E3200 Opening NAT settings for Xbox 360/Live help

Hello everyone, I have just purchased a E3200 today and my nat type is strict on Xbox live, that's what it says when I'm in the lobby in Modern Warfare 3. How do I get a Open NAT type? Any help please? THANKS!

This is a volunteer forum, not a 24/7 hotline. Who's your ISP and what is the model number of your internet modem?
I don't work for Cisco. I'm just here to help.

Similar Messages

Opening NAT settings for Xbox

So recently I tried opening NAT settings so I could use my Xbox Live more efficiently. Unfortunately, I know nothing about computer networking. Is there anything I can do to get this up and working?

Unfortunately, the AirPorts are not listed as Xbox Live-compatible routers ... so there is no guarantee doing this will get Open NAT status for Xbox Live!
The following web blog does a great job explaining the NAT issues with Xbox Live! Basically what it comes down to is that although you can get an Internet connection for the Xbox with the AirPorts, you may not get the necessary NAT setting (Moderate or Open) for the Xbox Live! on-line game that you want to play. As such, you basically have two options: 1) Create a DMZ (Apple calls this a Default Host) for the XBox or 2) Configure the AirPort for Port mapping to open the required ports to allow Xbox Live! access ... or 3) Use a compatible router.
Option 1 - Create a DMZ
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT
Enable default host at: <Enter the IP Address for the XBox>
Option 2 - Configure Port Mapping
The following ports must be available for Xbox Live to operate correctly:
UDP 88
UDP 3074
TCP 3074
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the Xbox 360.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
Click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <Enter the MAC hardware address of the Xbox or the MAC address of the wireless depending on how you connect the XBox to the network.>
IPv4 Address: <enter the desired Private IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > NAT > Configure Port Mappings
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): 88, 3074
Public TCP Port(s): 3074
Private IP Address: <enter the DHCP Reserved IP address for the Xbox you created earlier>
Private UDP Port(s): 88, 3074
Private TCP Port(s): 3074
Click "Continue"

Amazon Q&A - E3200 - Default Nat Type for xbox 360 and ps3

Date: Sep 5, 2012 4:08:21 PM PDT
Linksys E3200 High-Performance Simultaneous Dual-Band Wireless-N Router
the nat type for xbox 360 and ps3, what is it when you set the router up out of the box? are the nat types open moderate or strict

Hi there. It actually depends if the gaming consoles ports are not blocked by your ISP. Moderate NAT type limits your connection playing online games, Strict does not allow you any connection at all while Open allows you to play with everyone online. Have you had a router before with Open NAT on the gaming consoles? Try to check without the router by going directly to the modem and see if your NAT type is open or strict or moderate. If ever modem is fine and it is the router not working right you can port forward ports on the router. I found these usual ports online, for XBOX live:TCP and UDP ports: 80-88, 3074-3074, 4267-4269. For PS380, 443, 3478, 3479, 3480, 5223, 8080 and UDP: 3478, 3479.
Setting up port range forwarding on Linksys wireless-N routers and gateways
Resolving NAT type issues with gaming consoles through a Linksys router
PS3
Setting up an Xbox 360® behind a Linksys Wireless-N router

WRT54GS V7 NAT TO OPEN, HOW? For xbox 360 live

I recently got a new modem DSL modem so I had to re start my wireless Linksys router settings to factory default. I use AT&T DSL.
I got my network all set up again and can connect to Xbox Live fine. My desktop has the DSL modem and router plugged into it. Thats in another room. Im in my room on my laptop, with my Xbox 360 next to me. I used to plug the ethernet cable from the 360 to my laptop, and I could get online fine.
But once I connected today, it said my NAT was set to Strict.
How can I set my NAT to open, or even Moderate. Because as of right now, I cant really join ANY games online at all. (I tried with Call of Duty Modern Warfare 2)
Thanks

As you have DSL modem,you need to convert the modem into the bridge mode to make your X-Box working.

Open nat type for xbox 360 with wrt160n?

How can I open my nat type on the xbox 360 with my wrt160n?
Currently it is on moderate..........

I had this same problem, I had to enable three things. enable UPnP, enable Allow users to make congiguration changes, enable Allow users to disable internet access. You most likely have the first two I mentioned enabled but the last one is the one I didn't have enabled and once I enabled then I had open NAT

Trying to change NAT connection from moderate NAT connection to an open NAT connection for XBOX LIVE

Hi, I have a Linksys Wireless-N Broadband Router/WRT160Nv2 and I have been trying to change my NAT connection from a moderate NAT connection to a open NAT connection for my Xbox Live on my Xbox 360. I can sign into my Xbox Live account but it is working on a moderate NAT connection. I have already enabled the UPnP and put in the proper port numbers. After doing that I signed into my Xbox Live on my Xbox 360 and tested my Xbox Live connection and still it says that I a moderate NAT connection. I do not know what elso to do and I would greatly appreciate step by step help from anybody who knows what they are doing. PLEASE HELP ME AS SOON AS POSSIBLE!!!!
Thank you

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

WRT54GL setup problem for xbox 360 live

I am new to wireless networks, and trying to setup a wireless network for my step-sons XBOX 360 live. I purchased a WRT54GL wireless router, and a Xbox wireless adapter MN-740.
I wired in the WRT54GL into my Windstream DSL network at home, and used the automated phone system to get the internet backup, and running. But, when trying to install the software on the enclosed CD, after typing in the IP address, and gateway address, I get "router configuration error".
Any ideas, or links to help threads would be great.
Thanks, Jon

For router set-up follow this
For XBox follow this :
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

WRT160N V1 Open Nat on 3 Xbox 360(s) Possible for Call of Duty Modern Warfare 2?

All connected wireless.
Possible? If so please assist or direct me to a router that would work.
I'm using the Motorolla SB5101 connected to Cable at about 25 Mbps.

So you need to Open NAT on all your 3 XBOX's. Well i don't think its possible, never tried to make the NAT open on 3 XBOX. Yes but 2 XBOX can work with your Router and the NAT will be open on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Click on "Administration" tab and disable the option UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox , IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox, Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
On you need to Assign a Static IP on your 2nd XBOX. the IP address should be 192.168.1.30, Subnet , Default Gateway, and the DNS should be the same as of your 1st XBOX.
On your Router page, under the Application and Gaming tab you need to click on the Sub tab "DMZ" and you need to Enable DMZ and input the IP address of your 2nd XBOX and click on Save Settings...
For your 3rd XBOX you can try to Enable Port Triggering and open the same ports : 53 to 3074 and click on Save Settings...
Now you need to restart your all the 3 XBOX's and check if the NAT is Open.

WRT54GS NAT Settings Concerning Xbox 360 Setup

My xbox 360 is connected to a Dell Inspiron B130 notebook via an Ethernet cable. The notebook is then connected wirelessly to a Linksys WRT54GS router. The router, finally, is connected to a Sprint DSL modem. My problem is that with this setup, whenever I try to play online on my 360, it tells me that my "NAT settings" are set to "Strict", and that they should be set to "Open". Could someone please tell me how to fix this problem, providing step-by-step instructions? Thanks!

Do have the proper ports forwarded in your router?? Be my only guess......or check ebay for an xbox360 wireless adaptor.

WRT54GL Open Nat with 2 Xbox 360s

Hi All,
I've been searching all over for this answer and at last have decided to post here on the forums. I am running a Linksys WRT54GL v1.1 router with the latest firmware from the website: v4.30.14. With this setup, I am having a helluva time trying to get 2 Xboxs wired into the router to show OPEN NAT on Xbox Live. I can get one of them working, but when I bootup a second Xbox it either comes up as Moderate NAT or Strict NAT. Often times when playing on Xbox Live with that second router, it will get disconnected most likely due to a Strict NAT. My router configuration is running Automatic DHCP with a Mac Address filter for security.
Does anyone have any suggestions for getting this to work? c4

Yes, you can try to trigger the ports instead of forwarding the ports.
Who is your Internet service provider?
Open the setup page of the router and go to status tab. Check the Internet IP address on the status page.
All the settings seems to be correct.
did you try to upgrade the firmware on your router?
If not then try to upgrade/re-flash the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.

Linksys e2000 router Open NAT troubleshooting multiple xbox 360's

Hello,
I've been searching for about 4 hours now how to fix my NAT problems. I thought it had it working on one xbox in my bedroom, as it said OPEN NAT. But, when I looked at my Xbox in the living room, it said MODERATE NAT. How can I get these both to say OPEN NAT? Any help is appreciated. Thank you!

If you're attempting to game with multiple 360s, port triggering would be your best option.
You might succeed in getting open NAT on both but the issue would be if you'd be able to play the same game on both consoles simultaenously. Since both consoles will use the same Internet port, the game packets will only be sent to one local IP address. Some games support this and some don't so if you're unable to get open NAT on both game consoles, call your ISP and request for another IP address. That should solve everything.

Open NAT to New Xbox 360

I just replaced a brand new Xbox 360 arcade with an Xbox 360 Elite.
When the Arcade Console was hooked up it showed the NAT on my WRT54GS version 1.51.0 router as "OPEN".
After I replaced it with the Elite console it shows the NAT on my WRT54GS version 1.51.0 router as "Moderate".
To host games it needs to be open.
So can anyone help me get it to "OPEN"?

Do you have the ports forwarded for your XBOX on router?

Correct settings for xbox 360

Hi i have an older airport extreme with wireless N and dual band signal. I'm trying to connect my xbox 360 to it wirelessly for xbox live. I know i'm not the first one to ask this question but truth be told, I had it working fine until apple's latest update in late January 2012. Since then the xbox will connect and have a good signal (at least 3 bars and usually 4) on xbox's test screen. I've looked for an answer to my problem but it seems no one has posted anything about this yet because the software for the airport and airport utility are so new. What will happen when playing a game is it will connect and start out fine with a good transfer rate (not great but good because my laptop somehow has a higher transfer rate. laptop 144mbps. xbox 360 65mbps) But after playing an online game the transfer rate dramatically drops, and drops so much that it becomes extremely laggy and then kicks me out of the game saying something like lost connection to server, making any online game unplayable. If i restart the xbox and play the same game online, the same thing happens. Like i said none of these problems were happening before this recent software update. As a side note, the software update also seemed to remove some useful options from the router like the ability to increase the power of the signal (i really dont unstand why apple would remove features but whatever). So if anyone has a fix or suggestion, please reply to this.

i basically answered my own question. i reverted back to 7.6 firmware and got rid of 7.6.1. And now everythings fine. Thank you apple for supplying me with an update that made it worse.

Open NAT for xbox 360 live???

I am using a westell 6100G with a linksys wrt54g wireless router. xbox live is saying my NAT is set to moderate. How can i set it to open?

#1 Check the IP Address, Subnet Mask, Default Gateway and DNS Servers on your computer.
a) For example if on Windows XP, go to Start -> Run.
b) Type in cmd and press enter.
c) In the new window, called the command prompt, type in ipconfig /all and press enter.
#2 With your web browser go to the Default Gateway found, and log-in as need be.
#3 If you get access to the Linksys, go to Administration -> Management
#4 If you do not have at least two game consoles behind your router, turn off UPnP in the router.
By game console, a special type of computer with no keyboard or mouse (and it/they are usually connected to a TV).
#5 In the Linksys go to Status -> Local Network.
#6 Setup a Static IP on the Xbox, outside of the DHCP Server range. http://portforward.com/networking/staticip-xbox360.htm
For example..
If the Starting IP Address is 192.168.1.100 and the Ending IP Address is 192.168.1.149, you could set the Xbox to use 192.168.1.6
#7 In the Linksys forward to the IP Address that you setup on the Xbox.
#8 In the Linksys go to Status -> Router.
#9 At portforward.com there is text that says Your external IP is
#10 In the router at that screen, you should see the same IP Address.
#11 If you do not, then follow this FAQ to get the modem into bridge mode.
http://www.dslreports.com/faq/13600
^^
If you have any questions, please ask.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Open NAT problems with Xbox One .

When I first got my 1900ac I used Media Priortization to get an open NAT for Call of Duty Advanced Warfare on my Xbox One ; prioritizing the Xbox . It worked fine for about 6 months until I changed cable/net provider to Nextech in Ks. This company uses the 1900ac to hook up it's system for all it's customers ( since I already had one they're using mine ). Unfortunately I'm unable to get an open NAT in this game anymore ; I've tried just about everything , NAT forwarding , triggering , Media Prioritization . Nextech support & Xbox Live support , useless . Tried Portforward . com , nothing . Forwarding port 53 cuts off net connection & doing the static ip change for Xbox didn't help . Almost everything I've looked at seems out of date & I'm at my wits end . It would seem by now Linksys should have solutions available , any ideas ?

Thank you chin_pamz13 for your response . I tried to check if my modem had a public or private ip address but I'm not sure how to do that ; I've read about double NAT's elsewhere . Regardless , I think I've finally found a solution that seems to be working so far . I went to the website " tech - recipes . com " & found an article , " Xbox One open NAT " by Aaron St. Clair . I tried his first suggestion about port triggering , with extra ports I had'nt seen before . That did not work for me so I followed his instructions for putting the Xbox in the DMZ & it's working ! I think my problems from before were the result of improperly setting up the static ip address for my router & Xbox . Previous instructions had me changing the ip in the console along with the router ; Aaron said not to do so in the Xbox , let the router do the work it's supposed to do & make sure the settings in the console are on automatic . In the router at the DMZ , I was'nt sure how to proceed , but at the bottom is a section labeled DHCP reservations list ; clicked on that , saw XboxOne , clicked on that & it filled out the MAC address above for me . Then I went to the Xbox network settings , advanced settings & clicked " automatic " at ip address , subnet & DNS . I checked mutiplayer connections & did the " hold bumper & trigger buttons " trick & finally got an open NAT ; fired up CoD Advanced Warfare & got the open NAT there also . I may have screwed up when I did the port triggering but since the DMZ fix seems to work I'm going to leave things alone . Hope this helps others with open NAT problems .

E3200 Opening NAT settings for Xbox 360/Live help

Similar Messages

Maybe you are looking for