Dynamic template in EPM 10.0 version

Hi,
I am creating a dynamic template where the Employees and Cost centers are two dimensions. Under employee dimension, cost centers have been added as properties as shown below:
ID                                           Costcenter
ALLEMP                                 
EMP001                                   2358
EMP002                                   2358
EMP003                                   2358
EMP004                                   2358
EMP005                                   2354
EMP006                                   2354
EMP007                                   2354
EMP008                                   2354
EMP009                                   2358
EMP010                                   2354
i have designed the Employees dimension members in row n time in column. While creating the template i can see the only 2354 employees. My requirement is if i change the context member from 2354 to 2358 then only those employees must appear which are shown under their respective properties. i have already checked filter because of which i can see only 2354 members but i want it to be dynamic and also that if i select 2354 then only 2354 members must appear and vice versa. It should not be static.
Please guide.
Thank you.
Rgds,
Poonam

There are two new functions in BPC 10 that will help:
EPMAxisOverride and EPMContextMember
Assuming you are using the first report on the sheet (default report), use the following:
Build the report, then on the same sheet as the report, enter the following formula (in any cell outside of the report):
=EPMAxisOverride("000",FALSE,"EMPLOYEE","CC='"&EPMContextMember("COSTCENTER")&"'")
Assuming your dimensions are named "EMPLOYEE" and "COSTCENTER".  Also, assumes the cost center property on EMPLOYEE is named "CC".
Let me know if you have any trouble. 
Steve

Similar Messages

  • Input Template in EPM 10.0 version

    Hi,
    i am creating a dynamic template where the Employees and Cost centers are two dimensions. Under employee dimension, cost centers are also properties as shown below:
    ID                                           Costcenter
    ALLEMP                                 
    EMP001                                   2358
    EMP002                                   2358
    EMP003
    EMP004
    EMP005
    EMP006
    EMP007
    EMP008
    EMP009
    EMP010
    EMP999
    EMPNEW1
    EMPNEW2
    EMPNEW3
    EMPNEW4
    EMPNEW5

    There are two new functions in BPC 10 that will help:
    EPMAxisOverride and EPMContextMember
    Assuming you are using the first report on the sheet (default report), use the following:
    Build the report, then on the same sheet as the report, enter the following formula (in any cell outside of the report):
    =EPMAxisOverride("000",FALSE,"EMPLOYEE","CC='"&EPMContextMember("COSTCENTER")&"'")
    Assuming your dimensions are named "EMPLOYEE" and "COSTCENTER".  Also, assumes the cost center property on EMPLOYEE is named "CC".
    Let me know if you have any trouble. 
    Steve

  • Error while opening the dynamic Template

    Hi Experts,
    While opening the Dynamic Templates in application in Sap Bpc it will give me an error: Description information is missing: contact your administrator. Please help me in this.

    Hello,
    Please try the following:
    Clear the client cache if the problem is with a single client:
    In BPC for Excel, click the eTools menu and select u2018Client Optionsu2019.
    Click u2018Clear local application informationu2019.
    Click u2018Refresh Dynamic Temnplatesu2019.
    This will force the client machine to download the templates again.
    Change the template version for the Application Set (AppSet) if the problem is with multiple clients:
    Launch the BPC u2018Interface for the Webu2019.
    Select u2018Administrationu2019.
    Select u2018AppSet Parametersu2019.
    Find the TEMPLATEVERSION parameter.
    Increment the value by one.  For example, if the value is .103, change the value to .104 and click the Update button.
    This will force all of the client machines to download the templates again.
    Manually download the files:
    These files can be found in two locations.
    Check the local machine for the files:
    Check the local paths on the client machine to see if the needed files are there.  The local paths for these files are:
    My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Reports\Wizard.
    My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Input Schedules\Wizard.
    The files should be:
    DESCRIPTION.TXT
    IMAGE#.BMP
    TEMPLATE#.XLT (where # is the specific number of the file).
    If these files do not exist, they can be copied over from a working system.  If all systems are giving this error, the files can be retrieved from NetWeaver.
    To find the files in NetWeaver:
    Run transaction UJFS.
    Expand u2018webfoldersu2019.
    Expand the Application Set (AppSet).
    Expand the Application.
    Expand u2018eexcelu2019.
    Expand u2018reportsu2019.
    Expand u2019wizardu2019.
    The files located in this directory should also be located in My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Reports\Wizard.
    To download all of these files, right click the u2018wizardu2019 folder and select u2018Download All Documentsu2019.
    Once the files are downloaded, unzip them into the local directory.
    go back to u2018eexcelu2019 from Step 5.
    Expand u2018input schedulesu2019.
    Expand u2019wizardu2019.
    The files located in this directory should also be located in My Documents\PC_NW\<domain>\<user>\AppInfo\<applicationset>\<Application>\eExcel\Input Schedules\Wizard.
    Follow Steps 9-10.
    If these files do not exist in NetWeaver, they may not have been transported properly.  If this is the case, go to the source system and download the files and then right click the folder in NetWeaver and select u2018Upload Document from PCu2019 on the destination system.
    Best regards,
    Vin

  • Dynamic template report zero suppression

    Hi
    I  have a report which  was developed using dynamic template  and it works fine. When I configure the  zero suppression for row ( yes in control ) yes, it suppress the rows with  zero in first column. So it  suppress the row which  has  some values in second column  but zero in first row. It does  not suppress the rows if  the first column has values but second column has zero.What I  want  ? to suppress zero only when all the columns ( 2 in my case ) has zero values. I donu2019t see any other  configuration option in control. Can some one guide me how to suppress  zero  only when all the columns in any row is zero.
    Thanks in advance
    SN

    Hi SN,
    If both columns are part of the EVDRE (included in the column range and pulled from the server) then this is not the correct behavior. What version of BPC are you on (7.0/7.5, and support pack)?
    If the second column is not populated with data from the server, then this could happen, depending on how you have built your EVDRE.
    Can you provide more detail about how the columns are populated?
    Ethan

  • REPORTS folder does not appear when refreshing dynamic templates

    Hi all,
    I got one issue when refreshing dynamic templates. For one application, the REPORTS folder does not appear under Eexcel folder.
    It works well on my quality environment, but it fails on production server.
    It seems there is no differences in security settings, SP version...
    I already tried deleting Outlooksoft folder, clear and refresh local folder in client options...
    I must miss something but I dont know what to check anymore.
    Any suggestion is welcome.
    Thanks
    Antoine

    Hi Neil,
    I do not have issue with what you mention, everything is ok in Webfolder.
    The problem is in the local folder of every user in My Documents folder.
    There is a folder Outlooksoft there that is refreshed automatically after connecting to BPC.
    Every reports under REPORTS\WIZARDS should be there. Users need to access this folder to open a specific report.
    What is strange is that it looks that it works for some users, but does not work for some other users...
    Might be security settings?
    Antoine

  • Dynamic Template queries

    Hi,
      i have created a user defined dimension called "items", but somehow this dimension didn't automatically appear in my "freeze dimension setting" in the dynamic templates. and when i tried to manually input "items" at the next available row in "freeze dimension setting", the override effect doesn't seem to work.
      any input on this?
    cheers

    I tested the template number 13, or the nested row expansion template in ApShell. I added a dimension called Items, and added 11 members. When I opened the template and went to the control panel the dimension is not in the list, so I added the dimension name and then entered my override value memebr of "Item1".  The expansion had the correct data and worked.
    What did not happen, wa sthat the current view bar did not change, it still shows "All_Items" as its member.  This is correct, since the template does not control the current view bar.  If I change the current view to "ITEM2", I still only have values related to "ITEM1" in the expansion.  So, I am guessing that you expected the current view to change?  Which it will not.
    Just as a note for all who are interested, you may need to edit and add these dimensions in each wizard for each application and store them back to the repository for a complete wizard view.  In version 7, we expect to release EVDRE wizards. The NetWeaver version has them as part of its ApShell and they are transferable to the Microsoft version. 
    Hope this helps.

  • No Templates In My ENCORE Trial Version on Windows VISTA

    Hi,
    No Templates In My Encore Trial Version running on Windows VISTA. Is there a way I can get the templates online?
    All help is very appreciated!!!!
    Thanks in advance!

    [email protected] wrote:
    I got the Premeire CS4 trial version right off the adobe website. So I start going through Encore tutorials from Adobe and they have the templates but for some reason I don't. These are supposed to fully working 30 day trials.
    The fine print on the trials page indicates that licensing issues will cripple some functions in the trial versions.
    The Encore tutorials no doubt use the fully licensed version of the software.  Be aware that "fully working" does not mean the same thing as "includes additional content".  Templates definitely fall into the additonal content category as they have no effect on the actual workings of the program.  Adobe and other software companies often include extra content like templates as bonuses or goodies for the folks who purchase the software.
    -Jeff

  • How do I add extra pages to template documents in the new version of pages which carry over the same formatting, borders etc?

    Hi,
    Does anyone know how how to add extra pages to template documents in the new version of Pages which carry over the same formatting, borders, styles etc? In iWorks09, all styles, borders etc just used to carry over to the next page. In the new Pages, this doesn't seem to happen. Unless I'm missing something.
    Any help would be appreciated.

    Everything is a matter of degree! (Speaking for myself).
    Review and rate Pages 5 in the App Store and if you are interested check out all the changes here:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Peter

  • Cannot copy a section in new "Pages 5." Miss "dynamic templates."

    I loved being able to create a document with tables, graphics and other detailed material on a page that was its own "section." Then when I wanted to re-use it IN THAT SAME DOCUMENT, like an order form for example, I could copy it as many times as I liked in the same docuemnt, delete whatever parts were not needed in the copy and use it as a kind of "dynamic template."
    How do you copy a whole page all at once with complex content in the New pages?

    You can't really, other than to manually select all the content starting at the top of the page and paste elsewhere.
    Working with pages as pages has been abandoned in Pages.
    I'm sorry.

  • Cannot open a report I just saved via Save a Dynamic Template

    Hi All,
    I am on BPC 5.1 SP9, working in Office 2007.
    The problem is happen sporadically, where I save a report using Save a Dynamic Template.  Then try to open up the report I just saved, and the report does not open.  Sometimes if I resave the report via Save Dynamic Templates, I can reopen up the report.  If that does not work, I go back into Save Dynamic Template, and save it to a new name, and see if I can get the report to open.
    The strange thing is I can save the report to my desktop, then go into BPC.  Every time I open the report from my desktop it always runs.
    Not sure if anyone has seen this before?

    Does your template have an Excel 2007 4 digit extension? 
    There is a known issue with BPC 5.1 sp7 or higher service pack and Excel 2007 format extensions (SAP Note 1347243)
    Files with Excel 2007 Extension such as XLSX and XLTX, (saved and opened repeatedly via eTool -> Save / Open Dynamic Templates menu) may have issues where the template will not open.
    The problem does not exist with BPC 70M sp3 or higher. 
    The note also has a possible workaround; suggesting renaming the template on the File Share Server and then opening the re-named template via Open Dynamic Templates menu.
    Hope this helps.

  • Dynamic templates  tab

    Hi ,
    I am in BPC MS 7.0 with SP7 .
    While openning dynamic templates  tab  ...i am getting fallowing message ..
    "the discription information is missing , contact your administarator "
    I have admin access for BPC system and this error appear in only capex application , remanning applications ,  i am able to open dydnmic templalates.
    pls let me know any inputs ..
    Regards,
    PSR

    Hi ,
    I am using generic application and type is reporting .
    Recentely we upgraded SP2 to SP7 .
    But remanning applications are working fine .
    pls let me know any inputs ...
    Regards,
    PSR

  • Cannot load Dynamic templates in RATE Application

    I'm trying to create a new input schedule in RATE application.
    When trying to open a delivered dynamic template there are no templates to display.
    How can I reload or repair this issue? Have I missed something during installation or missed to activate something else
    Regards.
    Alberto

    Thank you for your answer!
    I checked the UJFS and in Rate App in my AppSet folder I do have 2 Templates, 2 images and the correspondent Description file for both templates.
    But still not able to select one of them form the BPC Excel interface.
    Is there something else to do or "reactivate"?
    Thanks

  • To disable Dynamic templates in OTL

    Hi,
    There are 3 dynamic templates available in OTL viz. Project Assignments, Work Schedule & Last Period Timecard.
    How can we disable these templates? I just need to use the Last Period Timecard, I want to disable the rest of the templates from the user.
    I am unable to deactivate these timecards from the lookup HXC_DYNAMIC_TEMPLATES as the fields are protected against update.
    Is there any other way? Please advise.
    Thanks

    I can suggest a number of options. But I have not tried this, so it may be that none of them give you what you want!
    You could make the 'last timecard' the default template by using the preference Self Service Default Template Assigned by Sys Admin. You could combine this with removing the tempate functionality (i.e. having the choice displayed to the user) byusing the preference I previously mentioned. This combination might give you the desired effect.
    Or, you could try setting the enabled flag to 'not enabled' on the lookup HXC DYNAMIC TEMPLATES. Although this is a 'system' lookup, you can update the flag from the 'back end'. I wouldn't recommend this as it wouldn't be supported, but it might be worth a try.
    Or, you could look into the ViewObject which controls the way the list of values for templates is displayed in the LDT file for the timecard. You m,ay be able to control which values are displayed by amending this VO.
    Let me know if any of these options work!
    Regards
    Tim

  • Dynamic templates return #RFR# data

    Hi Guys,
    I have a problem on OUTLOOKSOFT 5, SQL2005 where all the dynamic templates (including Any by Any) on the server return a #RFR# error when trying to retrieve data on all reports. I also tried retrieving data through EVDRE, but Outlooksoft still returns an "ERRORS FOUND RETRIEVING DATA".
    I can browse and process data on the cube successfully. I have processed all the dimensions and applications in Outlooksoft admin successfully...
    can anyone please help...
    krgds

    Hi guys thanks for the replies.
    Nish, I can view the data both in analysis services and sql fact tables, I have closed down excel and re-opened, expand and refresh. but still not difference.
    Ozguz, how r u doint there? u need to send me ur mail. anyway, the time dimension has the correct members typed correctly i.e. 2010.Apr... and so forth..
    I have noticed they have a member id "none". Is this a restricted member?
    rgds

  • Dynamic templates

    I would like to use Visio to create graphics templates - save as PDFs and use them in Illustrator for art assembly.
    Example; say a template for a #10 envelope - This template would be dynamic inthat it would be
    scalable to other envelope sizes like a #9, 6 3/4 and/or monarch simply by selecting either a row in Excel
    that is named as that envelope style or another method you may know of. This I call a dynamic graphics template.
    Rather that having a vast number of templates of varying configurations, window sizes and locations, flap sizes and styles
    and so on I would have one dtnamic template that would be the master and has new requests come along for newer styles
    I could simply ad this perameters to the spreadsheet and update it in Visio thus adding that new style to the master
    Vision Dynamic working template. I look forward to your reply

    Hi,
    According to your description, I suppose that you want to list template sizes in Excel, when clicking different sizes, Visio can create dynamic templates automatically. If so, it is not accessible to achieve this goal.
    It is alternative to create different sizes of templates and create hyperlinks in Excel. When clicking a row, it will skip to a Visio template.
    Could you share more information about it? Or you can post a screenshot and upload it to OneDrive.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • Source code for "Creating an Extended Web Dynpro Application"?

    Hello! I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some he

  • Why can I no longer stream music on my ipad/iphone?

    I own an IPhone 4s with 16GB of storage capacity and a recently purchased IPad mini 2 with 32gb of storage capacity.  I am operating off of ITunes IOS 8.1.2 for my iPhone and 8.1.1 on my iPad, As of last year I was able to import music into itunes, u

  • Receiving error while viewing details for a particular session in ODI console

    Found following error in logs [2015-04-08T16:50:43.546-05:00] [odi_server1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '20' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId

  • In table maintainance generator

    hi in table maintainance generator, how to validate the data entered in the table. If it is only with the events, how?

  • Why can't I favorite a two-page spread?

    I wanted to perform an Auto Layout with two page spreads as part of the mix but when I try to "favorite" one of them, the option is greyed out.  Is this happening to everyone?  Any thoughts?