E-recruiting : Pre-requisite for using the report HRALXSYNC

what data must be present for an EMPLOYEE in order to use this report.
Regards,
Bharat

Hello Bharat,
running HRALXSYNC requires not much data for the employee. IT 0000, 0001, 0002 and 0105 subtype 0010 should be maintained. These infotypes are usually maintained after hiring action.
More important to successfully run the report is setting up the full integration of e-recruiting to HR. This has shown much more difficult and much more effort on the systems I had to do it.
Best regards
Roman Weise

Similar Messages

  • Pre-requisites for using the Ajax in Portal

    Hi ,
    we are using the SAP Portal 7.01 on level SP 7. What is the prerequisite for using the Ajax frame work in sap portal. Is my current version which we are using is sufficient or need to upgrade to some other version. If the current version is sufficient to use the Ajax frame work, provide the steps for configuring the Ajax.
    Please reply to this
    Thanks

    Hi,
    Now regarding the activation of AFP, you have the do the following steps:
    - System Administration - > Portal Display -> Desktop & Display Rules
    - Open the rule collection from Master Rule Collection
    - Add IF expression with suitable user/group .
    - From the content catalog, navigate to portal content -> every user -> Standard portal users ->
      defaultAjaxFrameworkContent -> Ajax portal Desktop and add this to THEN expression.
    - Apply & Save.
    Now you will be able to use the AFP on your portal.
    Hope it is useful.
    Regards,
    Nishant Singh

  • Pre Requisites for Implementing the CUE

    Hi,
    I have an  IP Telephony set up with CME in 2 different branches.We need to implemet the AA in sites.
    What are the pre requisites for hardware and license based  that need to check before implementing the CUE.
    one site having cisco 2911 router with Version 15.2(2)T3 and with interface ISM module is present which would like to configure for the AA.
    second site having 2901 with Version 15.0(1r)M16 and  with interface Embedded-Service-Engine0/0.
    Attached is the Show tech support for each CME's .
    Thanks in advance
    Nithin Louis.

    Hello
    if there is no module installed you can completely ignore Embedded-Services-Engine as it won't be doing anything. Embedded Service Engine
    Overview:-
    Cisco Integrated Services Routers Generation 2 (Cisco ISRs G2) have dual  core CPUs on the motherboard. The first core runs Cisco IOS software as  Cisco Integrated Services Routers (ISRs) do; the second core, or the Embedded Service Engine, is capable of running Linux-based applications.
    The following Cisco ISR G2 platforms support the Embedded Service Engine:
    •Cisco 2911
    •Cisco 2921
    •Cisco 2951
    •Cisco 3925
    •Cisco 3945
    Note:- As above 2901 not support embedded service engine . May be you got it on the CLI , because you run the same S/W version.Reference 
    https://supportforums.cisco.com/discussion/11184226/interface-embedded-service-engine00
    *That is why i did not mention for Embededd service engine module supportedwith Cisco 2901, so kindly check. The above post Cisco document for compatibality.If you need to try , so try with minumum memory 1G as 2911
    Memory required for 2911,2921 is 1G , 2951 is 1.5 G , 39XX is 2.5 G.My advise to you to go through  ISM-SRE-300-K9 , and shut Embedded service engine .
    Thanks
    please rate all useful information

  • Is the Profit Center a pre-requisite for activating the New GL?

    We are currently using the Classic General Ledger in the ECC 6.0 and looking into activating the New General Ledger. However, we are not using the Profit Center. Can anyone help me if we can activate the new General Ledger without activating the Profit Center?
    Thanks

    Nope - that is incorrect information - there are many benefits to new GL. However turning on new GL and not using PC are not connected to each other. PC is activated in case if you genuinely feel the need to report Profits/revenues across a PC.

  • What are the pre requisites for E-Recruitment module?

    Hi all,
    What are the pre requisites for implementing E-Recruitment module ?
    Does it require Hr module or as stand alone it can work?
    Regards.
    Rajendra

    Thanks Aniket
    Will the following configuration work as e-recruitment stand alone mode.
    WAS with ABAP stack + E-Recruting 6.0 sp + Java stack + Portal + ESS MSS Business package ( for e recruiting).
    Regards
    Rajendra

  • Hi All,Pre-requisite of using FOR ALL ENTRIES

    Hi All,
             What are the Pre-requisite of using FOR ALL ENTRIES in the select statement .pls its Urgent .
    thanks&regards.
    Bharat

    hi,
    For using for all entries in below statement for all entries in itab_mara it will retrieve record corresponding fields of table itab_marc.
    In this case if we have duplicate records in mara .For that also it will retrieve the value in itab_marc.
    select matnr erdat from table itab_mara where matnr in s_matnr.
    if not itab_mara is initial.
    select matnr werks from table itab_marc for all entries of table itab_mara
                                                          where werks in s_werks and
                                                                    matnr in s_matnr.
    Reward with points if helpful.

  • What are the pre requisites for implementing ChaRM

    Hi
    We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
    Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
    Thanks & Regards
    Anand

    The listed pre-requisites for the implementation of ChaRM are;
    1.  Already completed the basic configuraiton of SAP Solution Manager
    2.  You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
    3.  you have setup business partners for the users (or at least 1)
    4.  satellite systems are at the minimum  support package level required (note 907768)
    5.  connections are available to the satelite systems
    6.  CTS+ if you wish to control non ABAP change requests through ChaRM

  • What are the pre requisites for SPLIT VALUATION OF A MATERIALS

    Dear friends
    What are the pre requisites for creating SPLIT VALUATION for  A MATERIAL in particular Plant
    regards
    Radha

    Hi,
    I am not sure what you mean exactly.
    But you would need to have the valuation category and all of the valuation types created in config in advance.
    Then you can allocate the appropriate valuation category to the material (accounting view) (as long as no stock or open POs etc. exist).
    then you can create your additional accounting views (one for each valuation type that you want to use).
    Steve B

  • What are the pre-requisites for learning OA Framework?

    Hi,
    Im new to oaf,can any body help on this
    What are the pre-requisites for learning OA Framework?
    Karthik

    In order to develop any OAF Application you need to know few concepts before doing any kind of development. The concepts are basically the Business Components for Java(BC4J) components.
    They are:
    Application Module(AM)
    Entity Object(EO)
    View Object(VO)
    Association Object(AO)
    View Link(VL)
    Now let us see the description of each component.
    Application Module:
    Application Modules serve as a containers for related BC4J components. The pages are related by participating in the same task. It also defines the logical data model and business methods needed.They provide the transaction context and also used for establishing database connection. AM’s can be nested to provide more complex AM’s.
    Entity Object:
    EO encapsulates the business logic and rules.EO’s are used for Inserting,Updating and Deleting data. This is used for validating across the applications. We can also link to other EO’s and create a Association object.
    View Object:
    View object encapsulates the database query. It is used for selecting data. It provides iteration over a query result set.VO’s are primarily based on Eo’s. It can be used on multiple EO’s if the UI is for update. It provides a single point of contact for getting and setting entity object values. It can be linked together to form View Links.
    Association Object:
    An association object is created where we link EO’s. For example take the search page where we link the same EO to form a association between the manager and employee. Every employee should have a manager associated. But if it President then no there is no manager associated. This is a perfect example to understand the AO.
    View Link:
    A view link is an active link between view links. A view link can be created by providing the source and destination views and source and destination attributes. There are two modes of View link operation that can be performed. A document and Master/Detail operation.
    -----Let me know if you need more information
    Regards
    Meher Irk
    Edited by: Meher Irk on Oct 23, 2010 10:45 AM

  • Pre-requisites for running report for P45 RPCP45GN

    Hi,
    We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
    Regards
    Nimmi

    Hi,
    The following are Pre-requisites for RPCP45GN in new year legal changes:
    1> The starter report RPUEFO_STARTER should be run before running the    leaver report RPCP45GN.
    2> Last payroll should be run for that perner.
    3> The actions must performed e.g. leaver, payroll area changed, etc.
    4> Infotype 65 should be correct maintained.
    5> Address infotype 6 should be maintained for the perner.
    Hope this could solve your problem.
    Regards
    Roop

  • What are the pre-requisite for JAVA Proxy communication?

    What are the pre-requisite for JAVA Proxy communication?

    Hi,
    You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
    The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
    To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
    ·        Proxy classes that send or receive messages using the Java proxy runtime.
    ·        Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
    The classes must be deployed on the J2EE server together with their J2EE application
    see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

  • ADFS2012R2 Install: Why does this need Active Directory Domain Admin Account as one of the pre requisites for installating AD FS server

    Team,
    We were trying to configure AD FS through ADFS Wizard on Windows 2012 R2 box as part of ADFS upgrade from ADFS 2.0 to ADFS 3.0. But the installation got stuck in between as the domain account which we were using does not have admin privileges on the AD side. 
    We have to raise to AD team to elevate the rights of the service accountb we are using.
    Can any one please tell me why having an admin AD account is pre requisite for the AD FS configuration, what are the "Write" changes which occur at Active Directory side post ADFS installtion, we need this details to supply to AD team for the justification
    purpose.
    Would appreciate any detailed response on this query
    thanks
    Lav

    Hi,
    dont know all exact objects ADFS is trying to create in AD, but it needs to create some container and objects under cn=Programm Data,DC=domain,dc=com for sharing certificates.
    We had troube with this because the container does'nt exists.
    Regards
    Peter
    Peter Stapf - ExpertCircle GmbH - My blog:
    JustIDM.wordpress.com

  • Using the Bursting engine for scheduling the Reports

    Hi,
    Can we use the Bursting Engine for scheduling the reports? For example I want to run a report in a scheduled time and send the mail to destination. We can do these things in the XML Publisher console. But we need to find any other way to schedule a report.
    Thx,
    Vijay.

    I am looking for the same thing.
    I believe the APIs are entirely separate from the functionality in the BIP web application. So that there is no way to programmatically initiate the scheduling of a report/template already defined in the UI via a command line or API call. Is this accurate?
    I sort of expected the APIs to have functionality that exposed the features of the web application, as opposed to just exposing the base functionality/engine of BIP.

  • What are the pre requisites for SAP SRM7.0  DB Rrefresh?

    Hi,
    What are the pre requisites for SRM DB Rrefresh?
    Thanks

    Hello Peter,
    When it comes to DB refresh you need to know what all the client dependent data which needs to be retained.
    For example you need  RFC connections, Variants, User master etc.
    As a pre task of Database refresh you may need to export the tables which are related to this so that once the database is refreshed you need to import them.
    Ensure the proper backup of production database is available. Also check all the STMS configurations which need to be retained again.
    Make sure that you need to have enough disk space which can accommodate your production data in to the pre production system.
    These are some of the general consideration one needs to have but again it depends on the environment on which one runs SAP systems.
    Regards
    Vivek

  • What are the pre-requisite for ABAP Proxy communication?

    What are the pre-requisite for ABAP Proxy communication?

    hi,
    How to create proxy.
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
    How to Activate Proxy.
    /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Server Proxies (Inbound Proxy)
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    OutBound Proxy (Client Proxy)
    /people/sravya.talanki2/blog/2006/07/28/smarter-approach-for-coding-abap-proxies
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
    File to R/3 via ABAP Proxy with good example
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    Debug your inbound ABAP Proxy implementation
    /people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
    http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
    Synchronous Proxies:
    Outbound Synchronous Proxy
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
    Inbound Synchronous Proxy
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
    regards
    srinivasreddy

Maybe you are looking for

  • Login as sys delay

    Dear all, Oracle 11g on sun solaris 10 Login as sqlplus sys/oracle as sysdba takes a lot of time to login where as normal users can be able to login immediately including user system.Please atleast give me a hint to troubleshoot this. Kai

  • Fails to upload song and starts back at Step 1

    I just added two songs to iTunes. They are long songs (60 minutes long) and are about 150 MB each. (The iTunes Match limit per song is 200 MB.) I added them to iTunes, and when Match tried to upload them (because it couldn't find a match) it uploaded

  • Finding nemo removed from itunes store again??

    I noticed Finding Nemo was available on december 4th. I went today to purchase and it was removed from itunes/not avaialbe & did not show up when searched. Why did this take place? Thanks, B

  • I'm using a trial version but i don't find the spiral tool

    I'm using a trial version but i don't find the spiral tool

  • Samsung 56" - 5 years old has no sound out of the blue

    Hello. I am wondering if anyone has had this issue.  I checked the archives and do not see anything regarding sound. It was working fine last night. Today, no sound but perfect picture. We checked all of the plugs, outlets, etc. everything is fine. H