E52 fw 031.012 3g data "connecting" icon always on...

Since the last update of my E52's firmware, the 3G connecting (not "connected") icon - which is the one with the dotted 2-way arrow under the signal meter - is always shown on the screen. I have no applications running in the background (as the task manager says). I have disabled all the internet synchronisations and the icon is still there, from the moment I power-up my phone.
This doesn't cause me any problem (apparently), but I was wondering if that is normal. Other than this, all applications that use this kind of connection work fine. They connect through 3g (the icon goes to full 2-way arrow), they do their job and then they disconnect and the connection icon goes back to the "connecting" state.
I have also tried to force the phone to close all active data connections, by keeping the hang-up button pressed for a few seconds, but nothing happens.
Any idea?
Solved!
Go to Solution.

Hi, try this
control panel>>settings>>connection>>packet data >>
change the packetdata connection to when need, it could be on the when available setting.
If you like my post kindly hit the Green Star Button on the left.
Nokia Phones owned: 3310, 8310, 7650, 3650,7210,6230, 6630, 6600,6100,6610, 6610i, 3230, 8800, 5700XM, E52 (only Nokia phones)

Similar Messages

N8: Data connection is always on

since the last FW update the data connection is always on is connects automatically after manually disconnection it. It is creating around 200 to 300MB of traffic per day.
Checking in the connection manager it is the App Messaging.
Checking with the App "DataWatch" the application neasserver creates the traffic.
It could be somehow linked with the Exchange Mail client?
Can anybody send me a hint how to switch back to a normal check every 15min as it is configured.
Thx

Hello chrisscn43, try this go to settings>connectivity>settings>data use in home country(set this to always ask). Again in the same thing go to destinations and then options>default connection(just create a new access point and set this as default in this way the connection won't take place.). Again check this too in the home screen tap options>widgets to online/offline mode. Check whether its shown as widgets to offline mode. If so then it means that your home screen widgets are in online mode and data transfer is taking place. Touch that so that the option changes to widgets to online mode. Try and reply.
Nokia C7

Network connectivity icon always spining

Always i connect to wifi or internet via sim card the connectivity icon appears and start to spinning , its seems an application start to send or receive

Apps are pulling data in the background, causing that spinner to spin.
If you want to disable it go to Settings > General > Scroll down to Background App Refresh and tap it. Then select the apps you want to prevent from downloading data in the background

N97 mini data connection is always on?

Why is the data connection always on,on my n97 mini phone this kills my battery life? I've been playing with it for 2 days now trying to figure out what's making it stay on all the time but I can't find the source can you please help? THANKS

hi this will help
Internet communication settingsSelect Menu > Settings and Connectivity > Admin.settings > Net settingspacket data select when needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

E52: to update to firmware 031.012 or not?

What is the general opinion regarding the new E52 firmware (031.012)? I've read more of the problems than good things. So, to upgrade or not?

In addition you loose the possibility to play AAC+ (aka AAC-HE) music files. Normal AAC files (aka AAC-LC), eAAC+ (aka AAC-HE v2) and MP3 files still play fine.
As I have ripped my music collection to AAC+ I have to rip them again to another format.
BTW same happened on the E72 with the upgrade to 22.007 (and probably also in the latest 23.002).
FreeBird

Excel 2013 crashes when creating VFP OLE DB Data connection

Hi all,
I don't know how often the DBF format is used in Office but it seems some demand still exists because Microsoft created 64 bit version of dBase ODBC and OLE DB driver (in Access data engine). Then I don't understand why Microsoft ignores its own FoxPro
DBF data format because FoxPro ODBC driver is not supported already and no 64 bit version of VFP OLE DB driver is planned...
I am testing DBF file import to Excel 2013 (32 bit) but it crashes instantly. I have VFP OLE DB driver (the last version), some small DBF file, and I am trying to read it as external data in Excel.
Steps to reproduce (menu prompts are translated, so some differences may occur):
Open empty worksheet
Click "Other data sources" on Data ribbon
Select Data Connection Wizard and from the list of available drivers select "Other" and click "Next"
A list of OLE DB providers installed appears, select Microsoft OLE DB Provider for Visual FoxPro and click "Next >>"
Excel 2013 crashes...
This process works in Excel 2010 and 2007 so the problem must be in Excel 2013...
The question is how to read DBF data in FoxPro format when there is no older Office version available?

To connect to a Visual FoxPro database or table in Excel
Open an Excel worksheet.
From the Data menu, point to Import External Data, and click
Import Data.
In the Select Data Source dialog box, click New Source Data Connection.
In the Data Connection Wizard, select Other/Advanced.
In the Provider tab, select Microsoft OLE DB Provider for Visual FoxPro.
The Connection tab in the Data Link Properties dialog box appears.
To connect to a Visual FoxPro database or table in Word
Open a Word document.
From the View menu, point to Toolbars, and click
Database.
On the Database toolbar, click the Insert Database icon.
In the Database dialog box, click Get Data.
In the Select Data Source dialog box, click New Source Data Connection.
In the Data Connection Wizard, select Other/Advanced.
In the Provider tab, select Microsoft OLE DB Provider for Visual FoxPro.
The Connection tab in the Data Link Properties dialog box appears.
To add a Visual FoxPro database or table folder
On the Connection tab and in the Select or enter a database name box, type path and name of the database or table folder you want.
-or-
To browse for a Visual FoxPro database or table folder, click the ellipsis (...) button to the right of the
Select or enter a database name box to open the Configure Connection dialog box.
Specify a different collating sequence if desired.
To test the connection, click Test Connection. If connection is successful, click
OK.

5800 Email setup wizard use data connection withou...

While setting up my email account on 5800xm through Messaging>Options>Settings>Email, the email setup wizard automatically opens. After defining the email address and password, the wizard automatically attempt to connect through 3g data connection to retrieve the email settings. Why is there no options to choose which connection to retrieve the email account settings?
Does anyone expereince the same problem? How can i change this?
was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
KeN82Ny

It seems to have worked on my 5800 Xpress. To decode the advice, two icons regarding the email setup were on my screen, one for email and one for email set up. The email set up was in pink. I pressed the white button to get the Organise, went in , selected the pink email set up icon and Removed it. Now both icons are gone. We will see tomorrow morning if I get the annoying message again asking me to go on the network. Think it is sorted. I suspect that accidentaly starting the proceedure keeps it hanging around in the background.

"Get media content now" without data connection?

Hi all.
I have a prepaid sim in my Lumia because I use it very little. When I got my Lumia charged and running 2 weeks ago, I had the equivalent of over $240 credit on my SIM card, "Data connection" was switched on and once the Lumia was running, I sent one single text message with the word "testing" to my daughter. Next day I was horrified when my provider sent me a message "you have less than 10 Francs credit". I called Swisscom and they told me that the day before, my Lumia had gobbled up more than the equivalent of $150 and that THAT day so far it had used up over $80. I felt absolutely sick. Normally 100 Swiss Francs lasts me for a year.
They told me to switch off the Data connection and just use wifi. But now, when my daughter sends me a picture, I just get that blasted "Get media content now" message.
I simply cannot afford the data connection. I could get images and multimedia content messages fine with my late departed and much-missed E7 and even my old Communicator could pick up multi-media via wifi. so why the step back with the Lumia ??? And is there any way I can get e.g. multimedia images without a data connection (I already tried the aircraft mode on/off trick with no luck).
Our entire family have been Nokia customers since they first made mobile phones but by now I am the only one of us who has persevered (thanks to the Communicator then the E7) but I hate this bloody Lumia 900 thing which I received as a replacement for my non-charging E7. I swear I am going to put it on ebay and get myself an Iphone and will never buy a Nokia again.

The 150+ SFr was presumably from a phone software update. I didn't send an MMS message but an SMS = one word only.
I checked that the wifi icon was on at all times but the Nokia seems to look first for G3. Because Nokia didn't even have the courtesy of sending me a manual or user instructions of any kind (or charger or SIM removal pin or headphones) when they sent me this phone, I didn't think of checking the data connection setting to be honest.
Last night I wasted a further 7 hours trying to install Zune on my XP PC.. It said it couldn't install because Media Centre needed updating to Rollup 2 or later. I already HAVE all the Media Centre updates, went to Microsoft, wanted to download it again, they wanted verification but when I ran their verification tool I was told that the verification tool was outdated and to use the later version - yes, and that on the Microsoft website..
After 7 hrs of going round in circles, I went to bed at 5 a.m. and today went to Swisscom and got myself an Iphone 4. I have better things to do than to spend 7 hours trying to install software..
OK, it's another rant but I am mightily dissatisfied with Nokia - even the keypad keeps rolling itself up when I try to enter something. so to enter a 10 digit phone number takes a total of about 30+ taps because the damn keypad disappears before I can tap on a number. Incredible.

Data connection filter

Hi,
We currently working with a PDF template combined with a data connection to an xsd input file. In the corresponding xml we have the following code:
<ListOfCwiWerkzoekendeKnelpunten>
<CwiWerkzoekendeKnelpunten>
    <Type>Loonkost</Type>
    <Planned>01-Juni-2011</Planned>
    <PlannedCompletion>31-Juni-2011</PlannedCompletion>
    <Comment2>Dit is een toelichting</Comment2>
</CwiWerkzoekendeKnelpunten>
<CwiWerkzoekendeKnelpunten>
    <Type>Subsidie</Type>
    <Planned>01-Juni-2012</Planned>
    <PlannedCompletion>31-Juni-2012</PlannedCompletion>
    <Comment2>Dit is een extra toelichting bij Subsidie</Comment2>
</CwiWerkzoekendeKnelpunten>
</ListOfCwiWerkzoekendeKnelpunten>
As you can see we have 2 sets of data. We want to filter only on Type = "Loonkost"
The binding for the Type field is:
$record.Contact[*].ListOfCwiDvp.CwiDvp[*].ListOfCwiWerkzoekendeKnelpunten.CwiWerkzoekendeK nelpunten[*]
Is there a way to do this in script, or in default binding or another solution?
We have tried to change the default binding in:
$record.Contact[*].ListOfCwiDvp.CwiDvp[*].ListOfCwiWerkzoekendeKnelpunten.CwiWerkzoekendeK nelpunten[Type = "Loonkost"]
This doesn't work because we think an integer is expected (because of the array)).
Modify our input xml is no option.
Thanks in advance for helping us out

Hi kelsnz,
To use the Customer Details to filter all the other related lists, I recommend to go to the Customer Details list page and then edit the page.
Click Web Part tab in the ribbon and then click Insert Related List to insert all the related list web part to tis page, and then save the changes.
After that, we can use the Customer Details to filter all the related lists web part added to this page by clicking the corresponding Select icon in Customer Details list web part.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Lower case edge / data connection refused on BB 8800

Hello, I need help to activate the data service.
I have a new unlocked T-Mobile BBerry 8800 bought from eBay.
When I inserted a sim card took from my Pearl 8100 it says data connection refused.
I upgraded the OS and now the version 4.2.1.101 platform 2.3.0.80 is installed.
The message "data connection refused" disappeared and replaced by the provider's name. But the problem remains exist. Indicator on the top right screen displays "edge" not "EDGE". (http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02623&sliceId=SAL_Public&dialogID=141640847&stateId=0%200%2066797886)
I took the sim card out and put it into Pearl 8100. Sim card works well, emails and net browser are just perfect. I reinserted it back into BB 8800, but nothing changed, "edge" signal appears, my web icon disapearead. The handheld is functioning no more than a mobilephone.
The technical support staff had help me through this process. They gave up and concluded something wrong with the handheld.
Can anyone please help?

I am not sure what provider u are with and I assume u must have a data pakage so u are able to access these services-what it means is that it isn't connecting with RIM and u must go thru RIM to acess these services is the simplest way I can put it LOL---any way to fix ( make sure u have at least 3 bars of signal strength) go to OPTIONS- ADVANCED OPTIONS-HOST ROUTING TABLE THEN HIT THE BUTTON TO THE LEFT OF THE TRACKBALL(menu button) click register now) this regisers u with RIM u will receive a message in your messages box----if this does't work take your battery off for a min and put it back on it refeshes anything new that was done on the network----hope this helps

Business View data foundation with dynamic data connection hangs

We are running Business Objects XI 3.0 with Crystal Reports 2008 and Business View Manager 12.0.0.683. In the Business View Manager tool, when I try to open a data foundation that uses the ACD Dynamic data connection, it hangs with the hourglass icon. I have left it trying to open for at least an hour before killing the Business View Manager with the Windows Task Manager. Data foundations using a static connection open fine as do the elements and views based on the data foundation with the dynamic connection. The static data connections included in the ACD Dynamic connector point back to an Oracle Server. Any ideas how to get the data foundations to open so I can edit our custom business views?
Thanks,
Kathy

I created some Views to pull the data in from the Oracle side.

Missing "Manage Connections" icon

Hi,
For some reason the "Manage Connections" icon is missing from my BB menu. I did a "Show All", but it still isn't showing anywhere. The only way for me to get into this app is to assign the right side button to the "Manage Connections" app via the "Screen/Keyboard" options item.
Any idea how to get this icon back on my menu?
Thanks!
Solved!
Go to Solution.

1. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
2. It can be theme dependent. What theme are you running? Try changing themes (options > Themes) and see if you see the icon.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Show "connecting" icon on the view

Hi,
Please give me a hint how to do the following:
I would like to show connecting icon with the label "connecting" next to it in the center of the existing view when I perform loading data from Internet in my application. After the operation is completed I would like to hide this dialog.
Is here any recommended way of doing so?
Thanks!

Call setCloseAction(new TabCloseAction()) on CustomTab which TabCloseAction inherits AbstractAction class as neither setCloseable nor setShowSelectedCloseButton is need.

IPhone 5 dropping data connection

iPhone 5 bought new on release day. Have been having issues with data not connecting and dropping of LTE. I do have solid LTE coverage here in Detroit, I live north of town. I have 32gig black and my wife has 16gig white and she does not lose data or LTE. This is a reoccurring issue. I have already restored the phone once and it still has same issue. I have read that others have same issue. Do we all have lemons? Is apple aware and will they do anything? Or do I have to get a replacement phone?

Sorry for thinking that whole subject heading on the question would have directed you to my question. Let me be more clear on this.
How can I stop my phone from randomly dropping the data connection to my provider. I have already tried doing a backup and restore. I have gone through the other mentioned steps (disabling the cellular network location service, backup & restore, tried going to airplane mode and disabling). The only thing that has restored data connection is rebooting the phone. At no time does the phone indicate any data connection loose. The "4G" icon is still on the status bar, going from wifi to cellular network does not resolve the issue (the wifi network works, but when disabled, there is no data) The phone does not go to EDGE, or no data connection, it continues to show 4G. Other people with at&t 3 ft from me continue to have service. So far there is no difference in location of the phone, it happens at home, at work, at different friends houses, and sometimes not at all. However each day I am having to reboot my phone, sometimes 4 times a day just to use the data features.

IPhone 4s losing data connection multiple times/day

It seems about 3-4 times/day, my new iphone 4s will lose data connectivity. The phone will show full bars and the 3G icon appears, but I cannot access a data connection - email continuously loads, safari / facebook app / weather channel app all time out. As soon as I reboot, it works fine. This is getting really really annoying. Anyone else experiencing this or have a fix?? Thinking of returning it.

My Problem Detailed
I have been having this same problem for months. To be more specific, it happens whether I'm on 3G or WiFi. Back before iOS5 when I was on 3G, I could simply turn off 3G and turn it back on, but now with iOS 5, it is turning Airplane Mode on/off only, which like everyone else fixes the problem only temporarily.
Attempted Failed Solutions
It has transcended hardware and SIM cards. It was happening on my iPhone 4 and when I moved to the 4s, it was still there. So, it's most likely not the phone itself. I also swapped out SIM cards. That also didn't do the trick. That leaves me to one last idea...
Last Possible Solution
It's gotta be the software. Some app or process is hacking away at the connection, possibly hogging all of the connection. This was the Apple Store's original guess too (before I upgraded phones or swapped SIM cards). Their recommendation is to restore the phone with the base OS and not from backup. Then without adding any apps, make sure that it works fine (for possibly a day or two). Then start adding apps back one at a time. Has anyone tried this yet? With so much setup, I am hesitant to try this without knowing if it will solve it.
Alternative Solutions
If it is software, possibly we all have a common app/process that few have. Maybe we can all compare what we have. Unfortunately, my app count is still over 100 even after deleting more than half of my apps. Does anyone else have any ideas? I'd love to figure this out as it is extremely frustrating as you all know.

E52 fw 031.012 3g data "connecting" icon always on...

Similar Messages

Maybe you are looking for