E55 user defined access point for outgoing email (...

Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peter

peter_p wrote:
Hello
I changed the outgoing default connection in E55 here:
menu. email. settings. mymailbox. mailbox settings. advanced mailb settings.outgoing mail settings. access point in use. user defined
now when i do a email message it doesnt send when i choose send in any new email message
it seems a bug, because it does not quit of the send option, it appears a little window sending email, but it does not send!
then if i try to get out the only options are delete/save to drafts
can this be fixed?
Peter
Are you using a WLAN or GPRS accesspoint?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Similar Messages

Define access sequence for purchase order

Hi,
Please can I get some advice on how to create an access sequence in MM (in IMG = define access sequence for purchase order)
I have created a condition type for handling costs and want to assign a default value for each individual goods supplier.
So for plant 1000 and goods supplier 40, assign a rate of 3% to the condition. For plant 1000 and goods supplier 50, assign a rate of 7% etc etc
How do I go about doing this please
Thank you

hi,
Steps,
Customizing activities:
1) Create the condition table for vendor and plant field.
table no should be above 500 as its a customizing.
2) create access sequence and assign the condition table to this access sequence.And activate the fields in table.
3) create Z condition type and put this access sequence into the condition type.
End user activities:
4) maitain the condition record based on vendor and plant in MEK1 transaction
regards,
sujit

User defined Number range for TD Bulk Shipments

Hello,
By defining Customer specific logic with certain conditions through Z table, can we have a user defined Number range for TD Bulk Shipments? As SAP std. either we can have internal number range or external. If external is opted for, then every time User has to specify the same while creating a Shipment in O4F1. There is a every chance that Users will commit mistakes. In order to avoid this can we have something automatic (i.e. System will take care).
e.g. In SD Billing we have one User exit:- USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ). With this and depending upon certain conditions (which are maintained in Z table) we can have our own number range.
Similarly, Can any one please suggest either a User Exit or BAdi or some enhancement point for this requirement?
Regards,
Aniruddha.
Edited by: Aniruddha Saraf on Jan 3, 2008 2:28 PM

Hi Anirudhdha,
There is no standard exit for number ranges like those in SD. However, you can try using the exit EXIT_SAPMOIGS_001 for this purpose. You will still need to enter internal number range in the shipment type configuration.
Hope this helps,
Regards,
Ashutosh

Broadcast SSID only on defined Access Points?

I'm using a Cisco Wireless LAN Controller 5508, 14x Access Points 1041 and 6x Access Points 1031 in combination with a NCS 1.0.
Is it possible to broadcast SSID'S only on defined Access Points, e.g. AP 1-3,7-10,18? If yes, what have I to do?
Kind regards
Kai

Quick question, can you validate the below scenario please
We have seven SSIDs
WLAN           Dynamc Interface that its mapped to
WHSE10          VLAN10-10.0.10.0/24
WHSE20          VLAN20-10.0.20.0/24
WHSE30          VLAN30-10.0.30.0/24
WHSE40          VLAN40-10.0.40.0/24
Office50           VLAN50-10.0.50.0/23
Office60           VLAN60-10.0.60.0/23
Guest70           VLAN70-172.16.8.0/23
we have around 40 access points in the warehouse and 20 APs in the office, and we are broadcasting SSIDs everywhere, means office and guest SSID s exist on the WHSE APS and WHSE SSID s exist on office APs.
Does having more SSIDs on the APs affects its power (Signal strength) in anyway?
APgroup1- WHSE-GROUP- (will add VLAN10,VLAN20,VLAN30,VLAN40 interfaces)
APgroup2- WHSE-OFFICE- (Will add all VLANS-10,20,30,40,50,60 and 70)
APgroup3- OFFICE-GROUP-( Will add only office and Guest WLANs- VLAN50,60 and 70)
We won't need to broadcast any WHSE SSIDs in the office area so we will add the Office APS to ---- APgroup3- OFFICE-GROUP
The WHSE APS will need to advertise both office and WHSE SSID s but we don't need to broadcast Office SSIDs everywhere in the warehouse, so we assign some APs in WHSE to APgroup2- WHSE-OFFICE and some to APgroup1- WHSE-GROUP
How does the client roaming work in the above scenario when they move from APs in APgroup1 to APs in APgroup2 (I don't think this will be any different than normal client roaming from one AP to another AP but I want to make sure)
Thanks for the help
Siddhartha

Define access point to connect?

A couple of applications on my phone, particularly Ovi Maps keep doing this and it's getting REALLY annoying.
Start using the application, it comes up with the following:
"Network connection required.Define access point to connect?
Then it'll give me a selection from a list of my networks various protocols.
It will regularly ask me again and again while the app is running, often coming up in front of other applications i am using at the time!
How can I stop this?
I don't want to have to define anything for specific applications. I want my phone to connect in one of two ways without my input:
1. If I am within range of a Wifi connection it knows, connect via that.
2. If not, connect via 'O2 Active'
Is there a way I can set this so my phone just does the above and never asks again?

jezston wrote:
A couple of applications on my phone, particularly Ovi Maps keep doing this and it's getting REALLY annoying.
Start using the application, it comes up with the following:
"Network connection required.Define access point to connect?
Then it'll give me a selection from a list of my networks various protocols.
It will regularly ask me again and again while the app is running, often coming up in front of other applications i am using at the time!
How can I stop this?
It is the Assisted GPS positioning method access found in Menu > Settings > Application Settings > Positioning > Positioning server use which keeps asking for a Network access point not OVI Maps application itself which may be set "Offline" or "Online".
If you have not set "Save location info" = No - in Camera > Options > Settings - you may get the same response.
Happy to have helped forum with a Support Ratio = 42.5

N80: WLAN problem: "Define access pts. for secure ...

Nokia N80 (black)
Firmware: 3.0617.0.6
I have problems getting on the WLAN. Here is a step-by-step description of what I do:
First:
1) "Connect." -> "Conn. mgr" -> "Availab. WLAN"
2) Mark "HQ" WLAN
3) "Options" -> "Define access point"
4) Answer "Yes" to "Define internet access point for WLAN network "HQ"?
5) Get the message: "Define access pts. for secure WLAN networks in 'Access points' in conn. settings."
Then:
6) "Tools" -> "Settings" -> "Connection" -> "Access points"
7) "Options" -> "New access point" -> "Use default settings"
8) Write "HQ" in the "Connection name" field.
9) "Data bearer": "Wireless LAN"
10) "WLAN netw. name": "HQ"
11) "Network status": "Public"
12) "WLAN netw. mode": "Infrastructure"
13) "WLAN security mode": "WPA/WPA2" (the WLAN is using "WPA-PSK")
14) "WLAN securoty settings" sub-menu:
- "WPA mode": "Pre-shared key"
- Pre-shared key": the correct one (verified with laptop connection)
- "TKIP encryption": I have tried both "Allowed" and "Not allowed".
15) Homepage: "None".
When I go back and go through steps 1-5 again, I get the exact same message.
What am I doing wrong? Can someone give please me a _really_ detailed step-by-step guide for how to do this?
I have been able to use gcalsync (www.gcalsync.com) with the same "HQ" WLAN, but then it is gcalsync that asks for SSID and key. So: The WLAN works, I just don't understand how to set it up.
I will be very, very grateful if someone can help me with this. Thank you.

Hi Chrlov,
An example of my set up based on my old Linksys router.
1. Go to Menu > Tools > Settings > Connection > Access points.
2. Select Options > New access point > Use default settings.
3. Give a name to 'Connection name'. In my case, 'Home WLAN'.
4. Change 'Data bearer' to 'Wireless LAN'.
5. Change 'WLAN netw. name' to the SSID I had set up on my Linksys router. In my case, some thing like 'gen1xxxxhomewireless' (this is not the real one, censored by me. LOL)
6. Since my SSID is hidden, I change 'Network status' to 'Hidden'.
7. My Linksys had WEP set up (and that it is permanent). So I leave 'WLAN netw. mode' and 'WLAN security mode' as 'Infrastructure' and 'WEP' respectively.
8. I set up WEP security settings in 'WLAN security sett.'
a. Since I'm using key 3, I change 'WEP key in use' to '#3'.
b. I leave 'Authentication type' as the default of 'Open'.
c. I key in all 4 keys in 'WEP key settings'. Since I'm using 64-bit hexadecimal key, I set 'WEP encryption' to '64 bits' and 'WEP key format' to 'Hexadecimal'.
Hope this is a good reference.
Good luck and cheers. ^_^;

Settings for outgoing Email

Hi
i am working in crm2007 version and trying to send an outgoing email from UI and once i send the mail and look back into my outlook sent items found no update here...and when i try to send mail from CRM system to my outlook id but not recieved any mail in to my outlook....but outgoing email Activity is created in CRM system...
could any one let me knoe what settings do i still maitain to have the above send functionality in total....
Thanks
Phani

Phani,
there is a small customizing that needs to be set.
link under spro --> CRM -> Basic functions -> One-to-One E-Mail -> define multipart email ....
these properties can be set.
Address Search in Groupware --> where should the app serach for email addresses not identified as CRM contacts
Groupware for E-Mail Integration -> define mail client for inbound email
Groupware/E-Mail Copies -> define mail client to put the copy in the sent items
Supported E-Mail Formats -> mail format
Additionally transaction type for inbound mail is 0004, outbound 0005
pls create a blank outbound mail (no reply) from CRM and check if this reaches the recipients and is getting put in the sent folder after checking those settings.
is case on that does not help pls create an OSS and send it to me.
cheers
martin

How to let the user define the colors for each plots in the graph (I use LabVIEW 7)?

How to let the user define the colors for each plots in the graph (I
use LabVIEW 7)?

Hi,
Take a look at this example, it uses property nodes to select tha
active plot and then changes the color of that plot.
If you want to make the number of plots dynamic you could use a for
loop and an array of color boxes.
I hope this helps.
Regards,
Juan Carlos
N.I.
Attachments:
Changing_plot_color.vi ‏38 KB

How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

Can I use this as a wireless access point for my network

can I use this as a wireless access point for my network

umm... use what?
A Time Capsule? Sure. It's just like many other wireless base stations. It can run in either bridge or route mode - in bridge mode it's just like an access point linking the wired and wireless networks together.

APP-ALR-04106: Please correct the user-defined SQL statement for this alert

Hi All,
I have created an alert for engineering module in R12. It got tested and was working fine. when the user testing it, while trigger the alert getting the error, "APP-ALR-04106: Please correct the user-defined SQL statement for this alert".
when verified the alert, it got verified and ran also. It parsed the query successfully and when run it fetched few records.
Need help in resolving the issue.
Thanks in advance.
Regards,
sri
Edited by: user10939296 on Jan 18, 2010 1:16 AM

Hi Sri;
I have already gone through the Note: 948037.1. But this note is related to 11i. The solution provided in the Note is for 11i.
I am facing this issue in R12. Is this patch applicable to R12?I belive its not. But u can check Solution part 4 for your instance, at least it can give you idea. The other note in metalink related bug and all for R11 too.
I belive its better way to rise Sr while waiting other forum user response to that thread
Regard
Helios

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

User defined class objects for a ADF component (button,inputfield)

How do I define a user defined class object for ADF objects?
My requirement is that when I do a modification to the class object, it should get reflectected to all the instances on my page.
E.g:- I'm having class object clsInputField, and all my input fields in my pages are based on this object. So when I change clsInputField it should get reflected to all my controls based on this class object.
Please help!!!

Hi Timo,
In our client server environment, we have a custom control for managing the zip code (used a Custom InputText field which extends the actual TextField) . All zip code specific validations are written in this custom class. In our application many of the pages uses this Custom component. So if any of the zipcode specific behaviour changes, we could implement this by only changing the Custom InputText field class.
We need to implement this behaviour in our ADF applications. Please advise.
Thanks,
Vishnu

SBO crashes on changing user defined field setting for a form

Hi,
when i try to change the user defined field settings(Tools->User-Defined Fields->Settings) for a form, say Sales order form, on clicking on OK button SBO crashes displaying runtime error messagebox.
This happens only when my addon is running.
Anyone encounter this behavior?
Thanks,
Satish.

Hi Barend,
I have put in the filters.The form 38(user-defined fields settings form) is not included in the filters.So it should not get any events. I get the following error
Microsoft Visual C++ Runtime Library
Runtime Error!
Program ..m Files\SAP Manage\SAP Business One\SAP Business One.exe
This application has requested the runtime to terminate it in an unusual way.Please contact the application's support team for more information.
Thanks,
Satish.

Using Mac mini as an access point for home network

Hi
I'm looking for some help on using my mac mini as an access point on my home network.
I have a G5 tower which is wired in to my router and acts as a home server. It has all my itunes library, films, etc
I stream these to various machines in the house, one of which is a mac mini in our living room.
The mini is connected to the network via powerline adapters meaning the airport is left free.
So i set up internet sharing on the mini via airport so I can use the machine as an access point for the living room.
If I connect another machine to the mini via airport, Internet is working fine but for some reason I can't see the any other machines on the network.
All I see in the sidebar is the mini, not the server.
I've tried it on both mine and my friends macbook but had no luck.
Am I doing this the wrong way?
How would you go about doing this?
Cheers

Internet Sharing may not be providing an address via DHCP, It also may not be providing a subnet Mask that can get you to communicate with the other computers on your local Network.
Take a look at what IP addresses are being used by the various computers on the network. I would expect you have a Router that may be using 192.168.0.1 as its base "private" address, and issuing DHCP Addresses in that range and higher with a subnet mask of 255.255.255.0, meaning anything with the same three high octets can communicate freely without Router intervention.
But what addresses are bing used for the Wireless Shared computer(s)? and what subnet mask?

E55 user defined access point for outgoing email (...

Similar Messages

Maybe you are looking for