E60 lost wireless connection to network

my E60 lost wireless connection to network. tried GPS, DUAL, automatic, manual search for network. Same SIM works fine with different phone. Any idea anyone?

Hi Neil
I'm not familiar with HH (I use a third party router) but it looks as though the HH is set to NOT broadcast the SSID. I'm sure that if you go into the HH settings (the address foe the HH should be 192.168.1.254) you should find somewhere a check box or whatever that allows the router to b'cast the SSID or not. Some would argue that you should not b'cast the SSID but IMHO it makes no difference as the SSID is so easy to discover even if it's not being b'cast.
Just another thought is that you might have to set the wireless connection up as a separate connection to the wired connection. I don't know which OS you are using but if Win 7 then go into 'Network and Sharing centre' and then select 'connect to a network' and take it from there. If not on Win 7 then, if I recall correctly, right click on the networking icon in the system tray and there should be an option to connect to a network.
Hope this helps, if not then I'm sure there are other HH users on this forum who will provide advice.
wedding
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!

Similar Messages

Satellite L500 - Lost wireless connection

My Satellite L500 recently lost wireless connection. I looked up the Realtek wireless device in Device Manager, and it says the device is working properly. I have tried using "ping 192.168.1.1" to reach the router, and I get "Transmit error - general failure".
Any ideas?

Hi buddy,
And now does Windows recognize some WLAN networks in range? Your posting lost wireless connection is not very useful
You should try a WLAN driver update that you can download on official Toshiba page:
http://aps2.toshiba-tro.de/wlan/
If you still cannot find or connect to WLAN networks disable the WLAN power saving mode in Windows power profiles. You have to set it to maximum performance.

PB G4 17-inch lost wireless connection!?!

Dear all,
Execute me if my question have existed!
I searched all this box but seem I didn't find a best solution for my problem.
My problem is :
The PB G4 17-inch always lost wireless connection when I don't use for minutes and it goes to sleep mode!
I want to share files with my friend throws wireless connection but I don't need use laptop all times.
Have anyone meet this problem befored? Did you solve it?
Please help me with your suggest!
Thanks for your words!
(my PB use MacOS X 10.4.6! with all updated soft.)

Im having the same problem. My Netgear used to connect wirlessly to the network and the inernet, now all it connects to is the network. And comes back with an error saying not connected to the internet.
The only way I can use the internet now is through the Ethernet connection out of the Netgear.

Lost wireless connection on a wrt110 router!

Oh HELPPPPP! I lost my wireless connection last week, it just vanished! Called Dell they couldn't figure it out, I worked on it I can't figure it out. It was there then it was just gone!! All drivers are updated, but I keep getting the error message " the network adapter intel(r) wifi link 4965agn is experiencing driver or hardware related issues" ... This is driving me nuts, any suggestions???

Well, this problem is not related with your Linksys router. It is driver error on your computer. I would suggest you check the Device Manager in WIndows to see if your wireless adapter in your computer was installed properly. If it shows a yellow triangle in the device manager you have to reinstall the driver.

Lost wireless connection

my hp office jet 4500 wireless printer lost its connection. Tehre is nothing in the printer que. How do i reconnect my wirelss printer?

Did you power off everything?? Power off printer, power off router. Power on router, wait 2 mins. Power on printer to see it connects to your router.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Lost wireless connection with mx860

i lost my wireless connection with my mx860 - please help, i have tried it all
thank you

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

Hp pavillion p6787c-b DID SYSTEM RESTORE AND LOST WIRELESS CONNECTIONS

i DID A SYSTEM RESTORE IN MY PC AND I LOST WIRELESS CONECTIVITY, I UPDATE DIVER BUT DOES NOT SHOW MY WIRELESS ROUTER IN THE NETWORK WINDOW

Here are the specs for your HP Pavilion p6787c Desktop Computer. Please provide a scan shot, photo or indicate what is displayed for your wireless adapter. Also indicate if the driver is properly installed and the device is working correctly.
Please post the Windows Device Manager's "Hardware Ids" for the wireless device as shown in the example below;
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Express and lost wireless connection

I use a wireless connection through my mac for my interent. I have had no problems with my airport express running through my stereo in the past. However, i just encrypted, locked, secured, passworded (whatever you want to call it) my wireless connection. I no longer can connect to my airport express. I just get the amber blinking light. I know there is something I need to tweek, I am not sure what. My internet provider was no help. Any suggestions?

vandy101, welcome to the discussions!
You will need to open AirPort Utility - Manual Setup to adjust some settings on the Express. Click the Wireless tab below the row of icons. Select the network that you want to join or extend and you should be asked to confirm the password, etc.
Basically, the Express must be setup with the same security, password, etc as the base station in order to connect to the network.

Equium A110 - Lost wireless connection

Hello all,
can you help?
I have lost connection on my Equium A110 and also another laptop (not Toshiba) it askes for or incorrect IP address.
I have an linksys router which has had its filmware up to date

Hello
For me its definitively not a notebook issue because on the other notebook you have a problem with the wireless connection too.
Its not so easy to say what the reason is for this
In your case I would try the command line the command ipconfig /renew
Does it work?
If it doesnt work you should try to disconnect the router from the AC/DC adaptor for at least 5 minutes. Then connect the AC/DC adaptor again and try it.
Good luck!

Ask wireless connect to network G5

if im not use AirPort Extreme card.becos i dont hv AirPort Extreme station.so i want use PCI-Express for use wireless connect internet.which card is recommed?thx u

Well Sure , i will try to keep my self in touch with ur thread at least for now
Hmmm , dont try with wireless as for now ??
Do one thing , Again check firewalls , cause its the main reason behind ..it .
another thing u can try ,
Go to device manager , Right click on Ur network adapter Which one u are using .
go to properties.
go to advanced.
under advanced select - Property as network media..and select value or decrease the value slightly..to 10BaseT ,
which is alos known as , Decreasing ur LAN card speed.
click ok .
Reboot ur Computer.
check n try pinging again .
hope it works ..!
again , one more thing , have u provided the static ip to ur this computer?
if yes den remove...
if no ..
den provide the static in the DHCP range of ur routers LAN ip !
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Printer lost wireless connection

Photosmart 6510 B211a (Windows 7 64-bit) worked well 3 days ago. Now, error message shows no wireless connection. No changes in OS. Did the recommended troubleshooting. Wireless network test results show "no problems found." Shows wireless on and working, signal excellent; connectivity passed; network name found; printer settings consistent with wireless router seettings (belkin.7bd). Tried uninstalling HP software and reinstalling; still no connection found.
At my wits end. Anything else I should do?

OK, are you using security software that may have a firewall associated with it? If so, disable the firewall temporarily as a test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Lost wireless connection with Lexmark Printer

MBPro with 10.8.1. Lost my wireless connection with X6675 Lexmark printer. How do I reestablish the connection. My router is a Time Machine.

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

Lost wireless connection after installing Snow Leopard combo update.

Hi everybody. I installed Snow Leopard on my father-in-law's Mac Mini (one year old) over Christmas, as a gift. The upgrade went fine. Everything worked until I performed a SW update. It downloaded a mammoth 500+ MB combo update (wirelessly), installed it, and boom. No wireless.
His network has no security; it is open. The Mac could see/find the network, but timed-out when connecting. Connection Doctor and Network Diagnostics; all red lights. His Dell and my iPod Touch had no problem connecting. I tried switching user accounts, turning Airport ON/OFF, trashing Locations and using Automatic, inactivating interfaces, disabling firewall, restarting, PRAM reset, and probably some other things I can't recall.
I couldn't leave him without any Internet, and I didn't have a patch cable to try, so I restored him to 10.5 using Time Machine. His wireless went back to normal and is working fine. So he has my Christmas gift, but he can't use it.
I have seen some related experiences in this forum, but not quite the same. Anything I try will now need to be done remotely over iChat Screen Sharing, as he is 190 miles away. Thank you for any assistance.

Problem Solved..sort of. I was able to restore full connectivity by disabling the WEP encryption of the WIFI. This is very strange to me, prior to getting the ATV, WIFI was only rurned on for brief periods to allow my laptop to connect or when using a Sondigo wireless music bridge (great product BTW.) After enabling WEP I had no problems in connecting either the ATV or the Sondigo unit to the WIFI, there was however a problem with my laptop in that it showed a very solid connect to the WEP enabled network but I could not browse the internet. FWIW my router is a Linksys WRT54GX. Hopes this helps someone else

C6380 lost wireless connection; now MacBook can't find it

I have a C6380 that keeps losing wireless connection. I have to delete and re-install this printer about quarterly. Connecting through a router via aircard internet.
Q: Can I buy wires to hardwire this wireless printer to my laptop? If so, what do I need?
Q: Sometimes printer sees network, other times it doesn't, is there a way to make this more consistent?
Q: Obviously when printer drops, Mac can't find it; I've uninstalled, reinstalled so many times and at this point am tired of trying to get printer to see the network and Mac to see the printer. Is there something on my Mac end that could lock this down for future? [sorry, I know you all are HP but had to ask]

Here is how to set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- Click the Manual IP button and enter:
192.168.0.200 for the IP address
255.255.255.0 for the subnet
Leave the gateway and DNS blank
- Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Severity: 3 Administrative access denied, and lost wireless connection

What does that mean? I am currently watching my Logs file update every other second with a new line that looks like someone is trying to access my Airport.
The date is wrong too, says Dec. 31 when it's May 31. Line is as follows:
Dec 31 19:03:15 Severity:3 Administrative access denied to fe80::21e:c2ff:fec0:4f0d%mirror0/49925.
The original reason why I was looking at the Log was because I got bounced off my Airport again. It happens now and then, when there are a bunch of wireless connections in the building, I can see them listed, but when it happens, my own Airport is missing from the list.
The other issue is that I am not interested in paying for someone else's internet access. I have it password protected, but the person I *think might be trying to hack it, is a computer genius/programmer who's built systems, so I'm a bit worried because I don't know anything about this stuff.
Is there any way I can make sure I'm not bounced off my connection again, and that noone else gets to use my connection?
Thanks!

As long as you're passwords are strong, I wouldn't worry about it. There is always someone somewhere trying to gain access to a router, to get internet access or what have you.
More then likely if someone did try and access your routers, and got denied, they just moved on to the next router he could find and try to access that one.
Just make sure you're passwords are strong enough.
If you're concerned that your password isn't strong enough, or to common, check out this website.
https://www.grc.com/passwords.htm
Hope that helps,
AL

E60 lost wireless connection to network

Similar Messages

Maybe you are looking for