Dynamic Subselect?
Hi,
i got an error that the format of the statement isn't correct. How can i solve this problem using dynamic select AND subselect?
data: column_stmt type string,
from_stmt type string,
where_stmt type string.
column_stmt = 'ko~aufnr ko~plnbez po~psmng po~amein po~wemng ko~gstri ko~gsuzi ko~gstrs ko~gltrs kt~maktx'.
from_stmt = 'afko AS ko'
& ' INNER JOIN afpo AS po ON ko~aufnr = po~aufnr'
& ' INNER JOIN aufk AS fk ON ko~aufnr = fk~aufnr'
& ' INNER JOIN makt AS kt ON ko~plnbez = kt~matnr'.
where_stmt = 'kt~spras = sy-langu'
& 'AND po~posnr = ('
& ' SELECT MIN( posnr ) FROM afpo'
& ' WHERE aufnr = ko~aufnr'
SELECT (column_stmt)
FROM (from_stmt)
INTO CORRESPONDING FIELDS OF TABLE re_results
WHERE (where_stmt)
Thanks for help,
O. Cramer
data: column_stmt type string,
from_stmt type string,
where_stmt type string.
column_stmt = 'ko~aufnr ko~plnbez po~psmng po~amein po~wemng ko~gstri ko~gsuzi ko~gstrs ko~gltrs kt~maktx'.
from_stmt = 'afko AS ko'
& ' INNER JOIN afpo AS po ON ko~aufnr = po~aufnr'
& ' INNER JOIN aufk AS fk ON ko~aufnr = fk~aufnr'
& ' INNER JOIN makt AS kt ON ko~plnbez = kt~matnr'.
where_stmt = 'kt~spras = sy-langu'
& *' AND* po~posnr = *( *'
& ' SELECT MIN( posnr ) FROM afpo'
& ' WHERE aufnr = ko~aufnr'
SELECT (column_stmt)
FROM (from_stmt)
INTO CORRESPONDING FIELDS OF TABLE re_results
WHERE (where_stmt)
Similar Messages
-
Problems using Dynamic parameters with Crystal Reports and SBO 8.8
Has anyone been able to successfully use a dynamic parameter in Crystal Reports with 8.8 using the Business One connector? When we try we get an additional logon to the database that pops up and the logon fails.
We need this because we want to return live lists of PO documents from the server for selection. We are also trying to use nested dynamic parameters, because we want to first return the PO document based on the PO number, and then chose specific rows based on a field value in POR1.
It works if we don't use the Business One connector, but then the report doesn't function properly inside of SAP.
Any ideas would be appreciated.I have tried using tokens but they are too simple. I need something like a subselect where you first select one value and then another that is a subset of those values. Apparently the tokens can't even use a "where" clause.
SAP dances around Dynamic parameters, but won't come out and say that they can't be used with the B1 connector. If that is the case then they should just say so and stop wasting our time. Apparently Crystal is not truely interfaced with B1, just sort of hanging out with it.
I don't really care other than I have to do this select, subselect. If someone has a way to do that with tokens I would love to hear it.
Thanks,
Roy -
Unable to capture data in an editable dynamic ALV.
Hi ,
I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
The problem is that the control is not entering the event handler for the data_check event.
If i raise the data_check event in my save event handler or any other event handler , it works fine.
Can someone please suggest a solution.
Regards,
Newton.Hi ,
I have figured out that the problem is local to my machine , because the code works fine on other machines.
I guess my internet explorer has some bug.
Regards,
Newton. -
Dynamic mandatory field error message is not getting displayed in webui
Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P -
If table testrh2 has the following columns and data
col1 --> NULL
col2 --> 2
and table testrh has the following columsn and data
col1 --> NULL
How could I write a dynamic SQL statement to join on the nulls? I've written the following block as a starting point.
declare
cursor c1 is select col1 from isis.testrh;
lval varchar2(1000);
lval2 varchar2(1000);
begin
for r1 in c1 loop
lval := 'select col2 from isis.testrh2 where col1 = '||r1.col1;
execute immediate lval into lval2;
dbms_output.put_line(lval2);
end loop;
end;You can't compare null values with '=' in Oracle SQL.
Null can only be compared with <column> is null .
You can see it when you try these two queries:
select * from dual where null is null; -- you will see one row
select * from dual where null=null; -- you will see no rowsThat's why you have to write something like
(<column1>=<column1> or (<column1> is null and <column2> is null))This should also work with null:
decode(<column1>,<column2>,1,0)=1By the way, why do you use dynamic sql?
lval := 'select col2 from isis.testrh2 where col1 = '||r1.col1;
I think you could replace your two lines ( lval:= ... AND execute immediate) by this:
begin
select col2
into lval
from isis.testrh2
where decode(col1,r1.col1,1,0)=1;
dbms_output.put_line('lval='||lval);
exception
when no_data_found then
dbms_output.put_line('no data found'); -- or whatever you want
end;Edited by: hartmutm on 02.10.2010 23:54 -
Dynamic CRM 2013 Online how to execute Report, generate PDF and email
Dear All,
I am using Dynamic CRM 2013 online. For quote, I have workflow and Dialogue processes for review process. On approval, I want the system to generate a PDF of quote report, attach the PDF and email it to the Customer.
Better I would like, When approver, clicks on the approve button, the system should auto generate a PDF of quote report, attach the PDF and email it to the Customer, without any further input from the user. If its not possible, I may have to put button on
quote form.
I am using the attached code, but facing various issues.
1. Under prepare the SOAP Message coding part, I am not sure what should be the below URL for CRM 2013 Online?
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
2. What should be the emailid here? Is it Recepient Contact id(Guid) ?
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
3. Using this code, not able to create Entity for "ActivityMimeAttachment", I am getting newEntity as undefined.
Below is the code I am using. Please check and help me out, where I am going wrong. Let me know if any better way to implement it. At present, I have put one button on quote form, on click event, below code will get executed.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script type="text/javascript">
var Xrm;
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
function getReportingSession() {
var reportName = "Quotation_Report"; //set this to the report you are trying to download
var reportId = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var recordid = Xrm.Page.data.entity.getId();
// recordid = recordid.substring(1, 37); //getting rid of curly brackets
alert(recordid);
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
retrieveEntityReq.send("id=%7B" + reportId + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" + reportName + "&isScheduledReport=false");
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
function createEntity(ent, entName, upd) {
var jsonEntity = JSON.stringify(ent);
var createEntityReq = new XMLHttpRequest();
var ODataPath = Xrm.Page.context.getServerUrl() + "XRMServices/2011/OrganizationData.svc";
createEntityReq.open("POST", ODataPath + "/" + entName + "Set" + upd, false);
createEntityReq.setRequestHeader("Accept", "application/json");
createEntityReq.setRequestHeader("Content-Type", "application/json; charset=utf-8");
createEntityReq.send(jsonEntity);
var newEntity = JSON.parse(createEntityReq.responseText).d;
alert("new entity" + newEntity);
return newEntity;
function createAttachment() {
var params = getReportingSession();
var recordid = Xrm.Page.data.entity.getId();
alert("recordid " + recordid);
var orgName = Xrm.Page.context.getOrgUniqueName();
var userID = Xrm.Page.context.getUserId();
//create email record
// Prepare the SOAP message.
var xml = "<?xml version='1.0' encoding='utf-8'?>" +"<soap:Envelope xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'" +
" xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance'" +
" xmlns:xsd='http://www.w3.org/2001/XMLSchema'>" +
"<soap:Header>" +
"</soap:Header>" +
"<soap:Body>" +
"<Create xmlns='http://schemas.microsoft.com/crm/2007/WebServices'>" +
"<entity xsi:type='email'>" +
"<regardingobjectid type='quote'>" + recordid + "</regardingobjectid>" +
"<subject>" + "Email with Attachment4" + "</subject>" +
"</entity>" +
"</Create>" +
"</soap:Body>" +
"</soap:Envelope>";
// Prepare the xmlHttpObject and send the request.
var xHReq = new ActiveXObject("Msxml2.XMLHTTP");
xHReq.Open("POST", "/mscrmservices/2007/CrmService.asmx", false);
xHReq.setRequestHeader("SOAPAction", "http://schemas.microsoft.com/crm/2007/WebServices/Create");
xHReq.setRequestHeader("Content-Type", "text/xml; charset=utf-8");
xHReq.setRequestHeader("Content-Length", xml.length);
xHReq.send(xml);
// Capture the result
var resultXml = xHReq.responseXML;
// alert("resultXml " + resultXml);
// Check for errors.
var errorCount = resultXml.selectNodes('//error').length;
if (errorCount != 0) {
alert("ERROR");
var msg = resultXml.selectSingleNode('//description').nodeTypedValue;
alert(msg);
var emailid = resultXml.selectSingleNode("//CreateResult").nodeTypedValue;
alert("emailid" + emailid.toString());
//var emailid = userID;
var post = Object();
post.Body = encodePdf(params);
var email = new Array();
email[0] =new Object();
email[0].id = emailid;
email[0].entityType ='email';
post.Subject ="File Attachment";
post.AttachmentNumber = 1;
post.FileName ="Report.pdf";
post.MimeType ="application/pdf";
post.ObjectId = Object();
post.ObjectId.LogicalName ="email";
post.ObjectId.Id = email[0].id;
post.ObjectTypeCode ="email";
alert(post.ObjectId.Id);
createEntity(post,"ActivityMimeAttachment", "");
alert("created successfully");
email.Subject = "Your Order";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: customerId, // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerId, // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity). activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] + "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] + "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
</SCRIPT>
<SCRIPT type=text/vbscript>
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</SCRIPT>
</head>
<body>
<input type="button" onclick="createAttachment();" value="Attach Report" />
</body>
</html>
Thanks. and waiting for your valuable comments.
- MittalHello,
Yes, I was able to make my code working as below. Tested on CRM online 2013.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title></title>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
<script type="text/javascript">
if (typeof (SDK) == "undefined")
{ SDK = { __namespace: true }; }
SDK.JScriptRESTDataOperations = {
_context: function () {
if (typeof GetGlobalContext != "undefined")
{ return GetGlobalContext(); }
else {
if (typeof Xrm != "undefined") {
return Xrm.Page.context;
else { return new Error("Context is not available."); }
_getServerUrl: function () {
var serverUrl = this._context().getServerUrl()
if (serverUrl.match(/\/$/)) {
serverUrl = serverUrl.substring(0, serverUrl.length - 1);
return serverUrl;
_ODataPath: function () {
return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
_errorHandler: function (req) {
return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
_dateReviver: function (key, value) {
var a;
if (typeof value === 'string') {
a = /Date\(([-+]?\d+)\)/.exec(value);
if (a) {
return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
return value;
Create: function (object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 201) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Retrieve: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
Update: function (id, object, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "MERGE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send(JSON.stringify(object));
Delete: function (id, type, successCallback, errorCallback) {
var req = new XMLHttpRequest();
req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.setRequestHeader("X-HTTP-Method", "DELETE");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 204 || this.status == 1223) {
successCallback();
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
if (filter != null) {
filter = "?" + filter;
else { filter = ""; }
var req = new XMLHttpRequest();
req.open("GET", this._ODataPath() + type + "Set" + filter, true);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
req.onreadystatechange = function () {
if (this.readyState == 4 /* complete */) {
if (this.status == 200) {
successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
else {
errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
req.send();
__namespace: true
</script>
<script type="text/javascript">
//Create Email and link it with Order as Regarding field
var Xrm;
var email = new Object();
var ownerID = "";
var CustomerId = "";
if (window.opener) { Xrm = window.opener.Xrm; }
else if (window.parent) { Xrm = window.parent.Xrm; }
//Get ownerid who send email of quotation to customer
function GetOwnerID() {
var owner = Xrm.Page.getAttribute("ownerid").getValue();
ownerID = owner[0].id;
var ownerName = owner[0].name;
var entityType = owner[0].entityType;
GetToEmailGUID();
//Get customerid who receive email of quotation from owner
function GetToEmailGUID() {
var Customer = Xrm.Page.getAttribute('customerid').getValue();
CustomerId = Customer[0].id;
var CustomerName = Customer[0].name;
var entityType = Customer[0].entityType;
//if CustomerId is type of "Account" then get Primary Contact id of that account
if (entityType == "account") {
var contact = Xrm.Page.getAttribute("customerid").getValue();
if (contact === null) return;
var serverUrl = Xrm.Page.context.getClientUrl();
var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
var req = new XMLHttpRequest();
req.open("GET", oDataSelect, false);
req.setRequestHeader("Accept", "application/json");
req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
req.onreadystatechange = function () {
if (req.readyState === 4) {
if (req.status === 200) {
var retrieved = JSON.parse(req.responseText).d;
CustomerId = retrieved.PrimaryContactId.Id;
else {
alert(this.statusText);
req.send();
function CreateEmail() {
GetOwnerID();
email.Subject = "Email with Report Attachment";
//Set The current order as the Regarding object
email.RegardingObjectId = {
Id: Xrm.Page.data.entity.getId(), //Get the current entity Id , here OrderId
LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
//Create Email Activity
SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
// Email Call Back function
function EmailCallBack(result) {
email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
var activityPartyFrom = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyFrom.PartyId = {
Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "contact"
// Set the "activity" of the ActivityParty
activityPartyFrom.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
// Create the from ActivityParty for the email
SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
var activityPartyTo = new Object();
// Set the From party of the ActivityParty to relate an entity with Email From field
activityPartyTo.PartyId = {
Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
LogicalName: "systemuser"
// Set the "activity" of the ActivityParty
activityPartyTo.ActivityId = {
Id: result.ActivityId,
LogicalName: "email"
// Now set the participation type that describes the role of the party on the activity).
activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
// Create the from ActivityParty
SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
//ActivityParty From Callback
function ActivityPartyFromCallBack(result) {
//ActivityParty To Callback
function ActivityPartyToCallBack(result) {
GetReportId('Quotation');
//Create attachment for the created email
function CreateEmailAttachment() {
//get reporting session and use the params to convert a report in PDF
var params = getReportingSession();
//Email attachment parameters
var activitymimeattachment = Object();
activitymimeattachment.ObjectId = Object();
activitymimeattachment.ObjectId.LogicalName = "email";
activitymimeattachment.ObjectId.Id = email.ActivityId;
activitymimeattachment.ObjectTypeCode = "email",
activitymimeattachment.Subject = "File Attachment";
activitymimeattachment.Body = encodePdf(params);
activitymimeattachment.FileName = "Report.pdf";
activitymimeattachment.MimeType = "application/pdf";
//Attachment call
SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
//ActivityMimeAttachment CallBack function
function ActivityMimeAttachmentCallBack(result) {
var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
var width = "800px";
var height = "600px";
window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
// To open window which works in outlook and IE both
//openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width, height, features);
//This method will get the reportId based on a report name that will be used in getReportingSession() function
function GetReportId(reportName) {
var oDataSetName = "ReportSet";
var columns = "ReportId";
var filter = "Name eq '" + reportName + "'";
retrieveMultiple(oDataSetName, columns, filter, onSuccess);
function retrieveMultiple(odataSetName, select, filter, successCallback) {
var serverUrl = Xrm.Page.context.getServerUrl();
var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
if (select) {
odataUri += "$select=" + select + "&";
if (filter) {
odataUri += "$filter=" + filter;
$.ajax({
type: "GET",
contentType: "application/json; charset=utf-8",
datatype: "json",
url: odataUri,
beforeSend: function (XMLHttpRequest) {
XMLHttpRequest.setRequestHeader("Accept", "application/json");
success: function (data) {
if (successCallback) {
if (data && data.d && data.d.results) {
successCallback(data.d.results);
else if (data && data.d) {
successCallback(data.d);
else {
successCallback(data);
error: function (XmlHttpRequest, errorThrown) {
if (XmlHttpRequest && XmlHttpRequest.responseText) {
alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
function onSuccess(data) {
reportId = data[0].ReportId.replace('{', ").replace('}', ");
CreateEmailAttachment(); // Create Email Attachment
//Gets the report contents
function getReportingSession() {
var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
var retrieveEntityReq = new XMLHttpRequest();
var Id = Xrm.Page.data.entity.getId();
var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
quotationGUID = quotationGUID.replace('}', "");
var reportName = "Quotation"; //set this to the report you are trying to download
var reportID = "7C39D18F-1DC6-E311-8986-D89D6765B238"; //set this to the guid of the report you are trying to download
var rptPathString = ""; //set this to the CRMF_Filtered parameter
var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
retrieveEntityReq.open("POST", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName=" +
reportName + "&isScheduledReport=false&p:CRMAF_Filteredquote=" + strParameterXML;
//remove the part starting from &p:salesorderid if your report has no parameters
retrieveEntityReq.send(rptPathString);
var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
var ret = new Array();
ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
x = retrieveEntityReq.responseText.indexOf("ControlID=");
ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
return ret;
var bdy = new Array();
var bdyLen = 0;
function concat2Bdy(x) {
bdy[bdyLen] = x;
bdyLen++;
function encodePdf(params) {
bdy = new Array();
bdyLen = 0;
var retrieveEntityReq = new XMLHttpRequest();
var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
"&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
"&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
retrieveEntityReq.open("GET", pth, false);
retrieveEntityReq.setRequestHeader("Accept", "*/*");
retrieveEntityReq.send();
BinaryToArray(retrieveEntityReq.responseBody);
return encode64(bdy);
var StringMaker = function () {
this.parts = [];
this.length = 0;
this.append = function (s) {
this.parts.push(s);
this.length += s.length;
this.prepend = function (s) {
this.parts.unshift(s);
this.length += s.length;
this.toString = function () {
return this.parts.join('');
var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
function encode64(input) {
var output = new StringMaker();
var chr1, chr2, chr3;
var enc1, enc2, enc3, enc4;
var i = 0;
while (i < input.length) {
chr1 = input[i++];
chr2 = input[i++];
chr3 = input[i++];
enc1 = chr1 >> 2;
enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
enc4 = chr3 & 63;
if (isNaN(chr2)) {
enc3 = enc4 = 64;
} else if (isNaN(chr3)) {
enc4 = 64;
output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
return output.toString();
</script>
<script type="text/vbscript">
Function BinaryToArray(Binary)
Dim i
ReDim byteArray(LenB(Binary))
For i = 1 To LenB(Binary)
byteArray(i-1) = AscB(MidB(Binary, i, 1))
concat2Bdy(AscB(MidB(Binary, i, 1)))
Next
BinaryToArray = byteArray
End Function
</script>
</head>
<body>
<input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>
Thank you,
Mittal. -
Dynamically set template for Print Quote report
We need to customize "Print Quote" in Quoting
As part of this we will be having 2 custom templates (will be related to data definition "Quote Printing", ASOPRT).
These two templates have to be defaulted based on the quote status - one for status "Approved", and the other template for other non "Approved" statuses.
How can this be achieved dynamically? (OAF CO customization / personilization)
There doesn't seem to be any setup for assigning different templates based on status.
Profile option "ASO: Default Layout Template" can be utilized to change the default template, but we need this template to be defaulted dynamically based on the Quote status.
Thanks,
Sumanth
Edited by: user1131947 on Oct 25, 2011 3:51 AMIf you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand -
How to rename C00n generic column names in a Dynamic SQL report
I have a an interface whereby the user can select 1 to 60 (upper limit) columns out of 90 possible columns (using a shuttle) from one table before running a report.
To construct the SQL that will eventually execute, I'm using a "PLSQL function body returning SQL query" with dynamic SQL. The only problem is that I have to use "Generic Column Names" option to be able to compile the code and end up with c001 to c060 as the column names.
How can I use the names of the selected columns as the report headings rather than c001, C002... etc?
I do not know beforehand which columns, or how many columns or the order of the selected columns.
I know Denes K has a demo called Pick Columns but I can't access his code. I have a hunch though that he may be just using conditions to hide/show the apropriate columns.
thanks in advance
PaulPHi Paul
I would change the Heading Type in the Report Details screen to PLSQL and use the shuttle item to return the column values. e.g.
RETURN :p1_shuttle;
I'm assuming the shuttle already has a colon separated list of the column headings in the correct order?
I hope that helps
Shunt -
Inserting Dynamic Images in to a Crystal Report 10
Hi all,
I am trying to insert dynamic pictures into my report from repository, by getting the path for the picture from database fields. The version that I am using is Crystal Reports 10.
Here is what I have done.
I inserted an OLE object into the report, went to "Format Graphics" by right clicking on the OLE object, then to "Hyperlink" Tab (as I didn't see anything other than "Reset" button and picture dimension options under the "Picture" tab), and selected "File" Radio button (as I didn't want to display the picture as Hyperlink) and gave the @Filepath as the formula there. @Filepath is the formula that gives me the complete path for the JPEG that I need to insert in the report.
filepath = field A + field B
where field A is the location for the image and field B is the actual image name.
the actual image is located in repository folder.
I am not able to see the image in the report "Preview" section as it is showing it has an empty box and when I click on that empty OLE object, I am able to view the image in a separate window where as my requirement is to view the image within the report (not in a separate window).
I didn't find anything useful under Format Graphics -> Picture tab.
I appreciate any kind of help from you all.
Thanks!That feature wasn't available nor was it supported in CR 10. You'll have to upgrade to CR Xi R2 or 2008 to allow using a database field as the location of the file.
CR 10 would only load the picture when the report is opened, it will never update when clicking on the refresh button. -
How can I insert data in different table dynamically?
I have one requirement ,In these I have transaction table in which payLoad contain data like employee record,PO record,SO record in XML format.Now I have transfer the data from transaction table to particular table(Emp,SO,PO) dynamical ? how can I do it.. Give me your suggestion guys?? Thanks in Advance
Hello,
Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
3> i made that association composite by clicking the checkbox
4> i created 2 VO from 2 EO.
5> put those VO in Application Module.
6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
Now what to do please? -
How to use one dynamic connection managers for multiple parallel data flow tasks
hi there:
I have 6 databases residing on the same server. What I want to do is call a store procedure with identical name on each database dbo schema and transport results to a centralized place. The key is to have those SPs run in parallel instead
of in sequence as each SP may take around 10 mins to finish.
The simplest way is to create 6 OLE DB connection managers and create 6 DFT tasks. However, I do not want to maintain 6 OLE DB connection managers as there is a chance to have more connection managers.
What I did so far is to create a OLD DB connection manager and use expression to set up connectionString properties so that it will get populated by variables at run time. It is fine when running all SPs in a Foreach Loop Container. However, it takes
around 60 mins to finish.
When I try to run it in parallel ( basically created 6 DFTs but use only one Dynamic Connection Manager), the connection string gets confused therefore all DFT tasks failed.
Does anyone here have some experience on this topic?
Thanks
hui
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Yes, basically, on the connectionString property of ONE OLEDB, you are using an expression to supply value and this expression is pointing to a variable.
In this case , you can update this variable from a table which contains many connection strings. It's good if you want to execute Store procedures in a sequential order. When in parallel mode, this will cause issues as connectionString gets overwritten.
I am thinking about using script task to exec sp.
The whole idea is that I do not want to maintain a large number of Connection Managers.
Hope it helps
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --
So you are not able to run parallel executions using same conn mgmr, even with dynamic connectionstring, is that correct? Yes, script task will be a way to go if you wish to execute it in parallel, you may connect to SS and query the proper conn string with
SELECT/WHERE clause in each script > pass it to a script variable > use that script variable and execute the proc. This will require only two things to change in each script, the WHERE condition to get the conn string and the proc name (you may even
get the proc names the same way you get conn string) and everything else will be same. Let us know how that goes.
Hope no two or more procs doing insert/update/delete on the same tables. -
Creating dynamic value range, one week at a time
Every Monday, I query a table to get data for the past week, every Monday (last Monday) to Sunday. I do some calculations with the data and insert the data and dates into a table.
I then use cfchart to create a graph using this data. The drilldown uses the same weekly date range to produce a report. So the record count for the chart and the report should be the same.
What I just discovered is that more data can be added to the query table after I have already obtained the data. Since the data for the chart is already in the table, it is static. But the report is dynamice since it uses the weekly date range everytime the drilldown is selected. This causes the count of the report to be different than the count of the chart.
Instead of gathering data every Monday and inserting into a table, for the chart, how can I make the chart data dynamic ?
I need to plot a rolling 12 weeks worth of data, always from Monday to Sunday, inclusive. So if I decide to run the chart on a Wednesday, how would I gather the twelve weeks worth of data, always from Monday to Sunday ? I need to make this dynamc.
The reports always work because the drilldown is pasing it the dates, thats why the count is always correct. But I do not know how to do this with the chart, which needs to be dynamic also, since static will not work.
Any help appreciated. ThanksTrojfn,
For gathering the data and inserting the same in to a table, why can't you use the scheduled tasks?. -
SSRS - Expression to color column value dynamically in Matrix
Hi ,
I have a matrix which looks like :
The <<Expr>> value can be 1 /0 /"-" .
The Expr value is being calculated dynamically.
The data set query I am using has a column called due_days.
In the color expression of the <<Exp>> box I am using the expression as :
=IIf(Fields!Due_Days.Value>14 and Fields!Notes_Count.Value>0,"Blue",(Iif(Sum(Fields!Notes_Count.Value)=0 ,"Red","Black")))
My requirement is if the Due_Days column value is >14 then I need to highlight the value as blue else black and if value is 0 then red. When I use the above query it is just highlighting the color blue for 1st column only. Eg: 4th row . Due days for month
of Oct and Nov is > 14 but it shows blue only for month of oct.
How can i resolve the issue?In select query i have 5 columns:
Due days(Which is difference between 2 dates) ,
Notes count (Which is just a count of notes entered or not having value 0/1 and value '-' if another column CRD is greater than the matrix month and year.)Eg: below date 11/12/2014 is greater than Oct 2014 hence Oct 2014 should have "-"
Month Name , Year , Month Nbr (last 6 months which I cross joined with the table to get counts for each month)
The matrix has year and last 6 month as column groups
Color coding should be if notes count is 0 then red ,if notes count is 1 and due_days> 14 then blue else black . When i try to use expression for color as i mentioned above, it colors only 1st colum.eg: 2nd row
Nov 2014 is blue but for jan 2014 also it should show blue as due days>14 .
Is there any way i can do that ??
Eg: data set returns value as :
Due Days CRD Month
Month_Nbr Year Notes _Count
5 2014-11-28 00:00:00.000 December 12 2014
0
5 2014-11-28 00:00:00.000 February 2 2015
0
5 2014-11-28 00:00:00.000 January 1 2015
0
5 2014-11-28 00:00:00.000 November 11 2014 1
5 2014-11-28 00:00:00.000 October 10 2014 0
5 2014-11-28 00:00:00.000 September 9 2014 0
Matrix is of the form :
YEAR
MONTH
CRD Notes_count -
How to load a class dynamically in the current/system class loader
I need to dynamically load a new jdbc driver jar to the current/system class loader... Please note that creating a new classloader will not help since the DriverManager refers to the systemclassloader itself.
Restarting the application by appending the jar to its classpath will solve the problem but I want to avoid doing this.Did you then create a ClassLoader to load the JDBC
driver and then install it into the system as
directed by the JDBC specification (ie
Class.forName(someClassName))?
And then try to use it from a class loaded fromsome
other ClassLoader (i.e. the system class loader)?
If you did not try this please explain why not.O.K. I just looked at the source to
java.sql.DriverManager. I did not know what I was
talking about, as what I suggested above will not
work.
This is my new Idea:
Create a URLClassLoader to load the JDBC driver also
in this ClassLoader you need to place a helper class
that does the following:
public class Helper {
public Driver getJDBCDriver(String driverClassName,
String url) {
try {
Class.forName(driverClassName);
Driver d = DriverManager.getDriver(url);
return d;
catch(Exception ex) {
ex.printStackTrace();
return null;
}Now create an instance of the Helper class in the new
ClassLoader, and call its getJDBCDriver method to get
an instance of the driver (you will probably have to
create an interface in the root class loader that the
Helper implements so that you can easily call it).
Now from the root classloader you can make calls
directly to the returned Driver and bypass the
DriverManager and its restrictions on cross
ClassLoader access.
The only catch here is that you would have to call to
the returned Driver directly and not use the Driver
Manager.This sounds like will work but I did not want to load DriverManager in a new classloader.. I did a hack
I unzip the jar dynamically in a previously known location (which I included in my classpath when launching the app). The classLoader finds the class now though it did not exist when the app was launched !
A hack of-course but works eh .. -
Embed view in view container dynamically
Hello Experts,
I have links in my web dynpro ABAP view, when user clicks on a link I need to show another view in view container. For example I have two links in my view and when user clicks on link1 I need to show VIEW1 to the user in the view container UI element, if user clicks on link2 I need to show VIEW2. I have written the below code in Link action method. But it is not working. Any one can help in this?
DATA : lo_window_controller TYPE REF TO if_wd_window_controller.
DATA : lo_view_controller TYPE REF TO if_wd_view_controller.
DATA : lo_window_rr TYPE REF TO if_wd_rr_window.
lo_view_controller = wd_this->wd_get_api( ).
lo_window_controller = lo_view_controller->get_embedding_window_ctlr( ).
lo_window_rr = lo_window_controller->get_window_info( ).
Embedding view
lo_window_rr->embed_view( used_view_name = 'V_EMP_TERMINATION'
embedding_position = 'V_ACTION/VCU_CONTAINER'
used_component_name = 'ZHR_MSS_APPL' ).
with best regards
K. Mohan ReddyHi mohan ,
You written the code for embedding the view . then you have to creat the navigation link then only you can do navigation
Look at the sample code for creating the navigation link dynamically
DATA lo_navi_services TYPE REF TO if_wd_navigation_services_new.
DATA lo_api_v_main_wf TYPE REF TO if_wd_view_controller.
DATA lo_navi_services TYPE REF TO if_wd_navigation_services_new.
DATA lo_view_usage TYPE REF TO if_wd_rr_view_usage.
DATA lo_window TYPE REF TO if_wd_rr_window.
lo_api_v_main_wf = wd_this->wd_get_api( ).
lo_navi_services ?= lo_api_v_main_wf.
lo_view_usage = lo_api_v_main_wf->get_view_usage( ).
lo_window = lo_view_usage->get_window( ).
CONSTANTS lc_target TYPE string VALUE 'VIEW_MAIN_WF/VC_WF'. "viewname /view vontainer name
*Write the code for getting the view name here
if view_name is not initial
TRY.
lv_window_name = lo_window->get_name( ).
wd_comp_controller->fire_unactivate_all_pro_event( ).
wd_this->m_navi_repository_handle = lo_navi_services->do_dynamic_navigation(
source_window_name = 'lv_window_name'
source_vusage_name = lo_view_usage->name
source_plug_name = 'source_out_plug'
plug_parameters = lv_plug_parameter
target_view_name = lv_view_name
target_plug_name = 'FROM_Plug'
target_embedding_position = lc_target )."lv_target ).
CATCH cx_wd_runtime_repository INTO lr_error.
ENDTRY.
hope thisl piece of code is help full
regards
chinnaiya
Maybe you are looking for
-
How do I show multipile top limits in a graph?
For my EMC-testing app I need to show two different type of limits (A&B) in a Graph, together with the input scope-signal. When the B (lower) top limit is an array with the peak(s) is outputted. Same for A limit. I have got one limit going but can't
-
HT201272 how to turn on my ipod
how to restart or reset my ipod
-
Inset bevel on stacked canvas - is it possible?
Hello. I want to create a stacked canvas with an inset bevel, but when I run the form the inset bevel is not shown. The only bevels that shows is lovered and raised. Does anyone know how to get an inset bevel to show, so that the stacked canvas apear
-
Prob. - ATI 4850: "Display driver stopped responding and has recovered"
Hey all! I finally got my new iMac last week. After installing BootCamp my graphics card driver always crashes just after starting Windows (Windows 7 Pro 64bit). I do not need to run any software but the screen shows some "glitches" => black screen =
-
My photos are not loading to my computer even though it is backing up to icloud every day
My photos are not loading on my computer from my iphone. I have backed up to icloud...but nothing new shows up in my photos...the last photos are from October