E-mail Notification Setup

Please help. I'm trying to set up the Notification Method in Entreprise Manager 10g Database Control.
I wish to send DB notifications via internet to a Hotmail e-mail address.
1. Is this possible ?
2. Which value should I provide for E-MAIL(SMTP)SERVER ?
I'm running Oracle10g (10.1.0.2.0) on Windows XP
Cheers
Heli

E-mail notification has been made more easy in 10g bu the in troduction of UTL_MAIL
refer to [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#ARPLS384]
[http://download.oracle.com/docs/cd/B19306_01/server.102/b25166/cfrulset.htm#BABFIEEI]
[http://vasudevank.blog.co.in/2008/09/02/oracle-utl_mail/]
HTH
Anand

Similar Messages

Mail Notification Setup in Oracle Application on OAF Page Failure

Hi,
I have a requirement to setup the Mail Notification on any kind of error comes on OAF Page. Have any one configure such kind of setup ever?
Please help me. Any kind of help would be highly appreciated.
Thanks
Renu

Thnaks for your prompt reply, sumit.
Our problem is not concerned with a particular OAF Page. We want that if any OAF page gives error , then an email notification should be sent to the system administrator, specifying the error details.
Is this possible and how we can do it?
Thanks ,
Renu

E5 weird e-mail notifications

For those who have setup their home screen to anything different than "Active" and have the mail notification setup on the home screen, but don't get any sound and/or vibration - the problem is that sound and vibration will be played only for the 2 mailboxes setup in the "Active" standby mode, no matter which one you are currently using. If for example you want to use the "Contacts bar" mode and have sound/vibration for your e-mails, you must first switch to "Active" mode, set your account on the home screen, then switch back to "Contacts bar" and set it there also. I lost so much time to setup mail accounts, reset the phone several times etc. until I found this. I am so tired of Nokia and their latest "smart" phones...

Hi;
There is no logic as you describe in the Notifications, it will send every submission to the collaborators set up for Notifications.
Thanks,
Josh

Setup E-mail notification in Oracle 10g Database

Friends ,
I want to set E-mail notification in my Database(Oracle 10g Database) . So that If any major issues are occured , then a mail is recieved in my mailbox .
I set the mail server gateway address (like server.xyz.com as well as IP '74.52.97.226' of mail server) , but it cannot recognize the server . But I can ping that server easily .
When I press "Test Mail Server" then it shows the error :
"74.52.97.226: Test failed with message: "Could not connect to SMTP host: 74.52.97.226, port: 25; nested exception is: java.net.SocketException: Software caused connection abort: connect"
Now plz tell me, How can I set the E-mail Notification in my database ?

E-mail notification has been made more easy in 10g bu the in troduction of UTL_MAIL
refer to [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#ARPLS384]
[http://download.oracle.com/docs/cd/B19306_01/server.102/b25166/cfrulset.htm#BABFIEEI]
[http://vasudevank.blog.co.in/2008/09/02/oracle-utl_mail/]
HTH
Anand

How do I just get the Inbox messages to show in the new mail notification?

I've setup Thunderbird with Gmail and it works like a charm. The only gripe I have is that the new mail notification seems to grab a selection of unread emails from different folders and often it's not showing the relevant new emails in my inbox. Esp. the All Mail folder seems to cause doubling of message notifications but it's not the only one .
All I'm interested in is my inbox for new mail notifications. Is there anyway to modify the current behaviour?

That's not true. If you archive an email from your inbox without labelling it it will simply remove the inbox label and then the only way to get to it is through All Mail.
Note that All Mail is not only folder that has this issue. If you auto-label a message with 2 or more labels the exact same problem occurs.

Mail notifications not working correctly on iPhone 5

On my new iPhone 5 I have mail notifications set up as on in the notification center, alert style is banners, badge app icon is on and show preview is on, view in lock screen is off. It is set up the same way as when I had an iPhone 4. However, when I get a new email and the phone's screen is not on, the next time I turn it on I will not get the banner alert, all I see is the badge icon. This is kind of annoying as I would like to see the banner to know who the email is from before going into the mail app.
The notifications for mail on my iPad running iOS 6 just like my iPhone 5 are set up the same way and work correctly.
Why would they not be working correctly on my iPhone 5?

Roshanalex
I have tried what you are saying and all the above, I don't think you understand what we are saying is happening to us because you probably never used or use it. We understand that you can see the notification by pulling down the notification tab from the top of the screen but in the past for example on my ipad and iphone 4 it would show you a preview banner of your emails you have received for the day had you not unlocked your phone for any given amount of time and given you did receive any emails the next time you unlocked your phone it would bring up top of the screen a preview of each email you had in your inbox automatically one by one in the banners without having to go to the notification pull down. It is a bug because I guarntee if you turned it on you wouldn't see what were talkin about either and you wouldn't if you've never were setup for that intention either.

ICal Server mail notification generates malformed Reply-To header

When a mail notification (invitation) for an event is sent by iCal Server running on Snow Leopard Server to an outside email address, an apparently malformed "Reply-To" header similar to
[email protected]
is always inserted into the message. As the above address is not a valid one, the recipient is unable to reply to the event invitation. The "From" and "Return-Path" headers always indicate the correct email address "[email protected]".
Has anyone encountered this issue, or more importantly, know of a solution?

Remember - email addresses are technically only the @domain.com address. The suffix information is only a user of that domain.
ALL email sent regardless of who or how it is addressed before the @ is technically irrelevant to the end client (outlook, thunderbird, etc..)
Email is really only a DNS operation. The @domain.com is resolved somewhere in the cloud (no one really wants a boring DNS resolution lesson here....) to your domain server. In your public DNS records there are MX records which tell anyone trying to send email to your DOMAIN (not users) what mail servers you have, where they can be located, and in what priority they are used (if multiple mail servers are used.)
Once the email finds its way to your email server, it internally resolves the info before the @ to it's user directory (AD, OD, whatever) and then the mail server processes the message and sends it along to the user if it validates. But it still arrives at your mail server regardless if it is correct or not.
You can try this test yourself... (as long as copy all undeliverable mail to: is enabled in your server admin)
Send an email to some made up email address... [email protected].
It will still be resolved to your email server and "delivered" to your "copy undeliverable email to:" address. Even though it is not a valid user of your domain.
So, what does all that crap have to do with the topic? When you hit reply to an third party ical invite (because internal ical users don't use email for invites) - everything in front of the @domain.com is irrelevant in the reply process. And this applies to all email clients. The message is resolved and sent back to your @domain.com email server. So when you see the icalserver+blah blah blah [email protected] it is a correct address and all email clients only see the info after the @ for routing and send it to your email server.
It is once it hits the Mac Server does the magic happen. In the setup of ical, you specify an ical email address for this specific third party email invite function. Hence, the [email protected] address.
Mac email server has built in support for sub-addressing and this is where everything AFTER the "+" is resolved internally in the ical server.app. iCal uses this information to process the invite.
So, in closing... it has to be a Mac server for this function to work.
Hope I didn't stray to far from your question.
Scott

Mail Notification Options

I am trying to find some different mail notification options for Mac Mail and can't seem to come across anything (good). I run my business email through Mac Mail and would like to know when I get email from those accounts. The prefs only give you the option for a sound for ALL mail, I could careless most times about personal email, I just need to know when I get business mail...by a different sound or a mail posting message or something that comes up when my screen savers is on, saying I have mail from the business account.
Does anyone have any thoughts or ideas on how to make specific mailboxes give you specific notifications when you get/receive mail in them?
I hope this makes sense.
Thanks!
Mike

Hi Michael,
In Mail preferences -> Rules I have the following setup for example:
You could change the condition to be 'Account = Your Business Mail account' for instance (and remove the part about moving and re-colouring the message obviously )

E-mail SMTP setup

Hi,
I´m getting the following error when I try to send an e-mail through the e-mail Notification´s functionality: u201CCannot send this email, the SMTP setup is not complete or the sender´s email address is not Readyu201D.
I've set up the variables related to the SMTP mail settings at the AppSet Parameters: SMTPAUTH, SMTPPASSWORD, SMTPPORT, SMTPSERVER and SMTPUSER
I have tried options 0,1 and 2 in SMTPAUTH.
I have tried smtp server ip and smtp server name in SMTPSERVER.
SMTPPORT: Default (25)
Checks already done:
          - I have already checked that the email address with the user and password given is working properly independently from SAP BPC.
         - Doing Ping / Telnet from the server of SAP BPC to check/review that there is some kind of answer from the email server through the port 25 and there are no firewalls restricting it.
          - The sender´s e-mail address is correct
Version: SAP BPC 7.1 - SQL
Thanks.
Best regards,
Fernando.

Hi,
Thanks, the problem is solved.
The problem was that the receiver´s e-mail must be written in the
security - user details and I was writing it directly in "to" option of
E-mail notification
Best regards,
Fernando.

Error Log and Mail Notification for WMTA Output

Hi Experts,
We are using WMTA output for creation of Transfer Orders for Outbound Deliveries. If the TO creation has failed or Partially successful also, WMTA output NOT showing any Log on reason for failure. I see log creation active for Output type, still no log is displayed. Can you please help me to overcome this issue?
In case if TO is created for Partial Quantity (say TO created for 25 PC against delivery quantity of 40 PC), output status shows green and doesn't display any log. Setup the mail control as given in Note 1756674 - WMTA output shows as processed but no transfer order was created. Still no mail notification is triggered for the error
Any inputs in this regard are highly appreciated
Thank you,
Surya

Hi Surya
Could you please check the setting for "Do not write processing log" as highlighted in the below screen

Charm:multiple recipients for mail notification

Hi Experts,
I'm using Charm and I configured the mail notification when a new change request is created.
I would know if Is it possible to setup multiple e-mail addresses for the mail notification.
I follow these steps:
- transaction BP
- selected the specific BP
- selected the tab page "Address"
- selected the field "E-Mail"
- selected the button "Other E-Mail adresses (Available)"
- put three mail adresses
Now if I send the mail notifaction to this BP the mail is send only to one user.
Can any one help me to resolve this issue?
thanks in advance
regards
gio'

Hi Jason,
I have created the shared distribution list in the solution manager but when I try to put It in the field "E-mail" in the BP the following error appear:
E-Mail format not valid
It seems that It's not possible to insert the distribution list in the E-Mail field of the BP.
Any other idea?
Thanks in advance for collaboration
regards
gio'

Mail Notification Dinging twice iOS 8

I have noticed that in iOS 8, my mail notification dings 2x. Once when the phone is locked and then again when I unlock the phone. In iOS 7, the notifications were setup the same as iOS 8, though the sound was not listed in the "overview" even though it was set to "ding". Now in iOS 8, the sound notification is listed and it dings 2x. In iOS 7, I would get a ding for a new mail message when the phone was locked and when I unlocked it, the banner would show at the top but would not ding a second time. This is not the same behavior in iOS 8. Has anyone else noticed this?

I have the exact same issue, Very annoying. I hate hearing the sound twice making me think that i just received another email. It only happened after i upgraded my 5 to iOS 8. I hope they find a fix for it soon

Groupwise and E-mail notification

I have to setup an e-mail notification system. the campus use groupwise as email server. I tried the example E-mail Notification but got the following error:
LabVIEW: (Hex 0x4074) 500 Syntax error, command unrecognized. For example, the command line might be too long.
Any clue ?
Olivier

That 500's coming from your SMTP server.
Need a CRLF at the end? Comma-, semicolon-, or tab-delimited string (if applicable)?
SMTP relay installed and configured on the server?

Losing New Mail Notification after send/receive

Hello,
I have a Treo 800w with WM6.1. Experienced same problem also with HTC Mogul on WM6.0.
My yahoo email and work exchange email are setup via IMAP. The new mail notification works when a new message is received. However, upon the next send/receive, even if the message has not been viewed, the new mail icon and notification goes away. As a result, I cannot utilize any reminder feature, even third party that will work past the duration of my send/receive interval. Does any fix exist for this?
Thanks for your help
Post relates to: Treo 800w (Sprint)

Mail only shows a flag in the Dock for new mail when it arrives in the Inbox; you can't get around this. But you can add this functionality to ALL mailboxes if you download and install this item:
http://www.macupdate.com/download.php/13292/MailEnhancer-10_3.dmg
Be sure to follow the directions and it should work without a problem.
Mulder

Workflow Mailer Notification Configuration...

I am new to Oracle Workflow ,Can anyone provide me with the steps to configure Workflow Mailer Notification ? I have already referred to some metalink notes but they are not proving to be of much help.

Please review the following notes, it should be helpful:
Note: 164871.1 - Configuring the Workflow Notification Mailer in Oracle Applications Manager 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164871.1
Note: 279166.1 - Oracle Workflow Cartridge Workflow Information Data Collection Test
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=279166.1
Note: 234436.1 - How-To Setup Workflow Mailer in an Oracle Applications 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=234436.1

E-mail Notification Setup

Similar Messages

Maybe you are looking for