DYNPRO_FIELD_CONVERSION

Hello All,
I am getting system dump due to "DYNPRO_FIELD_CONVERSION". This is happening as negative sign is appearing in cumulative quantity field in VBAP and VBEP tables.
"Information on where terminated
The termination occurred in the ABAP program "SAPMV45A" in
"VBEP-EDATU_AUSGEBEN".
The main program was "SAPMV45A ".
The termination occurred in line 13 of the source code of the (Include)
program "MV45AOEP_VBEP-EDATU_AUSGEBEN"
of the source code of program "MV45AOEP_VBEP-EDATU_AUSGEBEN" (when calling the
editor 130)".
The Domain MENG15 for this field does not allow negative sign. Why is then negative sign appearing?
Please help me with the solution to remove the negative quantity from the field.
As a temporary solution, to stop the system dump can I put "V" at the end of the text in "Texts/I/O templates" tab? As this is a standard field I have doubt.
Please suggest.
Thanks & Regards
Sonalika

Hello,
Thanks for the reply.
In my case we are not getting negative delivery quantity. The required quantity and delivery quantity are appearing as postive. But the cumulative quantity field is having the negative sign.
For my project we are using a 3rd party tool for availability check. Quantity calculation happens everyday during reatp and data is sent back from 3rd party system.
Dont know exactly where the negative quantity is coming for one order item. There are thousands of line items in the order.
Only one or 2 items get such error.
Thanks & Regards
Sonalika

Similar Messages

  • Getting the value of a dynpro field in an exit for a standard search help.

    Hallo Experts!
    I need to modify the selected data displayed in standard sap search help: H_T357
    What I've done is create an exit for the search help.
    Then, when CALLCONTROL-STEP = 'DISP' I use the function module F4UT_PARAMETER_VALUE_GET and I get the value of the parameter 'WERKS' correctly. I think that this function module can only obtain values from the parameters of the search help. Well, here is the problem, I would like to get the values of dynpro fields
    'ILOA-STORT' and 'VIQMEL-QMART' (warning type) in transaction IW21.
    I prefer not to add these fields as parameters to the standard search help: H_T357.
    Any ideas for getting the value of these fields? I've seen functions modules: F4UT_GET_ENVIRONMENT and F4UT_SH_SIC_GET_FIELDS. But I don't know if I can use them  for my porpuses.
    Thanks a lot in advance.

    Hello again,
    I have already solved the problem using function module 'DYNP_VALUES_READ'.
    Thanks, David.

  • Problem with reading Dynpro fields

    Hi,
    I have some tabstrips. On each tabstrip, I have a
    container for an ALV and on the bottom I have another
    subscreen for some input fields.
    Under the subscreen I have some buttons to insert, delete
    etc...
    The fields in my subscreen I have bound to DDIC table
    fields and I have defined that in my program under TABLES
    in my declaration.
    So when I write something in the fields, their content
    has been written to my table-structure defined in TABLES.
    If you double click on a line in the alv, the content of
    the line has been written to my dynpro fields in the
    subscreen.
    My problem now is:
    When You have double clicked a line and the content was
    filled in my dynpro fields and I change the values after-
    wards, I do not have the changed field content in my
    TABLES structure. It´s because, the framework isn´t
    processing my PBO of the subscreen.
    How can I call the pbo manually to get the new field
    content, when I´m pressing the button on the parent
    dynpro?
    I hope it´s possible to understand my problem!
    Cheers Arne

    Hi again,
    I have tried both functions Dynpro_field_get and read_values, but I´m not getting any content. With dynpro_field_get, I´m getting the fieldnames, but not the values!
    I have seen, when I´m pressing enter, after I have typed in the new field values, my TABLES structure has been updated. But I think, it´s not very user friendly, if You have to pay attention to press enter before pressing the "add" button...
    Any other idea? Or do You know why I´m not getting any content?
    Cheers Arne
    Message was edited by: Arne Hein

  • Quantity field conversion problem in SAP script

    Hi experts,
    I have problem with sap script quantity field conversion.
    In purchase order the actual value of field( MDPM-ERFMG) is 3,500.
    But in Print preview it is showing only 3.5
    Any one Please help me in this problem
    thanks in advance
    murali

    Hello,
    check this:
    Number of Decimal Places
    A program symbol of one of the data types DEC, QUAN, and FLTP can contain decimal place data. Use the option below to override the Dictionary definition for the number of decimal places for the formatting of this symbol value.
    Syntax
    &symbol(.N)&
    The EKPO-MENGE field contains the value 1234.56. The Dictionary definition specifies 3 decimal places and an output length of 17.
    &EKPO-MENGE& -> 1,234.560
    &EKPO-MENGE(.1) -> 1,234.6
    &EKPO-MENGE&(.4) -> 1,234.5600
    &EKPO-MENGE&(.0) -> 1,235
    REgards,
    Vasanth

  • Item  Field  Conversion

    Hi,
       can any body  give me a brief introduction about Item  Field  Conversion.. When we need to go for this.. and  how can we do this.. please suggest me..
    Thanks
    babu

    Hi,
    Itemfield Conversion :
    Adds functions to SAP NetWeaver for converting data to and from XML. It can process unstructured, semi-structured, and structured data. The Conversion Agent can be called using an adapter module in the Adapter Framework of SAP Exchange Infrastructure.
    You can find SAP Conversion Agent by Itemfield in the SAP Software Distribution Center on SAP Service Marketplace at service.sap.com/swdc.
    A partnership with Itemfield aims to introduce complex data transformation capabilities to SAP's offering. But the partners will face significant integration and support challenges.
    On 5 December 2005, Itemfield, a provider of data transformation software, announced a partnership agreement with SAP. Under the terms of the agreement, SAP will embed the Itemfield Conversion Agent for SAP NetWeaver in its NetWeaver suite. This is an adaptation of Itemfield’s ContentMaster technology that is designed to plug into the latest release of NetWeaver Exchange Infrastructure (XI), SAP’s application integration platform.
    The addition of SAP to the list of Itemfield partners — which includes IBM, Informatica, Oracle, Microsoft, webMethods and Software AG — moves the company much closer to its goal of positioning ContentMaster as the de facto standard for independent data transformation technology. SAP's NetWeaver XI is achieving growing adoption, with 1,600 installed customers to date, but has somewhat limited transformation features. This combination of factors gives Itemfield an opportunity to substantially boost its own customer base. However, success will require a robust marketing effort, and the ability to scale up quickly to support a growing number of global customers.
    The partnership will also help SAP make up for the lack of complex data transformation capabilities in XI — a limitation that SAP customers have had to work around, either by developing custom code or by stretching the use of the XI business process management facility. The Itemfield Conversion Agent for SAP NetWeaver provides XI users with a proven and powerful option to address even the most complex unstructured, semistructured and structured data transformation issues. However, SAP will face a major challenge in effectively supporting, and keeping in a coherent state of integration, the growing number of third-party products in the XI platform (which include iWay and Seeburger adapters, IDS Scheer process-modeling tools, and now Itemfield's technology).
    XI customers with complex data transformation requirements: Evaluate whether the Itemfield Conversion Agent for SAP NetWeaver meets your technological and financial needs. Demand contractual guarantees of adequate long-term support from SAP (which offers full support for the product) before making a commitment.
    XI customers adopting XI in conjunction with other Itemfield partners' platforms: Consider using Itemfield as a "unified" transformation utility across multiple integration products (but remember that the Itemfield Conversion Agent for SAP NetWeaver is an additional-cost item, subject to the controversial XI volume-based pricing schema).
    I hope this will clarify you.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Date field conversion

    hi gurus! can someone give me a  tip on a date field conversion.
    I have a field that comes YYYYMMDD but i want to convert to DD.MM.YYYY
    Can someone help me on this
    Thk, Regards

    REPORT  Z_82235_TEST4                           .
    data:  date1(8) type c,
           date2(10) type c.
           date1 = 'YYYYMMDD'.
    CONCATENATE date1+6(2) date1+4(2) date1(4) INTO date2 separated by '.'.
    you pass your date to date1 in place of 'yyyymmdd' and you will gate ur desired output on date2.

  • Field conversion problem

    Hi,
    somebody has written mv45afzz program. now I am modifying that.
    last week i included a field in vbap table as field1 (CHAR, 18).
    num1 field has CHAR(10).
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
      if vbap-matnr <> *vbap-matnr.
        clear vbap-field1.
        select single t1~num1 into vbap-field1
          from mara as t1 inner join zcust as t2
            on t1num1 = t2num1
          where matnr = vbap-matnr
          and   mtart = 'NSTK'
          and   delet = ''.
      endif.
    this user exit is related to Contracts(va41). when i am giving material number in va41, it is checking with mara table and saying that number is not valid.
    for example i entered 1001 number as matnr which is exist in the mara table.
    In debug mode, i added 14 zeros in field1, then it is working perfectly.
    shall i need to call the field conversion function module like...
    CONVERSION_EXIT_MATN1_INPUT...
    anybody has idea...
    Thanks in advance,
    Yad.

    Hi,
    I have written like this..still not getting...padding zeros to vbap-field1 is my solution..but how can i do that...
    FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    Data: num1 like zcust-num1,
             field1 like vbap-field1.
    CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
        EXPORTING
              INPUT              = num1
           IMPORTING
             OUTPUT             = field1
      if vbap-matnr <> *vbap-matnr.
        clear vbap-field1.
        select single t1~num1 into vbap-field1
          from mara as t1 inner join zcust as t2
            on t1num1 = t2num1
          where matnr = vbap-matnr
          and   mtart = 'NSTK'
          and   delet = ''.
      endif.
    Thanks in advance,
    Yad.

  • ALV and Dynpro-Fields

    Hi!
    I've created a dynpro with an ALV-Grid for Data-Overview and a lot of fields on the dynpro to change/insert additional data.
    How can I read data back from the dynpro fields when changing the selected row at the ALV.
    At the time of handling the event, the data entered on the dynpro isn't actual available in my coding.
    Thanks for any hints!
    Peter

    Hi!
    This is the dynpro-logic:
    process before output.
      module status_9210.
      module vorschlag_9210.
      call subscreen g_buch_button
        including sy-repid g_buch_button_subscreen.
    process after input.
      chain.
        field: zhrtv_planzusatz-buch_status,
               zhrtv_planzusatz-buchungscode.
      endchain.
      chain.
        field: zhrtv_planzusatz-betrg,
               zhrtv_planzusatz-waers.
      endchain.
      module save_data_9210.
    The PBO-Coding is just do fill the ALV-Grid and switch some dynpo-fields.
    In the module save_data_9210 the entered data is saved to the corresponding structures.
    Thanks for help!
    Peter

  • ALV-Grid and update dynpro fields

    Hi!
    I've created a dynpro with an ALV-Grid for Data-Overview and fields on the dynpro to change additional data.
    My ALV has one editable column, when this value change I calculate other value for  a field dynrpo, but I canu2019t see this change in my field dynpro.
    How can I update my data filed dynpro when changing the selected row at the ALV.
    I use the method handle_data_changed to obtain changes in ALV-Grid and it works fine, but I canu2019t update my fileds on the dynpro, when changing value in ALV.
    Thanks for any hints!
    Lili.

    This error occurs becuase when you change anything on the ALV, control is not triggering the PAI and PBO of your dynpro. Hence your values are not getting updated in the dynpro field.
    You should call the CL_GUI_CFW=>DISPATCH in PAI module to trigger the PAI also after the event has been triggered in the ALV.
      CALL METHOD CL_GUI_CFW=>DISPATCH
        importing return_code = return_code.
    * a control event occured => exit PAI
      if return_code <> cl_gui_cfw=>rc_noevent.
        clear g_ok_code.
        exit.
      endif.
    Regards,
    Naimesh Patel

  • Issue with Varchar2 field conversion for report output generated in EXCEL

    Hello All,
    I have an unique problem with one of my new reports for the User. The user wants the report output generated in excel data only(delimited data) format *(reports builder 10g)* .
    Everything was fine until i encountered this problem, there was this field which has unique ID's(alphanumeric and numeric), when i tried to run the report and generate output in Excel the numeric ID's say for example *(41593497999679354429)* is converted in excel and displayed like *(2.5881E+19)* and after format cells in excel it displays *(41593497999679300000).*
    The issue is only with 20 digits numeric ID's , if i append any special character to the end say '#' or '..' it shows the exact value along with the appended character. But the user insist they need only the value that is in the table. I am finding it hard to figure out, if any one of you have encountered the same issue or if any of you have any suggestions to overcome this excel conversion thing please do advice me.
    Thanks in advance :)

    Thanks for you response, but i already tried what you suggested, instead of appending single quote in front of ID, i did at the end prior with '#', it preserves the value if i add any character to the id but the appended value shows up too :(.
    Well, i just got the solution and it did work, thanks to [Brian Hill|https://forums.oracle.com/forums/thread.jspa?threadID=651632] for the post, i did what exactly he said and it worked. I was so very happy and wanted to share with everyone.

  • Middleware-Error of Field conversion from R/3 to CRM

    Hello Friends,
    I am getting the below error when we tried replicating pricing condition objects from R/3 to CRM. Kindly help me if you have any solution on this.
    Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
    Message no. CND_MAP141
    Diagnosis
    Conversion of the source field into the target field cannot be implemented. Possible causes may be:
    No conversion is defined for the current contents of the source field in the system tables for condition exchange.
    There is no conversion rule for converting the current field content in the system tables for condition exchange.
    Conversion according to the defined conversion rule was not correct for the current contents of the source field.
    The reason for this os often problems that result from putting together an R/3 System with a CRM System. These problems are, for example:
    not paying attention to the restrictions in CRM for data values or supporting applications and objects,
    incorrect exchange objects or exchange objects with the wrong selection values,
    an inconsistent data structure from the R/3 OLTP System.
    Thanks & Regards,
    Yogesh

    Hello Yogesh
    I have just noticed the message you placed on SDN re condition customising download errors.  Did you ever get to the bottom of this problem ?
    The reason I ask is that I am getting similar errors. I actually started with two errors which I believe are related, these being:
    Funct. CND_MAP_CONV_FUNC_T682Z_FNAME cannot convert content AUBEL of field T682Z-QUFNA to field /SAPCND/T682Z-QUFNA
    and
    Funct. CND_MAP_CONV_FUNC_T682Z_QUSTR cannot convert content KOMP of field T682Z-QUSTR to field /SAPCND/T682Z-QUSTR
    I have since read OSS Note 319636 and looked at maintaining the separate
    conversion rules in CRM Customizing table CND_MAPM_CNV_FLM by adding an
    entry for AUBEL into view V_CND_MAP_CNVFLD using SM30. This I saved to
    a transport.
    I then looked to add AUBEL to the field catalog within the IMG however I received a
    message stating that :
    "Entry is in SAP name space. Message no. /SAPCND/CUSTOMIZING403".
    So it won't let me.
    Did you have similar problems and did you resolve them ?
    Regards
    Ian
    [email protected]

  • CLOB field conversion

    Hello,
    I'm doing an Access 97 -> Oracle 8.1.6 migration using OMWB 1.2.5.0.0.
    After having done a complete successful migration including
    modification of the source database, we notice that the Memo to CLOB
    conversion apparently was not completely successful: special
    characters such as the German umlauts are not displayed correctly, not
    within Access nor in plain SQL queries.
    "Normal" fields do not show that effect, but have been converted
    correctly.
    Is this a known issue?
    Any hint appreciated.
    Regards, Thomas Meyer
    null

    Hello again Thomas,
    I hate to be harbinger of bad news but there is no official workaround available. My only suggestion would be to avoid the CLOBS and use varchar but this in itself causes problems if the CLOB data is too large to for the varchar type to hold.
    As for estimating the timescale for the next release of the Oracle server.. sorry but yet again I cannot help there.
    As this is an RDBMS issue, contact Oracle support and have the bug's priority escalated.
    Not much help really. I do apologise.
    Regards
    Brian.

  • Web Dynpro Field Elements Disabled

    Hello:
       The text fields of my Web Dynpro App are disabled when I run the app. Im trying to change the Collection Cardinality in the context to 1...1 but I cant, it seems to be disable too.
       Can anyone help me? How can I change the cardinality?
    Best Regards
    Thanks
    Mario G

    Hi
    You need to add the following code in your WdDoInit()
    //create a new model instance
    model = new <name_of_your_model>();
    //create model objects
    <name_of_your_request_model_class>   requestMO = new <name_of_your_request_model_class>(model);
    <name_of_your_send_model_class>       sendMO = new <name_of_your_send_model_class>(model);
    //associate model objects
    requestMO.set< name_of_your_send_model_class>(sendMO);
    //bind exacutable model object to context node
    wdContext.node<name_of_your_context_node_for_ws>().bind(requestMO);
    Regards,
    Edzon

  • Overflow field conversion type P

    The MM is a problem with the transaction MB1C.
    When she tells convert to KG / TN is the following message:
    An overflow field during the conversion. Possibly, the User defined parameters transfer very small. (This is probably the case of fields type P and I).
    Someone has gone through this?
    Thank you.

    Dear,
    It occurs if the n alternative unit of measure which is a smaller unit than the base unit of measure (for example, base unit of measure = kg, alternative unit of measure = g). Same case in your error also.
    Regards,
    R.Brahmankar

  • Search help for Dynpro field

    Hi ,
    How to keep a help calendar for a field in Dynpro.
    Please help me.
    Thanks
    Neelima

    Hi clinde,
               To bring calendar as search help in simple way try this code.
    Paramters : date type DATS.
               This will bring the calendar help else u have to refer the type from dictionary having dats as a field type or field attached with search help that can bring calendar help.
    hope this will help u.........

  • Dynpro field: value help via function module

    Hi all!
    I've got a subscreen with an input field. We would like to use function module RH_OBJID_REQUEST_46A to create a popup where the user is able to select values.
    In a normal report I would do this with AT SELECTION-SCREEN ON VALUE-REQUEST FOR. I wonder how it to do it in a dynpro? Is it neccessary to implement a search help and call the function module in a search exit?
    Thank you a lot!
    Florian

    hi
    in the Dypro screen , goto flow logic.
    Process Before output
    Process After input
    Process on value request.
    field vbeln module mycode_vbeln. "in this module  mycode_vbeln, u will write ur code
    Kind Regards
    Sajid

Maybe you are looking for