E-bay companion

Foxfire has what it calls an e-bay companion. When you open the home page it has on the left of screen a summary of what you are doing on your e-bay. It is extremely useful - does Safari have a way to accomplish this feature?

No, there is no software that will do this for Safari. Firefox is an entirely different beast; it's highly extensible, but all those extensions also slow it down considerably.
Mulder

Similar Messages

Satellite P200-1EE Can I install a 2nd hard disk in the spare bay?

First of all, hi everyone!
I have the above model laptop, and it has a spare disk bay. There are pin connectors at one end, but it does not seem like the drive will fit. It's like there is a component missing - like the connector slot housing for the 1st drive. I have bought a 500GB drive, and have tried seeing whether it would fit. The 1st drive has a metal caddy attached, and that did not work either.
Is it possible to fit a 2nd drive to this model? If so, what would I need to do it?
Thanks!
Andy

Hi
If you have a connector in second HDD bay you can add a second HDD. But you will need such a metal caddy as on the first HDD. Therefore you can contact an authorized service provider because you can get all spare parts from them.
On the Toshiba website is a list of all ASPs, check this!!!

Boot Camp on MBP internal drive (disk1), attempts to boot off CD bay drive (disk0).

Hi. I have an early 2011 MBP running the latest version of Mavericks with two internal SSDs. The HD bay has a 1TB (disk1) and the CD bay has a 512MB (disk0). Boot Camp is installed on the 1TB. When I boot up the system and hold down the Option key, I see Windows as a boot option. If I select it, however, it starts to boot and then goes immediately to a black screen with a white underline cursor blinking in the upper left. It remains like this until I reboot.
After spending a lot of time looking into the cause of this problem, I've come to the conclusion that the system is confused by the drive in the CD bay and is attempting to boot from it before it attempts to boot off the drive in the HD bay. I installed Boot Camp originally by using Boot Camp Assistant to partition the drive and then using WinClone to copy over a previous Boot Camp partition. I'm pretty rusre that as a result, one of the following two things is happening:
Whatever setting Boot Camp Assistant made to tell the Windows install DVD to boot first is still in effect and Boot Camp is attempting to boot from the CD bay.
The Boot Camp partition is set from the previous drive it was on to boot from disk0, which is now being assigned to the drive in the CD bay.
To test these theories, I've unplugged the drive in the CD bay and rebooted, at which point Boot Camp boots perfectly off the drive in the HD bay.
The drive in the CD bay is set to a single HFS+ partition. I've looked at the GPT and MBR on both drives and they seem fine (the Boot Camp partition is bootable). Does anyone have any idea what I'm missing here?
Thanks in advance.
Craig

Still having issues, any suggestions would probably be helpful.

How can i get a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

Detailed Software Repair Instructions using Pc Companion(Win)or Bridge for MAC. (Update 8/5/2014)

We have an extended guide that should help you repair the system of your phone. This instructions are valid for all Android based units and for some legacy Sony Ericsson models(The list of phones that can be used with the application is displayed in Step 9 of the process). please follow the instructions carefully: Turn the phone off and disconnect it from the computer. 1. Visit this link:http://www.sonymobile.com/us/tools/pc-companion/Click on Download PC companion2.Run the software After the installation the first screen will show you the PC Companion Startup Guide which gives you a brief explanation on the main modules of PC companion (Support Zone, Xperia Transfer, Contact setup and Media Go) Keep clicking next.3.Now you will see the screen with the different modules.Select Support Zone> Click Start. The program will download the module. Then click on start on Phone/Tablet Software update. (Here you can choose to update an accessory, go to step 14 for instructions) Note: At this point if you get an error stating that "unable to install update components" or "server is busy" Please proceed to step 13 . If you not see that error then continue with step 4.
4. The program will show a window saying "could not find phone/Tablet” Do not Connect phone instead select Repair my phone/tablet. This will bring you to a window with a warning that says "data will be lost" (do you want to continue) Select to continue (Data in the phone will be deleted, only data in the SD card will remain. Make sure you have done all proper backups if possible)6. The program will issue a second warning stating that “data saved in the phone /tablet will be overwritten during the update of your phone”. Click on the checkmark box next to the acceptance text and select Next to continue.7. Next the computer will download the necessary files (Prepare stage, this can take several minutes depending on the speed of your connection) and then its done it will show you a list of recommendations for a successful update operation. When you are done reading this section click on the checkmark box and press Continue8. Next you will get a Battery level warning that states that your phone should have at least 80% battery. (If the issue in the phone does not permit the unit from turning on, then charge it connected to the wall charger for at least 2 hours and then comeback to this step) Then click on the checkmark and select Next9. Choose the Phone from the list then click on "next" then you will see a new section telling you how to connect the phone. (don't connect it yet) Again, at this point the phone must be off and disconnected from the PC. 10.. Connect the cable to the PC not to the phone, then while pressing and holding the indicated button (in the steps on screen an specific button will be shown for you to press on the phone) connect the cable to the phone and keep holding the indicated button until the program says "the update of your phone has started..." (in some cases a message of "Installing drivers" will appear before the message of "the update of your phone has started..." is shown.) 11. If you failed to follow the steps correctly the phone will turn on. If this happens disconnect the phone from the cable, turn it off and repeat from step 10). 12. If the phone is connected properly, PC Companion will proceed with the update ( It will tell you to let go of the key) then wait for the update to finish and follow instructions on screen to disconnect the unit. End of process. ----------------------------------------------------------------------If the software fails to install:13. If "unable to install update components" 1. Close Pc companion 2. Install Java from: http://www.java.com 3. start Pc companion again and try to do the software unlock process once more. 14.Select Accessories software update. Click on start and the computer will download the necessary files (Prepare Stage) it will take several minutes. Then follow the instructions from step 8. Note: Some computers may block the installation of the update service, if this happens use this:http://www.sonymobile.com/us/tools/update-service/ this is the Standalone update software. (Not globally available)If the Phone is unresponsive (Then do this extra step and when done proceed to redo the repair process:Press and hold the power button and the volume up button at the same time for 10 to 15 seconds. This will reset the unit)Note: This procedure does not work for the Xperia Play R800x (Verizon and other Non SIM card variants of the Xperia play that lack MTP support. It does work for the R800a At&t's model)Bridge For Mac instructions on my post below. Valid for all Android based units and most java Sony Ericsson units.

Here are the basic Steps for Bridge for MAC.Download Bridge for MAC from:http://www.sonymobile.com/gb/tools/bridge-for-mac/The phone should not be connected to the MAC.
The phone should be off.After the Download unzip the file and drag the bridge for MAC icon to the Applications folder. (install then use finder to locate icon)In the Main "No phone connected" window, on the top menu (top application menu) Select "Phone" and scroll down to "Repair phone"
This will open the Phone Software Restore window with the 3 sections for Start, Prepare and Update.
Click on continue bellow. Doing so will popup a window warning you about the loss of your personal info. Click on the checkmark signaling that you understand the data loss situation,
This will take you to the Connection Procedure Screen. Follow the instructions in the screen and click on continue*.
*One key aspect of the last step to keep holding the indicated button before and after you connect the phone to the MAC until the update starts. IF this is not done correctly then the phone won't connect to the MAC

Error Message when installing Companion CD for HTMLDB 1.6 and HTTP Server

Hi. First time forum user so bear with me.
I'm not sure if this is the correct forum for this but the assistance of anyone who may be able to shed some light on the problem whould be greatly appreciated. I am having a problem when attempting to install the Companion CD for HTMLDB 1.6 and HTTP Server, details given below:
The following Oracle components have been successfully installed
     Oracle 10gR2 Database.
     Oracle 10gR2 Database patch 10.2.03.
     Critical patch up date (security).
The following Oracle component failed to install.
     Companion CD for HTMLDB 1.6 and HTTP server
Scenario leading up to failure
     Extracted companion CD installation files to D:\oracle\utilities\Oracle_10_2_0_Companion
     Executed D:\oracle\utilities\Oracle_10_2_0_Companion\companion\setup.exe.
The following error message is displayed in a "JAVA VIRTUAL MACHINE LAUNCHER" dialog box
     "Could not find the main event class. Program will exit."
I have been attmepting to resolve this problem for over a week and have already checked the following with no resolution to the problem:
Cause. This issue may have to do with two issues (and may occur more on Windows):-
1. Within the ORACLE_HOME directory full pathname there is a space.
2. The directory from where the software / patch is being installed has a space within the directory full
pathname (where the file for the installation by default is named products.jar or products.xml).
Solution. To implement the solution, please execute the following steps:-
1. Rename the full pathname directory NOT to contain a space.
2. Launch again the OUI... and verify if the problem occurs.
Any further guidance would be greatly appreciated.
Edited by: user10386555 on 03-Oct-2008 02:51

Can you install using OUI from the RDBMS installation? IIRC, there is a problem using OUI on companion to install companion items.

Bayes Error Question after Spamassassin Upgrade

I have just upgraded to Version 3.1.5 of the Spamassassin and I am getting the following readout when after I run spamassassin -D --lint
xserve1:/var/amavis root# spamassassin -D --lint
[18757] dbg: logger: adding facilities: all
[18757] dbg: logger: logging level is DBG
[18757] dbg: generic: SpamAssassin version 3.1.5
[18757] dbg: config: score set 0 chosen.
[18757] dbg: util: running in taint mode? yes
[18757] dbg: util: taint mode: deleting unsafe environment variables, resetting PATH
[18757] dbg: util: PATH included '/bin', keeping
[18757] dbg: util: PATH included '/sbin', keeping
[18757] dbg: util: PATH included '/usr/bin', keeping
[18757] dbg: util: PATH included '/usr/sbin', keeping
[18757] dbg: util: final PATH set to: /bin:/sbin:/usr/bin:/usr/sbin
[18757] dbg: message: ---- MIME PARSER START ----
[18757] dbg: message: main message type: text/plain
[18757] dbg: message: parsing normal part
[18757] dbg: message: added part, type: text/plain
[18757] dbg: message: ---- MIME PARSER END ----
[18757] dbg: dns: is Net::DNS::Resolver available? yes
[18757] dbg: dns: Net::DNS version: 0.59
[18757] dbg: diag: perl platform: 5.008006 darwin
[18757] dbg: diag: module installed: Digest::SHA1, version 2.10
[18757] dbg: diag: module installed: Archive::Tar, version 1.30
[18757] dbg: diag: module installed: IO::Zlib, version 1.04
[18757] dbg: diag: module installed: DB_File, version 1.814
[18757] dbg: diag: module installed: HTML::Parser, version 3.36
[18757] dbg: diag: module installed: MIME::Base64, version 3.05
[18757] dbg: diag: module installed: Net::DNS, version 0.59
[18757] dbg: diag: module installed: Net::SMTP, version 2.29
[18757] dbg: diag: module installed: Mail::SPF::Query, version 1.999001
[18757] dbg: diag: module installed: IP::Country::Fast, version 604.001
[18757] dbg: diag: module installed: Razor2::Client::Agent, version 2.82
[18757] dbg: diag: module installed: Net::Ident, version 1.20
[18757] dbg: diag: module not installed: IO::Socket::INET6 ('require' failed)
[18757] dbg: diag: module installed: IO::Socket::SSL, version 1.0
[18757] dbg: diag: module installed: Time::HiRes, version 1.68
[18757] dbg: diag: module installed: DBI, version 1.52
[18757] dbg: diag: module installed: Getopt::Long, version 2.34
[18757] dbg: diag: module installed: LWP::UserAgent, version 2.033
[18757] dbg: diag: module installed: HTTP::Date, version 1.47
[18757] dbg: ignore: using a test message to lint rules
[18757] dbg: config: using "/etc/mail/spamassassin" for site rules pre files
[18757] dbg: config: read file /etc/mail/spamassassin/init.pre
[18757] dbg: config: read file /etc/mail/spamassassin/v310.pre
[18757] dbg: config: read file /etc/mail/spamassassin/v312.pre
[18757] dbg: config: using "/usr/local/share/spamassassin" for sys rules pre files
[18757] dbg: config: using "/usr/local/share/spamassassin" for default rules dir
[18757] dbg: config: read file /usr/local/share/spamassassin/10_misc.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_advance_fee.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_anti_ratware.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_body_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_compensate.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_dnsbl_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_drugs.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_fake_helo_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_head_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_html_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_meta_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_net_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_phrases.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_****.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_ratware.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/20_uri_tests.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/23_bayes.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_accessdb.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_antivirus.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_body_tests_es.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_body_tests_pl.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_dcc.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_dkim.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_domainkeys.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_hashcash.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_pyzor.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_razor2.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_replace.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_spf.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_textcat.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/25_uribl.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_de.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_fr.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_it.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_nl.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_pl.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/30_text_pt_br.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/50_scores.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_awl.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_dk.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_dkim.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_spf.cf
[18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_subject.cf
[18757] dbg: config: using "/etc/mail/spamassassin" for site rules dir
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_adult.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_bayes_poison_nxm.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum0.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum1.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum2.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_html.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_obfu.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_oem.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_random.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sare_stocks.cf
[18757] dbg: config: read file /etc/mail/spamassassin/70_sc_top200.cf
[18757] dbg: config: read file /etc/mail/spamassassin/99_FVGT_Tripwire.cf
[18757] dbg: config: read file /etc/mail/spamassassin/Chinese_rules.cf
[18757] dbg: config: read file /etc/mail/spamassassin/local.cf
[18757] dbg: config: read file /etc/mail/spamassassin/weeds.cf
[18757] dbg: config: using "/private/var/root/.spamassassin/user_prefs" for user prefs file
[18757] dbg: config: read file /private/var/root/.spamassassin/user_prefs
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::URIDNSBL from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Hashcash from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Hashcash=HASH(0x1c828d8)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::SPF from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::SPF=HASH(0x1d91a64)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Pyzor from @INC
[18757] dbg: pyzor: network tests on, attempting Pyzor
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Pyzor=HASH(0x1c66f5c)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Razor2 from @INC
[18757] dbg: razor2: razor2 is available, version 2.82
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Razor2=HASH(0x466db0)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::SpamCop from @INC
[18757] dbg: reporter: network tests on, attempting SpamCop
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::SpamCop=HASH(0x468e68)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::AWL from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::AWL=HASH(0x1dd02d0)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::AutoLearnThreshold from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::AutoLearnThreshold=HASH(0x1e34100)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::WhiteListSubject from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::WhiteListSubject=HASH(0x1e36be0)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::MIMEHeader from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::MIMEHeader=HASH(0x1e39d30)
[18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::ReplaceTags from @INC
[18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::ReplaceTags=HASH(0x1e3e260)
[18757] dbg: config: adding redirector regex: /^http:\/\/chkpt\.zdnet\.com\/chkpt\/\w+\/(.*)$/i
[18757] dbg: config: adding redirector regex: /^http:\/\/www(?:\d+)?\.nate\.com\/r\/\w+\/(.*)$/i
[18757] dbg: config: adding redirector regex: /^http:\/\/.+\.gov\/(?:.*\/)?externalLink\.jhtml\?.*url=(.*?)(?:&.*)?$/i
[18757] dbg: config: adding redirector regex: /^http:\/\/redir\.internet\.com\/.+?\/.+?\/(.*)$/i
[18757] dbg: config: adding redirector regex: /^http:\/\/(?:.*?\.)?adtech\.de\/.*(?:;|\|)link=(.*?)(?:;|$)/i
[18757] dbg: config: adding redirector regex: m'^http.*?/redirect\.php\?.*(?<=[?&])goto=(.*?)(?:$|[&\#])'i
[18757] dbg: config: adding redirector regex: m'^https?:/*(?:[^/]+\.)?emf\d\.com/r\.cfm.*?&r=(.*)'i
[18757] dbg: config: adding redirector regex: m'/(?:index.php)?\?.*(?<=[?&])URL=(.*?)(?:$|[&\#])'i
[18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/url\?.*?(?<=[?&])q=(.*?)(?:$|[&\#] )'i
[18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/search\?.*?(?<=[?&])q=[^&]*?(?<=%2 0|..[=+\s])site:(.*?)(?:$|%20|[\s+&\#])'i
[18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/search\?.*?(?<=[?&])q=[^&]*?(?<=%2 0|..[=+\s])(?:"|%22)(.*?)(?:$|%22|["\s+&\#])'i
[18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/translate\?.*?(?<=[?&])u=(.*?)(?:$ |[&\#])'i
[18757] warn: config: failed to parse line, skipping: scare RCVD_IN_NJABL_SPAM 3.0
[18757] dbg: plugin: Mail::SpamAssassin::Plugin::ReplaceTags=HASH(0x1e3e260) implements 'finish_parsing_end'
[18757] dbg: replacetags: replacing tags
[18757] dbg: replacetags: done replacing tags
[18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
[18757] dbg: config: score set 1 chosen.
[18757] dbg: message: ---- MIME PARSER START ----
[18757] dbg: message: main message type: text/plain
[18757] dbg: message: parsing normal part
[18757] dbg: message: added part, type: text/plain
[18757] dbg: message: ---- MIME PARSER END ----
[18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
[18757] dbg: dns: name server: 209.198.128.11, family: 2, ipv6: 0
[18757] dbg: dns: testing resolver nameservers: 209.198.128.11, 209.198.128.27
[18757] dbg: dns: trying (3) google.com...
[18757] dbg: dns: looking up NS for 'google.com'
[18757] dbg: dns: NS lookup of google.com using 209.198.128.11 succeeded => DNS available (set dns_available to override)
[18757] dbg: dns: is DNS available? 1
[18757] dbg: metadata: X-Spam-Relays-Trusted:
[18757] dbg: metadata: X-Spam-Relays-Untrusted:
[18757] dbg: metadata: X-Spam-Relays-Internal:
[18757] dbg: metadata: X-Spam-Relays-External:
[18757] dbg: message: no encoding detected
[18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'parsed_metadata'
[18757] dbg: uridnsbl: domains to query:
[18757] dbg: dns: checking RBL sbl-xbl.spamhaus.org., set sblxbl-lastexternal
[18757] dbg: dns: checking RBL sa-accredit.habeas.com., set habeas-firsttrusted
[18757] dbg: dns: checking RBL sbl-xbl.spamhaus.org., set sblxbl
[18757] dbg: dns: checking RBL sa-other.bondedsender.org., set bsp-untrusted
[18757] dbg: dns: checking RBL combined.njabl.org., set njabl-lastexternal
[18757] dbg: dns: checking RBL combined.njabl.org., set njabl
[18757] dbg: dns: checking RBL combined-HIB.dnsiplists.completewhois.com., set whois
[18757] dbg: dns: checking RBL list.dsbl.org., set dsbl-lastexternal
[18757] dbg: dns: checking RBL bl.spamcop.net., set spamcop
[18757] dbg: dns: checking RBL sa-trusted.bondedsender.org., set bsp-firsttrusted
[18757] dbg: dns: checking RBL combined-HIB.dnsiplists.completewhois.com., set whois-lastexternal
[18757] dbg: dns: checking RBL dnsbl.sorbs.net., set sorbs-lastexternal
[18757] dbg: dns: checking RBL dnsbl.sorbs.net., set sorbs
[18757] dbg: dns: checking RBL iadb.isipp.com., set iadb-firsttrusted
[18757] dbg: check: running tests for priority: 0
[18757] dbg: rules: running header regexp tests; score so far=0
[18757] dbg: rules: ran header rule __HAS_MSGID ======> got hit: "<"@lint_rules>"
[18757] dbg: rules: ran header rule NO_REAL_NAME ======> got hit: "[email protected]
[18757] dbg: rules: "
[18757] dbg: rules: ran header rule __MSGID_OK_DIGITS ======> got hit: "1159381766"
[18757] dbg: spf: no suitable relay for spf use found, skipping SPF-helo check
[18757] dbg: eval: all '*From' addrs: [email protected]
[18757] dbg: eval: all '*To' addrs:
[18757] dbg: spf: no suitable relay for spf use found, skipping SPF check
[18757] dbg: rules: ran eval rule NO_RELAYS ======> got hit
[18757] dbg: spf: cannot get Envelope-From, cannot use SPF
[18757] dbg: spf: def_spf_whitelist_from: could not find useable envelope sender
[18757] dbg: rules: ran eval rule __UNUSABLE_MSGID ======> got hit
[18757] dbg: spf: spf_whitelist_from: could not find useable envelope sender
[18757] dbg: rules: ran eval rule MISSING_HEADERS ======> got hit
[18757] dbg: rules: running body-text per-line regexp tests; score so far=3.188
[18757] dbg: rules: ran body rule __NONEMPTY_BODY ======> got hit: "I"
[18757] dbg: uri: running uri tests; score so far=3.188
[18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
[18757] dbg: bayes: not scoring message, returning undef
[18757] dbg: bayes: opportunistic call attempt failed, DB not readable
[18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=3.188
[18757] dbg: rules: running full-text regexp tests; score so far=3.188
[18757] dbg: info: entering helper-app run mode
[18757] dbg: info: leaving helper-app run mode
[18757] dbg: razor2: part=0 engine=4 contested=0 confidence=0
[18757] dbg: razor2: results: spam? 0
[18757] dbg: razor2: results: engine 8, highest cf score: 0
[18757] dbg: razor2: results: engine 4, highest cf score: 0
[18757] dbg: util: current PATH is: /bin:/sbin:/usr/bin:/usr/sbin
[18757] dbg: pyzor: pyzor is not available: no pyzor executable found
[18757] dbg: pyzor: no pyzor found, disabling Pyzor
[18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'check_tick'
[18757] dbg: check: running tests for priority: 500
[18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'check_post_dnsbl'
[18757] dbg: rules: running meta tests; score so far=3.188
[18757] info: rules: meta test DIGEST_MULTIPLE has undefined dependency 'DCC_CHECK'
[18757] info: rules: meta test SARE_OBFU_CIALIS has undefined dependency 'SARE_OBFU_CIALIS2'
[18757] info: rules: meta test FP_MIXED_****3 has undefined dependency 'FP_PENETRATION'
[18757] dbg: rules: running header regexp tests; score so far=4.666
[18757] dbg: rules: running body-text per-line regexp tests; score so far=4.666
[18757] dbg: uri: running uri tests; score so far=4.666
[18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=4.666
[18757] dbg: rules: running full-text regexp tests; score so far=4.666
[18757] dbg: check: running tests for priority: 1000
[18757] dbg: rules: running meta tests; score so far=4.666
[18757] dbg: rules: running header regexp tests; score so far=4.666
[18757] dbg: config: using "/private/var/root/.spamassassin" for user state dir
[18757] dbg: locker: safe_lock: created /private/var/root/.spamassassin/auto-whitelist.lock.xserve1.topequip.com.18757
[18757] dbg: locker: safe_lock: trying to get lock on /private/var/root/.spamassassin/auto-whitelist with 0 retries
[18757] dbg: locker: safe_lock: link to /private/var/root/.spamassassin/auto-whitelist.lock: link ok
[18757] dbg: auto-whitelist: tie-ing to DB file of type DB_File R/W in /private/var/root/.spamassassin/auto-whitelist
[18757] dbg: auto-whitelist: db-based [email protected]|ip=none scores 0/0
[18757] dbg: auto-whitelist: AWL active, pre-score: 4.666, autolearn score: 4.666, mean: undef, IP: undef
[18757] dbg: auto-whitelist: DB addr list: untie-ing and unlocking
[18757] dbg: auto-whitelist: DB addr list: file locked, breaking lock
[18757] dbg: locker: safe_unlock: unlink /private/var/root/.spamassassin/auto-whitelist.lock
[18757] dbg: auto-whitelist: post auto-whitelist score: 4.666
[18757] dbg: rules: running body-text per-line regexp tests; score so far=4.666
[18757] dbg: uri: running uri tests; score so far=4.666
[18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=4.666
[18757] dbg: rules: running full-text regexp tests; score so far=4.666
[18757] dbg: check: is spam? score=4.666 required=2
[18757] dbg: check: tests=MISSING_HEADERS,MISSING_SUBJECT,NO_REAL_NAME,NO_RECEIVED,NO_RELAYS,TO_CC_ NONE
[18757] dbg: check: subtests=__HAS_MSGID,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__NONEMPTY_BODY,__SANE_M SGID,__UNUSABLE_MSGID
[18757] warn: lint: 1 issues detected, please rerun with debug enabled for more information
I am concerned with the following -
[18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
[18757] dbg: bayes: not scoring message, returning undef
[18757] dbg: bayes: opportunistic call attempt failed, DB not readable
I know that I have a failure with the IO::Socket::INET6 also.
I am also not getting (never have gotten) the BAYES tag when I look at the Raw Source on Spam Emails. I am assuming that error above could be the issue.
Any help on this would be greatly appreciated. I love this discussion group and it has helped me out of a bind more than once!
Thanks in advance for your time.
G5 Power Mac Mac OS X (10.4.7)

Latest news!
I just looked at a spam email and I see that it is tagged here is the info
X-Spam-Status: No, hits=-1.827 tagged_above=-999 required=2 tests=BAYES_00,
DIET_1
Now I am still concerned about the error I listed above about the Bayes DB. Any help would be great.

Sony PC Companion Saving Update to Wrong Drive

Hi
I have an SSD with my Win 8.1 loaded and a HHD with all the programs, data, etc. I have an update waiting for my Z3 Compact but the Sony PC Companion keeps trying save the update to the SSD which doesn't have enough room.
Thre is no option to tell PC Companion to save the update somewhere else; is there any way to force it to save to D: instaed of C:
Thanks

@macshimi read the forum rules/guidelines
http://talk.sonymobile.com/t5/Welcome/Discussion-guidelines/m-p/349678#U349678
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Photoshop CC + Wacom Cintiq Companion Hybrid

Can I use Photoshop CC on my Wacom Cintiq Companion Hybrid tablet? It is an Android system. How can I download and install it?

Thomas Wyser I am sorry but you will need to run Photoshop CC using Windows 7 with Service Pack 1 or later. Alternately you could run it under Mac OS 10.7 or later although you would need a different computer. You can find a list of the system requirements at System requirements | Photoshop.

Mid 2007 iMac SSD in optical bay - cannot write to last block of device

Hi All,
I've just replaced my optical drive in my 20" mid 2007 iMac (Dual core, 2.4 Ghz, 2 Gb RAM running Mavericks) with a solid state drive (Crucial MX100). The plan is to transfer my boot disk to this drive while keeping my 1 Tb HDD for media and such.
I followed the ifixit guide and it all went smoothly, however when I try to partition or erase the new SSD using Disk Utility, it tells me "Operation failed - cannot write to last block of the device". After googling, I found some answers here that suggested the optical bay cable may be faulty, so I bought a replacement and swapped it in, but no such luck, same problem. I also saw some threads suggesting that the boot disk should be in the original hard drive spot, but since this isn't the boot disk (yet) this shouldn't be the issue.
My computer recognizes the new SSD but won't allow me to partition it. Any suggestions on how to proceed?
Thanks!

ds store wrote:
3. The new disk is just bad.
OK. If that's the case, I'll just get another disk.
Lots of problems with that hybrid drives on Mac's on these forums, get another one that's 7,200 RPM and from Western Digital, not Seagate.
With a 7,200 RPM you get more performance across the entire drive, not just what's cached in the small flash portion of the hybrid.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
1. Hybrid drives: I'm on number 8 in 6 different machines, no problems at all, what happens when you try?
2. The OP is not using a Hybrid.
3. Lot's of problems with WD drives not booting on these forums though.

Which HDD in Optical Bay of 15" Mid-2009 MBP?

Hi all,
I'm wondering if anyone can help me decide the best drive to install in the opti bay of my mid 2009 15" macbook pro (2.8 intel core 2 duo).
I recently upgraded to 8gb ram and switched out the original drive to a Samsund SDD and the results have been AWESOME (**see below if considering)! I'd now like to install a 1TB hard drive into the opti bay.
Does anyone have an opinion on the following:
1) What's the best drive for this?
2) Will I get the 3.0gb transfer rate if I get a SATA II drive? (I currently get 3.0gb rate with the SSD in the main bay.)
3) Will the sound be unbearable?
4) Will it overheat or make the fans perpetually run? (I had fan issues previously that were mostly solved with the upgrade, though they do still run often...any suggestions to solve this are also welcome.)
5) Any suggestions on an optical bay adapter? I've seen quite the gamut on Amazon.
I plan on using the 1TB opti-bay drive for storing all of my music, movies, documents, photos, etc. All apps/programs will be on the SDD.
Thanks in advance for any help!
**Side note for anyone considering a SDD+RAM update, I HIGHLY recommend it. It's truly like using a new machine! I use a 2012 retina MBP (2.3 intel core i7, SSD, 8g RAM) at work and the difference in speeds are marginal (though I do wish I got the same battery life). Highly recommend the upgrade for anyone interested! Parts below:
SSD - http://www.amazon.com/gp/product/B00E3W19MO/ref=oh_details_o00_s00_i01?ie=UTF8&p sc=1
RAM - http://www.amazon.com/gp/product/B008LTBJFM/ref=oh_details_o00_s00_i00?ie=UTF8&p sc=1

Yes, your MacBook will run hotter and the fans will kick in more often. Only you can decide if it is acceptable.
I suggest you can start by using the drive that you removed from your MBP and see if the heat & noise are within tolerable limits.
Mechanical hard drives will not max out the sata interface. You can expect 80-100 MB/s with a mechanical hard drive.
Most users recommend the OWC Datadoubler caddy for the optical bay available here.
Good luck.

Hard drive not recognized in HDD bay.

Randomly, my laptop gave me the spinny pinwheel of death when I opened it, and upon restart, I got the good old folder with a "?" indicating there was no OS. Naturally, I booted up in network recovery, and low and behold, my SSD was not in the Disk utility list. I made an adjustment some time ago where I removed my optical drive, and installed the old HDD that came with the computer in it's place. I switched the drives, so that the SSD was where the optical drive should be, and the HDD in the drive bay. Upon startup, the computer booted up as usual from the SSD, and the HDD was not recognized. So from there I conlcuded that both the SSD and HDD are working correctly without failure. After putting the drives back where they originally were (HHD in optical bay, and SSD in Drive bay), and I booted up holding the option key, The SSD and recovery drive were there, but I received a prohibited sign (circle with slash) after a minute. Now it is not recognizing the drive again. I'm not sure whats going on, anyone hav any input?
Thanks

You have a faulty hard drive to logic board cable. Replace that and you should be fine and the drive put in the main bay should show up.

Mac Pro 2.66 drives in bay 2 and 3 display

I have 3 drives in my Mac Pro
bay 1 main drive OS 10.9.5
bay 2 ALL my files
bay 3 second set of files
bays 2 and 3 take a lot of time to display on the desktop
bay 1 - 3 minutes
bays 2 and 3 displays after about 5 to 6 minutes
when I try t open either drives in bay2 or 3
spinning ball and have to cold quit
tried switching drives around in bays same thing
possible BOTH drives are starting to go?
RD

I now see I switched bays again and the drives came right up, but clicking in and accessing gave me the spinning ball so I cold rebooted and clicked in again and after about 2 minutes the drive contents displayed. At that moment I was going to back up with CCC I got a msg that the disk I'm trying to copy has errors, so I'm waiting for disk utility to finish and hopefully correct.
I'm gonna need another drive, the drive giving me trouble is a Seagate, it's not the boot drive mind you it's the drive with all my files and never had problems with these drives before, should I get another Seagate?
anybody?
As I have to do this today.
R

Setting Up New FCP5 HD Bay -- Need Help

I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.

You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high.

How can I export text messages from Companion?

Dear all!
I have a number of old text messages which I would like to keep for the future. They are already erased from my tiny phone memory (I have an old SE "Cybershot"). So, right now they are only accessible via PC Companion. But: This only works if I connect my phone. If I launch the "text message synchronizing menu", the software asks me to plug in a phone, if I cancel, I'm back to main screen. However, I don't want to keep my old phone lying around for the next years just in case I want to browse through my old text messages some day.
Is there a way to export my these old messages or can I find them on my hard drive?
This might have been covered in some of the other threads, but I couldn't find a relevant post. I understand that "my Phone Explorer" allows to export text messages from the phone, but since mine are somehow hidden inside Companion, I am at a loss.
Thanks for your help!
Jan

Ahem, yes, that works Didn't think of this possibility at all...
You can save indivual messages or put all the highlighted ones into one single text document. It's not very comfortable to read, but it certainly does the job!
Thank you very much!

E-bay companion

Similar Messages

Maybe you are looking for