EAP-AUTH-AAA-ERROR: Reply received on stale handle

Hi,
I try to deploy 802.1x EAP-TLS in Lab enviroment with ACS 4.2 and
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(46)SE
If I use the PEAP, it is working, but if EAP-TLS, then nothing show in logs on ACS, but error message.
EAP-AUTH-AAA-ERROR: Reply received on stale handle (0x00000000)
If I switch Network Access Profile to another one w/o EAP-TLS then in log I get
12/10/2009 10:23:21 Authen failed [email protected] Default Group XX-XX-XX-XX-XX-XX, other, EAP type not configured
What could be a problem?

Problem was solved by migration of whole ACS to another server with 4.2.0.124 Patch 12.

Similar Messages

  • Received a stale replication request for object -5501512184535778178

    Hi all,
    any idea what causes these error ?
    <Received a stale replication request for object -5501512184535778178.>
    also i sometimes get the following warning ?
    <Warning> <HTTP Session> <BEA-100089> <The session id: B1JDMbfWyJyDXnQvn3TRN2njnLRTb921DpsX24JhhrLbkyQRNQ7J has been accessed from -5501512184535778192S:10.100.253.118:10.100.253.118,10.100.253.116:domain:MSServer, a server that is neither the primary (3612741392895506637S:10.100.253.116:[7003,7003,-1,-1,-1,-1,-1]:10.100.253.118,10.100.253.116:domain:MSServer-2) nor the secondary (NONE)
    please advice

    Hi all,
    any idea what causes these error ?
    <Received a stale replication request for object -5501512184535778178.>
    also i sometimes get the following warning ?
    <Warning> <HTTP Session> <BEA-100089> <The session id: B1JDMbfWyJyDXnQvn3TRN2njnLRTb921DpsX24JhhrLbkyQRNQ7J has been accessed from -5501512184535778192S:10.100.253.118:10.100.253.118,10.100.253.116:domain:MSServer, a server that is neither the primary (3612741392895506637S:10.100.253.116:[7003,7003,-1,-1,-1,-1,-1]:10.100.253.118,10.100.253.116:domain:MSServer-2) nor the secondary (NONE)
    please advice

  • System Error: No receiver  could be determined

    Hi,
    When i logged into the portal and click on Time management link which takes you to the time entry application (HRESS_C_CATS),and  the below mentioned message is displayed. "System Error: No receiver  could  be determined ".
    Could you pls let me know why this  error shown.? This error appeared when a functional guy changed the employee profile.
    Any idea how to solve this error?
    Thanks,
    Lakshmi.
    Edited by: Lakshmi Atukury on Feb 13, 2012 7:30 AM

    Check siddarth reply in below thread
    http://forums.sdn.sap.com/thread.jspa?threadID=2135503
    Regards
    Srinivas

  • Idoc ORDERS returned by PI with message "External Error Header Received"

    Hello,
    I would appreciate if somebody can help on this :
    I'm sending idocs ORDERS05 from R/3 4.6C to PI 7.01.
    Idocs are generated and sent successfully from R/3 but are not generated in PI.
    From R/3, Idocs are visibible in T BD87 and are classified under "Idocs in target system" with :
    - status 56 : "External Error Header Received"
    - idocs have a number in R/3 but no partner idoc number
    - Partner number is the purchase order vendor number
    Thanks a lot for your help.
    CCH

    Hello,
    Thanks a lot for those helpful replies.
    Looking in the sxmb_moni, xml messages is blocked and error message is "Error while reading ID of own business system from
    the SLD for system SND and client 320"
    -I have ckecked the SLD and technical system SND-320 is well linked to business system SND-320.
    -I have ckecked SM59 and tested the html link between XI and SNC but reply is "empty reply". Am I supposed to have a positive check at this point ?
    -I have checked my distant user in SAP SNC and change its role to SAP_XI_IS_SERV_USER_MAIN
    Concerning we20 in XI, I can't declare an the HTTP connection SND-320, not recognized as a Logicial System
    At this point, Idocs are reaching XI from R/3 but don't reach SNC.
    Regards,
    Cédric

  • When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

    We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
    This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
    We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
    A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
    An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

    This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
    oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
    Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
    javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
    This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
    Jani Rautiainen
    Fusion Applications Developer Relations
    https://blogs.oracle.com/fadevrel/

  • Software Update Deployment - Job error (0x80072f0c) received for assignment

    I'm deploying a software update to my test clients but half of them failed with error below;
    UpdateStore.log -
    Failed to refresh sync message. Error = 0x87d00310. 
    WUAHandler.log
    OnSearchComplete - Failed to end search job. Error = 0x80072f0c. 
    Scan failed with error = 0x80072f0c. 
    Updates Deployment
    Job error (0x80072f0c) received for assignment ({0F2CA22F-BB7A-4ED8-9794-15AB24B83E09}) action
    Do you have any recommendation ?

    Since no one has replied to this post, I recommend that you contact Microsoft Support (CSS) directly, they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Can not re-install Maverick operation could not be completed OSInstall Recovery Auth Session error 6

    Trying to re-install Maverick on my wifes Mac Book Pro Retina 13inch (Nov 2013).  when installer verifies eligibility getting
    operation could not be completed OSInstall Recovery Auth Session error 6
    Any thoughts?  The computer was bought last Nov when we were in US, now we are in Thailand.... could it make a difference?  At the same time, it seem to me that Apple had som issues with they web sites today (at least from my point of view). Is something bad happening? Maybe hacker attack?
    Your thoughts/suggestions will be highly appreciated.
    Cheers,
      Andrei

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • Error 1017 received logging on to the standby

    Hi anyone,
    Please help me...
    i have database running on Oracle 10gR1 EE (10.1.0.4.0) on Linux Red Hat. and this server is replicate to DR server for backup. we change 'SYS' password about a week ago and nothing occur until today, the database is not connecting to DR server. here is the error obtain from the alert_log file. is there i 've missed anything when changing SYS password?
    somebody please help me.. im in horror now.
    thanks in advance.
    -Nonie

    forgot to paste the error.
    Mon Jan 21 14:54:20 2008
    Error 1017 received logging on to the standby
    Check that the primary and standby are using a password file
    and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
    and that the SYS password is same in the password files.
    returning error ORA-16191
    It may be necessary to define the DB_ALLOWED_LOGON_VERSION
    initialization parameter to the value "10". Check the
    manual for information on this initialization parameter.
    -Nonie

  • Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.

    I've done it 6 times the steps you mention to get this thing to work but still it doesn't work for me. I've downloaded iTunes, installed it, and again the same message it's going on Error message received -  Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Verify that you have sufficient privileges to start  system services.
    I've deleted iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour, restart my computer and downloaded again (6 times) and still doesn't work for me. What should I do?

    I deleted all Apple products you mentioned above (iTunes, Apple Mobile Device Support, Apple Software Update and Bonjour), deleted the prior downloads I had previously tried to install and then emptied my recycle bin.  Then I started with a new download of iTunes before the problem was solved for me.
    It really ***** that Apple does not give any direct support for its own products.
    Good Luck

  • Error in Receiver Communication Channel in FCC

    I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records.  So my XSD looks like this :
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
       <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
       <xsd:complexType name="DT_RecordIB">
          <xsd:sequence>
             <xsd:element name="Records" type="xsd:string" />
          </xsd:sequence>
       </xsd:complexType>
    </xsd:schema>
    I have used FCC and the parameters are :
    Recordset Structure                                  Records
    Records.fieldSeparator             'nl'
    But I am getting following error in Receiver Communication Channel :
    Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
    Thanks,
    Pankaj Singh

    Hey Pankaj,
    Your content conversion parameter might be configured improperly.
    Refer this blogs
    /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Refer the following threads for your problem
    [ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
    Rgds
    Ramesh

  • I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer.   This is the error I receive:Please wait...    If this message is not eventually replaced by the proper contents of the do

    I cannot open a PDF in either Chrome or Firefox. I have uninstalled and reinstalled Adobe Reader XI.0.09 and restarted my computer.   This is the error I receive:   Please wait...    If this message is not eventually replaced by the proper contents of the document, your PDF  viewer may not be able to display this type of document.    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by  visiting http://www.adobe.com/go/reader_download.    For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader.    Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark  of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other  countries.

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

  • Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

    Hi experts,
    I have a big issue in production server,
    the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
    if i am reprocess or press F6 it is going manually.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31">  </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">&copy; 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Regards,
    Kiran polani

    Dear Sriram Ramani,
    in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
    but my problem is in Soap to RFC case..
    for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
    when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
    not for all signals for few signals for some time..
    Why it is happening i can't understand.
    in repository it is saying Repsitory object hmi failed and address already in use.
    is there any problem with loading IR objects.
    Please suggest me good suggestion for this type of issue what can do for this to resolve.
    Regards,
    Kiran Polani

  • I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12  file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser.  Unknown Error. (123)"

    Change browsers. See what happens.
    Be well...

  • Error at Receiver File Adapter

    Hi All,
    Mine is FILE (txt) to FILE (txt) scenario with content conversion.
    No problem from SENDER FILE adapter.
    No problem in XI pipeline processing.
    Error  at receiver adapter:
    The eror is:.. 1.fieldSeparator is missing or 1.fieldFixedLengths is missing...
    Though, I have checked at Receiver Adapter configuration that
    *.fieldSeparator is properly filled.
    There are no optional fields as such in the input file.
    Thanks,
    Shaily

    Hi,
    Check the links on FCC and compare what u have gave is correct or not.
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Regards,
    Phani
    Reward points if Helpful

  • File Conversion error in Receiver File Adapter

    Hi ,
    I am facing the below error in  receiver file adapter .
    Conversion initialization failed: java.lang.Exception: java.lang.NumberFormatException: For input string: "4|8|10|2|10|4|10|4|40|40|40|1|20|2|20|8|40|0|12|12|12|1|12|4|4|8|40|8|8|8|8|12|40|8|10|10|10|10|10|1|10"
    Kindly suggest !
    Regards,
    Hemanthika

    Hi,
    Check it - File adapter is active ? try to Re-activate the same.
    Also do CPACache Refresh.
    Still problem, tyr out by restarting the Adapter Engine.
      I guess you're just trying to send all the data in your file record to a <data> element as a whole. If so, this blog will help you:
    Configuring Generic Sender File CC Adapter
    Under certain operating system platforms, such as Solaris, the APIs used by the Java Runtime (JRE) are not Unicode-aware. Consequently, the JRE needs to be configured to correctly interpret the character set it receives from the operating system.
    This is configured through the "file.encoding" system property as well as the "LANG" environment variable.
    Make sure you set "file.encoding" to a character set (such as ISO-8859-1) that supports the special characters you would like to process. This system property can be configured by appending "-Dfile.encoding=<encoding>" to the Java VM parameters section of the SAP J2EE Config Tool.
    Additionally, you need to set the "LANG" environment variable to a locale that supports more than 7 bits, such as "de.ISO8859-1". The encoding you specify in the LANG environment variable needs to match the encoding set via "file.encoding".
    You can persistently configure the environment variable by setting it in the profile $HOME/.sapenv_$HOSTNAME.csh of the <sid>adm user: setenv LANG de.ISO8859-1
    Refer this article
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
    See below link
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
    Please refer this thread .
    File Adapter Not Initialized Error
    Cheers,
    Regards,
    Suryanarayana

Maybe you are looking for