E-Recruitment - Manager create requisition
Hi all,
I got a problem when saving a requisition request in MSS as below:
the assignment of IT0105 already maintained. Any idea of it ?
The employee number for the Hiring Manager is required.
Message no. HRWPC_EREC013
Diagnosis
The personnel number for the Hiring Manager is a required field for the form.
System Response
The form will not be submitted without this data.
Procedure
The personnel number for the Hiring Manager is automatically derived from the system ID of the user who is assumed to be the Hiring Manager. Check that the COmmunications Infotype (IT0105) system user mapping for the Hiring Manager's personnel number is set up correctly.
Check the workflow assignment - the following 2 notes may help here
865439 ERP2004: Recruitment Officer dropdown restricted
949625 ERP: MSS E-Recruiting new standard workf. templates.
Did you also check that the IT105 maintained for the person is correct for that of which you are using as manager?
Similar Messages
-
E-Recruiting Management Involvement -- Requisition overview
In Requisition Overview how we add / remove columns from display. My ESS/MSS friend it is no possible in iView. I look at POWL, but there is materials in SAP Help.
Can yo tell me how you did it or show me where I can learn.Hi,
What do you mean by Requisition Overview? Do you use BSP or WD?
Regards
Nicole -
Recruiter & Manager communication based on Requisition (no employee assigned)
Dear All,
Using create requisition request process, a requisition is created after required approvals, then Support Team member can see it under "My draft Requisition" POWL in recruiter's dashboard and further work on it.
My question is:
Recruiter launched the requisition from dashboard's POWL and found that some information is missing / required from request manager. how can he/she request such information from hiring manager?
Is there any activity which we can use based on requisition?
chohanDear Nicole,
Sorry for writing "No employee assigned", I meant "No candidate assigned" in heading.
As per my information activities are only possible if the candidate is assigned to a requisition.
but my requirement is to communicate with requesting manager only based on requisition (no candidate assigned).
Can we initiate activities only based on requisition?
Chohan. -
Problem in Create Requisition Request E-recruitment
Hi,
I have configured the standard workflow WS45600028 for the E-recruitment process in HR administration services and able to trigger the workflow successfully when I create requisition in the portal.
But the workflow fails at the first step 'Import the form data' since the method CL_HRASR00_WF_COMPONENTS-->DATAMAPPING)raises an exception when there are no entries in table T5ASRSCENARIOS.
The case configuration is absolutely fine but yet am unable to figure out why any entries aren't created in the table T5ASRSCENARIOS.
How the first entries are created in table T5ASRSCENARIOS? Is it through customising?
Quick response will be highly appreciated.
Thanks,
RoopeshInputs will be highly appreciated.
Thanks,
Roopesh -
Job is missing for the Position while creating Requisition in E-recruitment
Hi Gurus,
I have a situation when I create new job requisition on the ESS. When I select the vacant position while creating requisition, the org unit text box is populated automatically but not the Job text box. The is relationship between Position - Org unit and Position - Job is maintained in SAP recruitment system. can anyone help me get the Job Text box also filled just as Org Unit text box.
Thank youThere is a note 1818432 for this issue.
-
Problem in MSS - Create Requisition
Hi All,
We implementing E Recruitment on EHP4 sp4. we are facing a strange issue in the MSS-Create requisition request scenario.
We are using standard HCM process HR_MSSRCF_REQUISITION.
MSS user is able to create a requisition and send to his manager for approval. His manager can also approve it. But once the requisition is finally approved, the recruiter cannot see
the requisition in the recruiter dashboard
We have checked the workflow log, its finishing without errors.The e-rec infotype table HRP5131 does not have any new entries for Otype NB, But Manager can see his requisitions from MSS-Requisition Overview iview as completed.
Pls let me know if any config is missing? Do we need to run any background job to update the e-rec tables? There's no error message in any stage of process..still recruiters can't see the new requisition.
Regards,
SmitDear Smit,
We are implementing E-recruitment in our Project. We are facing problems with Manger creating requisition page. Its always displaying NO data available.
Can you please let us know if any configuration is to be done for it?
Thanks a lot in advance,
Regards,
Sai -
Process group R001 does not exist in MSS for Create Requisition Request.
Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.
-
E-REC EHP5 - Prerequisites for MSS user for Create Requisition request
We are implementing E-REC EHP5. As a MSS user when line manager tries to create requisition request on portal, although it takes on a new page called "Stat Processes" we are getting error "no data available" and hence can not proceed on that page. We have assigned R3 role "SAP_RCF_REQUISITION_REQUESTER" to the line manager and on portal we have assigned him MSS user role.
Is there any other prerequisite for the said functionality of Create Requisition request.Hi,
In the IMG, navigate to :
Personnel Management -> HR Administrative Services -> Configuration of Forms/Processes -> Process Configuration
-> IMG activity "Test Process"
Enter the process name "HR_MSSRCF_REQUISITION" and execute (F8). You should see the form scenario data in table view. Use the F4 help in the "Field Value" column for those entries where the "Value Help" column is checked. You should get a pop-up with the field values. If not you need to make sure that HR_MSSRCF_REQUISITION iis linked to form scenario S_HRMSSRCF_REQUISITION in table T5ASRPRSCFORM. Also make sure that you have the last SP for the ERP common parts BP 1.51 installed in your portal. Finally assign role SAP_RCF_RECRUITER_ERC_CI_2 and SAP_RCF_MANAGER to your recruiter.
Hope it helps,
Kind Regards
Christine -
Create Requisition Request - MSS (Start Process Grey Out-No Data available)
Hello All
We are using SRQ2 extended requesition request. Currentlt i am on Devlopment system and just want to see the standard requistion request from MSS so that later i can make a Z copy and customize
Now when i logged in as a Manager and click on the "Create Requisition Request" from recruiting role it's opening and showing me the Start Process window and everything is non editable and showing me that No Data Avaialble
Is there any config missing for this
Also when is see the SRQ2 from SPRO "Define Own Scenarios for Request to Change Master Data" node i made the SRQ2 application as H and aslo tried. But nothing useful.
Can any one tell me any configuration missing or any other thingsSolved.
Problem was in MSS the Ehp4 links for erecruiting refers to SRQ3. So i had to pull the iviews from MSS 1.31 BP which will be Webdynpro Java -
Process group R001 does not exist in MSS for Create Requisition
Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we have Create Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.A "Process Group" is part of HCM Processes and Forms....it is how you define which processes can be started/initiated by which Processor Roles. This is done under the configuration under HCM Processes and Forms which is within "HR Administrative Services" (HRAS). In your case, the "manager" processor role would have that process available as part of their process group. Check there.
-
E-Recruiting -- Management Involvement
I create new requisition in MSS (Management Involvement). I put another name in recruiter. When I log that name as recruiter, I do not see requisition? I check roles and authorization, it is correct.
When I create requisition that role and put manager name, I see that requisition when log as manager.Hi,
I think the work flow from MSS ( meaning manager) is not properly routed.
check the workflow and the routing of requisition to the proper role ( recruiter) even there are chances it may go to different roles may be restricted recruiter or at the team level please check this and also see whether the id is generating and going to right channel.
regards -
Process group R001 does not exist Error in MSS in Create Requisition Reques
Hi All
In MSS Under Recruiting we have a link called Requisition Request under this we haveCreate Requisition Request.
On clicking on this link Create Requisition Request link
i am getting "Process group R001 does not exist "
Pls provide me your input
Regards
Karthi D.Hi
Any updates on this
Regards
Karthi D. -
Error in MSS-Create Requisition Request, form ISR_MSSRCF_SRQ3
Hi,
We are trying to configure MSS app, create requisition request using standard adobe form ISR_MSSRCF_SRQ3.
We have configured standard HCM process HR_MSSRCF_REQUISITION for it. When entering all
the mandatory fields in the form and clicking on 'check and send' , it displays an error
"you must enter a requisition title'
although we have already entered req. title in the field.
Anyone faced this issue before?
Please provide your inputs...
regards,
SmitHello smit ,
You can find out the enhancement ( BADI defnition ) that corresponds to MSS Requisition request .
Debugging the same will let you know why the error is coming .
You could also be due to config done under MSS -> recruitment.
hope this helps.
thanks,sahiba -
How to hide "Create Requisition Request" link in MSS
Hi All
How to hide "Create Requisition Request" link which is in Recruiting services in MSS?
Rgrds
SriHello,
Create Requisition Request is triggered by Home Page framework service MSS_HCM_RECRUITING_NEWREQ_REQUEST.
In order to deactivate it, in customizing:
SPRO-IMG:
Cross-Application Components
Homepage Framework
Services
Assign Services to Subareas
On the entry :
MSS_HCM_RC_REQREQUEST MSS_HCM_RECRUITING_REQ_STATUS_OV 20
You can set the position as blank, so it will not show up. You can also delete this entry.
Regards,
Bentow. -
Recruiter dropdown in Requisition Request (E-Recruiting)
Hi Experts,
I'm facing trouble when click dropdown list for recruiter in PDF form for create requisition in e-recruiting module. In Development system the recruiter field is filled automatically and the dropdown is working. But how may the error happen in The Tesing client (QA) after all are transported, only the recruiter field is not working properly, it's not filled automatically and the dropdown button is not work. The other input fields are okay.
I try to debug and found that EREQ_RECRUITER_PERNR varible is has some value of recruiters, so the data collection was fine.
Anybody can help or at lease sharing idea and experience.
Thanks alot before.
ADrikavideHi,
I'm facing the same problem and cant populate recruiter downdown field.
Did any one solved this problem?
Thanks a lot.
Best Regards,
Shiva
Maybe you are looking for
-
Triggerring PXI-4110 to measure 1 current value while HSDIO PXI-6552 generating waveform
Hi, Some question about PXI-4110 to measure current while PXI-6552 is generating the waveform. 1. Let say, I need to measure 3 points of current values, i.e. while PXI-6552 is generating sample-1000, 2000 and 3500. On the edge of sample 1000,2000 an
-
How can I get my contacts back when they didn't copy in a back up or a restore?
I did a complete back up of my songs, photo's and contacts and everything else. When I did the update and sync with new music all of contacts were deleted. When I tried to restore from older backups the contacts didn't return. Help please?
-
Wet610n connecting to netgear WDS setup
Hey, Been trying to get a wet610n to connect to the following setup: netgear wndr3700 router: the router has bridging and repeating enabled with the mac addresses of the netgear wn802t repeater and the linksys wet610n bridge in its table. The netgear
-
First, I just want to apologize if this isn't appropriate here. Feel free to lock/delete/move my post elsewhere :) I'm having a BC4J related problem in the OA Framework on JDeveloper 9.0.3.5 and Oracle EBS 11.5.10. I have two EOs that are linked by c
-
Cannot Upgrade Elements 10 Editor (from Mac App Store) to Camera Raw 6.7
Cannot Upgrade Elements 10 Editor (from Mac App Store) to Camera Raw 6.7