E-Mail Alerts Configuration in PI ... BSP error

Hi All
Am configuring alert framework. Process till getting them in Alert Inbox is done. Now I wanna direct the alerts to my e-mail ID.
Steps that i am doing :
1. E-Mail ID added in SU01.
2. SCOT configuration is done.
3. Now under Alert Inbox(RWB) when i try to use the Personalization tab it throws a BSP error stating :
BSP exception: Cannot start application sap/alertpersonalize_rules. Use transaction SICF to create application node. gsknoten an.
*Error type: *
Your SAP Business Server Pages Team
Now I don't have enough time to contact the team(Honestly I don't even know if there's such a team :P ). Hence thought of doing it myself. Am not bothered about accesses. I have any access required at my disposal. But I need the exact steps to be followed in SICF.
Tried following this : http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm But am lost now.
Kindly suggest me how to get this Personalization tab (in RWB) activated.

Did not see any settings required on Personalization tab at least in this document
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00e97ba2-85ce-2b10-20bc-bc05cd172154&overridelayout=true
Please check if it helps.

Similar Messages

Mail Alert Configuration

In productive scope XI the configuration of the alert has been presenting/displaying some problems, I believe that you can be so that in these machines it exists to cluster, because in atmospheres DES and QA this working as it corresponds.
The problem is that the message that is sent by mail is different from the mail defined in the category of alert
Subject: Alertas Runtimeworkbench (The triggering application determined you as a recipient)
Mje: Possible Subsequent Activities
but in Alert configuration
subject : Error ...&SXMS_MSG_GUID&
mje : text of description of the interface with error
bedgrats
Ximena

Hi,
Try to see the below , did yu transported correctly, dont mind , i am asking like this, plz check it ..
Q6: I moved the Alert Server to a different host. Why don't I receive any alerts anymore?
A6: In the transaction SM59 check the R/3 connection CentralMonitoringServer-XIAlerts.If it doesn't point to the new Alert Server, delete it. It will be created automatically with the correct host when the next alert is created (provided the information in the Exchange Profile has been updated).
Q7: How can I transport my Alert Categories and my Alert Rules to a different system?
A7: The Basis Alert Framework provides a menu Transport in the transaction ALRTCATDEF which allows you to create a transport request for the Alert Categories. However this works only if you have created the Alert Categories in the customizing client (c.f. the documentation of the Basis Alert Framework). For the Alert Rules you may create a transport request by runnning the report SXMSALERT_CONFIGTRANS.
Q8: I don't receive any alerts, however when I test the alert category using the report RSALERTTEST, the alert is delivered.
A8: Have a look at the ST22 for dumps created by the user XIRWBUSER stating that the permission for RFC-Calls or for the function group SXMSALERT is missing. If that is the case, you probably have to generate again the roles and profiles for the XIRWBUSER.
Q9: How can I access in a container variable the name of the system where the error occured (which caused the generation of an alert)?
A9: Implement the correction described in note #944756. After that you may use the container variable SXMS_ERRSRC_SYSNAME to display the system name in your alert category.
Q10: Why are sometimes certain error categories (e.g. SXMS_TO_ADAPTER_ERRTXT) not filled?
A10: This is due to an error in the Business Object Repository when the value of a container variable exceeds 255 characters. Please implement the correction described in note #947738.
Q11: Why do I sometimes receive two alerts when an error happens in a receiver adapter?
A11: This happens because two independant components of the Adapter Framework react simultaneously on the error. The problem will fixed with SP17.
Regards
Chilla

Yahoo mail alert configuration on Nokia 6700 Class...

I have been using 6700 classic for over a month and found the set very user friendly and handy. How ever I have two rather three issues. Can some one guide/elaborate?
1. Is it possible to use loud speaker mode while listening to radio or one can hear radio on head set only?
2. Group contact seems restricted upto 50 contacts only and max no. of contacts is 20 for bulk SMS. Is there a way out to include any no. of contacts in a group and SMS at one go to entire group as in Nokia 6630?
3. I had set up yahoo mail alert using wizard. But due to recent re-setting of GPRS by BSNL I seem to have disturbed the default phone settings for configuring to receive yahoo mails in phone mail box. Can some one indicate all settings to configure my phone again?

I have had a 6700 classic for a month and cannot receive emails on any of my accounts..bigpond, optus or yahoo??? What am I doing wrong? I have coppied my settings from Outlook Express? But the phone wont connect to the server???
Does 6700 have email ability?

Mail alert configuration at CCMS

HI All
I want to configure the backup job completed log to be mailed an alert thru CCMS . Kindly give me the configuration steps in CCMS .
Regards
Selvan , SP

Part of been a consultant / administrator is been able to read and apply documentation using you common sense... info in the link is pretty clear and give you a good idea of how its done..
Step by Step information only lead to lazzyness and wont help you to learn or to grow as a professional...
Do some testing and try it on your DEV environment until you get it right... it leads to a feeling of accomplishment!
Regards
Juan

Alert Configuration not showing up: Error 404

Hi, we engaged this issue some days now and we already checked some entries in this forum but altering doesn't show up in RWB!
So we already did:
1. Activated all services concerning Alerts (SICF)
2. added all user rules to the users in charge
3. checked notes 913858, 750287 etc.
we found sth. what we don't know if its right. When looking in exchange profile we edited the parameter com.sap.aii.rwb.server.centralmonitoring.r3.ashost in the fully qualified hostname. But when checking entries like com.sap.aii.ib.server.connect.webas.r3.ashost we only see the hostname - not fully qualified. so paremeters look like this:
com.sap.aii.rwb.server.centralmonitoring.r3.ashost = server02.domain.local
com.sap.aii.ib.server.connect.webas.r3.ashost = server02
Doesn't these parameters have to be in same structure?! So when we changed com.sap.aii.rwb.server.centralmonitoring.r3.ashost in server02 we could not sign on to RWB service with any user.
Can somebody help us on this issue?! We have to activate altering but its is not showing up in RWB at all!
br

hI,
Error: 404 Not Found
Description: The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
Possible Tips:- for HTTP_RESP_STATUS_CODE_NOT_OK 404
u2022 404 is an HTTP response code that indicates that the resource in question couldn't be found. Usually this is due to an incorrect URL, so it is better to cross check all URLs. Check pipeline URL in the SLD in the business system of the Integration Server For this go to SLD->Business System-><yourIntegrtaion Server>->Pipeline URL: It should be like this http://<host>:<port>/sap/xi/engine?type=entry Where host is the host name of the Integration Server and port is the HTTP(8xxx) port. To verify this in Integration Server you can do like this. Go to SXMB_ADM->Integration Engine Configuration->Choose Edit from Menu -> Change Global Configuration Data to switch to change mode. Then select System Landscape - Load Configuration. (This is not required always)
u2022 Check that the port really is the ICM HTTP Port and not the J2EE port i.e SMICM then menu GOTO --> SERVICES and check the port number for HTTP. It should be HTTP port
u2022 If the error is Page cannot be displayed, cannot find server in https configurations Check and correct the SSL configuration for the ABAP and the J2EE side of the system
u2022 If the error is because of integration server when using Proxy communications then check these. i.e SXMB_ADM->Integration Engine Configuration->Corresponding Integration Server enrty should be dest://<Http Integration server-Destination> Where < Http Integration server -Destination > is the RFC destination (SM59) of type HTTP connection (type H) to the Integration Server. In this case, host name, port, and path prefix are saved in the RFC destination.
Regards

Incoming messages - E-Mail Alerts for Application Errors?

Dear C4C Community,
We are integrating C4C and our SAP ERP. Sometimes the business partner replication is not working due to unmapped entries or due to other reasons. Currently we are checking the web service message monitor manually for incoming message with status "Application Error".
Is there any way to setup an automatic e-mail alert when new incoming message errors appear? I do not like the manual monitoring process.
Looking forward to your feedback.
Best Regards
Matthias

Hello Matthias,
Try checking the below questions in your project scope.
Hope this should help you achieve what you want.
Regards,
Chandan

E-Mail alerts for queues in SMQ2

Hi,
In a asynchronous IDOC->ABAP Proxy scenario, some of the messages are getting stucked in the transaction SMQ2 in PI system.This happens only when we send 100 IDOCs to PI at the same time and only 5-10 messages are getting stucked with status as "Running". The remaining messages are processed and send to the target system.
I would like to know a solution to trigger an E-mail alert to a specific Mail id if any messages gets stuck in the queue for more than 5 minutes.
Do we need to configure CCMS to achieve this? If so, please let me know the steps.
Thanks and Regards,
Sakthi

Hi Just check for
configure E-mail alerts
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2 By Aravindh Prasanna
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
XI : Configuring CCMS Monitoring for XI- Part I By Naveen Pandrangi
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II By Naveen Pandrangi
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3 by Aravindh Prasanna
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards
Abhishek

Alert Configuration / Alert Inbox - "404 Not Found" in PI 7.0

Hi ,
We are trying configure Alert Framework in PI 7.0.
When we are opening the Alert Configuration page through the link
http://<Hostname>:5<Sys.No>00/rwb/index.jsp -> Alert Configuration we are getting error " 404 Not Found"
But when we changed the exchangeProfile parameter com.sap.aii.rwb.server.centralmonitoring.httpport from 5<Sys.no>00 to 8<sys.no>0 we got the page displayed there.
But when we click that page it asks for authentication again !!!
And where we need to fix this redirection problem from 5<sys.no>00 to 8<sys.no>0 ..
the parameter -> icm/HTTP/j2ee_0
is holding this value
PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
Please suggest.
Thanks &Regards
Mrutyunjay

Could you please post the details..
We are also facing the same issue.
Thanks in Advance.
Regards
Sujan

Alert Configuration for Seeburger Adapter

Dear Team,
I would like to know an information.
For an example,If I use AS2 adapter on the sender side and File on the receiver side,Can we do the Alert Configuration in XI/PI to capture these errors ?
Warm Regards
B.Dheepa

HI
Yes you can use Alert configuration to capture the error from the adapter but the container elements will bring different output as compared to XI adapters.
Thanks
Gaurav

VIP Mail alert sounds delayed on iOS8

I have general Mail alerts enabled to display on the lock screen with no sound, but I have a sound assigned to VIP mail alerts. This worked fine on iOS 7. At work, I often have my phone sitting on my desk and have observed some odd behavior on iOS 8. What I see on the lock screen when I get an email from a VIP is an alert with no sound. The next email that comes in, regardless of who it is from, will usually get the VIP sound even though it should be silent. I'll also hear the VIP Mail alert sound randomly but infrequently for no apparent reason, usually within a few minutes of a phone reboot.
Here is how I have general Mail alerts configured:
Show in Notification Center: off
Notification Sound: None
Badge App Icon: On
Show on Lock Screen: On
Alert Style When Unlocked: Banners
Show Previews: On
Here is how I have VIP Mail alerts configured:
Show in Notification Center: off (this was actually on, I just turned it off, not sure if this will matter)
Notification Sound: Aurora
Everything else is the same as above.
I have an iPhone 6 running iOS 8.0.2. I believe I also saw this on my iPhone 5 with iOS 8 and 8.0.2 before I got my new phone.
Thanks,
Nathan

My VIP alert notifications and alert sounds on my iPhone now happen about 15-20 minutes after emails arrive on my Mac desktop for most of my email accounts. VIP emails coming into my email accounts that allow push notifications show alerts immediately though. This used to work fine - maybe the problem started happening after iOS 8 was installed. Problem only seems to happen when phone screen is locked.
iPhone 5 on iOS 8.1

PI 7.0 Alert Configuration Problem BSP Page Error

Hello,
We are facing the issues for the alert configuration tab in Runtime workbench for PI 7.0.
We have added the fully qualified domain name in exchange profile and 8000 port is also updated for RWB.
We have activated all the SICF services by the report
RSXMB_ACTIVATE_ICF_SERVICES and all the services are activated successfully.
But still When we click on Alert configuration we can see the page but we when we try for
any function, its giving the following error.
Error log is:
Access via 'NULL' object reference not possible.
the termination type was : RABAX_STATE
http://s71cam.corp.wrgrace.com:8000/sap/bc/bsp/sap/sxms_alertrules/main.do was not called due to error
Also in ST22 I can find the following dump:
Dump:     OBJECTS_OBJREF_NOT_ASSIGNED
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Please help.

Hi deepak
follow these sap notes
Note 771317 - BSP call terminates with RABAX_STATE
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=771317
Note 992800 - "RABAX_STATE" dump is coming while paging
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=992800
Note 643933 - RABAX_STATE: Conversion overflow
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=643933
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rabax_state&cat=sdn_all
thanks
sandeep
if hepful rewartd points

Mails are not comming when error in Moni after alert configuration

Hi PI Team,
I want a Scenario Where if i get any Error for my Business Service i need an Mail to be triggered.
Can any one suggest will it be better to use BPM for this. If so what are the steps for that?
I had done all the Steps specified in the following blogs for Alert Configuration.
/people/srinivasurao.sandaka/blog/2009/05/23/central-alert-management-for-pi
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
I had done all the steps and when i get an message mapping error.
I am not able to get mails, but able to see the error in RZ20 under my specific namespace.
please suggest me.
Thanks & Regards,
Sriram

Hi,
Can you check the ALERTInbox if you have subscribed the alert category.
Refer
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
XI: Alerts - Troubleshooting guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Thanks
Swarup

Error while opening Alert Configuration

Dear All,
When I am trying to open Alert Configuration from RWB then it is giving me the following error:
URL http://sapxiprd.nissap.com:8000/sap/bc/bsp/sap/alertinbox/index.htm call was terminated because the corresponding service is not available.
Note:
The termination occurred in system XPR with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:SAPXIPRD_XPR_00-v:0-s:403-r:Forbidden

Kindly help me what is the error and how this can be resolved.
Warm Regards,
N.Jain

Hi,
Go to Transaction SICF and check for the activeness of Service called /bc/bsp/sap/alertinbox.. if not make it active.
Also check this SAP note: -517484
Hope this helps,
rgds,
Moorthy

ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS

Hi,
I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
Please suggest how to do it......
Regards,
Sriparna

Can anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
error.Other than alert rule can we configure this.
Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
Can you please help with how do I create this rule specific to File Adapters only ?
Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
Regards,
Abhishek.

Alert Configuration and Alert inbox showing error

I have activated all services in SICF which are related to alert configuration and changed the HTTP ABAP port according the note 750287
com.sap.aii.rwb.server.centralmonitoring.httpport to the HTTP port number mentioned in SMICM -> goto -> services -> HTTP port number.
This is error i am facing after chaning the port number in Exchange profile and activated and refreshed all cache using
you can also try to reset just ine case:
a) the RWB
http://<J2EE-Host>:<HTTP-Port>/rwb/rtc?op=init
b) exchange profile
http://<J2EE-Host>:<J2EE-Port>//rep/support/admin/index.html
Repository, Directory, Runtime
(All properties -> Refresh )
Call of URL http://Hostname:8001/sap/bc/bsp/sap/alertinbox/index.htm terminated due to error in logon data.
what are the changes expected to do..
Regards,
Govada.

> I have activated all services in SICF which are
> related to alert configuration and changed the HTTP
> ABAP port according the note 750287
This is perfect.
>
> com.sap.aii.rwb.server.centralmonitoring.httpport to
> the HTTP port number mentioned in SMICM -> goto ->
> services -> HTTP port number.
This is again correct.
>
> This is error i am facing after chaning the port
> number in Exchange profile and activated and
> refreshed all cache using
>
> you can also try to reset just ine case:
> a) the RWB
> http://<J2EE-Host>:<HTTP-Port>/rwb/rtc?op=init
This is wrong. Try to reset using the J2EE port.
> b) exchange profile
> http://<J2EE-Host>:<J2EE-Port>//rep/support/admin/inde
> x.html
> Repository, Directory, Runtime
> (All properties -> Refresh )
This is correct as well.
Correct the wrong step, by giving the correct URL and then try again.
Regards
Bhavesh

E-Mail Alerts Configuration in PI ... BSP error

Similar Messages

Maybe you are looking for