DYNAMIC SIMULATION MENU IN SEM BPS PLEASE ANSWER

DYNAMIC SIMULATION MENU IN SEM BPS PLEASE ANSWER
Hi everbody,
I cannot see menu "dynamic simulation" and planning function "dynamic simulation" in our company's SEM System. Installation details are so:
Component version : Netweaver 04
Database: Oracle 9.2.0.5.0
SAP_ABA     640     0010     SAPKA64010
SAP_BASIS     640     0010     SAPKB64010
PI_BASIS     2004_1_640     0006     SAPKIPYI66
SAP_BW     350     0010     SAPKW35010
FINBASIS     300     0012     SAPK-30012INFINBASIS
SEM-BW     400     0012     SAPKGS4012
BI_CONT     353     0005     SAPKIBIFP5
Does SAP not support integration with Powersim in this new version of SEM or is there another way to integrate Powersim with BPS? I have seen these menus in version SEM 3.20 with underlying BW version of 3.10.
Thank you very much.
With best regards.

Hi again,
I know that Powersim is sold by own and has seperate license, but to connect Powersim and BPS there is a delivered planning function in SEM-BPS as I read and in "Planning" menu (in screen bps0) was a menu named "dynamic simulation" in Version SEM 3.2, I had seen this menu option in Version SEM 3.2.
I think these menus are necessary to call simulation model that is prepared by Powersim, otherwise how can I connect my Powersim model to BPS?
Can be the problem Support Package level or something that is not installed to system?
Thanks very much

Similar Messages

SEM BPS material

I am new SEM BPS, please send me the documents for that.
Quick response will be appreciated with points.
My Email Id is [email protected]
And please can somebody share whts the work related to SAP BW as i am BW consultant.
Thanks and Regards
habeeb

hi,
please refer to this sap help.
http://help.sap.com/saphelp_nw04/helpdata/en/05/242537cedf2056e10000009b38f936/content.htm
hope it helps,
regards,
Parth.

Dynamic Simulation in BW BPS ( BI 7.0)

Hi All,
Can anyone please let me know if dynamic simulation planning function is available in BW BPS ( BI 7.0 ) ?If so, How to activate the same.
Regards,
Jeevan

Hello Jeevan,
please see SAP note <a href="http://service.sap.com/sap/support/notes/456373">456373</a>.
Regards,
Marc
SAP NetWeaver RIG

Function types for Balance Sheet Planning missing in SEM-BPS 6.0

Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA 700 0013 SAPKA70013 Cross-Application Component
SAP_BASIS 700 0013 SAPKB70013 SAP Basis Component
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D PI_BASIS 2005_1_700
ST-PI 2005_1_700 0005 SAPKITLQI5 SAP Solution Tools Plug-In
SAP_BW 700 0015 SAPKW70015 SAP NetWeaver BI 7.0
FINBASIS 600 0010 SAPK-60010INFINBASIS FINBASIS 600 : Add-On Supplement
SEM-BW 600 0010 SAPKGS6010 SEM-BW 600 : Add-On Supplement
BI_CONT 703 0007 SAPKIBIIP7 Business Intelligence Content
Message was edited by:
 Lars B Rasmussen

Hi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK

Analysis Authorization with SEM-BPS

Hi,
We have performed technical upgrade from BW 3.5 to BI 7.0. We want to migrate to BI 7.0 functionality phase wise.
We have SEM-BPS and now we want to migrate to Analysis Authorization of BI 7.0.
Once we have igrated to Analysis Authorization, will there be any impact on SEM-BPS? Can we still use SEM-BPS with New Analysis Authorizations? We do not want to move to BI-IP in near future?.
Please advise.
Best Regards,
UR

Dear UR,
Iu2019m going to try helping you,
In difference of reporting functionality, in planning, the data of an InfoCube is not just read; it is also changed or created.
There are two planning tools in BI: BW-BPS (Business Planning and Simulation), and BI Integrated Planning.
There are two main tcode: BPS0 and RSPLAN
There are three authorization objects to manage Integrated Planning:
S_RS_PL_ADMIN - Planning Administrator
S_RS_PL_PLANNER u2013 Planner
S_RS_PL_PLANMOD_D u2013 Planning Modeler (Development System)
The main object in the planning scenario is InfoCube real-time, where can available writing in small package that arrive in parallel. In some cases the security requirements for reporting and planning can be merging. In this case you need authorization object for checking planning, as authorization object above, and you need authorization object for using a query for planning requires as S_RS_COMP.
In addition to authorization for displaying data, the authorizations for changing data you need analysis authorization (the analysis authorization focus in the InfoProvider, no in Aggregation Level).
In your analysis authorization design for reporting stuff, you should use in 0TCAACTVT characteristic 03 value. In the planning stuff, you should use in 0TCAACTVT characteristic 03 and 02 values. As explain following:
Using the characteristics 0TCAACTVT (activity), you can restrict the authorization to different activities. Read (03) is set as the default activity; you must also assign the activity Change (02) for integrated planning.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b1/0c9441b8972e7be10000000a1550b0/frameset.htm
I hope this suggestion can help you answer question,
Luis

SEM-BPS-BCS

hi all i am bw cunsultant and now i am coming into SEM bcs-bps can someone help me out how should i start to learn.
if someone has the documnets please send to me
[email protected]
i shall then very thank full for you

Hi Sanjeev,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently%20asked%20questions%20-%20planning%20with%20sap%20netweaver%20bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

Help with BW/SEM-BPS

Hello Folks,
I am new to BW-BPS.
If you had any material/documentation(BW370 or BW380),FAQ's regarding BW/SEM-BPS can you please send to [email protected]
I would appreciate any help.
Thanks,

Hi,
As u r new to BW, I hope the following links ll be useful to u
go to https://websmp103.sap-ag.de/bi
-> SAP BW 3.5 -> SAP BW Business Planning and Simulation
Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ae9fba90-0201-0010-d490-cbf9a364de95
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements bw-bps formerly sem-bps in sapnetweaver 04.ppt
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/frequently asked questions - planning with sap netweaver bi.faq#q-6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d90209f-0501-0010-59a2-9243ac94a4d7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap bw business planning and simulation - how to guides list.htm
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Hope it helps...let me know
Regards,
R.Ravi

How to Remove totals on few columns from SEM BPS layout

On SEM BPS layout it has 10 5 charatestics columns
and 10 key figure columns.
out of these key figures I want see totals on some
coulmns and for few columns I do not want to see totals.
for wxample it does not make sense of seeing total under
the salary incrase percentage coulmn.
Please suggest anyway we can remove total for some
columns on the layout

Hey, thanks -- everything worked as you described. It never would have occurred to me that the "put back" button refers to the browser selection not the layout selection, for reasons I give below.
I think Aperture exhibits some conceptual confusion here. First of all, a "light table" is created by the New > Light Table command, and you add images to the newly created light table just as you would add them to an album. But those images don't go on the light table layout until you drag them from the browser to the layout table. The "put back" button and "remove from light table" contextual menu command both mean remove from the layout. The phrasing of the contextual menu command make it sounds as if it will remove the clicked image from the light table's collection of images, like removing an image from an album -- it would have made more sense to name this command "put back". Furthermore, the "put back" button is above the layout display, not above the browser, which to me implies that it applies to selections in the layout display. To select an image in the browser, and click "put back selected" seems backwards -- if you just selected the image in the browser, your attention is focused on the browser, not the layout; from the browser's point of view, the button should read "bring back" not "put back".
The documentation didn't really help when I was trying to figure this out. Sometimes the Aperture documentation refers to just a "light table", as on the overview on page 732. On pages 733 and 734, though, it refers to a "light table album". On page 735 of the Aperture manual there is a very brief explanation of how "to add images to the light table" and "to remove an image from the light table". Here, "light table" refers to the layout not the album. The explanation of the "Put Back Selected" button says to select an image then click the button, and the picture shown is of an image selected in the layout, not in the browser.

Requesting the relevant links for step-by-step or TAB'S for SEM-BPS

Hello Pro's,
Greetings for all.
I am surendra. I am working as a bw consultant since 2years. Now I want to learn SEM -BPS. i am exploring SDN to learn SEM-BPS, but it is very complicated to understand.
I request you to suggest ease method to learn the sem-bps and also if any materials like step-by-step or TAB'S.
please post the relevant links for step-by-step or TAB'S.
Thanks,
suri

Hi Surendra,
go to https://websmp103.sap-ag.de/bi -> SAP BW 3.5 -> SAP BW Business Planning and Simulation. Here you can find "HOW TO... Guides - BPS", "SEM-BPS ASAP" and other useful section with many documents...
Also check this too
http://help.sap.com/saphelp_sem40bw/helpdata/en/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
R.Ravi

Webinar: Business Planning in SAP BW - The SEM-BPS transition to BW-BPS

SAP NetWeaver Know-How Network Webinar:
Business Planning in SAP BW - The SEM-BPS transition to BW-BPS
Wednesday 14 July 2004
11 a.m. EDT
On Wednesday 14 July, Lori Vanourek, a NetWeaver BI RIG Consultant, hosts the webinar titled Business Planning in SAP BW - The SEM-BPS transition to BW-BPS as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
Heres how Lori describes her webinar presentation:
Business Planning is an integral part of SAP NetWeaver '04. Join us as we share SAP's product roadmap for business planning and discuss the transition of BPS from SAP SEM to SAP NetWeaver '04.
SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
How to Participate
(Please go to the SDN Events page to see the article and download the PDF presentation)
Dial-in Information:
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Within the U.S., call: +1.888.428.4473
Outside the U.S., call: +1.651.291.0618
Password: NetWeaver04
WebEx Information:
Topic: SAP NetWeaver Know-How Network
Date: Wednesday 14 July 2004
Time: 11 a.m. EDT
Meeting Number: 742391500
Meeting Password: netweaver04 (lowercase)
WebEx Link: sap.webex.com
Replay Information:
A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720149.
Toll-free: +1.800.475.6701
International: +1.320.365.3844
About the SAP NetWeaver Know-How Webinar Series
The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
Disclaimer
SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

Hello Marc and Sander,
I checked the document status and tested the link myself using a PC external to the SAP environment and did not have any problem. You do have to be logged in to do this. If you are not, you should see a page that will appear which says that a login is required to use that feature. On some occassions, users see an error message instead. I apologize for that.
Kind Regards,
David

SEM - BPS

Hi Folks,
I am thinking that going forward SEM-BPS will be part of BW and SEM will not have any BPS. Is this true? Can some one point me to the document which says about this. I need to present that document for the client.
Thanks in advance,
Trinadha

Trinadha,
please check the SAP Service Marketplace:
http://service.sap.com/bw > SAP BW-BPS
There's plenty of information about this topic.
Regards,
Marc
SAP NetWeaver RIG

SEM BPS Documentation

Hi Gurus,
I am new to BW, and SEM BPS. Please can provide some documentation on SEM BPS which gives some kind of basic ideas and Best Practice.
Thanks in advans...
Regds
Sam

Hi,
following one will be useful for you..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/s-u/sap%20bw%20business%20planning%20and%20simulation%20-%20how%20to%20guides%20list.htm
Also kindly send an email to [email protected]
. I read in one of the forums (Need SEM - BPS Material and Guidance) that he is currently working in SEM-BPS. He should ne able to hel you a lot in this regard.....
Good Luck!!!
Thanks,
Raj

BW BPS vs SEM BPS

Hi Everyone,
can anyone guide me one the diffrence between the BW BPS and SEM BPS . Please do guide me if there is any site /link that provide the above information

Hi
From netweaver 2004 i.e BW3.5 BPS is integrated with BW and called as BW-BPS, prior to this it is part of SEM and called as SEM-BPS
go through this previous thread on similar query
BW-BPS and SEM_BPS
and this Release Notes for SAP NetWeaver '04
Business Information Warehouse
http://help.sap.com/saphelp_nw04/helpdata/en/5d/3c51403ab46f13e10000000a1550b0/RN_BW_EN.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/d-f/enhancements%20bw-bps%20formerly%20sem-bps%20in%20sapnetweaver%2004.ppt#275,21,New functionalities delivered in SEM Support Packages
will give u clear idea
Regards
Kiran
Message was edited by: ravi kiran naalla

Looking for SEM-BPs Bw doc's and Traig material

Hi All
Guys please help me for BW BPS Training Material and Doc's
Thanks
Stob

Besides the How-to-Guides available in SDN, you can also refer help.sap.com
Goto SAP Netweaver> Information Integration>BW>BPS
To get a SEM oriented perspective, you can visit service.sap.com/sem; documentation on SEM-BPS is available there
Also, in help.sap.com....... if you go to mySAP ERP ; you can goto SEM and refer the BPS details there
From my experience if you are looking at help while doing hands on ...... help.sap can prove to be a handful
Cheers

BI Integerated planning and SEM-BPS ???

Hi all ,
I am new to SEM.
Could you tell me
1) if there's any difference between Bi integeraed planning and SEM-BPS ?
2) if so, what are those differences ? & which one is better suited to planning needs ?.
3) also can we use planning areas developed in bw-bps ???
Friends if you have any documentation for the practical part of SEM-bps
could you please send it to [email protected]
thanks in advance
Nidhi Dashora

Hello together,
BI-IP is under contruction and wil be replaced later instead of BW-BPS. For the mean time BW-BPS will exist parallel.
Further details see here: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b87271fb-0701-0010-00bd-b03502b8c011
This is the theorie. In the praxis there are big differences and BI-IP is in a "very eraly stage", you should have at least SP 10, better wait for 12 to able to have at least the most important functionalities in BI-IP.
e. g. you can not plan on hierarchy nodes (e. g. you dont have standard distribute function to distribute from # in a query). This is available from SP12. And so on....
regards
Eckhard Lewin

DYNAMIC SIMULATION MENU IN SEM BPS PLEASE ANSWER

Similar Messages

Maybe you are looking for