Dynamic RFC error

Hi
When I am trying to run my Webdynpro application I am getting a Dynamic RFC error. Can anyone help me to resolve this error.
Thanks
Lakshmi

Hi
Thanks for immediate response.
I have checked in the transaction ST22 and I could see several dumps on my user id for the function module which I am using.
what does it mean? what i need to do in this case?
Thanks
Lakshmi

Similar Messages

RFC error when trying to add transport request in queue in STMS..

Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.

Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers

RFC ERROR while running BI Process Chain

I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
Thanks

This looks like a BW problem. Do you get the same message when you submit it manually in SAP?

RFC error while publishing dialog transaction

Dear All,
I had made an internet service in a dialog pool.But while publishing it i am getting RFC errors.Can you tell me what are the prerequisites for designing an internet servise as i want my module pool page to be displayed through internet browser.
Pratighya Jain

Hi Pratighya,
you got RFC-errors during the publishing of an internet service?
I assume you are talking about the integrated ITS.
Ok, that is what will happen if you publish an internet service:
the templates are copied to the the table containing the published ones
the MIME object are activated in order to be loadable by the icman - the
Web server part of the WebAS
The template caches on each application server of the system are invalidated.
For doing the last part we need RFC connections between the application servers,
since the order to refresh the cache is send using a function module via RFC. Is
the system configuration clean? Are all of the servers reachable by RFC?
You may check the state of the template caches using the transaction SITSPMON.
hope this helps
Tobias

Rfc error while importing TR

Hi All,
i have setup CHARM created a TR and task and assigned a correction to thes task, released the task and TR and while trying to import the the trequest to quality system (from solutionmanager) throwing an error"TMS Communication Error with [email protected]". opened the performance assisant of this error which displays "User SAPSYS has no RFC authorization for function
group TMSC "
rgds,
Anand

Dear Anand,
Please go to Tcode:SM59,select the [email protected] rfc under ABAP Connections and check for the connection test.
In the Log on tab(when you double click [email protected])check for the user which is mentioned there.
If you get same RFC error when you do the connection test,the proper RFC authorization should be given to the user mentione in the log on tab in the satellite system.
Revert for any clarifications,
Thanks and Regards,
Avinash.

RFC error in idoc to file scenario in PI 7.0

Hi Experts,
I am getting a RFC error message like this below
:u201D RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: JCO.Exception while calling Z_XI_SEND_MAIL in remote system (RfcClient[RFC_REJECTION_MAIL]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: An exception occurred that was not caught.u201D
Here Z_XI_SEND_MAIL is a customised function module which is calling some classes. This function module is responsible for sending emails to a group of people. This function module is working fine in acceptance server and development server but throwing exception in production. Thus the users are unable to receive emails. There has been no code changes in the function module. Idocs are being triggrred from sap r/3 system into XI, then being processed by a BPM, finally RFC (Z_XI_SEND_MAIL ) is being called to send email messages. SXMB_MONI is showing that the email message is being send to the RFC properly but communication channel is showing the above mentioned error.
Please suggest me what might be the reason of such errors?
Regards
Anupam

Hello,
Have you tested the production data in your acceptance system or development system for the interface?
Is it working fine??
It seems that the function module is generating exception, which could be due to data.
-Rahul

RFC ERROR IN WEB DYNPRO

Hi
I m Doing Web Dynpro Program For DMS Project There Is Some Problem Occuring In Default Function Module ARCHIVOBJECT_CREATE_FILE
And The Error Msg Is : Cannot Call RFC Program And No Return Possi
By
Srinivasan.R

Hi,
Please check if its Remote Enabled. The FM ARCHIVOBJECT_CREATE_FILE is a normal function module and not remote enabled.
As you have said, RFC error, I assume you are trying to call the FM from a different system specifying the DESTINATION
option.
Regards,
Sagar

RFC ERROR       timeout during allocate

Hi all,
We are trying to connect our ECC 6.0 system to ECC 5.0 system thru RFC we get the following error. Both the systems are available running
Timeout during connection setup. Please check partner availability
[abrfcio.c    8139]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2799
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =RQ3CLNT300
HOST =168.189.35.139
SERV =sapdp11
GWHOST =dcecqv1
GWSERV =sapgw02
[abrfcio.c    8139]
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed May 14 05:41:59 2008
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host dcecqv1 / sapgw02
M * ERROR       timeout during allocate
M *
M * TIME        Wed May 14 05:41:59 2008
M * RELEASE     700
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          242
M * MODULE      gwr3cpic.c
M * LINE        1872
M * DETAIL      no connect of TP sapdp11 from host cpchrpq1.clorox.com after
M *              20 sec
M * COUNTER     1679
M *
M *****************************************************************************
M
A RFC 2318 CONVID 77332474
A   * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 300)
A RFC> Destination: RQ3 (handle: 2, , {482AC1FF-A0EE-2871-E100-0000A8BD2A0B})
we have mentioned the system no, hostname..every thing correctly
Any help
Thanks
Senthil

Hi Senthil,
I had faced a similar issue working with my previous company. Upgrading the kernel had done the trick. I am not sure of the SAP note but please check Note, 827872 - Work process waits for registered RFC server
Regards,
Atul Lotlikar.

RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C

Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
Vijay

Hello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#

Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.

hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno

RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed: BASIS         14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS         03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS         03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS         30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS         03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS         03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

RFC Error when using SAPRFC against a Unicode System

Hi Everybody,
I try to use the PHP SAPRFC extension against a Unicode System. When I call the client.php which comes with the source package from http://saprfc.sourceforge.net/ where I added:
               "CODEPAGE"=>"4103",                  // codepage Unicode
               "UNICODE"=>"1",                      // Unicode
to the $LOGIN array I get this error:
Warning: RFC Error Info : Group : 103 Key : RFC_ERROR_LOGON_FAILURE Message : D
in /var/www/saprfc/client.php on line 48
RFC connection failed with error:RFC Error Info : Key : C
Status : EXCEPTION SYSTEM_FAILURE RAISED Message : D Internal:
there are two trace files after the call. One called dev_rfc.trc with this content:
**** ERROR file opened at 20060605 050220 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
T:1079532480 Error in program 'apache2': ======> D
T:1079532480 Error in program 'apache2':
<* RfcReceive [1] : returns 3:RFC_SYS_EXCEPTION
and a file called rfc27443_1079532480.trc:
**** Trace file opened at 20060605 050500 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
<<< RfcOpenEx failed
>TS> Mon Jun 5 05:05:06 2006
resize I/O buffer to 16000 bytes
>>>> [7] <unknown>    : EXT <ac: 74> L sapserver.test.com >>> OPEN
UUID: ab_drvstate create uuid {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> [7] <unknown>    : EXT <ac: 75> L sapserver.test.com >>> 45573492 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
>>> RfcOpenEx ...
Got following connect_param string:
   ASHOST=sapserver.test.com SYSNR=00 CLIENT=002 USER=developer PASSWD=*******
LANG=EN CODEPAGE=4103 UNICODE=1 TRACE=1
Send RFCHEADER: 01/LIT/IEEE/SPACE/4103
Send UNICODE-RFCHEADER: cp:4103/ce:IGNORE/te:REJECT/cs:1/rc:0x00000023
UUID: send_rfcuuid {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>> Logon check: calling RFCPING
>>> RfcCall [7] ...
*> RfcCall
FUNCTION RFCPING
        handle = 7
        parameter   = <NULL>
        tables      = <NULL>
UUID: RfcCallNew send the uuid to the partner {44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> [7] <unknown>    : EXT <ac: 76> L sapserver.test.com >>> WRITE (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
000000 | D9C6C3F0 F0F0F0F0 F0F0F0E3 01010008 |................|
000010 | 01010101 04010003 01010103 00040000 |................|
000020 | 020B0103 0106000B 04010003 01000100 |................|
000030 | 00002301 06000700 0F313237 2E302E30 |..#......127.0.0|
000040 | 2E312020 20202020 00070011 00014500 |.1      ......E.|
000050 | 11001200 04363430 20001200 13000436 |.....640 ......6|
000060 | 34302000 13000800 20736172 67652D77 |40 ..... sarge-w|
000070 | 77772020 20202020 20202020 20202020 |ww              |
000080 | 20202020 20202020 20000800 0600803C |         ......<|
000090 | 756E6B6E 6F776E3E 00000000 00000000 |unknown>........|
0000a0 | 00000000 00000000 00000000 00000000 |................|
0000b0 | 00000000 00000000 00000000 00000000 |................|
0000c0 | 00000000 00000000 00000000 00000000 |................|
0000d0 | 00000000 00000000 00000000 00000000 |................|
0000e0 | 00000000 00000000 00000000 00000000 |................|
0000f0 | 00000000 00000000 00000000 00000000 |................|
000100 | 00000000 00000000 00000000 00000000 |................|
000110 | 06051400 10D59D83 44CE9D32 6BE20012 |........D..2k...|
000120 | FDBA1075 32051401 30000761 70616368 |...u2...0..apach|
000130 | 65320130 01110009 44455645 4C4F5045 |e2.0....DEVELOPE|
000140 | 52011101 17000D56 F94AFD31 E72211B4 |R......V.J.1."..|
000150 | 1DCED7F3 01170114 00033030 32011401 |..........002...|
000160 | 15000145 01150501 00010105 01050200 |...E............|
000170 | 00050200 0B000336 3430000B 01020007 |.......640......|
000180 | 52464350 494E4701 02051400 10D59D83 |RFCPING.........|
000190 | 44CE9D32 6BE20012 FDBA1075 320514FF |D..2k......u2...|
0001a0 | FF0000FF FF000000 00000000 00000000 |................|
>>>> [7] <unknown>    : EXT <ac: 77> L sapserver.test.com >>> FLUSH(WRITE) (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
<* RfcCall [7] : returns 0:RFC_OK
>>>> [7] <unknown>    : EXT <ac: 78> L sapserver.test.com >>> FLUSH(WRITE) (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
>>>> Listen/WaitForRequest (counter = 4)
>>>> [7] <unknown>    : EXT <ac: 79> L sapserver.test.com >>> LISTEN (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
000000 | 01010008 01010101 04010003 01010103 |................|
000010 | 00040000 020B0103 0106000B 04010003 |................|
000020 | 01000200 00002301 06001600 08310031 |......#......1.1|
000030 | 00300030 00001600 07001E31 0030002E |.0.0.......1.0..|
000040 | 00310032 0038002E 00330036 002E0031 |.1.2.8...3.6...1|
000050 | 00350020 00200020 00000700 11000233 |.5. . . .......3|
000060 | 00001100 12000836 00320030 00200000 |.......6.2.0. ..|
000070 | 12001300 08360032 00300020 00001300 |.....6.2.0. ....|
000080 | 08004064 00650063 00720030 0034005F |[email protected]._|
000090 | 00430052 0034005F 00300030 00200020 |.C.R.4._.0.0. . |
0000a0 | 00200020 00200020 00200020 00200020 |. . . . . . . . |
0000b0 | 00200020 00200020 00200020 00200020 |. . . . . . . . |
0000c0 | 00200000 08000601 003C756E 6B6E6F77 |. .......<unknow|
0000d0 | 6E3E0000 00000000 00000000 00000000 |n>..............|
0000e0 | 00000000 00000000 00000000 00000000 |................|
0000f0 | 00000000 00000000 00000000 00000000 |................|
000100 | 00000000 00000000 00000000 00000000 |................|
000110 | 00000000 00000000 00000000 00000000 |................|
000120 | 00000000 00000000 00000000 00000000 |................|
000130 | 00000000 00000000 00000000 00000000 |................|
000140 | 00000000 00000000 00000000 00000000 |................|
000150 | 00000000 00000000 00000000 00000000 |................|
000160 | 00000000 00000000 00000000 00000000 |................|
000170 | 00000000 00000000 00000000 00000000 |................|
000180 | 00000000 00000000 00000000 00000000 |................|
000190 | 00000000 00000000 00000000 00000000 |................|
0001a0 | 00000000 00000000 00000000 00000000 |................|
0001b0 | 00000000 00000000 00000000 00000000 |................|
0001c0 | 00000000 00000000 00000605 140010D5 |................|
0001d0 | 9D8344CE 9D326BE2 0012FDBA 10753205 |..D..2k......u2.|
0001e0 | 14050000 00050004 03002E43 0041004C |...........C.A.L|
0001f0 | 004C005F 00460055 004E0043 00540049 |.L._.F.U.N.C.T.I|
000200 | 004F004E 005F004E 004F0054 005F0046 |.O.N._.N.O.T._.F|
000210 | 004F0055 004E0044 00040304 02004046 |.O.U.N.D......@F|
000220 | 0075006E 00630074 0069006F 006E0020 |.u.n.c.t.i.o.n. |
000230 | 006D006F 00640075 006C0065 00200022 |.m.o.d.u.l.e. ."|
000240 | 00524643 50494E22 0020006E 006F0074 |.RFCPIN". .n.o.t|
000250 | 00200066 006F0075 006E0064 002E0004 |. .f.o.u.n.d....|
000260 | 02FFFF00 00FFFF00 00000000 00000000 |................|
<* RfcListen [7] : returns 0:RFC_OK
>>> RfcReceive [7] ...
Received RFCHEADER [7]: 01/LIT/IEEE/SPACE/4103
Received UNICODE-RFCHEADER [7]: cp:4103/ce:IGNORE/te:REJECT/cs:2/rc:0x00000023
UUID: ab_rfccheck_uuid compare uuid's {44839DD5-9DCE-6B32-E200-12FDBA107532}
Error in program 'apache2': ======> F
>>>> [7] <unknown>    : EXT <ac: 80> L sapserver.test.com >>> CLOSE abrfcrcv_mt.c 429 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
*> RfcReceive
        handle = 7
        parameter   = <NULL>
        tables      = <NULL>
         Data conversion On
Error in program 'apache2': <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
>>>> [7] <unknown>    : EXT <ac: 81> L sapserver.test.com >>> FREE abrfcio_mt.c 3517 (45573492)
-{44839DD5-9DCE-6B32-E200-12FDBA107532}
**** Trace file opened at 20060605 050506 CEST, SAP-REL 640,0,119 RFC-VER 3 818129 MT-SL
<<< RfcOpenEx failed
Our SAP Environment is:
- SAP Web AS 6.20 Unicode Kernel Patchlevel 1602
- Windows 2003 Server
- Oracle
On the PHP Side I use:
- Debian GNU/Linux 3.1 (Sarge)
- Apache 2 2.0.54-5
- PHP4 4.3.10-16
- SAPRFC 1.4.1
- SAP RFC SDK non Unicode 6.20 and 6.40 (The problem occurs in both versions)
Had anyone had sucess using SAPRFC against a Unicode System?
Regards
Gregor

Hi Anton,
I've just tried your suggestion. I've commented out the CODEPAGE and UNICODE values in my Array and placed:
[code]saprfc_set_code_page($rfc, "4103");[/code]
after the
[code]$rfc = saprfc_open ($LOGIN);[/code]
The error message I get now is:
[code]Warning: RFC Error Info : Key : Status : EXCEPTION FU_NOT_FOUND RAISED Message :
Internal: in /var/www/saprfc/client.php on line 58
Discovering interface of function module RFC_READ_REPORT failed[/code]
In the trace File I see:
[code]>>>> [3] <unknown>    : EXT <ac: 40> L sapserver.test.com >>> WRITE (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
000000 | 05020000 0502000B 00063600 34003000 |..........6.4.0.|
000010 | 000B0102 00385200 46004300 5F004700 |.....8R.F.C._.G.|
000020 | 45005400 5F004600 55004E00 43005400 |E.T._.F.U.N.C.T.|
000030 | 49004F00 4E005F00 49004E00 54004500 |I.O.N._.I.N.T.E.|
000040 | 52004600 41004300 45005F00 50000102 |R.F.A.C.E._.P...|
000050 | 05140010 3E9E8344 3B9E306B E2000534 |....>..D;.0k...4|
000060 | B0CD3057 05140201 00104600 55004E00 |..0W......F.U.N.|
000070 | 43004E00 41004D00 45000201 0203001E |C.N.A.M.E.......|
000080 | 5246435F 52454144 5F524550 4F525420 |RFC_READ_REPORT |
000090 | 20202020 20202020 20202020 20200203 |              ..|
0000a0 | 03010010 50004100 52004100 4D005300 |....P.A.R.A.M.S.|
0000b0 | 5F005000 03010330 00040000 00010330 |_.P....0.......0|
0000c0 | 03020008 000000D8 00000000 0302FFFF |................|
0000d0 | 0000FFFF 00000000 00000000 00000000 |................|
>>>> [3] <unknown>    : EXT <ac: 41> L sapserver.test.com >>> FLUSH(WRITE) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
<* RfcCall [3] : returns 0:RFC_OK
>>> RfcReceive [3] ...
>>>> [3] <unknown>    : EXT <ac: 42> L sapserver.test.com >>> FLUSH(WRITE) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
>>>> [3] <unknown>    : EXT <ac: 43> L sapserver.test.com >>> READ (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}
000000 | 05000000 05000415 00044600 4C000415 |..........F.L...|
000010 | 04160002 45000416 04170006 30003400 |....E.......0.4.|
000020 | 36000417 04010018 46005500 5F004E00 |6.......F.U._.N.|
000030 | 4F005400 5F004600 4F005500 4E004400 |O.T._.F.O.U.N.D.|
000040 | 0401FFFF 0000FFFF 00000000 00000000 |................|
>>>> [3] <unknown>    : EXT <ac: 44> L sapserver.test.com >>> FLUSH (READ) (80999721)
-{44839E3E-9E3B-6B30-E200-0534B0CD3057}[/code]
Regards
Gregor

RFC error with SAPOSS (test connection)

Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client      :001
User        :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
                          Connection test SAPOSS
Connection type:    R/3 connection
Connection error        Error opening an RFC connection.
ERROR                  partner not reached (host 209.94.207.139, service sapdp99)
LOCATION              SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL                   NiPConnect
CALL                      connect
COMPONENT         NI (network interface)
COUNTER               9
ERROR TEXT           Network is unreachable
ERROR NUMBER    101
MODULE                 nixxi.cpp
LINE                        8628
RETURN CODE       -10
SUBRC                   0
RELEASE               640
TIME                      Wed Jul 30 10:06:05 2008
VERSION               37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
Pratyusha

Hi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR                   rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION                SAProuter 37.11 on rgcwebsrv
COMPONENT            NI (network interface)
COUNTER                 5580
MODULE
LINE
RETURN CODE          -94
SUBRC                       0
RELEASE                   640
TIME                           Wed Jul 30 10:41:28 2008
VERSION                     37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha

Inbound Queues stuck with RFC errors

Hi Experts,
Greetings for the Day !
We have BDOC related issue and we need your expert help ASAP in resolving the same.
We ahev a few BDOCS lying in intermediate state in transaction SMW01, which we found using BDOC monitoring on daily basis. When we check the same in SMQR - inbound queue, we found that the queues are stuck with an RFC error message.
We are re-activate these queues to actually resolve the intermediate bdocs. But, my query is
1> The raeson for getting these BDOCS in intermediate state & stuck queues
2> A permanent resolution for the same.
Please help and let us know if you need more details.
Regards,
Kanika

Hi Kanika,
RFC error can be due to a bad connection as well. If the server is down, there might be a problem in communication with the connected system and the queues will not be processed further. You need to reactivate or unlock to get the queues processed.
But if there are any specific errors for which the queues are stuck do state the same, so that we can look into an actual resolution.
Regards,
Venkat

Dynamic RFC error

Similar Messages

Maybe you are looking for