EAP-PEAP & EAP-MSCHAPv2 freezes phone

I am having trouble connecting to my schools WPA network.
They have put up a guide that looks like this:
http://www.lan.kth.se/kthopen/wpa/phones/S60.html
I have also tried this:
/discussions/board/message?board.id=connectivity&thread.id=12900
However, everytime I try to connect through the access point my freezes at "Connecting via [name of network]". I can't press cancel, however, the power button still works and the screen saver starts.
I appreciate any help, thanks!
EDIT: I use a Nokia e51
Message Edited by heinrisch on 25-Aug-2008 12:41 PM

Similar Messages

Nokia E51 with 802.1x / EAP-PEAP & EAP-MSCHAPv2 pr...

Hello,
I'm trying to connect my phone to a Wireless AP (Cisco AP1130) using 802.1x, EPA-PEAP & EAP-MSCHAPv2 authentication.
The RADIUS SERVER is M$ IAS.
Authentication is working with a laptop, but it is not with my phone
The only difference during the authentication process on the AP is that during Phase 1 my laptop is sending REALM\Username while my phone is sending Username@REALM.
Does somebody know what should I change in my phone's configuration to make it work ?
Thanks,
Ceux qui aiment marcher en rangs sur une musique :
ce ne peut être que par erreur qu'ils ont reçu un cerveau,
une moelle épinière leur suffirait amplement. -- Albert Einstein

Hi,
Sorry for the late answer since I was "out of the office" for a while
So here is the process to get the certificate.
Log in to you IAS Server.
Open the IAS Service Application.
Go to "Remote Access Policies".
Choose the policy that apply to "Wireless Connection"
Click "Edit Profile" button.
Choose "Authentication" Tab.
Click "EAP Methods"
Choose "Protected EAP (PEAP)" Entry & click "Edit" Button.
The Next Window will show you the Certificate Issuer Name & Expiration Date.
Then, click "Start" Button.
Choose "Run".
Type "mmc" in the "Run" box.
Click "File" & Choose "Add/Remove Snap-In".
Click "Add" Button.
Choose "Certificates" entry, click "Add" Button & Choose "My User Account" in the "Certificates Snap-In" Window & click Finnish.
Click "Close" & "OK" Button.
Expand the "Certificates - Current User" Entry" & "Intermediate Certification Authorities" & Select "Certificate".
The left window will show you a list of certificate. One of them should have the same name as the one in the "Certificate Issuer" Entry of the IAS Service Application.
"Right click" on the certificate, choose "All Tasks", the "Export".
In the new window, click "Next" Button.
Choose "DER Encoded Binary X.509 (.cer) entry & click "Next" Button.
Choose a suitable location.
Click "Next" Button & "Finnish" Button.
Certificate is now exported.
You have to install it on your Phone now.
The most simple way is to copy the certicate on a Web Server and access it with your phone.
Hope that Help, if you did not already succeed.
Ceux qui aiment marcher en rangs sur une musique :
ce ne peut être que par erreur qu'ils ont reçu un cerveau,
une moelle épinière leur suffirait amplement. -- Albert Einstein

802.1x Profile - PEAP/EAP-MSCHAPv2

I'm trying to connect my new retina Macbook Pro to our enterprise network, and am having trouble with the 802.1x profile. Looking at the settings on my Windows PC, I need to use PEAP/EAP-MSCHAPv2, but OSX Lion seems to default to PEAP/EAP-GTC. With these settings, I'm able to connect to the network but cannot access any network resources.
I'm using the iPhone Configuration Utility to generate the 802.1x profile package. As far as I can tell, I am unable to change the inner authentication method with this application. Anyone out there have any suggestions on how I can resolve this?

The prompt is specified when you create the profile on the machine. You can either have the user get prompt for login, save a username and password or use the cache credentials. You need to look at the errors in radius and in the wlc. One will have enough info to say what went wrong during the authentication process.

ACS 5.5 MAB Notebook do Host-Lookup then also send PEAP (EAP-MSCHAPv2) requests

Hello Community,
i have a problem, one Notebook in our enviroment authenticates successfully with Host-Lookup (MAC-Adress) and get the right VLAN but then also sends permanantly PEAP (EAP-MSCHAPv2) requests with a diffrent Username ( Username is not an MAC-Adress) It is the Computername of Windows.
What is the Problem here ?
Thanks

Hello Sebastian. A few questions:
- How is the supplicant configured on the Windows machines?
- Is 802.1x enabled on the supplicant?
- If possible please attach screenshots of the supplicant's configuration
- Is this for wireless, wired or both?
- Can you post screenshots of the ACS log page for those events along with a screenshot of the "detailed screen" for one of those events
Thank you for rating helpful posts!

Nokia 500 EAP-MSCHAPv2 support?

So apparently I am trying to connect to a WLAN network (Eduroam) that needs EAP-MSCHAPv2 protocol but apparently I can't see it in EAP protocols list.
So is there really no EAP-MSCHAPv2 support in Nokia 500?
And is EAP-MSCHAPv2 protcol something that can be fixed within a software or is it a hardware issue? Will it be added to Symbian Belle update which every Nokia 500 owner is so desperately waiting for?
It's a pity, since even older models (S60v3) supported EAP-MSCHAPv2 protocol and as far as I know, all other Symbian Anna phones support it.
Solved!
Go to Solution.

Hi there,
I have same phone and same problem you described but I can not connect to wifi even after updating to Nokia Belle. I created an access point WPA EAP. I selected EAP-PEAP. I can not find EAP-mschapv2 so I selected EAP-PEAP and I selected PEAPv0 (I read somewhere that is the same thing).
I set my username and domain but it is still saying authentication failure. With my N900 I was able to connect.
Any idea what I am doing wrong?
Thanks!

802.1x - EAP-MSCHAPv2 / LDAP on ACS 4.2

Is possible to use PEAP EAP-MSCHAPv2 with LDAP ?

No LDAP doesnt support mschapv2, here are the authentication protocols/database matrix:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/eap_pap_phase.html#wp1014889
Thanks,
Tarik

Sample config requested: IOS AP with WPAv2 with PEAPv0 aka EAP-MSCHAPv2

Would someone be kind enough to share a sanitized config with me for the following:
AIR-LAP1131AG-A-K9 LWAP converted to autonomous mode running IOS v12.3(8)JEA
WPAv2 with PEAPv0 aka EAP-MSCHAPv2.
Thanks,
Richard

Hello,
Here's what I would use. The AP is actually unaware of the EAP type:
aaa group server radius rad_eap
server RADIUS_IP auth-port 1812 acct-port 1813
aaa authentication login eap_methods group rad_eap
aaa authorization exec default local
aaa session-id common
dot11 ssid SSID_PRIVATE
VLAN X
authentication open eap eap_methods
authentication key-management wpa
guest-mode
username cisco password 0 cisco
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan x mode ciphers aes-ccm
broadcast-key vlan x change 360
ssid SSID_PRIVATE
interface Dot11Radio0.x
encapsulation dot1Q x
interface FastEthernet0.x
encapsulation dot1Q x
radius-server attribute 32 include-in-access-req format %h
radius-server host RADIUS_IP auth-port 1812 acct-port 1813 key 0 RADIUS_KEY
radius-server timeout 30
radius-server vsa send accounting
Serge

Freezing phone

I have an iPhone 4s.. I my phone started freezing when I picked a phone call then shutdown. Now I didn't update my latest iOS...
Now my phone is restarting repeatedly....
- green screen with lines
-plaid looking screen
-finger print looking screen
-blue screen
-orange screen
-vertical blue, gray, black (vertical lines)

I've already tried that... But my screen is restarting over repeatedly and turning every color you can imagine...
I'm going to try to Restore it again,,,,
wait... now restarting on its own...
I'lll keep you updated.....
Thanks for the reponse

Wireless update freezes phone now stuck please help

my torch has started a wirless update but when getting through back up freezes between 8 an 20 % . Have noticed in forum that this is known but for a computer update you just take out this as a back up option but on a wireless update the phone is stuck if I do a battery pull and put itback after few mins it starts again and tries to update is there anyway to cancel update or solve this. tried pluggin into pc but doesnt do anything different. please help

Hello,
A forced wireless update? I've honestly never seen that...quite unusual...normally, you must initiate the process. Nevertheless, as I'm sure you've seen, OTA updates are NEVER recommended for exactly the situation you are experiencing. The OTA update conducts an on-device backup, which is used to restore after a successful OS update. But, if anything should go wrong, that backup file is lost forever. Hence, updating via PC is recommended since you then have the opportunity to take a manual backup and store that resulting IPD file on your PC.
But, back to your issue...the update being forced is rather strange. If there's no way to prevent it, then perhaps you could try the following:
Turn off all network connections (both mobile carrier data network as well as WiFi) and then do a batt-pull reboot. See if the update continues to be forced...if not, then proceed with a PC/USB based update.
Failing that, try booting into Safe Mode and see if you can then keep the forced update from running:
KB17877 How to start a BlackBerry smartphone in Safe Mode
I've honestly never tried to update the BB OS (from a PC) when the BB is in Safe Mode, but you could give that a try and see if it helps.
Let us know how those attempts work out for you.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Freezing phone and restoring deleted BB Messenger contacts.

I'm using a Blackberry Curve 9300, it seems to freeze a lot lately, sometimes for hours at a time. Like this morning it froze from 12midnight until 5:30am. When it freezes I get a black squared clock at the centre of my screen. I then decided to whip out everything on my phone thinking if I did that everything will be back to normal. After whipping out all my stuff now not only do I still experience the same problem of freezing, I now lost all my BB Messenger contacts that I can't restore. I now don't know what to do. Please help, how do I stop my phone from freezing all the the time and how do I restore all my contacts!

I think you mean "wiping" not "whipping, I understand now.
Did you do a backup of the device to your PC before wiping it?
Do you have BBProtect installed and backing up daily or weekly?
Before wiping, did you do a BBMessenger > Options > Backup Contacts? to either the media card or remote backup?
For the freezing...
Do you have Memory Cleaner enabled (look at Options > Security > Memory Cleaning) and if you do, disable it.
What is your Operating System loaded to your device? Look at Options > About, third line down beginning with a "v.6.0.x.xxx", What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

8120 SD Card Freezes Phone

I have been having a tremendous amount of problems with my 8120 pear freezing. T-Mobile tech support couldn't figure out the problem, and sent a replacement phone, and the new phone had the same problems. I finally figured out it was the SD Card causing the problems. The problems started when I updated my device software to the latest version. I had a 4G card in it for a long time without a hitch, I bought an 8G card, and didn't have any problems either for several weeks until the software upgrade. Now my phone freezes with the 4G or 8G card, I even bought a new 8G card thinking that was the problem. Any way to downgrade to 4.3 software? Any fixes?

mikekell wrote:
My Droid X does the same. It works fine w/o the SD card. I am able to access the SD card using my reader and am in the process of copying all the data off it (10 of 16 gigs used).
Any idea what is the problem if the SD card is readable?
Thanks.
(I will eventually reformat the SD card and reinsert. Will update with results of that after done and then if possible, after readding some data.)
Also, my phone has been crashing a lot lately anyway... particularly when using Google Maps.
Most cases like this there is a corrupt file on the SD card. After you format the SD card and if it tests okay when put back in your phone, add the folders back on one at a time and reboot the phone. When you find it doesn't reboot you know you found the folder with the bad file.

6600 fold - number 6 freezes phone. a bug well kno...

I bought 6600 fold for my wife over 6 weeks ago. The phone is totally useless because of this feature: pressing number 6 too rapidly or at all(which is often the case when typing sms messages and you just need to use that 'n' or 'o'), totally freezes the phone. A reboot is needed to get it going again. I've encountered this bug even when typing the PIN code.
Nokia care centre replaced the device and the same "feature" seems to be issue in this new phone too. And yes, the latest firmware 5.60 was used in these 2 phones. So I rushed to to Nokia care centre again I was told: it's a software bug, will be fixed in release, don't know when.
So I did some research and I found out that this bug has been known for over several months now, and Nokia hasn't done anything about it. I wonder when Nokia bothersto fix this, the phone is absolutely useless now. Money well spent...

Ok, I had some previous posts... That was in January, things happened since then.
Mine is a non-Nokia guarantee phone, it is from Nokia Asia, made to work in Hungary.
After several tries, the service has solved the problem.
The knew about the problem, they said it IS a hardware thing, not a software, so updating won't solve it.
after about 3-4 weeks they gave it back and since then, the phone is working.
I don't know what they did, I don't care either, it is working now. They said some part needs to be changed. Ohh, I remember now: first they gave it back, it was still buggy, then they have changed the motherboard, I have a new IMEI now, and it is working.
Nokia knows NOTHING about this, they say they haven't experienced **bleep** like this.
Keep trying.

Camera freezes phone everytime!! - N8

I bought this phone (N8) for its camera capibilities, and now whenever I try to use it, it freezes the phone completely! Like **bleep**? This phone has been nothing but problems ever since I bought it new... Anyone have any insight?

1) it takes 2 weeks (10 working days - Monday to Friday except Sunday & public holiday) to repair my N8....This is because the shipment of the motherboard is delay.....It will take only 1 weeks (5 working days) if the the motherboard arrive earlier...
2) just bring your N8 together with original purchase receipt & original warranty to nearest Nokia Service Center.....You can find nearest Nokia Service Center either by refer to your warranty card or check on Canada's Nokia website....also you can ask help by dropping by at shop where your buy this Nokia N8
note :
- before you send your N8 to Nokia Service Center....make sure you backup (in .nbu format) first all your data inside your N8 using either Nokia Suite or Nokia Ovi Suite...
- this is because they will format & delete all your data inside N8 (including mass storage E: ) & upgrade your N8 operating system to Symbian Anna (even you have update to Anna already)

Notifications freezing phone

It mainly happens while typing, but when I get multiple notifications in quick succession (such as someone sending 2-3 texts quickly) the phone will freeze while the notification banners slide in, unfreeze for a second, and then freeze again when the next banner starts to slide in. The phone will unfreeze one the banners have gone away.
It's very frustrating when a group conversation is going on and messages are coming in multiple at a time. It isn't only message notifications either. Any notification with a banner will cause this.
Anyone else experiencing this?

I want to try this before I send mine back in. Just got a replacement. I dont understand what you mean when you state "formatting the user data and the cache". How do you do that?

4.08.605.15.710RD freezing phone

So this morning, my phone tells me I have a system upgrade. Once 4.08.605.15.710RD completed, my phone will freeze - when it sleeps / when in the middle of "anything" / etc.
Not a good thing and I need to revert back to the last system level before this "upgrade". How do I do it? HELP !!!!~!~

You can't go back to the Last OS you can how ever do a Factory Reset it will phone to Adjust to the New Soft Wear there are times when it Has Be Done on my Droid X when a New OS came out i done a Factory Reset Did the Same thing when i had my Incredible. one thing to Remember is Back your Contacts & and important Info Customer Service can assist you if you need Help in doing this or by going to a Corporate Store they can as Well..

EAP-PEAP & EAP-MSCHAPv2 freezes phone

Similar Messages

Maybe you are looking for