E2E Exception Analysis
Hi All,
I have configured SMD (Solution Manager Diagnostics) on SM 4.0 SP12 and I also have setup IntroScope agent and EP agent succesfully.
When trying to run the program E2E Exception Analysis I get the next message:
"This application is not yet configured. Please refer to the E2E post-installation steps". Unfortunately I cannot find any documentation about these post installation steps.
Can you please help me out?
Regards,
Koen
Hi Koen,
E2E functionalities are very difficult to setup manualy.
In SPS12, you should order a E2E Diagnotics starter pack.
General availability of E2E tools is SPS13 (automatic setup).
Regards,
Xavier Picquart
Similar Messages
-
SMD: no data for E2E Workload Analysis are shown
Hello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
ThomHello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 3) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors and I could see the data in all the steps (E2E Workload, E2E Change Analysis).
Unfortunately since 2 months I can see any data in (E2E Workload, E2E Change Analysis, E2E Exception Analysis).
The E2E_EXTRACTOR_CONTROLLER job runs and is enclosed here
16.04.2008 E2E: Extractor Controller 1
EC: 16.04.2008 14:05:11 UTC Extractor Controller started for SID E11
EC: 16.04.2008 16:05:11 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 14:05:11 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:11 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:12 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:14 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:14 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:14 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:16 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:16 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 14:05:16 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
16.04.2008 E2E: Extractor Controller 2
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:16 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:18 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:18 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:18 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 16.04.2008 01 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:18 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 14:05:20 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:20 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 7
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 14:05:20 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 13 h to 16.04.2008 13 h
RR: Interval (Type e) detected: From 16.04.2008 13 h to 16.04.2008 13 h
ME: 14:05:20 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
16.04.2008 E2E: Extractor Controller 3
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 14:05:21 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 14:05:21 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Can some one help to solve this problem.
Thank you very much
regards
Thom -
SMD on SP15: no data for E2E Workload Analysis are shown
Hello!
I have successfully run Setup Wizard for the satellite solution "EP Portal on 6.40".
Unfortunately no data for E2E Workload Analysis are shown since more than one month.
I use SAP Solution Manager with SP 15, BI CONT 9
I have implemented the following SAP notes:
1088163, 1107804, 110782, 1119766
The jobs E2E_EXTRACTOR_CONTROLLER are running without errors.
Enclosed one of those for portal solution:
09.04.2008 E2E: Extractor Controller 1
EC: 09.04.2008 13:05:52 UTC Extractor Controller started for SID B11
EC: 09.04.2008 15:05:52 CET Installation Number 0020198811
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component
EC: 13:05:52 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:52 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:52 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:54 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/APPLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/APPLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/APPLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/DUMP_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
09.04.2008 E2E: Extractor Controller 2
ME: 13:05:54 UTC Calling Extractor /SDF/DUMP_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/DUMP_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/SYSLOG_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/SYSLOG_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/SYSLOG_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/UPDATE_EXTRACTOR
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor /SDF/UPDATE_EXTRACTOR ,
Extractor Class:
ME: 13:05:54 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:54 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: 13:05:54 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
09.04.2008 E2E: Extractor Controller 3
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:54 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:55 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:55 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eEAExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 09.04.2008 0 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 09.04.2008 00 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eEAExtractor
ME: 13:05:56 UTC Receiving return code 6 from
E2E_JAVA_EXTRACTOR_IF
ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 13:05:56 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200006685
EC: 13:05:56 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:56 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:05:57 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:05:57 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_RFC
EC: Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR
09.04.2008 E2E: Extractor Controller 4
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 08.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type b) detected: From 08.04.2008 12 h to 09.04.2008 11 h
RR: Interval (Type c) detected: From 08.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor /SDF/IDOC_THROUGHPUT_EXTRACTOR ,
Extractor Class:
ME: 13:05:58 UTC Receiving return code 98 from
/SDF/IDOC_THROUGHPUT_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 13:05:58 UTC Main Extractor raises exception. No Data returned by extractor.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:05:58 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:05:58 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:00 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_C_TRANSPORTS
09.04.2008 E2E: Extractor Controller 5
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 1
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:01 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:01 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_CA_CS_EXTRACTOR
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: No action - TSL parameter detected.
EC: This extractor is not allowed to run outside time frame:
EC: From 03 h to 05 h CET
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_JAVA_EXTRACTOR_IF
EC: Extractorclass
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:01 UTC Calling ME.
EC: Read Destination SOLMANDIAG
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:01 UTC Calling Extractor E2E_JAVA_EXTRACTOR_IF ,
09.04.2008 E2E: Extractor Controller 6
Extractor Class:
com.sap.sup.admin.bwextract.E2eWAIntroscopeExtractor
ME: 13:06:02 UTC Receiving return code 0 from
E2E_JAVA_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:02 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F55_XI_IDOC_ADAPTER
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:02 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:02 UTC Calling Extractor F55_XI_IDOC_ADAPTER
ME: No Data Found.
ME: 13:06:02 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F60_XI_E2E_PROXY_STATS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F60_XI_E2E_PROXY_STATS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Invalidating MDX Cache.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_C_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_C_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
09.04.2008 E2E: Extractor Controller 7
EC: Extractor F90_CA_NOTES
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_NOTES
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_ST_API
EC: Extractor F90_CA_W_TRANSPORTS
EC: Extractorclass
EC: Product 01200314690900000192
EC: Main Instance (1) 9
EC: Main Instance (2) 01200314690800000134
EC: Component 01200615320200005507
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_ST_API Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 02.04.2008 12 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor F90_CA_W_TRANSPORTS
ME: No Data Found.
ME: 13:06:03 UTC E2E_ME_ST_API Main Extractor Run finished.
EC: Main Extractor E2E_ME_RFC
EC: Extractor E2E_SSR_EXTRACTOR_IF
EC: Extractorclass
EC: Product
EC: Main Instance (1)
EC: Main Instance (2)
EC: Component 01200615320200005507
EC: Local Execution of Extractor.
EC: ME called in Multi-Mode.
EC: 13:06:03 UTC Calling ME.
EC: Read Destination
ME: E2E_ME_RFC Main Extractor Run started.
RR: Calculating Required Records.
RR: Scanned Interval: From 09.04.2008 00 h to 09.04.2008 12 h
RR: Interval (Type e) detected: From 09.04.2008 12 h to 09.04.2008 12 h
ME: 13:06:03 UTC Calling Extractor E2E_SSR_EXTRACTOR_IF ,
Extractor Class:
E2E_SSR_EXTRACTOR_0CCMSATPH
ME: 13:06:06 UTC Receiving return code 0 from
E2E_SSR_EXTRACTOR_IF
ME: No Data returned by Extractor with no Error detected.
ME: 13:06:06 UTC E2E_ME_RFC Main Extractor Run finished.
ME: Number of records written to persistence: 0
EC: Invalidating MDX Cache.
Any helpful information will be appreciated
regards
ThomSame problem being observed in our Solman system (SP15). Below are the errors observed in the spool output of E2E framework jobs,
1] ME: Data Loader Error occurred.
EC: 21:05:44 UTC Main Extractor raises exception. No Data returned by extractor.
2] No action - TSL parameter detected.
This extractor is not allowed to run outside time frame
3] ME: 21:05:45 UTC Receiving return code 98 from
/SDF/UPDATE_EXTRACTOR
ME: Error:
ME: Error - No RFC Destination maintained for remote execution.
EC: 21:05:45 UTC Main Extractor raises exception. No Data returned by extractor.
4] ME: Error:
DATA_RETRIEVAL_EXCEPTION
EC: 21:05:46 UTC Main Extractor raises exception. No Data returned by extractor.
Tried referring E2E workload analysis guide...no use..the issues have not been covered in that. -
I created exceptional analysis like when a material gets rejected more than twice, should trigger a mail to QA manager about the rejection.
Also I scheduled that exception in such a way that job should run for every 5 minutes.
My concern is when a material gets rejected for more then twice, mail is triggering for every 5 minutes and filling up inbox.
My requirement is like only once a mail should trigger automaticcally, when the material gets rejected more than twice.
Please advice me some solution....The exception analysis was generally designed to look at things over a larger period of time then what you are looking at.
It is looking more at trends. I.e. the standard structure S069 (material) has "month" as a key characteristic and you would set up the exception to email when you had say.. 5 rejeted lots for a given material in the month. And you would run this nightly or on the first of each month.
You are looking for almost real time feedback; which the exception analysis wasn't truly designed to do.
I would suggest you look at the follow-up actions that you can add to a UD code. There is already an example follow-up action that SAP provides that sends an email to the user. This is set up on any 'Reject' UD codes so that users can get an email whenever a usage decision is rejected.
I suggest you use this and modify the folow-up action to send the email only when the previous UD for the material was also a reject. That way you can put this follow-up action only on the reject UD codes. This should be pretty simple for an ABAP'er to modify and do.
FF -
I am unable to see E2E change analysis tab in SMD. I can see E2E exeption,trace and workload analysis but not Change analysis....Can anyone of you please let me know if i need to do any configuration for this....
REWARD POINTS FOR ALL USEFUL ANSWERS...
Thanks,
Ajay KandeThnx a lot Frederic.
Can you tell me regarding the following error:
type com.sap.sup.admin.e2e.trace.wd.model.types.Syuzeit could not be loaded: com.sap.dictionary.runtime.DdException: TypeBroker failed to access SLD: Error while obtaining JCO connection.
I am getting this error when i try to execute E2E Trace Analysis.... -
SMD on SP15: no data for E2E Workload Analysis is visible
Hello,
I use SAP Solution Manager 4.0 with (ABAP SP15, BI CONT 703 Patch 9, LM-Service 14 Patch 4) and would set up the SMD functionality for SAP EP 6.40 SP19.
The Set up Wizards runs without any errors but I could see the data in the tabs (E2E Workload, E2E Change Analysis)
The E2E_EXTRACTOR_CONTROLLER job runs without errors.
Which actions should be done to solve the problem?
Thank you!
regards
ThomTom,
Make sure that when you ran SMD setup wizard, job CCMSBISETUP completed successfully. Check this in SM37.
Check ABAP runtime errors in ST22.
If you are getting RAISE_EXCEPTION error, apply note 1119766.
Make sure that MultiProvider 0SMD_MPIH is activated. In BI client run transaction RSA1, Modeling, InfoProvider- check if 0SMD_MPIH is active.
If above doesnt solve the issue, try to do Manual activation of BI Content for E2E Diagnostics. (note 1110013)
Hope this helps.
Thanks,
Labinot -
Hi All,
Currently we are searching for BI - IP workload analysis tools. I come to know that SolMan Diagnostic tool E2E Workload Analysis for BI useful somewhat to measure the work load. Kindly anybody can tell me
1. Is this tool works for JAVA environment or not
2. How it is useful for BI-IP workload analysis
3. Is there any tools like SolMan diagnostic tool.
4. If we install this tool in SolMan what is the impact.
Thxs,
KVAThis is what I get from Application log (slg1) when I try to drill down on system BIJ (java system) and the page under Workload Analysis do not display (WA-Overview) is ok:
SELECT { [Measures].[0SMD_AVG], [Measures].[0SMD_MAX], [Measures].[0SMD_EXS
] } ON 0, NON EMPTY [0SMD_METY].MEMBERS ON 1 FROM [0SMD_MPEH/0SMD_MPEH_WA_Q
0008_H] SAP VARIABLES [0SMD_V_SID] INCLUDING "BIJ_2" [0SMD_V_TIHMFROM] INCL
UDING >= "201008270000" [0SMD_V_TIHMTO] INCLUDING <= "201008272359" [0SMD_V
INFOPR] INCLUDING "0SMDPERH" [0SMD_V_INFOPR] INCLUDING "0SMD_PE2H" [0SMD_
V_MTYPEM] INCLUDING "IVIEWS" [0SMD_V_MTYPEM] INCLUDING "BI RUNTIME SERVICE"
Value "BIJ_2" for variable "E2E SID Variable" is invalid
Type:E, Id:BRAIN, Number:643, System:SMDCLNT001
I applied the note Note 1301656 even if we are already sp23. I also regenerated the query 0SMD* in bi client.
What does Value "BIJ_2" for variable "E2E SID Variable" is invalid mean and how to correct this? -
E2E Workload analysis-Conditions tab
Hello,
While cheking the E2E workload analysis, I could see three expandable (drill down) tabs in the workload analysis section. 1. Conditions 2. Navigation 3.Metric Data Display. Here I am not abe to understand the functionality of 'Conditions'. Could you please tell me the use of this and how we can use this?
Regards,
Rajeevduplicate post
-
Hi All,
Is E2E Change Analysis functionality of SolMan 7.1 able to track changes made in configuration object of Solar02-config tab? How do I know who has changed what configuration object and what changes has been done?
Any response is helpful!
Thanks,
ShaunHi Shaun,
Do you know transaction solar_eval? It is used to report many data from the project/solutions/test workbench area. It currently has no option to report the history of changes of the objects, but when the SP05 for solman 7.1 comes out, it'll enhance this functionality adding the option to report the history of changes of the tabs or the history of changes of the documents.
kind regards, Fabricius -
Hi All,
I'm trying configure E2E monitoring. I configured all necessary steps, I can see my BI 4.1 system in SLD, also in SOLMAN, all “lights” are green. But if I start Root Cause Analysis>> Ent-to End Analysis>> My system>> Workload Analysis, I see this error "The systems you selected do not contain any software components currently supported by E2E Workload Analysis".It would be better if you can raise the question at Remote Supportability and Monitoring Tools
and or comment in the blog post How to generate and consume an E2E trace with BI4.x (for non-SolMan landscapes)
created by Toby Johnston
Do go through the note 1871260 - The systems you selected do not contain any software
components currently supported by E2E Workload analysis for SAP HANA
Hope they help. -
Dear all,
I have some question about the E2E trace analysis on solman. Hope you can help me!~
1. We are using Solman 7.1 SP6 and we will upgrade to SP10 or SP11 in recent months. We want to use solman RCA trace analysis to trace ERP ABAP program. Could anyone can told me how to do this? I can do the HTTP trace in solman with RCA trace analysis but I don't know whether we can also nalysis the ABAP trace in solman.
2. We have many printers in our PRD systems and all printers connected to a SPRINTER server. Now we need some suggestion on how we can monitoring these printers with solman. Also we hope to use the RCA tools to nalaysis the problem on printer such as the printer are offline/dead halt/printing very slowly and so on.
Is this possible?Hi Yushuai,
1. Using E2E in SolMan you can capture the movement of request and response to any JAVA and ABAP system. It will show you that what ABAP program has been called but It will not tell you what happening inside ABAP program.
Regards,
Ravi Maheshwari -
SMD E2E: Configuration Analysis
Hi!
I can already see the data for E2E Workload Analysis.
Unfortunately I cannot see the data under the tab "E2E Configuration".
Can some one tel me how to proceed with with errors/warnings?
No SID found for value 'E11 0020198811012003146909000001927' of characteristic 0SMD_FSRC
Invalid filter on 0SMD_FSRC: Filter changed
Characteristic 0SMD_CSAL was changed in InfoCube 0SMD_CA01. Adjust the query
What I have already done
tcode RSRT --> Gen. query directly --> "0SMD*"
tcode CCMSBISETUP --> Sceanrio "E2E"
Any helpful information will be appreciated
regards
ThomHi,
I'm trying to setup E2E. Diagnostics server (BI client in solman) & Managed system setup was done.
I don't see any graphs(at least plain) in solman. I observed that extractor jobs are failing, also i dont see any info objects under solman diagnostics in TC - RSA1.
Please guide.
Thanks in advance. -
Error while accessing E2E Change Analysis via SMD
Hi All,
I am having below mentioned error while accessing E2E Change Analysis via SMD.
Error loading template 0TPL_0SMD_CA01_Q0001
Notification Number BRAIN 276
Let me know if you are aware about the solution.
Regards,
Vinit PagariaIs the Queries and templates activated completely in BI-content/Client?
Please check the same and if needed activate the queries again by running report :CCMSBI_SETUP_E2E
Also refer to the SAP Note 1342231 - ST: Manual actvtn. of BI Content for E2E diagnostics SP18-22.
Revert for any issues pls.
Thanks,
Jagan -
E2E System Analysis Expert Analysis - cant find server
We upgraded our Solution Manager to v7.01 EHP1 sp06 and configured/updated RCA in our managed systems with wily and diagnostic agents. Diagnostic Agent is v7.11
When we tested System Analysis Tab, select a java system , clicked Expert Analysis and selected "J2ee System Info" or any other link (except Thread dump analysis link) the system displays an error that it can not find the server and shows the URL http://hostname:port/sap/public/myssocntl?sap-client=001
For another Java system, there is no error displaying the page. Can you please help?Hello Lurdes,
Could you share , how to deploy the RCA in the managed systems , ABAP , JAVA and Dual stacks
or if u have document or step by step screens on the above
It could be of great help to me
Thanks in advance
Regards
Sidharth -
SMD E2E Trace analysis - Urgent!!
Hi,
I have configured Root cause analysis for r/3 system. Everything is working but unable to enable the system in Trace analysis. Its says, Trace status could not be evalutated.
The system meets all the prerequisites in note 1061383 and Exeption,Configuration analysis are working fine for it.
Please help
Ajay KandeMake sure your RFC destinations in java in monitored system to the SLD are working correctly, ie VA > Server > Services > SLD Data Supplier.
Do a "trigger" to make sure you can pass info to the SLD.
Maybe you are looking for
-
When I recently updated Firefox, my tabs stopped working. When I right-click on a link and select "open new tab," the tab opens with the link in the address bar, but the page is blank. Only when I switch to the new tab, put my cursor on the address b
-
I have been trying to set up icloud on my ipad but after I run the program, nothing shows up on my computer screen or ipad. Have I left something out?
-
How do you uncheck songs and TV shows in iTunes?
I have iTunes 12.1.0.50. Everytime I try to uncheck a box an exclamation point in a circle pops up. Its extremely frustrating and I can't figure it out.
-
URGENT timout problems with bc4j
Hello Jdev Team, We have a serious problem with the BC4J. The situation is as follows: We use BC4J with jsp pages an run the whole thing on a j2ee Container. We have written our own ApplicationPool class and ApplicationModule datatag because the user
-
Simple Question: Carriage Return in description field
Hi, i need to know how to insert a carriage return in my description field. Its a string field and I use the following code: rpt.DataDefinition.FormulaFields["BSpalte"j].Text ="\""bperiod((char)13)"Durchschnitt"bsperiod"\"" ; It compiles and the code