Early 2008 mac pro 8 core quicktime videos opening in java script code

When I try to view a quicktime video it opens in Java Script Code instead of playing the video on my early 2008 Dual Quad Core 2.8 Ghz. Mac Pro running OSX 10.5.8

That's not much to go on, but I doubt it has anything to do with it being a Mac Pro. Select the clip and Get Info (Cmd I) to see what application is named in the "Open with" drop down menu. If it is anything other than QuickTime player, change it and try again. Also, repair your permissions...

Similar Messages

I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations? Thanks.

I need an "Open CL compatible graphics card for an early 2008 Mac Pro with 1 gig of V-Ram", any recommendations?
Thanks.

BlackList:
Final Cut Pro X, Motion 5, Compressor 4: Graphics card compatibility
WhiteList:
Final Cut Pro X, Motion 5, Compressor 4: Using OpenCL-enabled graphics cards
OpenCL graphics cards available now, for any Mac Pro model, for a reasonable cost:
Apple 5770 US$250 Avail: in stock
Apple 5870 US$450 Avail: 2-3 weeks

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Early 2008 Mac Pro + ATI Radeon HD 4870 = Not working

Just took delivery of my new HD 4870 video card today. I installed it in my Early 2008 Mac Pro and booted up. I got a picture no problem on one monitor, but nothing on the other. Furthermore, the display perfpane was missing a lot of controls, like Arrangement and Detect Displays and whatnot.
I did a bunch of rebooting and swapping of cables, and determined that both the mini-display port and the standard DVI connection will drive a monitor. However, if both are plugged in, the only active display is the one plugged into the mini-display port, and there's no option to setup the secondary display.
So I booted into bootcamp, and it automatically recognized both display ports, and mirrored my desktop on both monitors. I downloaded and installed the latest windows drivers, rebooted the machine into windows once more, and was able to configure a multiple monitor display with no problem.
This tells me it's not the card and it's not the motherboard.
Booting back into mac OS, I discovered that it doesn't even recognize that the card has video ram. It thought I had no video ram in the system.
So, this all leads me to the conclusion that Apple shipped me a card that it has not yet provided driver support for.
Hey Apple, can I have my 4870 display driver now?

Hi again,
It was funny to read all your answers on my iPhone while away from my computer. I could have reply on the iPhone but I preferred to wait to give you all the procedure I used to install the beta driver successfully this morning.
To start, I found this link:
http://www.insanelymac.com/forum/index.php?showtopic=155477
and followed the "4870 INSTRUCTIONS", starting like suggested by doing the "First, follow the 4850 INSTRUCTIONS above"... (See the link)
I would like also to specify that I did this without having installed the card physically yet. So I kept my HD 2600 in the computer, followed all the steps excepted for the step 3:
3. Reboot with -f -v (kextcache/verbose mode)
There is no -f nor -v switches available for the reboot command at the shell prompt. I simply rebooted as usual "Pomme -> Redémarrer".
After the reboot, all my software was still working as expected with my HD 2600 card, meaning that these steps are specific and active only for the HD 4870 when it's detected at boot-up.
You may have to Google for the string "Kext" in order to get the application to install the file ATY_Motmot.kext. For your information, ATY_Motmot filename is the same string as the one found under "System Information ->PCI cards" under "Name".
I get:
ATI Radeon HD 4870:
Name: ATY, Motmot
The article is not clear regarding where to find the OpenGL.framework to backup before installing the downloaded one. I found mine under:
/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/OpenGL.framework
After having shutdown the computer, just after the reboot that proofed everything was ok, I removed the original HD 2600 card and put back the new HD 4870 and boot up...
Then I check the "System Information" and found both "Quartz Extreme" and "Core image" supported!
I launched Aperture, got it!
I launched Final Cut Express, got it!
I launched Starry Night Pro Plus, got it! Then I checked the OpenGL settings in Starry Night Pro PLus and activated both options:
Use shaders where available
Use AllSky shader (Not compatible with all hardware)
When I was doing these actions with my original HD 2600 card, the software was giving me a warning that my hardware did not support these options and that it could crash.
This time, with the HD 4870, it accepted my settings and give me back a very beautiful blue sky with much more shades!
So in conclusion, it works very smoothtly with my system and I am writing this with two monitors, having bought the MiniDP to DVI adapter this afternoon
I am happy!
P.S.: A girl from Apple support called me back this afternoon regarding my problem. She was very happy two when I told her that I did apply the beta driver and that it was working very well...
Good luck and best regards...

Early 2008 Mac Pro + nVidia 8800: Never going to work?

This forum is littered with threads about early 2008 Mac Pros with the nVidia 8800 card - none of them positive.
I was unfortunate enough to wait for Apple to release such a machine and buy it. Graphics performance is dire given the hardware available. The machine routinely crashes with the window manager hang problem (the user interface just locks up, yet network services etc. still work), in the way familiar to anyone blighted by this particular bug; just run the Folding@Home client on your machine if you want to experience the joy. Or screensavers, sometimes, so I've had to turn those off. And I've had to turn off monitor power saving too, because I too suffer from the 'monitors sometimes don't wake up' bug. And of course I can't sleep the machine either, because firmware upgrade or not, it's still not reliable. And after all this, still the machine crashes.
SSH to the machine; try to restart cleanly; even 'sudo reboot' won't restart it. Apple have achieved something I've never seen out of any Unix or Unix-like operating system, ever; the kernel is unable to kill its own processes.
There have been no indications from Apple that I've seen on these forums over several weeks that the problem is even being acknowledged, let alone tackled. Latest reports indicate that even the 1st gen Mac Pro owners are suffering if they install the 8800.
http://discussions.apple.com/thread.jspa?threadID=1460752&tstart=0
My machine rarely makes it through the day without a forced reboot due to the window manager hanging. I can't do any work on it. I can't rely on it. I can't enjoy it. I can't even use it for web browsing without fear of it hanging.
There seem to be no facts about this at all. So all I can ask for is opinions. Does anyone have any offering of hope that early 2008 Mac Pros might ever work properly with 8800 cards? Y'know, little things, like actually being able to handle graphics? Or sleeping the monitors? Or, heaven forbid, sleeping the whole machine? Or should I just send it back as unfit for purpose?
Yours, tired and exasperated... :-/

I posted this in some other blog (forum), I should have posted this here also but I hope this gives you and all with these problems hope!! I also ran some fish tank test some else posted to get the folding problem to happen and I can not get it to happen at all now, and since my 8800 went in I get NO LOCKUPS, SCREEN FREEZES, shaky blurry video when I boot, so far NOTHING, IT JUST WORKS!!!!!!!!
Now that I think about it the person who said to use the fish tank program had a bad 8800 and maybe you do also!! here is the link to that:
http://discussions.apple.com/thread.jspa?messageID=6965475&#6965475
I purchased my first mac pro early 08 2 months ago (amazon.com).
2 quad core 2.8's, 2 gig apple 4 gig OWC total 6 gig ram,2-WD raptors (1st mac 2nd boot camp winxp 32 bit), apple care.
I had all my problems with the ATI card (I always purchased ATI, never Nvidia, for all the PC's I built) a couple of times I bought the first ones out, these had all kinds of problems until good drivers that actually worked were released (usually 6-12 months after the release of the card).
So I try not to buy routers, graphic cards, etc.. for at least 6-12 months, but back to my 2600 card!!
When I received my mac the graphics would freeze, I did a lot of online reading only to find out the ATI 2600 was the problem, the cure was to hook up 2 monitors to the card (and that worked!!).
Then they came out with the firmware update, now my main monitor would after 2 days on a reboot be scambled (samsung syncmaster 213t, NEVER had ANY problem with it before on any PC I had, so I knew it was not the monitor) to fix the problem I had to either turn power off to the syncmaster or resetting PRAM (worked for a couple more days, then the same problem).
I called apple and they sent a tech out within days to replace the ATI card, the replacement did the same thing after a couple of days, so I called Apple back and they took a bunch of info from my computer (BTW not much at all loaded in the mac side) and said to call back in a week, so I called back a week later and they said they were going to exchange the card for either another ati 2600 or the Nvidia 8800, I said 8800 and a day later on a saturday I received it, swapped the card and NEVER HAD ANY PROBLEMS at all!!
So I don't know if the ATI card has problems with certain monitors or they are just poorly made (maybe AMD is mad with Apple that Apple did not use AMD processors).
I have read others that swapped with the 8800 and their problems went away also!!!!
Maybe some have no problems with the 2600, but I would not recommend it to anyone, if you can avoid the 2600 GO WITH THE 8800, the drivers will get better (and the 8800 will eventually outperform the ATI)and you will not be sorry.
Apple is awesome, they are 2nd to none, their is no other company like this anymore that I have dealt with in a long time (not just because they gave me a 8800), like I said in the beginning of this post I always purchased ATI cards and would have kept it if it would have worked but 2 doing the same, ATI [AMD] has lost my support until they prove otherwise.
I recommend Mac's to everyone now!!
good luck and let me know it any of this has helped!!!!!!!!!!

Early 2008 Mac Pro to run Yosemite?

Hello all.
I have an early 2008 Mac Pro 3.1 with quad-core Intel Xeon and I am trying to do a clean install of Yosemite with a bootable USB flash drive. When I power up the machine (while holding option key) I see the Yosemite installer. I double click it. I get the apple logo with the progress bar across the bottom, but it only gets about 25% of the way and then I get the circle with a line. Any ideas? I have upgraded the EFI per (EFI and SMC firmware updates for Intel-based Macs - Apple Support)
Thank you!

The installer flash drive is defective or you don't have a 2008 MP.
Upgrading to Yosemite
You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
Upgrading to Yosemite
To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks/Yosemite- System Requirements
    Macs that can be upgraded to OS X Yosemite
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Need help with graphics card options for an early 2008 mac pro

Hello,
   I have an early 2008 mac pro with 2 x 3.2 GHz quad core Intel Xeon and 6Gigs of ram, currently running with an Nvidia Geforce 8800 GT with 512mb.
    It is also running 10.7.2.
   I would like to either add a video card on top of the one I am currently running or replace it completely if necessary.
   I do video editing on the Mac, no gaming and only a small amount of photoshop, and as the resolutions get larger I would like to have my machine keep up.
   My questions are,
     1. What cards would you the community suggest?
     2. Can I add a whole other card to my system or do I have to replace the current one?
     3. If I can hold two cards what special accomidations would be needed in regards to final cut performance if any?
    Thank you for any help you would like to give.
Rob

The two main cards for mac pros are the apple versions of the ATI Radeon 5770 and 5870.
The 5770 requires one aux power adaptor and the 5870 requires two. So generally you could only have one 5780 or two 5770's.
Video cards which don't require aux power should be able to coexist with these cards so log as it's all within the power supply maximums of course.

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but th

Purchased a early 2008 Mac Pro in 2010. Yesterday I updated my mac to System 10.9 and now I have a dialogue box in system preferences saying I need to update the NVIDIA CUDA drivers but the servers are unavailable. I download a driver from the site but the Mac would not open it. This system has an ATI Radeon HD 2600 XT 256 MB graphics card. What do I need to do. Do I need a new Card?
David Rosenblatt
<Email Edited By Host>

Vista Ultimate 64-bit recognizes 8 cores. 32-bit recognizes one physical cpu.
I've had very little trouble in two years. And now I do like Windows 7 but also eager for the RC.
I've been using the latest Nvidia. There is a method to the madness of how to uninstall/delete and install graphics drivers, or madness in the method. The W7 drivers are easier.
Nope. Something else. More sensitive to disk errors. You aren't running a program to boost fans. Something.
And some AV software is more prone to causing trouble. But all you need is a good AV/malware program, and even Norton AV 2009 is acceptable, or Avast or one of the others.
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0

Compatible graphics cards for the early 2008 Mac Pro 3,1?

I have an early 2008 Mac Pro 3,1 with the 2.66Ghz Quad core processor that is running Lion. I had an ATI Radeon Card in there that didn't last very long (I've read not great reviews about them recently) and now I need a replacement that will be compatible with my system and that will last me longer than my previous card did. The problem is I don't know what my options are. Can anyone reccomend me a viable replacement? I do video/audio production so something high end would be nice.
Thanks,
-RH

There are some good ideas, comments and tests just how much difference and in what applications.
The differences between 2.5GT and others are less than you might think.
There is no-compromise performance for some areas of CS6 and CUDA with ML and GTX 570 or above. The new EVGA GTX 660-Ti FTW w/ 3GB $330 looks to be very popular and that is the "mid-range" today, compared to $400-500 where GTX 680 sits or ATI 79xx series.
If you have to use 10.6.8 that is a bigger factor and some cards require 10.7.4 or later.
The 5x70 were average cards when they came out. There is no reason to have a system where early boot is totally dependent upon firmware and couldn't do basic video. Anyway some people are willing to swap out the 5770 and keep it just for debugging.
As to the original question: can't tell if you were interested in asking if a MacBook Pro Retina or something else... kind of hard to argue. A 12-core 3.33GHz with 48GB and 5 internal hard drives - it is hard not to do whateer you throw at it esp. if cost is not the primary concern but work is and it is suppose to pay for itself.

How do I fix my early 2008 mac pro boot hard disk. Lost everything when it crashed hard, can not reinstal via cd/dvd drive... are there any fix get it boot from dvd drive?

I have an early 2008 MAC PRO Quad Core 3.0ghz processor. 8 Gig of rams, with a 1 Gig memory Radeon 5770 HD Graphic Card running the latest Version of Snow Leopard OS. Last week lighting struck the house take out all of my hard drives (4) thank god the surge protector mitigated the mother board from damaged, use the Parted Magic to check out the motherboard and it intact with no damage. I can boot with the Parted-magic and be able surf and post this question to this forums. I replaced a newly formatted hard drive and trying to installed OS X Mountain Lions to the new drive, but unable to have it boot in my MAC PRO DVD, I get the usual chimes during the booting processed but the screen remain blackout, but able to boot with Parted-Magic to surf the web and access Apple sites/forums.
I am not well verse in using the Parted_Magic to repair or get my-mac to boot normally so I can reinstall OS X. Any help would appreciated.
Thank you
Disabled Veteran.

Go to System Profile and look, does it say "MacPro3,1"?
That is 2008.
FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
You can but take a hit in performance.
Sounds like MacPro1,1.
Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
In 2007 March an 8-core 3GHz did come out 2,1.
So just to be clear.
===========
It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
You should be fine iwth Windows 7 DVD and one drive, or even XP.
Make sure you take your time and reconnect cards etc properly and any cables.
Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
Why aren't people Cloning as a Backup Strategy
Carbon Copy Cloner 3.4.2
How To clone

Problem on my early 2008 Mac Pro

I had this problem with my early 2008 Mac Pro which started last week.
Some background; I'm using 8GB RAMs, using Snow Leopard and bootcamp Windows 7 and 3 days before the start of the problem, I had replaced the original 320GB HDD for 640GB HDD and reinstalled both OSes.
While I was playing some videos in Windows 7 last week, it displayed the blue screen with memory dump message and restarted on its own. Thereafter, I was unable to load Windows 7 and SL respectively, both hung before they can be loaded. In SL, I noticed that there were some faint red dots in the Apple logo and subsequently, the entire screen started to flicker with some random black and white strips. In Windows 7, it frozen at the Windows logo with a 640x480 resolution. My default resolution was 1920x1200. However, I managed to loaded into the safe mode of Windows and extracted my work.
I tried to re-install SL and it hung again at the Apple logo followed by the flickering.
I sent it to my local service centre and the technician removed my video card, RAMs and memory risers and cleaned the contact, ran the stress test overnight, AHT3A152 and ASD3S123 tests and concluded that he found no issues with the hardwares and the problem did not occur again.
The Mac Pro was sent back to me today and earlier, I started up with no problem and decided to remove the Windows partition and I restarted it again to confirm everything was ok. However, at the next startup, the problem re-surfaced and I could no longer start up my Mac Pro in SL.
I tried to swopped back the original 320GB HDD, but the problem still persists. Before I send back my Mac Pro to the service centre tomorrow, I would like to have some 2nd opinions. Based on my description, what is the likely cause of this problem, is the newly replaced 640GB be the root cause?

Do you keep Windows on its own hard drive?
I would have kept the 320GB while using Windows WD Lifeguard to test, zero, run extended tests and slow long format of the new WD 640. Then just cloned system to new drive.
Casper 6.0 seems to be great utility if you want to avoid reinstalling 7, though I've found 7 to be fast and easy to install even with dozens of programs to add.
Are you using the current / latest graphic driver for 7? I don't notice you even list which card.
RAM - there is no perfect test, AHT finds some while Memtest takes time and may find others.
Windows may be more sensitive to weak hard drive sectors and memory than Mac OS or than HFS+.
Do you have any 3rd party devices? PCIe? Cables etc?
And you can't boot off Windows 7 DVD or Safe Mode?
Windows should automatically offer to boot in Safe Mode.
Also, try restore from last good restore point.

Early 2008 Mac Pro 3,1 Mystery Logic Board/GPU Issue

I recently received an Early 2008 Mac Pro 3,1 for free because the owner couldn't figure out what was wrong with it. It would boot up with the startup chime, but never output any video, and kept rebooting and replaying the startup chime. Using the diagnostic LEDs on the logic board, I was able to see that the Power Good LED (LED 7) and the EFI LED (LED 9) were both on, but the GPU LED (LED 8) never lit up. After trying all the PCI slots and confirming that the graphics card worked in another Mac Pro, I confirmed it wasn't the graphics card. I then tried a different power supply and different power supply cables, different RAM, different RAM boards, but still nothing. (Note: I also went through all the usual stuff: Power Cycling, PRAM, SMC Reset)
I then ordered a replacement logic board (used from eBay) and spent the weekend swapping out the logic board. After the swap, the Mac Pro STILL won't output video, and now the EFI LED (LED 9) won't even light up. Tried resetting the EFI Firmware via a CD, and still nothing. Does anyone have any idea as to what the issue could be? I'm 95% certain I plugged everything back in correctly on the board, but I don't know what else to do other than tear it apart again to confirm everything is plugged in. The only other thing I can think of is that the second logic board I received was also bad.
Please help!!!

Your problem sounds like a graphics card problem to me.
confirming that the graphics card worked in another Mac Pro,
Was this also a Mac Pro 2008 model? was it running the same Mac OS X version as you are testing? what version?
what graphics card are you trying to use? Genuine Apple or flashed PC or unflashed PC? what Mac OS X version?
That second board sounds Bad to me if it won't say EFI-OK.

Can you marry a thunderbolt display to a early 2008 mac pro?

can you marry a thunderbolt display to an early 2008 mac pro?

You will need a DUAL-LINK DVI cable for that display.
<http://www.amazon.com/DVI-D-Male-Dual-Link-Cable/dp/B003QNDEGA>
Your video card is designed to run two 30" displays, but is getting old. Cards that age do fail due to bad capacitors, bad solder, of stuck fans.

Installing OS and Apps on SSD boot drive on early 2008 Mac Pro while keeping all other data from old iMac on hdd

So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!

How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Hi everyone,I am new to this so please forgive me any mistakes I may make.Early 2008 Mac Pro desktop installed ML ok but next day nothing, reinstall ok restart same problem ML installer remains on my snow leopard disk. Any help appreciated.Kind regards

There I go first mistake straight off. I was wondering how to fit my big long problem in. My fault I am sure but if anyone can help please.
Early 2008 Mac Pro Desk Top, 2 hard drives 1)snow leopard, 2)lion.
I have downloaded Mountain Lion usuing disk 1,selected no.2 as my destination, installed ok everything fine, set my startup as no.2 in preferences, switch off. Next day start up - nothing, my only way to get moving was physcally remove disk 2, and let snow leopard restart.
Reinstalled, everything fine, then same problem on restart next day, remove disk,and so on.
The mountain Lion installer remains in the snow leopard dock.
I know the problem is me, so if anyone is kind enough to be able to offer a solution it needs to be in easy speak (press button a, press button b) because I am not that savvy.
my best regards to all, and thank you.

Where did you get Mountain Lion? Did you download the 4+ GB file from the App Store? If so, then I would try doing the following:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your second drive on which Lion is installed (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Install Mountain Lion
Double-click on the Mountain Lion Installer application in your Applications folder. Follow instructions to install Mountain Lion on your old Lion drive - Drive 2. When the installer finally finishes it will restart the computer automatically from Drive 2. At this point there is no need to change the Startup Disk unless you want to boot from your Snow Leopard drive.
You will startup to the Setup Assistant in which you will configure your own admin account. You can, if you want, omit that part and instead choose to migrate your Home folder and other data from the Snow Leopard drive. I would recommend you do that unless you wish to do it manually at a later time. In this case create your new admin account using the exact same username and password that you now use on your Snow Leopard system.

Early 2008 mac pro 8 core quicktime videos opening in java script code

Similar Messages

Maybe you are looking for