EA2700 Configuration with another router

Hi,
I recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
Is that possible?
I'm not a network engineer so any suggestion/recommendation would be a great help!
Thank you!

naniecisco wrote:
Hi,
I recently bought an EA2700 in hopes that it will make my connection faster, stronger signal and stable. However, this is not the case. The connections keeps dropping and the range is the same as my Verizon-FiOS router. Anyway, I'm hoping that a fix be distributed to address this issue. I can't return my router to the vendor anymore.
Now, since I have two routers, I want to be able to leverage EA2700's dual-band feature and the Guest-access feature but I can't make this as a main router since my FiOS router should still be able to supply IP addresses to my cable boxes, thus, I can't configure it as a Bridge. I'm thinking if I just split the IP distribution as follows:
FiOS router: 192.168.1.2-110
EA2700: 192.168.1.111-150
Is that possible?
I'm not a network engineer so any suggestion/recommendation would be a great help!
Thank you!
Hi there. Is it dropping on the wired or wireless internet connection? Have you tried to play around on the channels if it is a wireless intermittent connection issue? This particular router model has internet connection type option of Bridge mode but when the router is set to such it will act as a wireless access point or wireless bridge thus disabling  DHCP server as well as  Firewall, Access Restrictions, and Applications and Gaming.

Similar Messages

  • Ethernet configuration with SMC router and Titanium

    This concerns a Titanium Powerbook G4/500 and an SMC 2804WBR router.
    I plugged in a known-working Ethernet cable, and in System Preferences/Network, under Network Status for Built-In Ethernet, I got the message "The cable for Built-In Ethernet is not plugged in." A hardware test shows the Ethernet port to be functioning, but the TCP/IP tab, set for Using DHCP, shows no IP address, subnet mask, or router address. Renewing DHCP lease accomplishes nothing.
    I went to the Ethernet tab and set the drop-down to Manually (Advanced) instead of Automatic. With a little experimentation I found that 10baseT/UTP in either full- or half-duplex connects with the router and lets the machine go on the Internet, but 100baseTX will not. The router lights for link and 100baseTX go on, but no addresses appear in the TCP/IP tab.
    I use 100baseTX with a G4 and a Pismo Powerbook, so I know the router can work just fine at that speed using an Ethernet cable. Is there some glitch or weirdness peculiar to the original G4 Powerbook that won't allow it to communicate with the router at full speed? Is there some configuration through Terminal or elsewhere that will fix that?

    Hi,
    the PVDM is used when you E1/T1 interface. in your scenario you need to configure SIP trunk between your Voice GW and ISP.
    you need to confirm the below settings:
    Codec
    SIP sever ip address
    DTMF
    you will create voip dial-peer toward your ISP and another dial-peer toward your call manager.
    in this you are deploying CUBE. you need to configure
    voice service voip
          allow sip to sip
    don't forget to add CUCM and ISP in the trust list under voice service voip
    HTH
    Anas
    don't forget to rate the helpful posts

  • Just bought new time capsule- need help setting up WiFi network with another router

    Here ismy situation.
    I had a wireless network setup up at home using a Belkin wifi router.
    I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port.  In addition, I have a Verizon wireless network extender plugged in by ethernet.  All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
    The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it.  All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
    I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
    Needless to say, this did not work well. I called  AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router.  The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal). 
    If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
    What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID  to another stronger signal SSID as we move through the house
    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.

    Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal?  I understand it involves switching the "channels" but don't know how to do it right now.  Currently, everything works, so I don't want to mess it up tinkering.  Another caveat- there are several other wireless networks from neighbors houses that I can "see".  I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
    Any advice would be appreciated.
    OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
    Naming rule for wireless.. Same SSID same security different channel.
    SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
    Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
    Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
    Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

  • Using WRT54G and WET11 with another router as the Gateway

    I have a wired network in the house with access to the Internet through a router on the 2nd floor. I connect a ReplayTV DVR in the basement to the network with a Cat5 cable running across the floor between the DVR and a switch. I'd like to replace that with a wireless solution.
    I have at my disposal one WET11 bridge and two WRT54G routers. Neither of those routers is the one connecting the house to the cable modem. Is there a way I can connect one of the WRT54G routers to a switch in the basement and have it talk to the WET11 connected to the DVR on the other side of the basement?

    I made some progress, but then ran into a couple of snags. I'm not routing with the WRT54G so I connect it to a switch through one of the 4 ports that is not the one labeled Internet.The network looks like this:
    Cable Modem --> Netgear Router --> Switch --> WRT54G(port 1)
    Laptop --> WRT54G(port 4)
    With that cable arrangement I was able to log in to the WRT54G's administration page from my laptop, give the WRT54G a name and change it's IP address to 192.168.1.251. I left the subnet as 255.255.255.0.I also started to configure some other settings, but I did not write them down. I was able to access the Internet from the laptop at that time.
    I was also able to move the cable going from the laptop to port 4 on the WRT54G with the WET11 Ethernet Bridge and could access the Internet. And, I was able to remove the bridge, turn on the laptop's wireless capability and access the Internet through a wireless connection to the WRT54G.
    I tried to access the WRT54G's admin page wirelessly, but was not able to get to the login screen. I ran out of time and set everything aside for a week. When I got back to it, I was unable to access the WRT54G's loging screen. I can still connect the laptop to port 4 on the WRT54G and reach the Internet, but I cannot do so using the bridge.
    Is there some tool I can use to determine the IP address of the WRT54G? I tried resetting (using the button on the back), and I tried several IP addresses in addition to the one I'm pretty sure I used. I'm assuming that I'm trying to log in using the wrong IP address.
    I have a second WRT54G that I can still log on to. However, I don't want to do anything with it until I understand what I did wrong with the first one. (Both of them are version 6.)
    Another snag is that I was never able to get the setup program to find the WET11. It claimed that it couldn't find the one I had plugged into the laptop's Ethernet port, even though I was able to connect to the Internet using that bridge to the WRT54G. However, that does not work anymore.
    Pointers as to what went wrong would be most appreciated.
    Thanks.

  • Cascade E3000 with another Router

    I am trying to add the E3000 to my existing network to provide Wireless Connectivity for my users.  The main router is a RouteFinder SOHO VPN (RF560).  The RouteFinder acts as a gateway and provides DHCP.  I do not want to change it's role or settings.  When I added the E3000 using a Lan-to-Lan connection to the RouteFinder, all users lost access to the internet.  As a quick fix as I was working on something else at the time, I just unplugged the E3000.  Now I am reading through Article 3733 that I was originally referred to and that has me changing the settings on the RouteFinder which I do not want to do.  Is there any way to accomplish adding this to my network without changing anything on the RouteFinder at all???  By the way...I am located in another state than this router and network.  I can call and have someone plug and unplug stuff but all of the configuration has to be done remotely.  Thank you in advance for your help.

    If you connect the E3000 with its LAN port to your main router then you must disable the DHCP server on the E3000. You should also change the LAN IP address of the E3000 from the default 192.168.1.1 to a unused IP address inside your main LAN (e.g. if your main router is at 192.168.0.254/255.255.255.0 you could assign 192.168.0.253 or .1 similar)
    I think the latest firmware of the E3000 may support internet connection type "bridge mode" which should be preferable in your case as you can use the internet port to connect to your main router.
    Article ID 3733 doesn't say anywhere to change the IP address of the main router. You only change the LAN IP address of the second router.

  • Replacing HH2 with another router

    Hi folks,
    I'm going to be replacing the HomeHub v2 with a shiny new Netgear WNR3500L sometime in the next few days.
    A quick question (or two, actually ) - 1. What's the "recommended" procedure for installing a new router? I'm assuming that it's something along the lines of "1. Power down all network equipment; 2. Power down HH2; 3. Power down OR modem" then just doing the reverse of the above to connect the new router.
    Second question - When I initially set the new router up, obviously I will have to configure the web interface to connect via PPPoE and use the HH's login credentials - Will this cause the OR modem to resynch? I obviously don't want too many resynchs, as I have a max profile which I would like to keep tyvm.
    Thanks in advance for any thoughts/suggestions/help.

    loonboy In message 10 of THIS thread has done a similar thing, and appears to be easy....
    "the home hub 3 is jsut rubbish, i tried every setting in there and ended up buying a new router myself
    i got the netgear n750 and i got to say it was just plug in and throw the setup disk in ti and it was away".
    Please Click On any Text in Blue as that automatically links to information.
    PC (NDEGR)

  • Questions on using a WRT110 on a network with another router

    i dont know all the terminology for what im trying to do here so please bear with it and ill try to make it simple.
    so i just got a wrt110 to replace a dlink i had that kept having the wireless go out on it.
    the set up i had [and am trying to get back to] was like this:
    an 8 port router going to a bunch of computers and into another room where it connected to a wireless router [WRT110] that in turn connected to a few other devices.
    the set up i had before made it so that the main 8port router 192.168.0.1 would do dhcp and that passed through to the wireless router. that way everything was on the same 192.168.0.X network
    what my problem now is that i dont know how to get the linksys WRT110 to passthrough the DHCP to things connected to it. so the 8port does DHCP and everything connected to that is 192.168.0.X but everything connected to WRt110 is 192.168.1.X so its like 2 seprate networks.
    does anyone know what im trying to do is called? and anyone know how to do it?

    Do this -
    Connect a computer straight to the WRT110 Router, Open an Internet Explorer browser page on your wired computer(desktop) connected to the WRt110 Router...In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    On the main Setup page change the Router's IP Address/IP Address to 192.168.0.2(this address should be unique) and Disable the DHCP Server and click Save Settings, wait for 1 minute, unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...
    Connect the WRT110 Router from Ethernet Port 1 to the 8 Port Router on it's Ethernet Port or LAN Port...
    Now computer's connecting to the WRT110 Router will get the IP Address from the 8 Port Router in the Range of 192.168.0.x...

  • Can Linksys router communicate/hookup with another router???

    I am trying to set up a network for another computer.  Question is, can I set up a d-link router (stand alone, no hookup to internet, use as a reciever for a notebook,  connected to router with ethernet cable) connected with a ethernet cable?  The notebook is not wireless and card cannot be used,  that is why I need to use ethernet cable. 
    Hope this is not too confusing, but I want to hook up a notebook computer using a d-link router with ethernet cable, instead of a wireless card or internal wireless receiver in the notebook, ...........the internet comes in on a linksys wireless router and I want it to go wireless to the d-link router connected to the notebook with ethernet.
    Can this be done???
    Thanks in advance.

    I'm kind of in the same boat. I was thinking that between the two routers, you would connect the two with an ethernet crossover cable vs. a normal ethernet cable. I just need verification that this could work. It's the same idea when connecting switches/hubs together. But, verification would be nice.
    Ixnaydude

  • Cisco UC540 share LAN with another Router

    Hi Guys,
    Quick question....
    Can a UC540 be used as generic device and not as a gateway on a LAN ?
    I ask because we already have site to site hardware VPN with cisco RV series routers between 6 buildings and we dont wan to change it.
    My idea was to have the following setup :
    SITE A:
    192.168.1.1      LAN     Router RC220 ---> Connetced to WAN
    192.168.1.2      LAN    UC540 with nothing connected on WAN port and static route to 192.168.1.1
    Is this a viable option/cheat ?
    Like i said we do not want to change the RV routers/config for site to site and the fact that they are the default gateway....   and in this case i only have 1 public IP to perform the setup.
    thx!

    Lol... yeah it does feel unorthodox .
    The reason is that we already have all the "networking/site to site vpn" setup between all our buildings 6 of them (all cable with 1 static IP).
    Now one of the managers decided to buy a IP phone system to test it. It's a UC540 with 4 lines FXS/FXO.
    We already have it setup the way i mentionned above... i didnt want to make it my primary gateway yet as we want to test it. 
    First my reseller wanted to plug the WAN port of the UC540 to my actual LAN but that felt even more unorthodox.....
    Any way the unit is up, at IP 192.168.1.2/24 and has a static route of 0.0.0.0 0.0.0.0 to 192.168.1.1
    Seems to work....  but for some reason i cant get it to do email notification for voicemail.    config seems legit, can ping to the internet OK.  Option are enable... 24hours.... email is valid....  Even tried notification to my CELL and it doesnt work either....
    The only thing is that i'm trying to use my ISP's SMTP server.... could this be the issue ??
    and for the "advanced features on the UC540 outside interace" can i just use port forwarding on my WAN router to 192.168.1.2  or is there a technical limitation on the UC540 tha prevents that?
    lol... so many questions... if the UC540 proves easy enough/reliable/versatile it might one day replace the RV220 that we currently use.
    Thx for your time and sorry for the typos... tired like Hell
    one last question :  My reseller told me not to do config on this device (UC540) via CLI as it might void the support we can get from cisco... ever heard about this ???   
    I love CLI and used to work only with that on my old ASA/3500 Catalysts/1800 etc........
    thx!

  • Installing a WRT160N with another router

    Hello, I just bought a Linksys WRT160N Broadband Router. I have to connect it to my DSL-Router (192.168.1.1). I followed the setup instructions choosing option "I want to keep my other router". At the end I get the error "Internal Error 302". And no Internet on the PC connected to the WRT160N. Does the setup give a default IP address to the router when 192.168.1.1 is already in use? If yes which address? If I could access to the Web Linksys tool I may find a way to make it work... Help anyone? Many thanks in advance. Yves

    Disconnect the DSL router from Linkssy router ....
    Change the LAN Ip of the linksys router to 192.168.2.1 ...power it down ...then connect the DSL router ...
    See if it works ..

  • Configuring EA2700 as second-level router

    I need to front-end my ISP's router with another, giving me a DMZ.  I have bought an EA2700 for this but I can't find how to configure it.  Can someone help?
    I plan to have the DMZ network as 10.1.2.0/24, with the ISP's router at 10.1.2.254 and the EA2700's "upstream" connection as 10.1.2.1.  The internal network (where most of the clients reside) will then be 10.1.1.0/24, with the EA2700 itself at 10.1.1.254 and a DHCP range 10.1.1.100 upwards.
    On the basic setup screen I've set the Internet connection type to fixed IP, 10.1.2.1; I've set its default gateway and DNS1 as the ISP's router at 10.1.2.254.  Then further down in network setup I've entered the *internal* address 10.1.1.254 and set the DHCP range and netmask appropriately.  I'm getting the error message "The IPv4 address and gateway are not in the same subnet mask".  But the only gateway I've entered is the one by which the *EA2700* knows how to route upstream traffic, viz the ISP's router at 10.1.2.254.  Or am I misunderstanding?
    More fundamentally, can the EA2700 be configured in this way?

    Thank you for the prompt reply.
    The configuration I'm trying to achieve is this (I've left out lots of the downstream connections):
    And my latest attempt at the configuration screen is this:
    I haven't done anything with the firmware on the EA2700 -- it's whatever it was built with.  PS I'm using Linux so have no access to the Cisco Connect utility.

  • Should airport express be configured with the same network as my existing router

    Should airport express be configured with the same network name as my Verizon router.

    Carolyn1962 wrote:
    I am new to apple,used to windows.Apple store advised airport express in order to boost my DSL router.In order for it to be most effective should it be under the same settings.Still learning
    A router signal can not be boosted as all routers put out the maximum allowed by law.  However, proper placement of a secondary router will enable it to "repeat" or extend the signal.
    An Airport can "extend" the WiFi created by another Airport.  It can not extend a non-Apple WiFi.  You need TWO Airport units, one to function as the main radio and the other to function as an extender.  I used two Express units.
    Configuration is simple if you start from a factory default condition.  Connect the main Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Then connect the extender to AC power.  As before, open Airport Utility on your Mac or other computer and accept all of the recommendations.  No need to add password info.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • Please help with SIP configuration on 2801 router

    Hi All.
    Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
    The information from our SIP provider:
    We have issued the following DDI range: 018877000 – 99
    There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
    Configuration details are as follows:
    Our Primary Proxy:-        99.234.56.78
    Codec supported:-             G711Alaw, G729 (G711Alaw is the preferred codec)
    Fax Support:-                     T38 and G711Alaw
    DTMF:-                                 RFC2833 and INFO
    CLI Method:-                     Remote-Party-ID
    Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
    This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
    translation-rule 10
    Rule 0 ^90 0
    Rule 1 ^91 1
    Rule 2 ^92 2
    Rule 3 ^93 3
    Rule 4 ^94 4
    Rule 5 ^95 5
    Rule 6 ^96 6
    Rule 7 ^97 7
    Rule 8 ^98 8
    Rule 9 ^99 9
    interface FastEthernet0/0.1
    description ***DATA VLAN***
    encapsulation dot1Q 1 native
    ip address 10.1.1.101 255.255.255.0
    interface FastEthernet0/0.2
    description ***VOICE VLAN***
    encapsulation dot1Q 2
    ip address 192.168.22.1 255.255.255.0
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    h323
      call start slow
    sip
      bind control source-interface FastEthernet0/0.2
      bind media source-interface FastEthernet0/0.2
      registrar server expires max 36000 min 600
    voice class codec 1
    codec preference 1 g729r8
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    dial-peer voice 1 pots
    description ### External Dialling via BRI ###
    preference 7
    destination-pattern 9T
    translate-outgoing called 10
    direct-inward-dial
    port 0/0/0
    forward-digits all
    dial-peer voice 2 pots
    description ### External Dialling via BRI ###
    preference 2
    destination-pattern 9T
    translate-outgoing called 10
    direct-inward-dial
    port 0/0/1
    forward-digits all
    dial-peer voice 9000 voip
    description ** Outgoing calls to SIP **
    preference 1
    destination-pattern 9T
    voice-class sip dtmf-relay force rtp-nte
    session protocol sipv2
    session target ipv4:99.234.56.78:5060
    dtmf-relay rtp-nte
    codec g711alaw
    no vad
    sip-ua
    timers connect 100
    sip-server ipv4:99.234.56.78
    I used debugging commands to troubleshoot the calls.
    2801(config-dial-peer)#
    094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
    094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
    094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9
    094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
    094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90
    094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
    094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=908
    094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
    094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9086
    094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
    094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862
    094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
    094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=908621
    094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
    094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9086215
    094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
    094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157
    094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
    094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=908621577
    094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
    094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=9086215777
    094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Partial Matches(1) after DP_MATCH_DEST
    094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=MORE_DIGITS_NEEDED(1)
    094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
    094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774T
    094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
    094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
    094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
    Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
    From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
    To: <sip:[email protected]>
    Date: Tue, 24 Jan 2012 09:27:10 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327397230
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 244
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
    s=SIP Call
    c=IN IP4 192.168.22.1
    t=0 0
    m=audio 18258 RTP/AVP 8 101
    c=IN IP4 192.168.22.1
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
    Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
    From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
    To: <sip:[email protected]>
    Date: Tue, 24 Jan 2012 09:27:11 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327397231
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 244
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
    s=SIP Call
    c=IN IP4 192.168.22.1
    t=0 0
    m=audio 18258 RTP/AVP 8 101
    c=IN IP4 192.168.22.1
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
    Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
    From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
    To: <sip:[email protected]>
    Date: Tue, 24 Jan 2012 09:27:12 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327397232
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 244
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
    s=SIP Call
    c=IN IP4 192.168.22.1
    t=0 0
    m=audio 18258 RTP/AVP 8 101
    c=IN IP4 192.168.22.1
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
    Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
    From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
    To: <sip:[email protected]>
    Date: Tue, 24 Jan 2012 09:27:14 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327397234
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 244
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
    s=SIP Call
    c=IN IP4 192.168.22.1
    t=0 0
    m=audio 18258 RTP/AVP 8 101
    c=IN IP4 192.168.22.1
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    I made some changes in the router configuration.
    I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
    The debugging is changed now. I can send and receive a respond from SIP server. But  It shows an error: SIP/2.0 404 Not Found
    Then it moves to ISDN line, and use this line to make a call.
    102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
    102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774T
    102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
    102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
    103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
    Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
    From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
    To: <sip:[email protected]>
    Date: Tue, 24 Jan 2012 14:45:47 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327416347
    Contact: <sip:[email protected]:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 247
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
    s=SIP Call
    c=IN IP4 10.1.1.101
    t=0 0
    m=audio 19412 RTP/AVP 8 101
    c=IN IP4 10.1.1.101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Received:
    SIP/2.0 404 Not Found
    From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
    To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
    Content-Length: 0
    103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    ACK sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
    From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
    To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
    Date: Tue, 24 Jan 2012 14:45:47 GMT
    Call-ID: [email protected]
    Max-Forwards: 70
    CSeq: 101 ACK
    Allow-Events: telephone-event
    Content-Length: 0
    103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
    103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
    103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=211
    103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=20018
    103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=0862157774
    103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
    103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
       Result=NO_MATCH(-1)
    103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
    2801(config-dial-peer)#
    Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
    But it didn’t affect anything.
    Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
    Really stuck and don't know where to look at.
    Any help will be highly appreciated.
    Thanks.

    Hi Dan.
    Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
    I use Cisco ASDM for ASA to make changes.
    There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44)  for a few ports.
    Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
    For NAT:
    I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
    (AS TRANSLATED) UDP 5060
    Because there is already translation for the Server.
    Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
    116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
       Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
       Peer Info Type=DIALPEER_INFO_SPEECH
    116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
       Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
    116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
    116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=90862157774
    116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=9000
         2: Dial-peer Tag=2
         3: Dial-peer Tag=1
    116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
    116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
    Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
    From: "Sam " ;tag=D4410748-1C9D
    To:
    Date: Wed, 25 Jan 2012 15:28:25 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 219068878-1184895457-2533916991-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327505305
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 247
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
    s=SIP Call
    c=IN IP4 10.1.1.101
    t=0 0
    m=audio 18782 RTP/AVP 8 101
    c=IN IP4 10.1.1.101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
    Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
    From: "Sam " ;tag=D4410748-1C9D
    To:
    Date: Wed, 25 Jan 2012 15:28:26 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 219068878-1184895457-2533916991-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327505306
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 247
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
    s=SIP Call
    c=IN IP4 10.1.1.101
    t=0 0
    m=audio 18782 RTP/AVP 8 101
    c=IN IP4 10.1.1.101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
    Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
    From: "Sam " ;tag=D4410748-1C9D
    To:
    Date: Wed, 25 Jan 2012 15:28:27 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 219068878-1184895457-2533916991-1958389771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327505307
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 247
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
    s=SIP Call
    c=IN IP4 10.1.1.101
    t=0 0
    m=audio 18782 RTP/AVP 8 101
    c=IN IP4 10.1.1.101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
    Sent:
    INVITE sip:[email protected]:5060 SIP/2.0
    Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
    Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
    From: "Sam " ;tag=D4410748-1C9D
    To:
    Date: Wed, 25 Jan 2012 15:28:57 GMT
    Call-ID: [email protected]
    Supported: 100rel,timer,resource-priority,replaces
    Min-SE:  1800
    Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1327505337
    Contact:
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 247
    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
    s=SIP Call
    c=IN IP4 10.1.1.101
    t=0 0
    m=audio 18782 RTP/AVP 8 101
    c=IN IP4 10.1.1.101
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20
    I'll add Incoming dial-peer now.
    Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
    Appretiate your help.
    Thanks a mill.

  • I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network.  Does anyone know where to find this?  It's a password that I set myself, not the one that came with my router.

    It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
    Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
    Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
    The network password will appear in the box.
    Quit Keychain Access.

  • HT5569 Yesterday, my ability to receive gmail, facebook, safari,etc.ceased on my ipad2. The wifi shows it is connected and the cisco router works ok with another computer connection.  Can anyone tell me what I need to do with ipad in order to get it worki

    Yesterday, my ability to receive gmail,facebook,safari,etc. ceased to perform  The wifi connections shows that  it is connected but I cannot get through the internet .  I use a Cisco router and it is working fine with another computer and also a printer. I contacted the internet provider and they show the ipad at the router but not out through the internet. Also, yesterday my wife eliminated some programs(games,etc) from the ipad.  Anway, I am thinking I am missing some setting that is not turned on as everything seems to be working fine.
    Any suggestions?

    Settings > General > Reset > Reset Network Settings

Maybe you are looking for