E72 unable to discover BH-216 headset?

Greetings!
I have just bought a Nokia E72 to replace my old Nokia 6120c. Now, the 6120c was a great phone, but lacking a full keyboard as well as WLAN and GPS made me go for the E72.
Now, I have a strange problem: The E72 is unable to discover my BH-216 BT headset, that was previously paired to the 6120c, and works perfectly with the old phone.
The E72 however is unable to even detect the BH-216, and I do not know why? I already deleted the pairing on my 6120c, but I don't think this has any effect? Do I need to do anything special to get this to work?
I'm puzzled by this problem...
Thanks!

Dammit.
Next time I should really read the freaking manual...
Obviously, the BH-216 stores its pariring. Switch BH-216 off, then back on (hold on/off button for 6 seconds until green LED starts to flash rapidly) => Device open for discovery and new pairing.
Haha.
My fault.

Similar Messages

Bluetooth Unable to Discover/Pair Up

Why is my iPad unable to discover/pair up with other Bluetooth accessories???

What accessories are you talking about? The iPad only pairs some bluetooth devices like most keyboards and headphones. It does not pair with headsets.

E72 - Unable to set up e-mail mailbox after firmwa...

Hi all,
I have a newly acquired E72-1 which has been updated to the latest firmware version 051.018.
I'm trying to set up the e-mail function on my E72 but getting nowhere.
I keep getting to the enter e-mail details/password etc page then…nothing. The mail box has not been set up, each and every time.
From the home screen, I hit setup e-mail>start e-mail setup>start
Then it asks ‘connection needed’ connect to: and I click yes and it shows ‘Preparing setup’…
Then it shows a screen with all the e-mail services, from the top: Ovi Mail, Yahoo Mail, Google Mail, Windows Live, BT Internet, Mail for Exchange, Lotus Notes, Other
From here, if you click on the various choices such as Gmail or windows live for Hotmail, you get the enter user name + password boxes…once these are filled in
You get the detecting e-mail settings tab for a few seconds…then it reverts to the screen showing the e-mail services.
I have tried this dozens & dozens of times without success…no mail boxes have been set up. It just cycles through the setup process each time.
I have even done a Hard reset on the E72 and tried to set up e-mail after…with no luck.
Any suggestions?? I have to say I’m getting very cheesed off as e-mail was the main reason to get the E72!!
Has the Nokia Messaging service been switched off??
Solved!
Go to Solution.

I came to this discussion because google indicated it when I searched 'nokia E72 unable to create mailbox'.
'Unable to create mailbox' used to be a huge headache for me to use E72 for over one year and half. I tried to soft and hard reset the device, brought it to Nokia Care Point to spend 15 pounds to re-install the whole system, or call the customer service line again and again for a continuous one year, but the problem still existed. To be honest, I was not satisfied with Nokia customer services at all. The staff at the Nokia Care Point only cared about charging money. After the first re-instalation when the problem still existed, they said I had to pay more to process other checks. In terms of technicians from the customer service line, they were helpless. I called them again and again. Each time when I called, there was a different technicain, and I had to repeat the situation again and again. They only knew to suggest me do the basic reset, including to try *#7370# or to reset factory factory settings, which I had tried over hundreds times. They even used remote control application to install some remote app on my E72 and did some checks from their ends, but still it didn't help. When the technician realised he/she didn't have another method, they promised to call me back later, but they never did. I was so disappointed with their service. It took around an hour or longer each time I called. When the problem couldn't be fixed, I had to call again and repeat the problem from the beginning again to a new line advisor. It was so time and money consuming!!!! And what was the most annoying was that they were not helpful! After such torturing experience, the problem still existed! It was a frustrating and exhausting experience from 05.2011 to this year 06.2012... I gave up Nokia in the end, though it used to be my favourate phone.
Sorry to make such a long complaint. I just want to provide a feedback to Nokia, so as to let them know that their poor service and products are losing former loyalty clients.
===============================================
Right, back to the problem, 'unable to create mailbox'. Finally, I figured out what the problem was. It was a conflict between the device E72 and network provider, O2, for my case.
I am in the uk and use monthly contract of O2 sim card. The O2 network provides three kinds of data package: O2 Active, O2 Mobile network, and O2 Pay&Go. When I create mailbox or use Maps GPS, it access to the internet via O2 Par&Go by default, no matter how I set the priority of the connection destination. But when I changed the access point to O2 Active or O2 Mobile Network, the mailbox was able to be created and Maps app was able to recevie GPS data.
So here is my solution.
1) Hardset the device. Remember to backup all the data beforehand.
The method is to press Shift+Space+Backspace together with the power button when the device is powered off. Press until the device is restarted and the main screen, normally it should be Nokia's two hands joined together image, is seen.
2) Go to menu --> Ctrl. panel --> Settings --> Connection --> Destinations
There, you will find all the access points.
3) Go to Internet
Hopefully you will have the same options as I do, O2 Active, O2 Mobile Web, and O2 Pay&Go
Scroll to O2 Pay&go, click options, choose 'delete' to delete the O2 Pay&go option. (Don't worry to delete it, as the internet can be access to via the other two options without any problem.)
4) Go back to Destinations, do the same to Multimedia msg, WAP services, and Intranet.
Delete any O2 Pay&go options for these category.
===========================================================
Then, your phone should be ready to set up mailbox and to use gps without any problem. That was what happened to my Nokia E72.
Good luck!
Now, I feel my E72 is so powerful after the push mail and GPS function is recovered. But still, I am not satisfied with Nokia's service and will definitely not try any other of its products. Nokia has lost my loyalty and I believe I am not the only one.

OEM 12c unable ot discover Weblogic 10.0.1.0

I have OEM 12c grid installed and Agent 12c running on the remote host. I have weblogic 10.0.1.0 installed in the remote host. The agent is unable to discover the domain. It is failing with below error...
"Failed to discover WebLogic. Check host,port,credentials,protocol and be sure the server is running and the same farm is not already added. This UI can not be used to discover WebLogic version 7.x to 8.x. Exception: No targets discovered"
I can login to the console appication with the ip:port and credentials.. but failing while trying to discover thru the Grid Control.
I get below error in the OMS log...
2012-06-25T05:52:09.376-04:00] [EMGC_OMS1] [ERROR:32] [] [oracle.sysman.emas.model.discovery.AddWLStep1Model] [tid: Thread-38498] [userId: SYSMAN] [ecid: 0000DUEGUt_ADSqlcKU4V_0005hD0004kK,1:32596] [APP: emgc] [URI: /em/faces/as/discovery/addWeblogicStep1] Disocvery failed[[
java.lang.Exception: No targets discovered.
at oracle.sysman.emInternalSDK.sdkas.general.pojo.model.discovery.FMWDiscoveryBase.discoverTargets(FMWDiscoveryBase.java:588)
at oracle.sysman.emas.model.discovery.AddWLStep2Model.discoverTargets(AddWLStep2Model.java:1101)
at oracle.sysman.emas.model.discovery.AddWLStep1Model.discover(AddWLStep1Model.java:464)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.sysman.emInternalSDK.sdkas.general.pojo.progress.WorkWrapper.run(WorkWrapper.java:113)
at java.lang.Thread.run(Thread.java:662)
I then created a empty doman on the same remote host for the same weblogic version. I was able to attch this one and not the other domain.
I am ruling out OM Grid Server - Agent connectivity issues, since the new empty domain I created can communicate to server.
I tried to check what is different between domains...
The WLD that has the issue is a clustered Domain , and has:
- 9 Managed Servers
- Not SSL enabled
- Many Application deployed
- JDBC connections
- has a custom build authentication provider for Authentication. But i made sure the user id is valid and even can login to the console.
** The new Domain is an empty one - no applications deployed.
Can you please help understand why I am not able to attach the domain?

Hi,
It is the problem in prasing the DTD of config.xml file
It look like this
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/
ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/92
0/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
Please change your DTD to this lines and start the server.
Regards
Ravi D

CRS-10010: unable to discover DHCP server

Hy
I try to set up Grid Infrastructure using GNS. When running the root script
I get a Problem with dhcp.
Here an example of my problem:
[root@oranode1 bin]#
[root@oranode1 bin]# ./crsctl get clientid dhcp -cluname grid112 -viptype HOSTVIP -n oranode1
CRS-10007: grid112-oranode1-vip
[root@oranode1 bin]#
[root@oranode1 bin]# ./crsctl discover dhcp -clientid grid112-oranode1-vip
CRS-10010: unable to discover DHCP server in the network listening on port 67 for client ID grid112-oranode1-vip
CRS-4000: Command discover failed, or completed with errors.
[root@oranode1 bin]#
The dhcp server is tested by my admin.
Any Idea how to debug this problem ?
Thanks
Peter

Thanks , but this does not work
[root@oranode1 ~]# /u01/install/11.2.0.2/grid/runcluvfy.sh comp dhcp -clustername grid112
You must NOT be logged in as root (uid=0) when running /u01/install/11.2.0.2/grid/runcluvfy.sh.
[root@oranode1 ~]# su - grid
[grid@oranode1 ~]$ /u01/install/11.2.0.2/grid/runcluvfy.sh comp dhcp -clustername grid112
Verifying DHCP Check
PRVF-0055 : User "grid" does not have sufficient authorization to run this command
Verification of DHCP Check was unsuccessful on all the specified nodes.
[grid@oranode1 ~]$
do you know why?
Thanks
Peter

IPhone 5 is unable to discover bluetooth enabled devices Mac Book and iPad

My new iPhone 5 is unable to discover bluetooth enabled Macbook and iPad sitiing next to it

That's not a feature of the iPhone. The only thing you can use bluetooth for with a computer is tethering.

Unable to discover Why No Join Predicate

Please help me, I have this query:
select pc.Val,
PC2.Valstring as valstring,
pc.ValString as MessageType,
pc2.Val as Port
from dbo.tblproperty p with(nolock)
inner join dbo.tblpropertycfg pc with(nolock) ON p.pkPropertyID = pc.fkPropertyID
inner join dbo.tblpropertycfg pc2 with(nolock) ON p.pkPropertyID = pc2.fkPropertyID
where p.pkPropertyID = 5
and pc.Concept = 'PBX'
and pc2.Concept = 'PBXIP'
I am attaching the Excution Plan, this plan showing "No Join Predicate" Warning, I am unable to discover where is the problem, please help.

Hi SathyanarrayananS:
Thank you for your support, when you say "are there any chance they are UDF or View" you mean if I could create and UDF or View with those tables?, because both tables are physical.
I am already readed the link and IMHO my query does not meets on any of examples provided.
As you can see, the first joins using the table, does not cause NJP, but when we apply the third join is when the NJP arise.
Do you need additional information about my schema?
Best regards.

Unable to discover local disks in T5220

According to http://docs.oracle.com/cd/E35328_01/E35332/html/vmusg-storage-types.html#vmusg-storage-local
I should be able to use extra disks in a T5220 to store VMs:
Local storage consists of hard disks installed locally in your Oracle VM Server. In a default installation, Oracle VM Server will only use the first disk (/dev/sda), leaving other disks available for storage.
As long as no partition and data are present the device will be detected as a raw disk. The choice is yours to use the local disks either to provision logical storage volumes as disks for virtual machines or to install a storage repository. If you place a storage repository on the local disk, an OCFS2 file system is installed.
But I am unable to discover these disks using Oracle VM Manager 3.2.2.520, managing a host running Solaris 11.1 with latest version of VM Server for SPARC:
# pkg list | grep ldom
consolidation/ldoms/ldoms-incorporation     0.5.11-0.175.1.9.0.4.0   i--
system/ldoms    0.5.11-0.175.1.9.0.2.2    i--
system/ldoms/ldomsmanager    3.0.0.4-0.175.1.9.0.4.0    i--
I suspect that it is because "partition and data are present" on the disk, but I don't know how to delete partitions with the format command, only change them to unassigned and zero length, and that didn't work:
partition> p
Current partition table (original):
Total disk cylinders available: 46873 + 2 (reserved cylinders)
Part      Tag    Flag     Cylinders         Size            Blocks
0 unassigned    wm       0                0         (0/0/0)             0
1 unassigned    wm       0                0         (0/0/0)             0
2     backup    wu       0 - 46872      279.38GB    (46873/0/0) 585912500
3 unassigned    wm       0                0         (0/0/0)             0
4 unassigned    wm       0                0         (0/0/0)             0
5 unassigned    wm       0                0         (0/0/0)             0
6 unassigned    wm       0                0         (0/0/0)             0
7 unassigned    wm       0                0         (0/0/0)             0
I can't make slice 2 size zero, otherwise when I run label to write the changes I get an error. Can anyone tell me what I'm missing? Thanks!

The reason you can't do this, is that the currently shipping support for Oracle VM Manager on SPARC systems is only for NFS. The paragraph you are quoting is from the base Oracle VM manual and that section applies to x86. /dev/sda is a Linux convention, not Solaris, so it wouldn't apply here.
If you go to the Oracle VM Server for SPARC documentation at Oracle VM for SPARC Documentation and then select View Library for Release 3.0 at
http://docs.oracle.com/cd/E37707_01/index.html
you will see a page with all the documents for the current release. Pick the "Oracle VM Manager 3.2: Quick Start Guide for Managing Oracle VM Server for SPARC" at http://www.oracle.com/technetwork/server-storage/vm/ovm3-sparc-quick-start-guide-1900072.pdf
You are running the correct version of Solaris 11 and the logical domains manager, so you should be able to discover the server, networks, and file-based repositories, but you'll have to wait till a later release provides support for local disk, FC SAN, and iSCSI. I hope this helps explain the situation.
Jeff

To be unable to discover a Nexus 5548 wirth DCNM 5.2(2e)

Hello,
I am unable to discover 2 Nexus 5548 with the SAN client of DCNM 5.2(2e)
These Nexus are used like LAN and SAN switch. Each Nexus is a SAN fabric. I would want to use DCNM in order to configurate the zone/zoneset via GUI. These Nexus 5548 run 5.1(3)N2(1b) release.
The Nexus ARE NOT managed via the Mgmt interface (OOB) but they are managed via an interface vlan (InB)
I could not configure rightly
- the snmp-server user (SNMP user V1/v2 or V3 + group ? ) CLI on Nx
- to configure the discovery in order that DCNM discover each fabric either from web GU interface or java SAN client
Please help !

I believe DCNM requires an ssh login to the Nexus and not SNMP.
DCNM uses Netconf over SSH protocol. See this earlier posting.

Unable to discover machines through SCOM after changing the IP range

Hello,
Last week in my company IP range was changed to class A network from class C network,before changing the IP range everything was working fine.but after changing the IP i am unable to discover any client machine through agent discovery and unable to install
agent over SCOM console
any help will be thankfull
regards,
angs

pinging is happening from both the servers from MS and client pc.
but from ms am not getting the server name if using -a command in front of ip.
nslookup is resolving.
recently in my firm the primary dns server is changed,i checked in dns host entry.management server is
registered perfectly
regards,
Nikhil

I am unable to use my bluetooth headset to record voice memos, is there a trick to this?

I have a Plantronics Voyager Pro+ Bluetooth headset, I am unable to use it to record voice memos on my Iphone 4, using IOS 6.1.3. The memos record fine when using the built-in mike but not the Bluetooth headset. Does anyone have any insight or comments that might help resolve this situation?
Thank you.

Hello jaymecaroline,
Thanks for using Apple Support Communities.
The steps below will help you in resolving this issue of your iPhone giving you a No SIM alert.
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Take care,
Alex H.

E72 : Unable to configure email post 071.004 firmw...

My emails on e72 were working perfectly fine before this upgrade. but post upgrade, I was unable to recieve my emails. So I removed the accounts and tried to reconfigure them. But the configuration wizard doesn't get past the 'Detecting Email Settings'. This is really annoying and I have lost an import feature of the phone. Can someone help me out?
thanks,
Arun

I did same firmware upgrade. It killed the Nokia email software for using yahoo email. I was able to get Yahoo email working with IMAP settings BUT it is so bad it is hardly worth it.
On my main phone screen I have two email notifications
1) Mail for Exchange
2) Yahoo account
I see the Yahoo account count down to zero(number of unread messages) and then back up to a number. It is like it kills all the messages int he back ground and then re-downloads them. While this is going on the phone, it is so "CPU" bound that I cant use anything on the phone. If I am on a phone call , sometimes the phone goes so CPU bound, it wil drop the call!
Nokia has really done something with this latest firmware upgrade first by killing yahoo email and then by the email takes so much CPU, the phone is un-useable.
Another issue I have seen with the upgrade is
1) I get exchange server busy messages. In 12 months prior, I never saw this! I get over 500 pieces of email a day and NEVER have I see this until the firmware upgrade
2) On a SEND from mail fro Exchange, I also get an error message that the server is busy and it dumps the message into Drafts box. also new since upgrade
3) I now get out of Memory errors when simply going into the calendar or other things.
All I have or use on this phone besides making calls is the Mail for Exchange, Yahoo email, google maps, contact list, calendar, some text meessages and the Nokia bult-in GPS.
This phone all worked fine until this firmware upgrade which I had to do as before the upgrade my mail also stopped working so Nokia customer support told me I had to do the upgrade
Thank You Nokia for making my phone worth about $1.00 in a flea market... time to buy an iPhone or a blackberry. This WAS the best phone on the market for a non touchscreen, but Nokia has killed the phone... At times I cant even make a phone call as I have to shut the phone off and re-start it,.
Yes NOKIA, thank you for making my E72 simply just a phone from all the wonderful things it used to do. Oh yes, I find I have to reboot the phone at least every other day. Priot to your upgrade, the only time I ever turned the phone off was on a plane. If I dont re-boot, I get Memory errors and the phone is so slow is is also un-useable!

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

E72 unable to connect to WIFI or GPRS after firmwa...

I hope someone here can help with my problem. My E72 cannot connect to WIFI or GPRS after I got a firmware update. Whenever I try to connect, I get error messages like "Connection not available" or "Web: Unable to perform operation". My software version is 054.005 for RM-530. I have tried reinstalling the firmware update thru Ovi suite, but it did not help. Also tried *#7370# and the phone still won't connect.
Solved!
Go to Solution.

Try with Hard Reset (shift+space+backspace+on/off). Make a full backup before!
Cheers
Einar

E72: Unable to execute due to security reasons err...

All of a sudden, i got this error just now when trying to launch opera mini application. I tried other apps like youtube, skype, forecaweather a couple more which was already on my phone- same thing. All those apps i've used with no problems over the last month or so. I didn't download any new apps or do anything out of ordinary with my e72 prior to the error. All the apps are broken, except for ebuddy. Also, all the themes, along with the broken apps does not show up on 'app manager', but they can still be seen on the phone itself.
I've tried removing it, but as the removing bar progresses like a couple seconds, it says "unable to remove". I've rebooted it, tried too install it from ovistore again, all failed. Before the error, all i did was send a video file (which is definitely compatible with my phone) of about 20mbs & a mp3 file which i know of to be virus free via bluetooth, but i do transfers like these all the time and nothing like that has ever happened.
I'm doing a hard reset of the phone right now, but i would like to know what is causing it to avoid the problem in future. Anyone has something like that happened to their e72? Ever since i had it, nothing but a barrage of problems, but i have to stick with it for a good while yet. sighs.

Just turn off the phone and remove the memory card, then put the card in a Windows computer's SD slot or reader, run Winodws Exlorer to view the card's drive, right click the drive icon and choose Properties then you are able to see its file system type.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

E72 unable to discover BH-216 headset?

Similar Messages

Maybe you are looking for