Each target assigned to a job must have a setting and destination.

Simple. Basic Question.
Trying to use Compressor to change the codec on my flip cam to make it more compatible with FCP X.
I have dragged a source and destination into the batch. But it keeps giving me the error "Each target assigned to a job must have a setting and destination." I saw others had this same issue and the solution I saw was to set a destination for the video AND audio. How do you assign for BOTH? I thought it was just a drag and drop method into batch ...

You didn't say what your settings were. But tif it's not one of the DVD presets, you shouldn't ordinarily be faced with separate audio and video streams with the majority of presets. Here's an example of a batch with one source file, multiple targets and multiple destinations. Only the DVD Preset has separate audio and video…and those do require that destinations be specified. If the destination is not specified, it defaults to Source.
Good luck.
Russ

Similar Messages

Association must have both source and destination ends.

I am getting this error when trying to developer Oracle Applications framework page using ICX and FND information. I am trying to find out if there is something missing. I don't see an assocation that is missing a source or destination.

{forum:id=210}

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2

I'm an American living on a timed (though long-term) assignment in Ireland. I have both American and Irish bank accounts and addresses. I have two Qs. 1. Can I use the US Adobe site when in Ireland? Or will my physical location prevent me from doing so? 2. I am working for a not-for-profit organization. Is there a special pricing plan for non-profits, similar to the plans for students, small business, etc? Thanks for whatever help you can give me. (P.S. As a potential customer and past user of Adobe products for 15 years, I find it INCREDIBLY FRUSTRATING that I cannot speak with any Adobe representative, but am continually re-routed instead to a public forum to get what I hope will be accurate information. Not good, Adobe. Your products are amazing. Your customer service leaves a lot to be desired. I don't mean that with disrespect, but as honest feedback.)

Hi bookchic
Thanks for your feedback.
Non-profit pricing is available to eligible institutions via the VIP program which is sold by resellers - see Eligibility guide
For details of resellers please check here: Adobe Platinum Partners – Value Incentive Plan
If you wish to purchase an individual plan via Adobe.com the country of your Adobe ID will determine which site you order from.
Kind regards
Bev

Query SQL code gets deleted after export to Excel. "Query must have at least one destination field"

Hi all,
I'm getting really frustrated by this Access error. It happens when I export the result of a query through an Access macro to Excel, the first time it runs well but the next time, there is a chance that the query won't run and the error "Query
must have at least one destination field" will be displayed. After that, I try to check the query SQL code and discover the code has vanished. I'm using simple Select query without joins, only "where", "group by" and "order by"
statements.
Thank you in advance for your help,
Jesus
Edit:
One of these queries are like the following (all of them are of this type):
SELECT Field1, field2, field3, field4, field5, Sum(Field6) AS SumOfField6, Sum(Field7) AS SumOfField7
FROM Table1
WHERE Field6 is not null
GROUP BY Field1, field2, field3, field4, field5
Order By Sum(Field6) desc

Hi Peter,
Thank you for your response, I updated the original question with one of the codes.
Thanks,
Jesus

All listing element must have index,name and value?

when i trying to convert a fmb file to xml, it shows a warning.
All listing element must have index,name and value...
how to resolve this..
Edited by: skud on Mar 9, 2011 6:03 AM

when i trying to convert a fmb file to xml, it shows a warning.
All listing element must have index,name and value...
how to resolve this..
Edited by: skud on Mar 9, 2011 6:03 AM

I must have a setting wrong on PSE 10. When I use selection tool and select color, it is always blue. What am I doing wrong?

I must have a setting wrong on PSE 10. When I want to fill a selection with color, I choose the color but it always comes up blue. What am I doing wrong?

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

Gettin "Assertion Failed" message and "Assert: parent node must have _DOMElement set", first when trying to bookmark and then when the "auto fill" on some web sites is used. Started after 3.6.9 automatic upgrade.

Open Firefox and navigate to web site. Try to save to bookmarks and get the "assertion Failed" message and "Assert: parent node must have _DOMElement set" followed by a list of 8 (0-8) items.

Try the Tiny Menu extension. I am using an older version of Tiny Menu on Lucid with Firefox 3.6.x and it works fine.

Object name must have between 000003 and 000009 characters

Hi BW Experts,
When I am trying to create a cube I am getting the below error message:
Object name Z0FIGL_01 must have between 000003 and 000009 characters. Message no. R7112
It would be great if some one can help me to resolve the issue...
Regards,
Reddy

Hi
The infocube technical name must be in between 3 to 9 characteristics length
i.e,Min 3 Char & Max 9 Char
is ZOFIGL_01 is ur object name ?its defined within limits,need to verify:)
hope this helps
Sriman
Edited by: Sreeman on Apr 11, 2008 9:34 PM

I bought a movie on my iphone and was trying to update and accidently must have hit restore and never stored the purchased movie on ITUNES. I purchased the movie from ITUNES? How do I retrieve the movie?

I purchased a movie on my Iphone. I was syncing my Iphone and must have hit restore and lost the movie. How do I retrieve it? It is not stored in Itunes?

Hi
go to itunes on your iPhone then they will be a downloads button at the bottom press it and it will have everything you every downloaded from itunes then just download it again

When I physically rotate my IPOD touch the screen does not rotate. I must have something set wrong

When I physically rotate my Ipod touch the screen does not rotate. I must have something set wrong, but can't find out what it is. Can someone point me in the right direction?...thanks

Is orientation lock on?
iPod touch User Guide (For iOS 5.0 Software)

TS3899 Hi when I download emails on my desk top at home my emails from my new plusnet account disappear from my ipad, I think I must have a setting wrong can anyone advise what I need to change? Thanks Mark

Hi when I download email on my desktop at home my emails from new ISP disappear from my ipad, I must gave a setting wrong can anyone help me correct it ?

Hi Allan ,
Thank you for the reply,
I have just checked that my PC at home is a Pop3 account , and I used the same setting on my ipad and iphone.
Sorry , not being that enlightened on computers , what do I have to do ?
I'm not understanding
Thank you

What else can I try to change my screen view back to normal a button must have been hit and it went to super huge view? I have tried resolutions resets already

last night a button must have gotten hit on my desk top. The whole screen view went super huge and I have tried all the resolution changes and the system prefrences I have no clue what else to try after 3 hours failed.

Okay, I'll have one last go. I am now looking at the post you have just sent me. As you (a) started the post and (b) have not awarded stars to anyone yet, directly one line above the grey 'Like' and 'Reply' words should be a green star and a yellow star. That is because you have yet to award them. Once you do, the chosen one will disappear and reappear against the post you selected.
Now were you to consider this post worth a yellow help mark and you clicked the yellow star, you would see that happen. Then if it works, you can go to any of Paul's posts and click the green one there.
We are not allowed to ask for stars so if you do that it would be your decision but I can see no other way to explain or demonstrate.
Otherwise I can't help more and simply be at a loss to understand what has happened.

Itunes fails to recognize my phone and wants me to load as 'new phone' each time I hook up. I have disabled firewalls and it will recognize one out of five times. It also attempts to sync but just runs forever, then gives error message 0xE8004006

Itunes does not recognize Iphone. It asks me to restore or add as new phone each time I sign on. It then attempts to sync, just runs forever. After five tries, it allowed me to upgrade OS, but still refused to complete a sync. I have disabled firewalls. Error message 0xE8004006
Thanks

https://discussions.apple.com/thread/2482232?start=0&tstart=0

I've installed icloud on my ipad but when I tried to install it on my MacBook re mobileme, must have blocked it and now get a message saying I need to enter another name

How can I uninstal my mobileme account and install my icloud address? Mobile me doesn't recognise my Apple ID....won't allow me to open icloud on my MacBook. keep getting a message saying I need to enter another name or pin......nothing works........I've probably blocked it as server keeps saying try later.......

The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

My child must have deleted safari and the app store from my iPad 1. How do I restore them?

Safari and app store icons missing, child may have deleted them? How do I recover them?

You can't delete the preinstalled apps. Go to your Home screen and then swipe to the right to reveal the search screen Type in the app name and do a search.
Also, these apps may have been "Turned Off" by Restrictions. Go to Settings>General>Restrictions.
 Cheers, Tom

Each target assigned to a job must have a setting and destination.

Similar Messages

Maybe you are looking for