Dynamically Changing Approvers in Vacancy Creation

Hi all,
I have configured the AME while creating the Vacancy. Is it possible to change the list of approvers in that transaction once that transaction is submitted for approval?
Consider this scenario. In review page the list of approvers are shown as :
1.Approver A
2.Approver B
3.Approver C
Now with this list it is submitted for approval.
Now when Approver A approves and goes to approval for approver B, a custom region will be present in the notification he receives wherein he can enter/modify some data. Is it possible to change the approval list based on the input of approver B.
Thanks and Regards,
Pradeep

Hi Pradeep,
Try using the "Reassign" functionality which is available as standard using which a respective approver can transfer the approval notification to any other person in the Organization.
Thanks,
Sanjay

Similar Messages

Best Practice: Dynamically changing Item-Level permissions?

Hi all,
Can you share your opinion on the best practice for Dynamically changing item permissions?
For example, given this scenario:
Item Creator can create an initial item.
After item creator creates, the item becomes read-only for him. Other users can create, but they can only see their own entries (Created by).
At any point in time, other users can be given Read access (or any other access) by an Administrator to a specific item.
The item is then given edit permission to a Reviewer and Approver. Reviewers can only edit, and Approvers can only approve.
After the item has been reviewed, the item becomes read-only to everyone.
I read that there is only a specific number of unique permissions for a List / Library before performance issues start to set in. Given the requirements above, it looks like item-level permission is unavoidable.
Do you have certain ideas how best to go with this?
Thank you!

Hi,
According to your post, my understanding is that you wanted to change item level permission.
There is no out of the box way to accomplish this with SharePoint.
You can create a custom permission level using Visual Studio to allow users to add & view items, but not edit permission.
Then create a group with the custom permission level. The users in this group would have the permission of create & add permission, but they could no edit the item.
In the CodePlex, there is a custom workflow activities, but by default it only have four permission level:
Full Control , Design ,Contribute and Read.
You should also customize some permission levels for your scenario.
What’s more, when use the SharePoint 2013 designer, you should only use the 2010 platform to create the workflow using this activities,
https://spdactivities.codeplex.com/wikipage?title=Grant%20Permission%20on%20Item
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How can I dynamically change a Grids ro color

Hi,
I am using a grid within a component in my Flex application.
I have an XML dataProvider, and I want to change the row
colour of my Grid depending on a value coming form my dataProvider
– but I cant seem to get this to work :(
can anyone help / advise me on how I can dynamically change the
colour of my grid row depending on a value coming from my XML
DataProvider????
For example:
Within my component I have the following grid within an
“MXML” component called myGrid.mxml:
[CODE]<mx:Grid id="GGrid">
<mx:GridRow backgroundColor="0xCFD8DA">
<mx:GridItem>
<mx:Label id=”name_lbl”/>
</mx:GridItem>
</mx:GridRow>
<mx:GridRow backgroundColor="0xCFD8DA">
<mx:GridItem>
<mx:Label id=”expiryDate_lbl”/>
</mx:GridItem>
</mx:GridRow>
<mx:GridRow id=”statusRow”>
<mx:GridItem>
<mx:Label id=”status_lbl”/>
</mx:GridItem>
</mx:GridRow>
</mx:Grid>[/CODE]
I am setting/declaring my results/variables form my
dataProvider in the main Application (“MXML”) file:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:mx="
http://www.adobe.com/2006/mxml"
xmlns="*"
creationComplete="initApp()" >
<mx:HTTPService
id="myResults"
url="
http://localhost/myResults.xml"
resultFormat="e4x"
result="myResultHandler(event)" />
[CODE]<mx:Script>
<![CDATA[
import mx.core.Application;
[Bindable]
public var myDataFeed:XML;
public function initApp():void
myResults.send();
public function myResultHandler(event:ResultEvent):void
myDataFeed = event.result as XML;
Application.application.myGrid.name_lbl.text =
myDataFeed.name;
Application.application.myGrid.expiryDate_lbl =
myDataFeed.expiry;
Application.application.myGrid.status_lbl.text =
myDataFeed.status;
if(myDataFeed.status == “OK”)
Application.application.statusRow.backgroundColor="0xCFD8DA";
else if (myDataFeed.status == “WARNING”)
Application.application.statusRow.backgroundColor="0xFF9900";
else if (myDataFeed.status == “CRITICAL”)
Application.application.statusRow.backgroundColor="0xFF0000";
]]>
</mx:Script>
</mx:Application>[/CODE]
however, I cannot access the property
“backgroundColor” of the gridRow in this way:
[CODE]Application.application.statusRow.backgroundColor[/CODE]
As I get the following error:
[CODE]Severity and Description Path Resource Location
Creation Time
Id 1119:
Access of possibly undefined property backgroundColor through
a reference with static type mx.containers:GridRow.
enterpriseDB_new enterpriseDB_new.mxml
line 721 1194443056449 19295[/CODE]
can anyone help / advise me on how I can dynamically change the
colour of my grid row depending on a value coming from my XML
DataProvider????
Thanks,
Jon.

quote:
Originally posted by:
ljonny18
Hi,
I am using a grid within a component in my Flex application.
I have an XML dataProvider, and I want to change the row
colour of my Grid depending on a value coming form my dataProvider
– but I cant seem to get this to work :(
can anyone help / advise me on how I can dynamically change the
colour of my grid row depending on a value coming from my XML
DataProvider????
Thanks,
Jon.
Hi,
a few hours ago I stumbled across this cookbook entry - it
didn't solve MY problem, but maybe it provides a way to solve your
problem?
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=61&product Id=2&loc=en_US
From the article:
quote:
Changing the background color of a DataGrid cell is not as
simple as changing some style because the default renderer for a
DataGrid cell does not have a backgroundColor. Therefore, to do
this simple task, you have to create a custom itemRenderer where
you draw your own background in the updateDisplayList function.
HTH
Uwe

Dynamically changing Restricted List

Hi,
We have a requirment,
Two team IT and HR are there. Each has it's own set of Reviewers and Approvers.
We have created a custom profile form where we have a metadata field for reviewers and approvers.
Based on user role, i am able to set up default values of Reviewer and Approver. This is fine. But IT team has two reviewers and i need to display as them drop down list.
Using Restricted list i can give the values, but i dont have the option to filter out reviewers based on role in restricted list.
Can someone guide me in how to dynamically change the restricted values in UCM.
Regards,
Boopathy

not sure about dynamic restricted list in rules but you can achieve your requirent in many ways...
for description lets assume
2 roles IT and HR
2 metadata xApprover and xReviewer
Option1:_
create 2 new rules
1) ruleIT
- add xReviewer and xApprover fields and set the restricted list for IT team.
- In General Tab, check the "User rule activation condition" and in custom tab use the following code
((userHasRole("IT"))2) ruleHR
- add fields and define restricted list ...go to custom tab and add
((userHasRole("HR"))finally, add the above rules to yoru profile.
Option2:_
another option ...
define idoc include as
<@dynamichtml myCustomInclude@>
<$if not isUploadFieldScript$>
     <$if userHasRole("HR")$>
          <select name="xApprover">
          <option value="Ap1">Ap1</option>
          </select>
          <select name="xReviewer">
          <option value="Re1">Re1</option>
          </select>
     <$elseif userHasRole("IT")$>
     <$endif$>
<$endif$>
<@end@>Go to your Profile Rule and Edit the fields(xApprover,xReviewer)
...in "Edit Rule Field xApprover" window, select "Use custom include" and enter the above include name "myCustomInclude"
if you need any field validation, put it in else block of isUploadFieldScript
Edited by: Bunty on Apr 3, 2013 11:32 AM

Merging of 2 Cells in WD ABAP ALV Header & Dynamically change the header

Hello Experts,
I have two main requirements with respect to WD ABAP - ALV report creation
1) Two feilds in the header of ALV GRID created in the WD ABAP screen must be merged as shown below(Month Column) ,
| January | February |
| Col 1 | Col2 | Col 1 | Col2 |
2) The header value(Month) should dynamically change based on the current date.
For Eg: If June 2011 is the current month , the ALV table should start from June 2011 and displayed till May 2012.
Looking forward for your valuable inputs @ the earliest
Regards,
Sriram

Hi Sriram,
For merging..
Pleaese go through this
Merge of Cells in ALV table in ABAP webdynpro.
ABAP WD: ALV merge cells
For Header Change..
How to set title/text for ALV table column header in WD ABAP
Change column header in ALV to another DDIC Element type
Change label of a column in ALV
Cheers,
Kris.

Alignment of dynamically changing StaticText element

Having a little trouble centering a dynamically changing StaticText element whose parent container has its alignChildren property set to 'center'. As the text of the element changes, new strings that are assigned to it are truncated to the length of the string the element initially held. If I initially place a string of blank characters that is longer in length than any anticiapted text string the element will ever hold, when the text is updated it is offeset to the left by the number of characters of the initial string that are in excess of the length of the string newly assigned to it. Any ideas or suggestions would be very much appreciated.

Set the initial size of the StaticText with the "characters" property, which will reserve width so it is the proper width.
Also set "justify" to "center" so that it will always be centered within that space.
Note that "characters" is an initial creation property only, and cannot be set after the object has been created.

How to dynamically change the text of a TextObject with embedded DataField?

Hi
I'm trying to dynamically change the text of a TextObject at runtime, by using the .NET library. My problem is that if one or more DatabaseFieldDefinition is embedded inside my text, I'm unable to change the "static text" only, by keeping the field, e.g. I have :
Text1 => "Contact Name: {Contact.Name}"
and I'd like to change it to anything else like:
Text1 => "Nom du Contact: {Contact.Name}"
Half of my TextObject is static text while second part comes from the dataset.
(of course the translation is dynamic - it is called at run-time and the new value to be set depends on the calling application language)
If I simply modify the Text property of my TextObject, the {Contact.Name} embedded field is not evaluated anymore by the Crystal Engine, but considered as a single text.
Using formulas or parameters looks quite difficult, because it means having many ones just for translation needs - I cannot control the way my users will create their reports and "force them" to use complex methods just in order to put a text and a value together...
Anyone knows how to deal with that ?

Only way I can think of doing this:
1) Create a formula (call it lang) and enter the string "Contact Name" in it
2) Place the {Contact.Name} field next to the string
3) So now you have:
ContactName: {Contact.Name}
4) Check what localization you are after. If you need "Nom du Contact", change the lang formula so it shows "Nom du Contact" using the code below:
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
I realize this may not give you consistent spacing as the translations may have strings of differnt length. Perhaps someone has other idea(s)...

Dynamically change the Binding of a view object

I want to reuse a panel several times in my application. The VO has one bind parameter (:1). The same panel should be reused several times with different bind variables.
I found a technical note concerning this issue called: How to Dynamically Change the binding of a View Object to a JClient Panel. This works for JDeveloper 9i but not for JDeveloper 19g. Does anybody know how to dynamically change the binding in JDeveloper 10g

You may use bindRowSetIterator() and pass in a custom fetched ViewObject or a RowSetIterator to the iterator binding that is displayed in your panel.

Dynamically changing internal table in 'gui_download'

Hi Experts,
                 i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................

Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
              <dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
      lv_months TYPE i,
      lv_date TYPE sy-datum,
      p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis   = lv_date
      i_datum_von   = sy-datum
      i_kz_incl_bis = ' '
    IMPORTING
      e_monate      = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
    WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM.                    "f_fcat
*&      Form build_dyn_itab
      text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM.                    "build_dyn_itab
Thanks,
Rajesh.

Dynamically change the Priority Group of Logical Table Sources in OBIEE 11g

Hi All,
I have 2 Logical Table Sources(LTS 1 and LTS 2 for a Logical Table in BMM Layer).
Example: Logical Table : Sample
LTS Source 1 : Sample 1(Priority Group Set to 1)
LTS Source 2 : Sample 2(Priority Group Set to 0)
I have set the Priority Group of Sample 1 LTS Source to 1 and Priority Group of Sample 2 LTS Source to 0.
I need to dynamically change the Priority Group of Sample 1 LTS Source to 0 if my role is DEVELOPER where role is a column in database.
If my role is not equal to DEVELOPER then the Priority Group of Sample 1 LTS Source will remain same(1).
Please suggest how can i achieve this.
Thanks,
Soukath Ali

hello Soukath Ali,
didi you find a way to dinamically changing Priority Group?
thanks,
Maria Teresa Marchetti

Dynamically Changing Labels for Multi Row Block Buttons

Forms [32 Bit] Version 9.0.4.1.0 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
On my local: Windows 7 OS
I am having a difficult time in doing the following in forms, and not sure if it can be done?
I have a multi row block,based on DB table, which displays filename and another column from the table.
It also has a push button on each row, which opens and displays the physical file from its source, when clicked. The filename thus can have 3 diff statuses depending on its sources and accordingly corresponding button should display appropriate label:
a) View Image (its is in content server and successfully imaged. In this case I display the file in the browser, from the content server, when the button is clicked)
b) View File (Display the file from file system)
c) View Error (Display imaging error message from the table, as file failed to make it to the imaging server)
I have this logic currently coded in the post query trigger, at the block level, and tried using set_item_property(button_id, label, <button_lable>), where I programmatically set the button lable, based on the file status (imaged, not imaged or has error) in that row. This wroks well, only if all the files in the multi row block have the same status. If each of them have diff statuses, then only last processed files's status gets reflected into the button label. For eg: The file in the first row of the block is imaged, and one in the second row has an imaging error. The button label for the first row should say 'View Image' and button for the second row should say 'View Error'. But now buttons for both the rows display 'View Error', as thats what got processed last!
I __can not use set_item_instance property for 'label'__ (which lets us dynamically change the label on the push buttons).
Is there any way to do this for ORacle forms? I am now playing with having 3 diff button items in that block, laying them on top of each other and showing only those that are appropriate and hiding the others... But I am not sure it is going to give me what I need? I think I am going to end up facing the same issues as in above case!!
Any expert advice is highly appreciated.
Thanks in advance for your time:
Libran_Girl
Edited by: libran on Aug 30, 2011 8:04 AM
Edited by: libran on Aug 30, 2011 8:05 AM

<p>I have just updated this existing PJC, that was originally constructed to handle Text Fields. You can, now, also handle buttons with it.
Set the Button's Implementation Class property to : oracle.forms.fd.MultiButton.
</p>
This is the code you have to put one triggers of your based block:
When-New-Record-Instance trigger: (based on the EMP table)
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;When-Create-Record trigger:
declare
     LN$N    pls_integer ;
     LN$Rec pls_integer := :system.cursor_record ;
     LC$C    Varchar2(15) ;
Begin
     if get_block_property('EMP',TOP_RECORD) > 1 Then
          LN$n := :system.cursor_record - get_block_property('EMP',TOP_RECORD) + 1 ;
     else
          LN$N := :system.cursor_record ;
     end if;
     If LN$N > 0 Then
          Set_Custom_Property('EMP.BT', LN$n, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$n, 'SET_NEW_REC', to_char(LN$Rec) );
     End if ;
end;Post-Query trigger:
declare
     LN$Pos pls_integer ;
     LN$Rec pls_integer := Get_Block_Property('EMP', CURRENT_RECORD) ;
     LN$Max pls_integer := Get_Block_Property('EMP', RECORDS_DISPLAYED) ;
     LC$C    Varchar2(15) ;
Begin
     LN$Pos := LN$Rec - (trunc(LN$Rec/LN$Max) * LN$Max) ;
     If LN$Pos = 0 Then LN$Pos := LN$Max ; End if ;
     If LN$Pos > 0 Then
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LOG', 'true' );
          -- Add the new item --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_NEW_REC', to_char(LN$Rec) );
          -- Set some properties --
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_LABEL', to_char(LN$Rec) || ',' || :EMP.ENAME );
          If :EMP.JOB = 'MANAGER' Then
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FONT', to_char(LN$Rec) || ',Arial,bold,14' );
            Set_Custom_Property('EMP.BT', LN$Pos, 'SET_FGCOLOR', to_char(LN$Rec) || ',0,0,255' );
          End if ;
          If :GLOBAL.I > 250 Then :GLOBAL.I := 5 ;
          Else :GLOBAL.I := :GLOBAL.I + 5 ;
          End if ;
          LC$C := To_Char(LN$Rec) || ','
               || To_Char(255) || ','
               || To_Char(255-:GLOBAL.I) || ','
               || To_Char(255-:GLOBAL.I) ;
          Set_Custom_Property('EMP.BT', LN$Pos, 'SET_BGCOLOR', LC$C );
          Synchronize;
     End if ;
end;Don't forget to copy the multirecord.jar file in your /forms/java folder, then add it to the archive and archive_jini tags of your /forms/server/formsweb.cfg file.
Enjoy it,
Francois

Dynamically change the db and server in execute sql task

Pkg 2: Moves data from B_STG (Staging DB) to B_Det_STG (Staging DB) ---- option1
Pkg 3: Moves data from B_STG (Staging DB) to B_Det (PC DB) ---- option2
This part is duplicating in both the packages
So they want me to merge both of them into in execute sql task and dynamically change between option1 and option2 depending on a pkg level variable.
So, I create a pkg level variable called ExecutionVariable: 'ANALYSIS' or 'LOADING'
If 'ANALYSIS' it needs to do option1 else option2.
So, I ma trying to create a dynamic connection string in execute sql task.
I change the connection property in execute sql task editor dynamically my giving the expression: @[User::ExecutionVariable] == "ANALYSIS"? @[User::STAGINGDBConnectionString] : @[User::PCDBConnectionString]
which evaluates to : Data Source=AW-ETL-D1;Initial Catalog=Staging;Integrated Security=SSPI;Provider=sqloledb
But when I run the sql task, its giving me an error:
ERROR:
TITLE: Microsoft Visual Studio
Nonfatal errors occurred while saving the package:
Error at PC_DataLoad: The connection "Data Source=AW-ETL-D1;Initial Catalog=Staging;Integrated Security=SSPI;Provider=sqloledb" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PC_DataLoad: The connection "Data Source=AW-ETL-D1;Initial Catalog=Staging;Integrated Security=SSPI;Provider=sqloledb" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Can u please help me.

Hi ,
Don't try to make the "Execute Sql" task as dynamic.
Try to make OLEDB connection Manager as "Dynamic".
Steps:
1. Create OLE DB Connection pointing to any database then set expression to connection string variables like below.
Provider=SQLNCLI10.1;Integrated Security=SSPI;Initial Catalog=YourDBname;Data Source=YourServerName.
2. Make Delayed Validation property to "True".
3. Set the created dynamic OLE DB connection to your Execute SQL task.
4. Change the connection string variable accordingly before running the "Execute SQL" task.
Hope it will help you.
Regards,
Nandhu

Dynamically changing the name of the .dll file to load in call Library

Our current model is to use dll files as "plug-in" modules for instruments and a top layer test step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as a parameter so the kenmore.dll file is loaded, the functions are registered and the functions are called. Next the TestStep is called with whirlpool.dll as a parameter now the whirlpool.dll is loaded the functions are registered and the functions are called. This works very well in our current CVI/LabWindows environment. Now we plan to work with LabView, we wish to retain this model (as DLL files, there are advantages in our model for us). We have not found a way to load these dll files from LabView without hard coding the path and filenames in.
Any suggestions on how to dynamically change the path in the Call Library module, or another suggested method of loading the dll via LabView?
Thanks,

John Stuart wrote:
Our current model is to
use dll files as "plug-in" modules for instruments and a top layer test
step calls the appropriate driver dll.
For instance
the TestStep is called with the kenmore.dll passed as
a parameter so the kenmore.dll file is loaded, the functions are
registered and the functions are called. Next the TestStep is
called with whirlpool.dll as a parameter now the whirlpool.dll is
loaded the functions are registered and the functions are called.
This works very well in our current CVI/LabWindows environment.
Now we plan to work with LabView, we wish to retain this model (as DLL
files, there are advantages in our model for us). We have not
found a way to load these dll files from LabView without hard coding
the path and filenames in.
Any suggestions on how to dynamically change the path in the Call
Library module, or another suggested method of loading the dll via
LabView?
Thanks,
As Ben has pointed out LabVIEW
scripting may be a possibility but you are going with that in highly
unsupported area. Also I happen to know that changing the library name
of a Call Library Node through scripting has produced unsupported
feature errors previous to LabVIEW 7.1 eventhough the method was there.
And LabVIEW 8 hides the whole scripting business behind the license
manager.
Another approach at least if the different DLLs do not change to often
thier functions and parameters would be to create a wrapper DLL. Have
it a method that loads the desired DLL and links its functions to
internal function pointers. Then when calling the actual function entry
points just redirect directly to the correct fucntion through that
function pointer. Since you are already working in CVI creating such a
DLL should be only a matter of taking out a little bit of your already
existing code and put it into a DLL project.
Rolf Kalbermatter
Message Edited by rolfk on 04-12-2006 07:40 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Dynamically changing the flatfile name..

Hi friends,
I 'm Getting data from 30 Flat files...all are with same structure but different data.. .. all these files are now in Application server...
now i want to upload data into with a single DataSource and to ODS with process chains..
so, how can i dynamically change the file name in Data Source level.. i saw previous threads.. in that.. through Routines.. we can solve this problem.. but I dont know ABAP code... so, can any one plz give me the exact code.. what i have to write...exact coding..
<b>
       I already post this question in forums.... but evry one gave different options.. some one gave the function module..
BAPI_IPACK_CHANGE    and BAPI_IPACK_START.
and some one gave other function module.. like .. EPS_GET_DIRECTORY_LISTING
i tryd for All these options.. but i'm not getting the exact solution... even i'm unable to pass the parameters also.. beacuse.. in that function what parameters can i pass....</b>
can u plz suggest me the solution..
Thanks
Babu

Hi Friends,
for the above requirement i had write the bellow coding in the routine.. it is working.. but the problem is.. it was loading only the last file..(30 th file data only..)
data : z1(50) type c,
         z2 type c,
         z3(50) type c,
         z4(50) type c.
         Z2 = 1.
   Do 5 times.
          z1 = 'C:\Documents and Settings\e10035\Desktop\'.
          z3 = '.csv'.
          concatenate z1 z2 z3 into z4.
          p_filename = z4.
          z2 = z2 + 1.
    Enddo.
SO, CAN YOU PLZ SUGGEST ME.. when ever the file name was changing in the loop.. that automatically should load into the PSA ..
plz... plz.... help regarding this..
Bbau

Displaying dynamically changing image: a problem with JLabel.

Hello! I use NetBeans 5.5 and I develop my GUI with Matisse. I'm rather a beginner in developing GUIs with this editor...
I'd like to display a dynamically changing image. The idea is: GUI shows the image, that is modified as some computations run in a different thread. App will be run on a single machine.
I'm trying to display the image as a label's icon. The problem is that my app's frame can be resized - and when it is, the label also resizes. When the label is resized, the image should also be resized - the image should always be of the same size as the label. The problem? I noticed, that it works only when I make my app's bigger. When I try to lower its dimensions, the label's dimensions remain the same. Why the label don't make its size smaller?
My code works as follows: when app's main frame is resize, the panel (the one, that the label is placed in) is also resized. And, since the label is in the panel, it (should) also be resized. So I wrote all the resize-events handlers (therefore I know that the resize event is sent when my app's frame is resized, and when the panel is resized - but the label is resized only when it grows bigger). In this methods I modify the image displayed in the label (I resize the image).
Or, perhaps, there is some other way to show a (dynamically changing) image with Swing... I chose JLabel, because I didn't want to write my own JComponent. JLabel can display image and that is all I need. The problem is: when the label grows bigger, I create a new, bigger image (icon). Why my label don't get smaller (the resize event isn't even sent)?

There is no component that dynamically resizes an image. You need to create your own. Something like this:
JComponent component = new JComponent()
     protected void paintComponent(Graphics g)
          // Scale image to size of component
          g.drawImage(yourImage, 0, 0, getWidth(), getHeight(), null);
};

Dynamically Changing Approvers in Vacancy Creation

Similar Messages

Maybe you are looking for