E2500 / EA2500 Problems - best way to start over?

Hi,
I installed the E2500 software and I thought everything was working except I couldn't access other devices (i.e., if I was on my laptop, I couldn't view the folders on my desktop). Then I realized that besides my secured connection, I also had an unsecure connection (a generically named one called "linksys"). Also, after installation I went out and got an AE2500 adapter for my desktop since its wireless LAN is 802.11b/g instead of 802.11n (which if I understand correctly has better security).
Anyway, due to the issues I'm having and I think I may have missed something in setting everything up (I found a helpful video just a little while ago), I'd like to start over. What's the best way to do that? Can I just uninstall Cisco Connect on my desktop and laptop? or would it be better to use a restore point to go back?
Thanks for any advice and help.

I already tried this before with E series model. Just reset the router and you can download the latest Cisco connect v1.4 software here. That will just set up everything for you and will update the router if needed.
Cisco Connect Setup Software for PC

Similar Messages

What's the best way to start over?

Hi everyone,
I bought a new internal HDD to replace my main drive that is failing. Other post of mine detail where I have been with issues but anyway...
Here is my current HDD set up:
Bay #1: The failing WD 1 TB Green (10.5.5) which is going back for a refund.
Bay #2: Newly bought/installed WD 1 TB caviar black.
Bay #3: Back up WD 1TB Green (10.4.10) that serves as a back up but I am using it to perform the formating at the moment since the other HDDs are unreliable.
Bay #4: Original WD 250 GB (10.5.5) that came with the MacPro but strated showing signs of failure.
As soon as I started up the Mac I got a message asking what I wanted to do with the newly installed HDD in Bay #2. I obviously pressed Initialize and Disk Utility openned up.
I chose the Option to name and to zero out the drive 1st with a 1 pass zero out. I am wondering though, would it have been better to Verify and Repair the new Disk 1st before zeroing it out with Disk Utility?
Rio

Hi hatter,
Ok. So I slept on it...Sometimes a rest, a fresh point of view or a renewal of patience can help not to give up...
Here is what I did this morning:
1) Tried booting from last night's Cloned main drive again but OS X 10.5.5 still won't boot from the new WD 1 TB Caviar Black (10.5.5) - Endless swirling wheel and aternating blue and light blue screen.
2) I did a cold shut down again.
3) I did a little swich in the drive bays:
Bay# 1: WD 1 TB Black Caviar (10.5.5 - not booting)
Bay# 2: WD 500 GB Caviar SE16 (10.4.10 - partitionned in 1/2 to hold Windows XP on the 2nd partition).
Bay# 3: WD 1 TB Green (10.4.10 - backup boot drive)
Bay# 4: WD 250 GB Caviar (10.5.5 - original drive that came with the MacPro but started the hole failing issues and was the main drive with all apps and files)
4) I booted into Windows XP and used WD Lifeguard Diagnostics Utility and it reported that all drives are OK. But they're not !!! Argh !
5) For the heck of it, I tried booting into the original failing WD 250 GB Caviar (10.5.5) that holds all original apps and folders, and I got in...*** !!!
6) I booted back into the WD 1 TB Green back up drive (10.4.10) and decided to try and SuperDuper the original failing 250 GB drive to clone it onto the WD 1 TB Caviar Black and erasing the previous trial. It took about 1 1/2 hour.
7) I booted into the Black drive again and I finally got in!!! Can I trust this?
Rio

Best way to start a new catalog for 2009 ?

Hi,
What's the best way to start a new catalog for the new year, with all the keywords and all the presets of the modules (without having to export all the folders) of previous catalog 2008 ?
Thanks,
Dominique

Well there is a cost too in not being able to find all your images in a single step, and inconsistencies soon develop - eg a keyword is plural in one catalogue, singular in another. Speed or stability issues are not simply related to catalogue size, and I've seen decently-performing catalogues 50% bigger than yours (as well as slow ones of a few hundred images). Have you optimized the catalogue recently?
But if you think it's a good idea to fragment control of your picture collection.... Presets will be carried over to a new catalogue as they belong to the machine (unless you have the save with catalogue preference turned on). Keywords can be moved via the Metadata > Export and Import Keywords command. If you have lots of collections and smart collections, then maybe make a copy of your existing catalogue and then remove all the items from it - making sure you don't trash them of course.
John

Please suggest me the best way to start learning about Oracle Purchasing.

Hi,
I have started reading about Oracle Procurement. I have an over all idea of how ERP functions. Anyhow I am like a fresher to ORACLE APPS. Can you pleasesuggest me what is the best way to start learning about Oracle Purchasing.
Is it is throuhg user guides or some thing else..... can you please specify the references also.......
Thank you so much.

If you have a sponsorship, I would recommend taking classes with Oracle University. The other resources are documentation, functional and technical depending on what your interests are.
If you can load Vision database or access vision database (I think solutionbeacon offers a free account to login and play around), that will be another resource as well.
As you learn, join as much user groups like this one, and review all questions and answers in the discussions to understand and learn more.
Hope this helps.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

I'm buying a new Macbook Pro this week and am wondering what is the best way to copy over the software I have from my existing Macbook Pro to the new one? eg. Photoshop and Office etc. I no longer have the CDs.

Ya know what I'm on a brand new MBP just about 24 hours old and you know whats been working amazingly for me. I have a 27inch iMac as well and i've just connected it to my network and been dragging files and apps across the network onto my new MBP. Its really working fast and its flawless. You could always do that option, Just go into sharing options and turn them on for both Macs. Then just click and drag. Of course they have to both be on the same network for this to be possible.
Look at my network.
Shared is what your looking at. I click on there see all my computers files and then drag the ones i want form its folder to my MBP folders. Hope that helps if your looking for a very simple way on a wireless network.

Need Best way to start learning Oracle 11g DBA

Hi.This is Tejaswi.
I want to learn Oracle 11g DBA.I've downloaded all software's and Documentation for Orcl 11g R2. Now. i want to start Learning DBA. Can any one suggest me the best way to Start learning DBA?
Please suggest me the good books For Oracle Architecture and SQL.......

Hello Tejaswi,
The advice you got about reading the Oracle Concepts and 2 Day DBA documentation is very good advice.
I found that knowing some SQL*Plus and SQL Developer was also very helpful as, they both provide a way to interface with the database and try the things you read about. For SQL Plus, I used the book:
Oracle SQL*Plus: The Definitive Guide, 2nd Edition
By Jonathan Gennick
Publisher : O'Reilly
ISBN : 0-596-00746-9 I openly recommend it. It is easy to read, the book is very well thought out, it covers what you really need to know (and more too). The author explains the subjects very well. I would definitely learn some SQL Plus and SQL developer before getting into the 2 Day DBA document (make those 2 days about 7 days each if not more).
To learn SQL, I "sort of" used (I say "sort of" because I only read some parts of it available online and at the local bookstore):
Oracle SQL by Example
By Alice Rischert
Publisher: Prentice Hallit probably has more SQL than you'd need as a DBA but, it is an excellent book you may want to consider.
If you are starting from scratch, as I did, you'll find that you need to learn multiple things at the same time. I believe SQL Plus is the best place to start, along with possibly the Concepts document. That will give you a base to build upon.
HTH,
John.

Sysctl.conf - best way to start at boot?

Hi all!
My arch box serves as firewall/router to other boxes on my home network. Obviously, I have to use NAT and net.ipv4 forwarding set to 1 (via sysctl.conf file).
My question is: what's the best way to start sysctl at boot, so those kernel variables are set (forwarding, syncookies etc.)?
Currently, I've:
- put my little script with "sysctl -p" line in rc.d directory;
- call that script from rc.conf;
- sysctl.conf is in /etc .
It works... but, I wander what is the better/proper way of doing it.

Thanks aCoder.
With some other distros, it would be done automatically (sysctl at boot). User just needs to set values of the sysctl.conf file.
With Arch, both steps are manual - and I didn't know any better way. In other hand, that's what Arch is about, eh!
Cheers,
mladen

What is the best way to share over 1000 pictures on Apple TV?

What is the best way to share over 1000 pictures on Apple TV?

Creating Shared Photo Streams:
Shared Photo Streams are permanent iCloud albums for storing photos and videos that can sync across all your iCloud-enabled devices. This is different from your "My Photo stream" that's basically a running tally only holding photos for about a month or 1,000. Shared streams follow different rules...
In your photos app in an iPhone or ipad, at the bottom you'll see a "shared" icon. Choose it and then create a new shared stream, you don't have to actually share it with anyone when it prompts you for a contact just click "Create". Then choose the photos you want in there. If your Apple TV is linked to your iCloud account you will be able to see those shared streams.
See here http://support.apple.com/kb/HT5902.
Apple states:
How many photos and videos can be stored in a shared stream?
A shared stream can hold a maximum of 5000 photos and videos combined. When you reach your limit, you must delete some photos or videos before adding new ones.
How long are iCloud Photo Sharing photos and videos stored in iCloud?
The photos and videos you share (and the comments or Likes associated with those photos) remain in iCloud until you or the contributor delete them manually, or until you delete the shared stream completely.

Migrated new MBPro = slow . Best way to start again without same problem

Hi
I bought a Macbook Pro and on bootup I put my old powerbook with all my data into firewire mode and just migrated things across.
I have been very disappointed with the MBPro speed and have tried to clean it up a bit as I am assuming that Migrating things across has caused this slowness.
I am wanting to do a fresh install but need to get the critical things across
these include my Photo Library in iPhoto and My emails and my iTunes library and my address book. and bookmarks.
I will start from scratch with all the extra applications I have
So when I reinstall what is the best way to achieve this ?
I dont have .Mac accounts but I do have an external firewire hard drive.
To explain where the system is slow it is mainly on boot up and loading for the first time. I checked what was running and everything loaded is a UB so PPC stuff using Rossetta. The spec on the MBPro is standard with the 160gb drive. The powerbook is a 1.5ghz with and upgraded 7200 rpm drive. So I also assume that the PBook drive is a fraction faster but as everything else is way faster in the MBPro I would of though that this would still make the MBPro at least as fast to boot and load things.
It is not alot slower just a fraction but it is noticable. Once loaded the system seems fine and any cpu intensive stuff is way way faster
Thanks

slow startup could be a sign of directory damage, as normal part of the boot process is doing a directory check. booting up on the intel should be much faster, not the other way around. have you tried booting to the install disk and running disk repair?? http://docs.info.apple.com/article.html?artnum=106214 that may be all that is needed to get the boot faster. as well, do you have anything hooked up to the mbpro during startup?? that could also be a factor. as well, if you have not done firmware updates for the mbpro, you should do that as well. this article http://docs.info.apple.com/article.html?artnum=303880 gives up-to-date firmware versions and how to locate them on your mac. from what i gather there are limits in sharing one fw drive between a power pc and intel mac. see this thread. http://discussions.apple.com/thread.jspa?messageID=2950422&#2950422 here is the macosx hints discussion on creating a volume bootable by both types of computers. http://www.macosxhints.com/article.php?story=20060322054212363&query=firewire%2B drive%2Bintel however, you would have to have the space available on the drive, and the inclination to put two different versions (one power pc, one intel!) of the os on one drive, so both volumes are bootable, one with each computer.

What is the best way to start "fresh" with iPhoto '08?

I am running iPhoto '08 on a mid-2007 iMac. When I set up the machine, I moved all the photos from my PC to the Mac retaining the existing directory structure that I had on the PC. I then imported all the pictures into iPhoto with no problems.
Unfortunately, the other person who uses the Mac needs to be able to use the directory structure as it existed on the PC (that structure involves several subfolders with specific names etc.), and it appears that iPhoto is not designed to work that way. I know the photos can still be manipulated in the folders I imported, but then I run the risk of at best, being out of synch with iPhoto and at worst, corrupting iPhoto completely.
That said, what I would like to do is delete or remove the current iPhoto library (or whatever iPhoto accesses; not the whole application unless necessary) and then selectively import photos to iPhoto. That way, the other user can access the photos in the familiar folder structure and manipulate them at will without disturbing the iPhoto db and, once photos are edited etc. and ready for primetime, they can be imported to iPhoto to gain the advantages of displaying using Front Row etc.
My question is what is the best way to achieve what I am looking for? Just backup then delete the iPhoto pkg file in the HD/Library/Receipts folder? Uninstall the entire application and start over?
All assistance greatly appreciated.

ETRA
Welcome to the Apple Discussions.
You don't need to re-install iPhoto, just change the library - and you may not even need to do that.
1. You can easily recreate your Directory structure in iPhoto. Simply start at the bottom of your structure and drag a folder of images to the Source (or left hand) pane of the iPhoto Window. iPhoto will create an Album of the same name. The create your enclosing folders (File -> New Folder) and drag the albums to it. This way you can quickly recreate what you have/
2. The other user of the files can access them directly via the iPhoto Window or a Media Browser such as THIS. The advantage of this system is that your directory structure is available to them ina convenient and recognisable way. They can then drag the pics from the iPhoto Window / Media Browser to the app they as the need. (A whole lot faster than fumbling around in Folder after Folder etc, plus the advantage of keyword searching.)
3. Is this necessary for working with an editor? You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. Btw this is the only way that edits made in iPhoto will be visible in iPhoto.
4. Finally, if you do wish to go as you described: Simply trash the iPhoto Library from the Pictures Folder. Start iPhoto and it will create an new empty library. If you wish to recover the files from the Library first, then Right Click on the iPhoto Library and go 'Show Package Contents'. Your files are in the Originals Folder.
Regards
TD

Best way to start on capture with no timecode?

To my dismay, I quickly discovered that my cam didn't have its timecode set correctly. Therefore, when I captured, I got a HUGE continuous clip.
1. What is the best way to work with this mammoth clip? I'd love to be able to quickly and manually cut each scene change into separate clips, the way auto detect would have done, so it's more manageable. But if not, how should I start to manage the clip? I'm a former PC Pinnacle Studio amateur, so be gentle.
2. I tried adding a fade in on the front of the clip, and I can't lengthen it from 1/10 second, even if I try to drag over the right side. How do I make it X seconds?
Thanks, FCE community!

You can still make suclips if you like. Search for start/stop points manually or just break it up to say 5 minute intervals. eg:
Move the playhead in the Viewer 5 minutes in, hit the M key. Move the playhead another 5 mins, hit the M key and so on. You end up with a bunch of markers manually placed instead of the auto DV detection style, same deal.
Modify>Make Subclips using the method as already discussed then work with the subbies.
Due to FCE being non-destructive you can also put the one large clip in the Viewer.
Set an in/out point, then edit to the Timeline. Only the bit between the in/out point is edited into the Timeline.
Go back to the Viewer, set a new in/out point then edit to the Timeline on so on.
This method allows for handles so transitions will work OK. Using the subclip method you will need to set in/out points to each subclip if you wish to have transitions with them.
Personally, I'd use the later method.
Al

Inherited a Mess - Exchange - What is a good way to start over?

I inherited a mess of an Exchange 2013 Server (yes singular, not plural). Keeping the thing operational has been a nightmare.It is not virtual, it is physical. The hardware it resides on is way over taxed--it serves as a Domain Controller, as well as a dozen other things I'm too ashamed to admit. The mailboxes go to one massive database instead of being broken up into smaller ones. I'm at my whits ends and ready to say: "Screw it" and start over, which with our new network and server expansion I have an opportunity to do so.
Could someone point me in the right direction on what would be the best way to rebuild?
And no, between the amount of system corruption and my user-base, Office 365 is not an option.

Asnew technologies come online and existing ones grow more complex, the world ofinformation technology expands and grows. If you’re a specialist in the ITfield, you already know how critical it is to keep pace with new developmentsand advances. Learning more also makes you more competitive: By growing yourskills and knowledge base, you become more adept at what you do—and morevaluable to a current or future employer.Earninga certification or getting a degree are both excellent ways to expand your abilitiesand boost your earning potential. If you’re looking for quick results,certification may be the best first step. Clickhere to view a rundown of 4 common IT certifications that may help you getahead.

The best way to start with JDeveloper

Can anybody tell me what the best way is to start using JDeveloper? Besides Oracle Manuals, are there other ones? Thanks for responding!!

It would be nice if you can specify what is your background. Which tools/languages you used before?
If you don't know Java pick up a Java book that will teach you the basics and the syntax.
A good free online book is : http://www.mindview.net/Books/TIJ/
Then use JDeveloper to do the code samples in the book.
Use this tutorial to understand the basic of the JDeveloper IDE:
http://www.oracle.com/technology/obe/obe1013jdev/10131/introide/introjdevide.htm
Then once you got the basics you should probably try out the ADF tutorial to see how you build a complete Web application that interacts with a database:
http://www.oracle.com/technology/products/adf/learnadf.html
This page also contains the ADF Developer Guide book.
In addition the JDeveloper home page has links to more demos tutorials and how-to's:
http://otn.oracle.com/jdev

Best way to start?

Hi Folks,
What is the best way to get started with ABAP? Your expert advice would help me a lot. I'm working as Senior Database Consultant since last 12 years mainly in Oracle, now I'm thinking to switch to SAP plateform. Any good material, URLs would be appreciated.
Thank you in advance.
Nauman

ABAP in 21 days
http://cma.zdnet.com/book/abap/ch03/ch03.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm SAP Online Help For Dictionary.
http://sappoint.com/abap/
for SAPscripts
For follg., refer http://www.henrikfrank.dk/abapuk.html
Please note that I do not offer any support for the examples !
ABAP objects and control technology
IDOC
SapScript
Performance tuning
BAPI Programming
Visual Basic Integration - Using the DCOM Connector and BAPI OCX (Only available in Danish)
JAVA and the SAP java connector
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
for keywords
very useful link for all
http://www.sapgenie.com/abap/index.htm
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.thespot4sap.com/
http://www.kabai.com/abaps/q.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
For FAQ
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
Weblog for receive email and processing it through ABAP
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
For Logical database
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
very useful
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Useful link to websites
http://www.hernangn.com.ar/sap.htm
Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
For posting weblog,
/people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
Dynamic Internal table -weblog in sdn
/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Mail
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
Sending mail in background or spool mail
http://www.sap-basis-abap.com/sapac018.htm
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
OLE
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
For language setting and decimal separator
/people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
Oracle queries
http://sqlzoo.net/
To format SQL
http://www.sqlinform.com/
SCOT settings
http://www.sap-img.com/basis/basis-faq.htm
Status Icon [ALV,Table Control,Tab Strip]
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
ALV Group Heading
http://www.sap-img.com/fu037.htm
For multiMedia
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
OOPS ALV
OOPS - Events.
Editable ALV
Tree
TabStrip
Multigrid
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/abap objects/abap code sample to learn basic concept of object-oriented programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample to display data in alv grid using object oriented programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample for tab strip in alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap code samples/alv grid/abap code sample to edit alv grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an easy reference for alv grid control.pdf
Function Module
http://www.geocities.com/victorav15/sapr3/abapfun.html
My Links
Smartforms
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
Table Control
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/table control in abap.pdf

What is the best way to start SAPGUI in a specific transaction

Hello,
What I'm trying to do is to run a Java program that will start SAPGUI (in windows format, not HTML) and present the user with a specific transaction with some data already inserted.
I already managed to start the SAPGUI and I know how to fill in data using the SapJCo but my question is: what is the best way to navigate to a specific transaction? I can activate an RFC of BAPI_CALL_TRANSACTION but it seems like a big overhead. so, can any of you tell me what is the best way activate a specific transaction in SAPGUI using JCo?
Thanks,
Uri Lifshitz.

Uri
JCO are mostly used to executed a RFM on the Destination.
I don't think we could call a Transaction using JCO.
Thanks
Jack
<b>Allot points if my post helps !!!</b>

E2500 / EA2500 Problems - best way to start over?

Similar Messages

Maybe you are looking for