requirement have to use File Port to pick a set of IDOC Flat files from a given directory. The File Port only allows us to pick a file with a specific given name and does not allow us to pull file with a pattern for .eg. We can pull a file abcd.txt but cannot pull something like abc.txt. Our requirement is to pull abc.txt using the File Port.
If anyone has any idea about this, or any past experience with File Port in this regard, then please respond at the earliest.
We have created the file port with follwoing parameters:
Unchecked the Unicode Format System Setting
For the Inbound File:
Function Module: EDI_PATH_CREATE_CLIENT_DOCNUM
Directory is: A valid directory path
File Name: abcd.txt

Hi,
According to me, while using the automatic syndication through ports, it is not possible to change the filename that IDOC flat file generates.
FTPS != Secure FTP (990)
FTPS should have SSH Port 22.
u can check on this:
Basic FTP Setup Instructions
refer this thread also
FTPS
Thanks & Regards!!!
Saurabh Goel

Similar Messages

Dynamically reading & writing in a file

Hi all,
i want to find a particular string from a weblogic server log [*.log] file and write into a separate txt [output.txt] file.
important : The weblogic server log file is dynamic one.
The log contains somestring and xml files, those string are writen by logger tool. only i want to retrieve logger tool msgs.
for eg.
####<Sep 21, 2006 10:04:39 AM GMT+05:30> <Debug> <CLA_JMS> <dscp06614> <cgServer> <ExecuteThread: '22' for queue: 'weblogic.kernel.Default'>
<ServiceHeader>
<HI_PCK_SYS>ORM</HI_PCK_SYS>
<HI_PCK_USR>ALC</HI_PCK_USR> <HI_WORKSTRING_ORIGINATOR>SVI</HI_WORKSTRING_ORIGINATOR>
<HI_WORKSTRING_MSG_ID>hostname-99ba23.10dcea555e2.-7ff8</HI_WORKSTRING_MSG_ID>
</ServiceHeader>
####<Sep 21, 2006 10:04:39 AM GMT+05:30> <Debug> <CLA_JMS> <dscp06614> <cgServer> <ExecuteThread: '22' for queue: 'weblogic.kernel.Default'> <<anonymous>> <BEA1-02E4CB44E4DA812720BD> <000000>
<con:OrderID>1033987</con:OrderID>
<StateCode>SUCCESS</StateCode>
from the above content i want to fetch following elements & write into a
separate file as output.txt
output.txt
USER Order_ID SYS ORIGINATOR MSG_ID statecode
ALC 1033987 ORM SVI 111 success
ALC 1033989 ORM SVI 112 failure
Anyone have idea how to get the string from the dynamic log file.
we can achieve for static file by using :
BufferedReader inputStream = new BufferedReader(new FileReader("cgServer.log"));
PrintWriter outputStream = new PrintWriter(new FileWriter("log_output.txt"));
But how do read the data from a dynamic file and put into static file.
your suggestions are most welcome.
Message was edited by: Paulraj_mm
PaulrajDaniel

Hi there, I am currently wanting to do the same thing. I would like to know what you ended up doing. Our log files get quite large (we log 8gigs a day), and the weblogic log files are 512MB each. Would scripting be better than java for this task? Our log files also run on multiple mservers on multiple servers, so searching for XML messages is on multiple servers, on multiple mservers is quite a daunting task to do manually!
Thanks

Read timed out, for file checkin using SCS API

Hi,
I have installed content server and deployed CIS in standalone oc4j.
I want to checkin files using the SCS API. Initially I was to able checkin a file of size 120MB successfully. When I tried to checkin a file of size 300MB , file is checked in but an Exception with the msg "Read timeout out" is thrown.
I am able to checkin the same file(300MB) through content server front end without any error.Why do I get exception when using the API?
[2008-01-11 09:56:07,343] [main] WARN (com.stellent.cis.server.api.scs.protocol.impl.HDAProtocol) - Unable to find end header mark! ()
[2008-01-11 09:56:07,343] [main] WARN (com.stellent.cis.server.api.scs.protocol.impl.HDAProtocol) - Did not read any headers from input, setting type to UNKNOWN_TYPE
com.stellent.cis.client.command.CommandException: com.stellent.cis.server.api.scs.request.SCSRequestException: Error reading the response from the Content Server: Read timed out
     at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:338)
     at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:222)
     at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)
     at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
     at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
     at com.stellent.cis.client.api.scs.document.checkin.impl.SCSDocumentCheckinAPI.checkinFileStream(SCSDocumentCheckinAPI.java:707)
     at test.CheckinFile.execute(CheckinFile.java:85)
     at test.CheckinFile.main(CheckinFile.java:60)
Caused by: com.stellent.cis.server.api.scs.request.SCSRequestException: Error reading the response from the Content Server: Read timed out
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.parseResponse(SCSRequestProcessor.java:223)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.processRequest(SCSRequestProcessor.java:114)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:61)
     at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedPublishFilter.handleRequest(SCSOptimizedPublishFilter.java:128)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
     at com.stellent.cis.server.api.scs.request.stream.SCSOptimizedRetrieveFilter.handleRequest(SCSOptimizedRetrieveFilter.java:250)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
     at com.stellent.cis.server.api.scs.request.rewrite.SCSRewriteURLFilter.handleRequest(SCSRewriteURLFilter.java:140)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
     at com.stellent.cis.server.api.scs.request.cache.impl.SCSServiceCacheFilter.handleRequest(SCSServiceCacheFilter.java:104)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestFilterChain.doRequestFilter(SCSRequestFilterChain.java:58)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestExecutorProxy.execute(SCSRequestExecutorProxy.java:105)
     at com.stellent.cis.server.api.scs.impl.SCSCommand.executeViaProxy(SCSCommand.java:353)
     at com.stellent.cis.server.api.scs.impl.SCSCommand.executeRequest(SCSCommand.java:335)
     ... 7 more
Caused by: java.net.SocketTimeoutException: Read timed out
     at java.net.SocketInputStream.socketRead0(Native Method)
     at java.net.SocketInputStream.read(SocketInputStream.java:129)
     at java.io.BufferedInputStream.read1(BufferedInputStream.java:254)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
     at com.stellent.cis.server.api.scs.protocol.impl.HDAProtocol$1.read(HDAProtocol.java:379)
     at java.io.FilterInputStream.read(FilterInputStream.java:90)
     at com.stellent.cis.server.api.scs.protocol.impl.BaseHDAProtocol.determineFormat(BaseHDAProtocol.java:150)
     at com.stellent.cis.server.api.scs.protocol.impl.HDAProtocol.readMessage(HDAProtocol.java:308)
     at com.stellent.cis.server.api.scs.request.impl.SCSRequestProcessor.parseResponse(SCSRequestProcessor.java:206)
     ... 20 more
Regards
Raji

I would probably guess that CIS is configuring its socket threads to have particular timeouts (to limit the time you would wait if something seriously went wrong with the request). Typically CIS is focused on page generation in APP servers or portals and these app servers (or portals) tend to like timeouts on their requests. This of course is unsuitable for the scenario of uploading the file. I would consult the CIS documentation to see if there are any mechanisms for tuning this behavior. If not, try contacting support.

Dynamically define target address for logical ports (NW'04)

Hello,
when developing a web-service client using standalone proxy, you have to define the target address of a Web Service in the property-page for the Logical Port.
We have the following problem. If, for any reason, the URL of the Web Service changes (i.e. the hostname or the port), we have to rebuild the whole project and then redeploy the project.
Is there a way to change this URL dynamically by java-code?
Thanks in advance,
Jarle

Hi,
You can get Server name Dynamically. You follow the below steps.
1. Create a HTTP Destination in visual administrator which stores the server name and port.
2. Access this variable in your controller init method and build your web service url with server name and port and use _setEndPoint() method
String prefixURL = "http://";
// your Service Address...remove the first part from service url.
String serviceURL = "/TestService/Config1?style=document";
DestinationService dstService = (DestinationService) obj;
Destination destination = dstService.getDestination("HTTP","ApplicationServer");
Properties destprop = destination.getDestinationProperties();
HTTPDestination httpDestination = (HTTPDestination) destination;
String serverName = httpDestination.getUrl();
prefixURL = prefixURL + serverName;
String testURL = prefixURL + serviceURL;
Request<Obj> testReq = new Request<Obj>();
testReq._setEndPoint(testURL);
You need to import below files into your project.
import com.sap.security.core.server.destinations.api.Destination;
import com.sap.security.core.server.destinations.api.DestinationService;
import com.sap.security.core.server.destinations.api.HTTPDestination;
import java.net.HttpURLConnection;
import java.util.Properties
hope it solved your problem.
Regards,
Sridhar

Rename output file for File Transport

I am using ALSB 2.6.When I created file transport for detect file in C:/filein directory.I found that the name of output file didn't same as input file,example input-file = IgniteRB output-file = 6815685856805434446-1b555112.11a526f862f.-7fb0
Please help me identify this problem? Thank you :)
Edited by poommy105 at 06/04/2008 7:38 PM

If you only need to change the name, then in your publish sub-actions, use the "Set Transport Headers" action. You should be able to check "Pass all Headers through Pipeline" and skip selecting the specific header.
Or in the list for headers there is one for fileName.
You can derive it from the source name using the $inbound variable, or select "copy from inbound".
If you need to change the path (instead of business service value) then you can use URI setting in "Routing Options" action.

Multiple Selection of files for File Upload

HI,
Can we upload Multiple files at a time using File Upload option?
Regards,
Raju

hi
Check this link it might give hint, same you can try in wd java.
http://www.roseindia.net/jsp/file_upload/uploadingMultipleFiles.shtml
As in above code separate file up-loader is used for each file.
I know you might be looking;like lotus or outlook copy all attachment is such a way.
Edited by: Yogesh Galphade on Mar 22, 2011 7:51 PM

How to create two headers line in CSV file for File Receiver Adpater ?

Hi friends ,
 My scenario is RFC to File. I am downloading file in CSV format . May I know how do i add two line of staic headers Like follows
 CLOCTYP CFLOCTYP
Exe Loc. Type Cus Loc. Type
Best Regards.,
V.Rangarajan

My Input xml will be like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FileRec_MT xmlns:ns0="urn:tabFile">
 <ContactFile>
 <Contact>
 <Name>Raghavendra</Name>
 <LName>GURU</LName>
 <Company>xxx</Company>
 </Contact>
 </ContactFile>
</ns0:FileRec_MT>
Output in csv as
Raghavendra, Guru ,xxx
My requirement is [ 2 header Lines ]
CLOCTYP CFLOCTYP CFPLACE
Exe Loc.Type Cus Loc. Type Place
Raghavendra Guru xxx
 If multiple rows comes it has to come like
 CLOCTYP CFLOCTYP CFPLACE
 Exe Loc. Type Cus Loc. Type Place
 Raghavendra Guru xxx
 test test yyyyy

How to get file name in faultpolices file for file based rejection handler

Hi All,
I am implementing the file rejection handler in fault polices.xml
Now i want to catch exact file name and use this in faultpolices.xml under Filename tag and move the rejected file to custom directory.
Can some please let me know is it possible to catch the exact filename and use the same name in rejection handle.
Suppose If we don't handle the rejection handler then these files will move to the default path in SOA HOME. But the file name remains the same. So i think this can be changed in SOA, but i am afraid i how can i do it.
Please suggest me.
Regards,
Tarak.

Hi,
have a look at my new weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
to see how you can access filename
Regards,
michal

Changing source file for file sender adapter in adapter module

Hi guys!
3rd party partner send us files, which are not acceptable by file adapter, so we need to implement (I suppose) adapter module in file sender adapter to correct the file format before it is taken by standard adapter. I have no experience in this development field. Could you give me:
1, whether it is possible (changing file contents before it is taken by standard file sender adapter)
2. any ideas, where to start with the development (pdf with info etc.)
Thanx a lot!
Olian

2. any ideas, where to start with the development (pdf with info etc.)
>>>>>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81
1, whether it is possible (changing file contents before it is taken by standard file sender adapter)
>>
yes you can achieve this in the logic in a module

Reading and Writing For Serial Port (RS232)

Hi there;
I want to send data from my comport to a device and take data from there. I use Windows operating system. I looked at a bit javax.comm and RxTx.
Firstly do i have to use RxTx for my project because of i am using Windows operating system?And;
Where should i began to start simply send and receive data via RS232?
Edited by: furkankamaci on Feb 14, 2009 8:05 AM

Use RxTx and follow its examples.

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

Is there any component in JSF for file browsing

Hi Friends,
i have to place a file browser in my page,i am using JSF Framework. so i need file browser component in JSF , but i am not able to find the JSF Component for file browser.( in normal html there is this tag {<input type="file" /> } for file browsing ), is there tag for file browsing in JSF.

Edukondalu_Avula wrote:
can you tell me what is the jar file i have to add for this taglib
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t" %>
Read reply #3. I have posted a link.

BizTalk 2013 SFTP Adapter Dynamic SFTP send port exception: Open remote file for write error

I am using BizTalk 2013 SFTP adapter. I defined a Dynamic One-Way
send port on BizTalk server administration.
Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Server stack trace:
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.OpenRemoteFileWrite(String fileName, Int32 fileOffset)
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpFileWriterStream.Write(Byte[] buffer, Int32 offset, Int32 count)
   at Microsoft.BizTalk.Adapter.Sftp.SftpOutputChannel.Send(Message message, TimeSpan timeOut)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
   at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
   at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
Exception rethrown at [1]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at System.ServiceModel.Channels.IOutputChannel.EndSend(IAsyncResult result)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendCallback(IAsyncResult result)
MessageId: {926F44F2-9180-4B33-96FF-9E4CBC459382}
InstanceID: {36A50A7F-63C4-48D9-903D-A33C85DDAE36}
Can you please assist with explaining why are we getting this exception?
Thank you for your help.

Below is the error I'm getting on BizTalk while trying to write files to a designated folder on a client's SFTP server.
When defining the same path and properties on a Static One-Way send port everything works properly and the files are being saved on the SFTP server.
A message sent to adapter "SFTP" on send port "ComverseSFTP_1.0.0.0_ComverseSFTP.SendFileToSFTP_SendFileToSFTPServer_f6b86b86a22079f8" with URI "SFTP://abc.xyz.com:22/upload/%SourceFileName%"
is suspended.
Error details: Microsoft.BizTalk.Adapter.SftpInvoker.SftpException: Open remote file for write error.
Hi Yaeli1,
From the error message above, please check the permission for file writing , it seems that this issue is related to access permission.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Dynamic update to Inbound Directory for File Adapter Read

I've seen references to others asking similar questions but never a good answer.
I have a process that outputs files into daily dated directories. In other words, my Inbound Direct name is dynamic. I would like BPEL to be able to pick up these files but the Directory Spec for the inbound file adapter seems to be set at design time (or in the case of a Logical Directory Deployment time).
The directory names are in YYYMMDD format. So it would be:
importdir/YYYMMDD
for each day.
Is there a way I can monitor an entire subtree, or have some event that triggers the directory name to be updated (for instance, a process watches the parent directory and kicks off when a new directory is created), or any other method I can inform the FileAdapter to begin polling a different directory.
Thanks.

Hi,
Look at this document : [Oracle JCA Adapter for Files/FTP|http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10231/adptr_file.htm#CIAFJCCE]
Romain.

Dynamic read of file for File Port

Similar Messages

Maybe you are looking for