Dynamic type conflict during the assignment of references. - Error while generating proxy in the backend
Hi All,
I get a short dump while generating a proxy in the backend.I give the package and the prefix and end up with a short dump.
Does any one know why this mught come up
"Dynamic type conflict during the assignment of references."
background: I imported a WSDl provided by legacy into PI and created service interfaces and then trying to generate a proxy class while i get this error.
Thanks.
Hi Shyamsundar,
I will explain a problem that I usually see in some developments:
XSD originally: XSD transformed:
Root -> Root
Tag 1 type int -> Tag 1 type int
Tag2 type string -> Tag2 type string
Tag3 type any - Tag3 type string
Normally the tag3 should have a XML inside. Then the ABAPers have to construct the tag3 with a CDATA structure (CDATA is used to put in an XML tag more XML tags inside like a text and no to be interpreted).
Later in SAP PI you can extract the cdata with an XSL, you can find some examples in the SCN.
I don’t like to convert the whole XML in only one string tag, because this makes difficult the develop for the ABAPers, although the work inside the PI is very easy because with an XSL you can extract the whole message easily. (You can find some examples in the SCN)
Regards.
Similar Messages
-
SWF error- while generating the flash files.
Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance. -
Error Dynamic type conflict when assigning references in EHP4
Hi Experts,
We are facing problem while customizing application wizard in EHP4.
Based on our requirement, we need to create one more tab named "Notes" to add instructions for applicants while applying for Job. It contains only instruction. To achieve this, we have done below set up.
1. We have created new WD component (WD window), OTR Alias
2. Created one more additional steps in T77RCF_RM_STEP called "Notes" and maintained step 1 information
3. In table T77RCF_RM_SEQ, under Application wizard (employee), we have added notes in sequence 1.
Now our new tab "Notes" is reflecting in application wizard. But while cliking on send application, we are getting error "The following error text was processed in the system GEG : Dynamic type conflict when assigning references".
Error Details:-
u2022 The following error text was processed in the system GEG : Dynamic type conflict when assigning references
u2022 The error occurred on the application server sapgeg_GEG_59 and in the work process 0 .
u2022 The termination type was: RABAX_STATE
u2022 The ABAP call stack was:
Can anybody guide what we are doing wrong?
It would be great help.
Regards,
purnimaHi Rajasekhar,
Facing the same issue, can you please let me know how you solved the above issue.
Best Regards,
Laxman -
Dump while testing Function- Dynamic type conflict when assigning reference
Hi Gurus,
I have the following checked and activated-
- Function with 1 Ruleset
- The Ruleset containing couple of DBlookup expressions
- Value range
- Decision Table
- Decision tree,
- Procedure call
After I give test data while Simulating the function, I get this dump-
Short text
Dynamic type conflict when assigning references
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_FDT_DB_LOOKUP==============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Have I missed something? We are on SAPKA70207.Hi Carsten,
I couldn't find an OSS note featuring-
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
"CL_FDT_DB_LOOKUP==============CP" or "CL_FDT_DB_LOOKUP==============CM01K"
"BUILD_WHERE_CLAUSE_LIMIT"
Raised OSS note. -
RFx Q&A dump SRM 7- Dynamic type conflict when assigning references Q&A
Hello,
We are on SRM 7.0 SP05. When adding a question via the Q&A 'chat' functionality on a published RFx the EP shows the following error: 'Dynamic type conflict when assigning references Q&A'.
Could somebody test if this issue is also occuring on their system?
Anybody has a clue what's causing this?
Kind regards,
TimHello Jay,
Loggings show the following:
15:18:49 DIA 000 100 NLPURCOR AB 0 Run-time error "MOVE_CAST_ERROR" occurred
15:18:50 DIA 000 100 NLPURCOR AB 1 > Short dump "100324 151849 dmzsv719 b_SRM_00 " generated -
SC BRF WF Dynamic type conflict when assigning references
I have activated the process controlled workflow framework and
activated the SAP provided SC BC set. When I try to create shoppping
cart(while save or check) I get the following short dump.
The URL
https://usil0c20.ca.com:8343/sap/bc/webdynpro/sapsrm/wda_l_fpm_gaf was
not called due to an error.
Note
The following error text was processed in the system CS2 : Dynamic type
conflict when assigning references
The error occurred on the application server usil0c20_CS2_00 and in the
work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: INIT_BRF_TRACE of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: CONSTRUCTOR of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: INITIALIZE_BRF_MSG of program /SAPSRM/CL_WF_BRF_MSG=========CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of
program /SAPSRM/CL_WF_BRF_CONNECTOR===CP
Method: /SAPSRM/IF_WF_RULE_CONNECTOR~EVALUATE of
program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_SCHEME of program /SAPSRM/CL_WF_SCHEME_PROVIDER=CP
Method: GET_PROCESS_SCHEME of program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_LEVEL_SEQUENCE of
program /SAPSRM/CL_WF_CONFIGURATION===CP
Method: CREATE_PROCESS_INSTANCE of
program /SAPSRM/CL_WF_PROCESS_MANAGER=CP
Method: CREATE_PROCESS_FORECAST of
program /SAPSRM/CL_WF_APV_FACADE======CHi,
The dump either happens because the BRF Object SRM_WF is missing in the system or
in the object SRM_WF at BRF the correct trace class /SAPSRM/CL_WF_BRF_TRACE is not used on it.
thus please check.
Thanks,
Melina -
ErroruFF1A Dynamic type conflict when assigning references
hi all,
I have one node ,name is :forloop
under this node ,there is a attribute ,its type is string ,its name is attf
now ,I write code as below in action,but it show a error" Dynamic type conflict when assigning references "
someone can tell me the reason?thanks
data :
for_loop type ref to if_wd_context_node,
t_var type standard table of string.
append 'a' to t_var.
append 'b' to t_var.
append 'c' to t_var.
for_loop = wd_context->get_child_node( name = wd_this->wdctx_forloop ).
for_loop->bind_elements( t_var ).
thanksHi,
The problem is the internal table you are using is not match with the attribute u created.
Node name : forloop
Cardinality : 0-n.
selection : 0-1
attr name : attf
Use the below code.
DATA forloop TYPE REF TO if_wd_context_node.
DATA t_var TYPE table of wd_this->element_forloop.
data : wa_tar like line of t_var.
wa_tar-attf = 'a'.
append wa_tar to t_var.
wa_tar-attf = 'b'.
append wa_tar to t_var.
wa_tar-attf = 'c'.
append wa_tar to t_var.
navigate from <CONTEXT> to <FORLOOP> via lead selection*
forloop = wd_context->get_child_node( name = wd_this->wdctx_forloop ).
forloop->bind_elements( EXPORTING
new_items = t_var
Regards.
Ragu.
Edited by: Ragu Prasad on Feb 6, 2009 10:39 AM -
Dynamic type conflict when assigning references - Dump
Hi All,
I am getting the dump "Dynamic type conflict when assigning references". In my application I have used a table control inside which I have input field, text view and text edit.
I guess the text edit is creating the issue. The error analysis report is below :
If anyone have any idea about the issue, please help.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_MOVE_CAST_ERROR', was not
caught in
procedure "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT" "(METHOD)", nor was it
propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
It was tried to assign a reference to a rereference variable using the
'CAST' operation ('?=' or 'MOVE ?TO').
However, the current content of the source variable does not fit into
the target variable.
source type: "\CLASS-POOL=/1WDA/L0STANDARD\CLASS=CL_TEXT_EDIT"
target type: "\INTERFACE=/1WDA/VTABLE_CELL_EDITOR"
Information on where terminated
Termination occurred in the ABAP program "/1WDA/L3STANDARD==============CP" -
in "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 2290
of the (Include) program "/1WDA/L3STANDARD==============CCIMP".
The termination is caused because exception "CX_SY_MOVE_CAST_ERROR" occurred in
procedure "IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT" "(METHOD)", but it was
neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "/1WDA/L3STANDARD==============CP "; its source
code begins in line
2034 of the (Include program "/1WDA/L3STANDARD==============CCIMP ".
2265 if va__CONTENT_READONLY is bound and
2266 va__CONTENT_READONLY->IFUR_NW5__CONTROL~_IID <> ifur_nw5_invisible=>_iid_invisible.
2267 IFUR_NW5_SAPTABLECELL~HASCONTENT = abap_true.
2268 else.
2269 IFUR_NW5_SAPTABLECELL~HASCONTENT = abap_false.
2270 endif.
2271 endif.
2272
2273 * >> ProvideCONTENT
2274
2275 IF mv_CONTENT_READONLY <> va__CONTENT_READONLY.
2276 finalize_adapter( mv_CONTENT_READONLY ).
2277 mv_CONTENT_READONLY ?= va__CONTENT_READONLY.
2278 ENDIF.
2279
2280 * >> property-Aggregation mv_CONTENT_EDITABLE
2281 DATA va__CONTENT_EDITABLE TYPE REF TO /1WDA/VTABLE_CELL_EDITOR. "#EC NEEDED
2282 * >> UCA STANDARD|TABLE_CELL|CONTENT_EDITABLE
2283 data adp_uielement type ref to /1WDA/VUIELEMENT. "#EC NEEDED
2284 if mv_CONTENT_READONLY is not bound and
2285 mv_WD_TABLE_CELL_EDITOR is bound.
2286 va__CONTENT_EDITABLE ?= mv_CONTENT_EDITABLE.
2287 IF va__CONTENT_EDITABLE is bound and va__CONTENT_EDITABLE->m_view_element = mv_WD_TABLE_
2288 ELSE.
2289
>>>>> va__CONTENT_EDITABLE ?= create_by_view_element(
2291 view_element = mv_WD_TABLE_CELL_EDITOR
2292 parent = me
2293 ).Hi Everyone,
Thanks for your replies.
We raised an OSS call for the same and got the below response.
Dear Customer,
I've analized your actual problem and found out that you are using a notallowed combination of text edit as cell editor within table for
clasical Web Dynpro ABAP rendering. The text edit as cell editor work in701 releases when the lightspeed rendering is enabled. However in case
that you want to used
lightspeed rendering, I would suggest to upgrade on a higher
SP level than SP4 as for technical reason we can only deliver
corrections for Unified Rendering first from SP04. -
Type conflict during dynamic method call.
While executing the following program I get the error "Type conflict during dynamic method call.":
DATA: container_r TYPE REF TO object,
grid_r TYPE REF TO object,
itab_saplane TYPE TABLE OF saplane.
* IMPORTANT NOTE: class names must be in UPPER CASE
DATA: str_cnt TYPE seoclsname VALUE 'CL_GUI_CUSTOM_CONTAINER',
str_gui TYPE seoclsname VALUE 'CL_GUI_ALV_GRID',
meth_name TYPE STRING VALUE 'SET_TABLE_FOR_FIRST_DISPLAY'.
TYPE-POOLS abap.
DATA: ptab TYPE abap_parmbind_tab,
wa_ptab LIKE LINE OF ptab,
ref TYPE REF TO data.
CREATE OBJECT container_r TYPE (str_cnt)
EXPORTING container_name = 'CUSTOM_CONTROL1'. " Name of the custom control area (UC!)
* Construct parameter itab
GET REFERENCE OF container_r INTO ref.
wa_ptab-name = 'I_PARENT'. " Must be upper-case
wa_ptab-value = ref.
INSERT wa_ptab INTO TABLE ptab.
* EXPORTING i_parent = container_r.
CREATE OBJECT grid_r TYPE (str_gui)
PARAMETER-TABLE ptab.
SELECT * FROM saplane INTO CORRESPONDING FIELDS OF TABLE itab_saplane.
* Cannot call set_table_for_first_display directly...
CALL METHOD grid_r->(meth_name)
EXPORTING I_STRUCTURE_NAME = 'SAPLANE' " Type of the rows in the internal table (UC!)
CHANGING IT_OUTTAB = itab_saplane. " The internal table itself
CALL SCREEN 100.
Any help would be appreciated!Hi ...
Apologies ... for confusion ... actually both are required ...
the type 'E' as well as CL_GUI_CONTAINER.
The below code worked for me ...
check out how I cast it to the parent class type ...
DATA : lv_container TYPE seoclsname VALUE 'CL_GUI_CUSTOM_CONTAINER',
lv_control TYPE seoclsname VALUE 'CL_GUI_ALV_GRID',
lv_method TYPE string VALUE 'SET_TABLE_FOR_FIRST_DISPLAY',
lt_par_tab TYPE abap_parmbind_tab,
ls_param LIKE LINE OF lt_par_tab,
lref_cont TYPE REF TO cl_gui_container,
lv_data TYPE REF TO data.
CREATE OBJECT lref_container
TYPE
(lv_container)
EXPORTING
container_name = 'ALV_AREA'.
ls_param-name = 'I_PARENT'.
ls_param-kind = 'E'.
lref_cont ?= lref_container.
GET REFERENCE OF lref_cont INTO lv_data.
ls_param-value = lv_data.
INSERT ls_param INTO TABLE lt_par_tab.
** Now create ALV Control.
CREATE OBJECT lref_alv_ctrl
TYPE
(lv_control)
PARAMETER-TABLE
lt_par_tab.
** Set table for 1st display
DATA : lv.
lv = lref_alv_ctrl->mc_fc_print.
CALL METHOD lref_alv_ctrl->(lv_method)
EXPORTING
i_structure_name = 'T001'
CHANGING
it_outtab = lt_company.
Cheers
Edited by: Varun Verma on Aug 12, 2008 4:19 PM -
I have a context node called ERROR_MESSAGE, with a single attribute
called MSG of type BAPI_MSG.
I encounter an error stating "Dynamic type conflict when assigning references" at the
following point in my code:
lo_nd_error_message->bind_elements( error_msgs )
error_msgs is defined as follows:
Data: error_messages type standard table of bapi_msg.What is the Cardinality of your context node ERROR_MESSAGE? Make sure that it is 0...n or 1...n.
-
Error while generating / deleting the extension
Hi experts,
I have created a project and extension through EEWB. While generating the extension by right clicking on the extension, i am getting short dump saying that Type conflict occured while calling the FM 'RSA1_SINGLE_OLTPSOURCE_GET'.
We have both SCM 7.0 ( Development box) and SCM 5.0 (sandbox) systems in our project. I have created project and extension in sandbox, it worked and it is giving dump in scm 7.0.
Please clarify me why this is happening and provide solution to this issue.
Thanks
GopalHi venkat,
I think the problem is occuring due to type conflict. i have gone through your function module and i got the following may be cause of your type mismatch.
I_WITH_BUF- Read with use of the buffer (Mazen op) - this should be type c
I_OLTPSOURCE-Name of the DataSource - this should be char 30.
I_OBJVERS- Object version of the DataSource- this should be char 1 type
I_RLOGSYS-Name of the receiving system -this should be char 10 type
I_T_LANGU-Languages for the texts should be read -this should be lang 1 type
I_NO_TEXT-No return of texts -this should be type c
I_LEANMODE-Use buffered DDIC information -this should be type c
I_NEW_HANDLE-New fields of the DDIC treat -this should be type c
I_GET_SWITCH-Switch to read-this should be type c
Hope it will useful.
thanks
Hemant -
" Can not interpret the data in file " error while uploading the data in DB
Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PMDear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
wa LIKE LINE OF itab,
wa1 like line of itab.
variable declaration
DATA: v_excel_string(2000) TYPE c,
v_file LIKE v_excel_string VALUE 'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
delimiter TYPE c VALUE ' '. " delimiter with default value space
read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
WHILE ( sy-subrc EQ 0 ).
READ DATASET v_file INTO wa.
IF NOT wa IS INITIAL.
append wa TO itab.
ENDIF.
CLEAR wa.
ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab. -
Error While updating info in the People Form-Additional Personla Details
Hi All,
Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
Error Like:
APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure per_htrca_merge_tca_person at step10.
Please contact your support represntative.
Thanks -
SowmyaThanks you,
By this Note id:395136.1
Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
with this Note id:278422.1
We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
we are using applications 11i.
please help to find this Profile option.
But with this note id:ID 395136.1
This is Working.
Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
Thanks for the Support-
Sowmya.
Edited by: user13419037 on Aug 11, 2011 11:53 PM
Edited by: user13419037 on Aug 12, 2011 12:03 AM
Edited by: user13419037 on Aug 12, 2011 3:45 AM -
Error while generating the Infoset
Dear SD Experts,
I get the Error While Generating the Infoset.
I am actually trying to write a Query.
the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
below is the List.
1)Differences in field TEXT_VBAP_CHARG
2)Differences in field TEXT_VBEP_ETENR
3)Differences in field TEXT_VBEP_ETENE
4)Differences in field TEXT_VBEP_PLNUM
5)Differences in field TEXT_LIPS_CHARG
6)Differences in field TEXT_LIPS_LGPLA
Thanks in Advance.
Regards,
Santa Khattri.Hi ,
From what you are saying, i am guessing there could be difference in field types used and in dictionary.
Try this.
1.Go to SQ02
2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
3. Select your Infoset.
4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
or Try this.
1. Select your infoset.
2. Change
3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
Thank you.
Regards,
Subin John. -
The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.
Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check.
Maybe you are looking for
-
Cucm 8.6 to 9.1 elm
Hello Guys, We are moving from 8.6 to 9.1 in a day and we have 750 Unified Workspace licensing. and 6015 DLU's. I see a total of 6765 units of licenses on the license report. How does this convert to 9.1 user based scheme. Is there a converting ratio
-
DI: Problem with Serials on (AR) Return
Hi, I've got a really simple piece of code, which is working fine for Goods Receipts (AP) but not for Returns (AR). I'm able to create a Return manually without problems, but the code doesn't seem to work: I get Return created, but then when I try to
-
KF creation - Non-cumulative value with NCUM value change - option
What is the use above option in the KF creation? Thanks
-
Speed up load to ftp server in window server 2008 slow
Dear all. I have configure FTP in window server 2008 (IIS 7.5...), when I test in LAN speed upload to ftp server is slow ( 60-80 KB/S). Please help me fix it. Thanks so much
-
Hello Pls tell me the difference between J1IH AND J1IS. In which case i sould these tcodes. Can i use J1IH for canceling vendor excise invoice, the one I captured in J1IEX? pls suggest.