Early 2008 mac pro has an infrared sensor?

early 2008 mac pro has an infrared sensor?

okay-what, am I a salesperson now? dunno why you can't google it yourself, or get me a job doing this (just kidding--sorta)
anyways, you could try either twistedmelon or a bluetooth presentation remote (targus or Kensington,maybe logitech.
I think i've done enough here....just fyi, bluetooth on a mac pro desktop isn't great....
getting a dongle for that might be helpful.....
John B

Similar Messages

Why are there so many problems with the early 2008 Mac Pro ???

Hi everybody out there using Mac Pro's early 2008,
I found out there is a lot of problems with the early 2008 Mac Pro.
My early 2008 Mac Pro has been repaired ones under warranty and now it stopped working again ! Also see under: Mac Pro early 2008 no chime and does not start up. Why is this ????
It worked well for about 2 years and then it just fails and i had this failing issue twice already !!! Is this just a BAD Apple product or how do you think I need to approach this. Let’s face it, these machine don’t come cheap and you at least expect them to work without problems for 4-5 years. What is happening here ???
Cheers, Kavango

go to a black screen after 15 minutes or a couple hours
That is probably an indication that you need to find a new graphics card.
RE: Mac Pro Replacement Graphics cards
1) Apple brand cards,
2) "sold in the Apple store" cards, and
3) "Mac Edition" cards ...
... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
1) Apple brand cards:
• Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
• Apple-firmware 5870, about US$450
2) "sold in the Apple store" cards
• NVIDIA Quadro 4000, about US$1200
• NVIDIA Quadro 5000, about US$2500
3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
• SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
• EVGA GTX 680 Mac Edition, about US$600
The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
If you are Meet ALL of these:
• running 10.8.3 or later AND
• don't care about "no boot screens" etc AND
• can re-wire or otherwise "work out" the power cabling, THEN:
You can use many more cards, even most "PC-only cards"

Early 2008 Mac Pro frequently shut downs during start up, Help!

Hello all,
My early 2008 Mac Pro has gradually started having the following problems:
It will often shut down when it goes to sleep.
It has shut down randomly a few times.
And just today it shut down about 5-10 seconds after being turned on. It took about 6 tries before I could get it to turn on.
I have tried all of theusual software remedies (disk utility, different startup drives, resetting the SMC, PRAM, etc.)
I have run apple hardware test on loop for several hours with no errors appearing...
The computer also often loads up to a circle with with a slash through the middle sign, though I am not sure if this is related (it started happening when it switched my system over to a SSD).
I am wondering if this is simply a slowly sying PSU and if replacing it might help? If there any way of monitoring this perhaps? I somehow thought that if it was the PSU then it would simply die completely rather than fade like this...
Any ideas much appreciated!

There are multiple threads and reports of issues with Icy Dock - there is one on Amazon that lines up properly.
The drive sled length of 2009-2012 Mac Pro are longer. Maybe OWC needs to be clearer.
You'e right half-way and maybe some corrupt plist or interferring process you have, or even another hardware item or cable - external - even printer drivers or something that refuses or does not like sleep. Controller card?
All around I'd have to vote for Samsung 830 model. Then Intel 520. Crucial is out with x4 now (Or is it "V"?)
SSD firmware continues to be trouble. Even May-June the SandForce firmware had major issue and reason to hold off any using theirs. Reason to see if yours needed to be updated. Someone last week with m4 found they had old firmware and needed to update it.

I have an early 2008 Mac Pro, which has re-booting problems. Also what does the spinning beach-ball indicate?

Hi, I have an early 2008 Mac Pro which has re-booting problems.
Processor speed is: 2.8
Memory: 2GB 800 MHz DDR2 FB-DIMM
2 x 28GHz Quad Core Intel Xeon
I am running OSX Yosemite Version 10.10
My Mac Pro keeps re-booting. Last year I had to replace my graphics card. My original card was the ATI Radeon HD 2600 XT 255MB, and that is what I have now. At this precise moment my Mac Pro is running perfectly, except that it is slow and the spinning beach-ball keeps appearing. I have managed to do some work with the disk utilities, verifying, cleaning and partitioning. Some errors were found and when it was cleaned this seemed to help my Mac Pro to function properly. Although I am able to use my Mac Pro now, from day to day I still experience re-boot problems. Also quite unexpectedly my mac dictionary has an error, it closed itself down and will not open at all, I had the message to say that a report will be sent to Apple.
I have tried starting my computer with an external hard drive fitted via a USB cable, I use for back-ups. This worked and I was able to wipe my hard drive clear and replace all info from the back up I had done only a few days ago.
This worked for a few days and then the same problem started again.
I am beginning to wonder if I need to buy a new hard drive.
If there is anyone who has some answers to help me solve my problem, I would be most grateful.
Robert

When you have the beachball activity, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Early 2008 Mac Pro + ATI Radeon HD 4870 = Not working

Just took delivery of my new HD 4870 video card today. I installed it in my Early 2008 Mac Pro and booted up. I got a picture no problem on one monitor, but nothing on the other. Furthermore, the display perfpane was missing a lot of controls, like Arrangement and Detect Displays and whatnot.
I did a bunch of rebooting and swapping of cables, and determined that both the mini-display port and the standard DVI connection will drive a monitor. However, if both are plugged in, the only active display is the one plugged into the mini-display port, and there's no option to setup the secondary display.
So I booted into bootcamp, and it automatically recognized both display ports, and mirrored my desktop on both monitors. I downloaded and installed the latest windows drivers, rebooted the machine into windows once more, and was able to configure a multiple monitor display with no problem.
This tells me it's not the card and it's not the motherboard.
Booting back into mac OS, I discovered that it doesn't even recognize that the card has video ram. It thought I had no video ram in the system.
So, this all leads me to the conclusion that Apple shipped me a card that it has not yet provided driver support for.
Hey Apple, can I have my 4870 display driver now?

Hi again,
It was funny to read all your answers on my iPhone while away from my computer. I could have reply on the iPhone but I preferred to wait to give you all the procedure I used to install the beta driver successfully this morning.
To start, I found this link:
http://www.insanelymac.com/forum/index.php?showtopic=155477
and followed the "4870 INSTRUCTIONS", starting like suggested by doing the "First, follow the 4850 INSTRUCTIONS above"... (See the link)
I would like also to specify that I did this without having installed the card physically yet. So I kept my HD 2600 in the computer, followed all the steps excepted for the step 3:
3. Reboot with -f -v (kextcache/verbose mode)
There is no -f nor -v switches available for the reboot command at the shell prompt. I simply rebooted as usual "Pomme -> Redémarrer".
After the reboot, all my software was still working as expected with my HD 2600 card, meaning that these steps are specific and active only for the HD 4870 when it's detected at boot-up.
You may have to Google for the string "Kext" in order to get the application to install the file ATY_Motmot.kext. For your information, ATY_Motmot filename is the same string as the one found under "System Information ->PCI cards" under "Name".
I get:
ATI Radeon HD 4870:
Name: ATY, Motmot
The article is not clear regarding where to find the OpenGL.framework to backup before installing the downloaded one. I found mine under:
/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/OpenGL.framework
After having shutdown the computer, just after the reboot that proofed everything was ok, I removed the original HD 2600 card and put back the new HD 4870 and boot up...
Then I check the "System Information" and found both "Quartz Extreme" and "Core image" supported!
I launched Aperture, got it!
I launched Final Cut Express, got it!
I launched Starry Night Pro Plus, got it! Then I checked the OpenGL settings in Starry Night Pro PLus and activated both options:
Use shaders where available
Use AllSky shader (Not compatible with all hardware)
When I was doing these actions with my original HD 2600 card, the software was giving me a warning that my hardware did not support these options and that it could crash.
This time, with the HD 4870, it accepted my settings and give me back a very beautiful blue sky with much more shades!
So in conclusion, it works very smoothtly with my system and I am writing this with two monitors, having bought the MiniDP to DVI adapter this afternoon
I am happy!
P.S.: A girl from Apple support called me back this afternoon regarding my problem. She was very happy two when I told her that I did apply the beta driver and that it was working very well...
Good luck and best regards...

Early 2008 Mac Pro + nVidia 8800: Never going to work?

This forum is littered with threads about early 2008 Mac Pros with the nVidia 8800 card - none of them positive.
I was unfortunate enough to wait for Apple to release such a machine and buy it. Graphics performance is dire given the hardware available. The machine routinely crashes with the window manager hang problem (the user interface just locks up, yet network services etc. still work), in the way familiar to anyone blighted by this particular bug; just run the Folding@Home client on your machine if you want to experience the joy. Or screensavers, sometimes, so I've had to turn those off. And I've had to turn off monitor power saving too, because I too suffer from the 'monitors sometimes don't wake up' bug. And of course I can't sleep the machine either, because firmware upgrade or not, it's still not reliable. And after all this, still the machine crashes.
SSH to the machine; try to restart cleanly; even 'sudo reboot' won't restart it. Apple have achieved something I've never seen out of any Unix or Unix-like operating system, ever; the kernel is unable to kill its own processes.
There have been no indications from Apple that I've seen on these forums over several weeks that the problem is even being acknowledged, let alone tackled. Latest reports indicate that even the 1st gen Mac Pro owners are suffering if they install the 8800.
http://discussions.apple.com/thread.jspa?threadID=1460752&tstart=0
My machine rarely makes it through the day without a forced reboot due to the window manager hanging. I can't do any work on it. I can't rely on it. I can't enjoy it. I can't even use it for web browsing without fear of it hanging.
There seem to be no facts about this at all. So all I can ask for is opinions. Does anyone have any offering of hope that early 2008 Mac Pros might ever work properly with 8800 cards? Y'know, little things, like actually being able to handle graphics? Or sleeping the monitors? Or, heaven forbid, sleeping the whole machine? Or should I just send it back as unfit for purpose?
Yours, tired and exasperated... :-/

I posted this in some other blog (forum), I should have posted this here also but I hope this gives you and all with these problems hope!! I also ran some fish tank test some else posted to get the folding problem to happen and I can not get it to happen at all now, and since my 8800 went in I get NO LOCKUPS, SCREEN FREEZES, shaky blurry video when I boot, so far NOTHING, IT JUST WORKS!!!!!!!!
Now that I think about it the person who said to use the fish tank program had a bad 8800 and maybe you do also!! here is the link to that:
http://discussions.apple.com/thread.jspa?messageID=6965475&#6965475
I purchased my first mac pro early 08 2 months ago (amazon.com).
2 quad core 2.8's, 2 gig apple 4 gig OWC total 6 gig ram,2-WD raptors (1st mac 2nd boot camp winxp 32 bit), apple care.
I had all my problems with the ATI card (I always purchased ATI, never Nvidia, for all the PC's I built) a couple of times I bought the first ones out, these had all kinds of problems until good drivers that actually worked were released (usually 6-12 months after the release of the card).
So I try not to buy routers, graphic cards, etc.. for at least 6-12 months, but back to my 2600 card!!
When I received my mac the graphics would freeze, I did a lot of online reading only to find out the ATI 2600 was the problem, the cure was to hook up 2 monitors to the card (and that worked!!).
Then they came out with the firmware update, now my main monitor would after 2 days on a reboot be scambled (samsung syncmaster 213t, NEVER had ANY problem with it before on any PC I had, so I knew it was not the monitor) to fix the problem I had to either turn power off to the syncmaster or resetting PRAM (worked for a couple more days, then the same problem).
I called apple and they sent a tech out within days to replace the ATI card, the replacement did the same thing after a couple of days, so I called Apple back and they took a bunch of info from my computer (BTW not much at all loaded in the mac side) and said to call back in a week, so I called back a week later and they said they were going to exchange the card for either another ati 2600 or the Nvidia 8800, I said 8800 and a day later on a saturday I received it, swapped the card and NEVER HAD ANY PROBLEMS at all!!
So I don't know if the ATI card has problems with certain monitors or they are just poorly made (maybe AMD is mad with Apple that Apple did not use AMD processors).
I have read others that swapped with the 8800 and their problems went away also!!!!
Maybe some have no problems with the 2600, but I would not recommend it to anyone, if you can avoid the 2600 GO WITH THE 8800, the drivers will get better (and the 8800 will eventually outperform the ATI)and you will not be sorry.
Apple is awesome, they are 2nd to none, their is no other company like this anymore that I have dealt with in a long time (not just because they gave me a 8800), like I said in the beginning of this post I always purchased ATI cards and would have kept it if it would have worked but 2 doing the same, ATI [AMD] has lost my support until they prove otherwise.
I recommend Mac's to everyone now!!
good luck and let me know it any of this has helped!!!!!!!!!!

Where and what type of solid state drive should I buy for my early 2008 Mac Pro Desktop??

where can I buy and what type of solid state drive should I use to upgrade my early 2008 Mac Pro Desktop??

Rick,
When you get a chance.... DSLReports is off line: their SQL server decided to take its indexes and access to data. Power. Not enough of the right kind of UPS. Same happened to StorageReview's "Drive Reliability Database" about 8-9 yrs ago.
dslreports.com is offline
Fri Apr 20 09:05:55 EDT 2012
SSD: Loading CS5 plus other little monsters might matter.
Lots of small I/Os
latency of 1/100th where nanoseconds replace those "long" milliseconds
System: Small and fast.
DLLoyd even goes for short-stroking drives to get and maintain highest I/O
The new 10k VRs hit 200MB/sec - I still use them and still find them useful, long lasting, feel responsive with whatever I ask of them. I know they get criticized and "cost too much"
Just bought a new WD Black and yes it is better than the 2008 model I was using.
600GB 10K $200 vs $150-220 for WD Black. your choice
I can destroy a 7.2k drive, I have brought ever 10K drive back after a simple WD Extended Test in Lifeguard.
I don't really care about $$/GB or I wouldn't have just bought Intel 128GB $149
Database: the pros put the index in memory and page fix (virtual volumes in memory; cache; hold disk drive index in memory). Caching storage has been around for almost 40 yrs.
Today you can use SSDs as front end cache to hold DB indexes and frequent data for web servers and such adn use slower secondary storage.
SSD + SAS + 4TB storage
Separating the system from data: #1 must
Having data on array: been what I use
I put a large photo library on 2 x 10K VRs vs SSD and couldn't tell much difference (SSD is soundless of course) But my WD Blacks make as much noise and run 15*C hotter than those 10K (not what you expect?)
While 10K and 7.2K are in the 140-180MB/sec range, they are in 3.0 to 12.0 ms seeks, not 0.01 ms.
People wonnder why shrink a drive to 2.5" (or why not go down to 1.8".
How long does it take to reposition a disk head? how often? the 10K VR travels on outer tracks at 70 MPH. Really trying to fly off into space.
It uses one step to find the "zip code" and then another DSP to find the "house."
True of any high density perpendicular recording mechanism.
And of course while the Raptor-X tried to find a home with famers, Cheetah buyers, the WD 10K line has more of a home where servers and small form factor drives - and 100s of them - can fit in a rackmount server I imagine.
Anyway.... if SR and DSLReports can drop out of site due to power and hardware failure and loss... we can learn some and hope to protect our own data and investments.

What upgrade graphic card do i need for a early 2008 mac pro

I have a early 2008 Mac Pro. ATI Radeon HD 2600 XT 256 MB is what i have now. What is a good upgrade graphic card to get.

The GTX 780 6GB runs fine on the dual PCIe internal power cables -- as does the GTX 680 and Radeon HD 7950. The same can't be said of the GTX TITAN or GTX 780 Ti or Radeon R9 280X -- all of which require an auxiliary power feed to avoid a nasty power down of your tower at the worst moment when too much wattage is demanded of the Mac Pro's factory power supply.
Did I mention that the GTX 780 with 6GB of GDDR5 matches the 6GB of GDDR5 in the TITAN?
The one fallacy to my 'sweet spot' award has to do with OpenCL. In case you hadn't noticed, the AMD Radeon GPUs smoked the NVIDIA GeForce GPUs running Photoshop's OpenCL accelerated Iris Blur filter and rendering LuxMark's OpenCL accelerated Room scene.
- http://www.barefeats.com
So depends on budget, whether you want a PC card for less but no "early EFI boot screen" prior to drivers loading, and what apps and needs you have.
The one thing for sure is that 2600XT should have been retired ages ago and even more so with 10.8.3 and above, it could be trouble or just... PITA/POS.

Installing OS and Apps on SSD boot drive on early 2008 Mac Pro while keeping all other data from old iMac on hdd

So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!

How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Hi everyone,I am new to this so please forgive me any mistakes I may make.Early 2008 Mac Pro desktop installed ML ok but next day nothing, reinstall ok restart same problem ML installer remains on my snow leopard disk. Any help appreciated.Kind regards

There I go first mistake straight off. I was wondering how to fit my big long problem in. My fault I am sure but if anyone can help please.
Early 2008 Mac Pro Desk Top, 2 hard drives 1)snow leopard, 2)lion.
I have downloaded Mountain Lion usuing disk 1,selected no.2 as my destination, installed ok everything fine, set my startup as no.2 in preferences, switch off. Next day start up - nothing, my only way to get moving was physcally remove disk 2, and let snow leopard restart.
Reinstalled, everything fine, then same problem on restart next day, remove disk,and so on.
The mountain Lion installer remains in the snow leopard dock.
I know the problem is me, so if anyone is kind enough to be able to offer a solution it needs to be in easy speak (press button a, press button b) because I am not that savvy.
my best regards to all, and thank you.

Where did you get Mountain Lion? Did you download the 4+ GB file from the App Store? If so, then I would try doing the following:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your second drive on which Lion is installed (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
Install Mountain Lion
Double-click on the Mountain Lion Installer application in your Applications folder. Follow instructions to install Mountain Lion on your old Lion drive - Drive 2. When the installer finally finishes it will restart the computer automatically from Drive 2. At this point there is no need to change the Startup Disk unless you want to boot from your Snow Leopard drive.
You will startup to the Setup Assistant in which you will configure your own admin account. You can, if you want, omit that part and instead choose to migrate your Home folder and other data from the Snow Leopard drive. I would recommend you do that unless you wish to do it manually at a later time. In this case create your new admin account using the exact same username and password that you now use on your Snow Leopard system.

External desktop drives for early 2008 Mac Pro: USB 2.0 or 3.0 question

I have an early 2008 Mac Pro 3,1 (OS 10.6.8).
I currently have a 1 TB Fantom Drive with USB 2.0 that I use for the Time Machine. I want to get the second external drive to use as a boot drive so I can install & boot from Mountain Lion to use Maya 2014 3D application software that requires the Mountain Lion OS. For all other applications, I want to stick with Snow Leopard (10.6.8), which works well for me.
Most of the searches I've done for external drives have USB 3.0. Some have USB 3.0/2.0.
Questions:
1. Will one of the USB 3.0-only external drives work with my early 2008 Mac Pro 3,1, which is only equipped for USB 2.0? If so, would I need some sort of adapter? (I realize that the speed would still be USB 2.0 speed.)
2. Or do I need to get the USB 3.0/2.0 external drive (which is more expensive)? I am assuming this would not require any adapter.
3. Will I be able to boot from the external drive with Mountain Lion?
Thanks for any help with this.
S

First, many thanks to both Grant Bennet-Alder and The hatter for their fast responses to my questions. I really appreciate this information. Based on your suggestions I did some research in order to better understand the proposed solutions.
Grant Bennet-Alder wrote:
You can add a PCIe card to get these interfaces:
eSATA
USB-3
1. Does one need to get a separate PCIe card for each interface, or is there one PCIe card for multiple interfaces?
The hatter wrote:
Installing or cloning OS X should be done on SATA II drive bay or external and then moved to the PCIe - depends what card you buy, and some issues are with arrays (no need for system on one).
2. I went to http://www.everymac.com/systems/apple/mac_pro/faq/, which says, "By default, a single 3 Gb/s Serial ATA -- sometimes referred to as SATA 2.0 or SATA II -- hard drive is installed in the first of four bays for all models." I interpret that to mean that SATA II is a in the first bay located on my internal hard drive. Can I create a partition here and install Mountain Lion as a separate system, and then move it to a PCIe SSD?
3. Or, can I install it on my external Falcon Drive (which has a Partition Map Scheme : GUID Partition Table, and which, I believe means it is not a bootable drive). Following that installation could I then move it to the PCIe SSD and boot Mountain Lion from there?
4. Or, if partitioning is an option, can I just clone it to the Falcon Drive for backup?
My apologies for my ignorance. This is not my forte. Thanks for any help you can give.

Early 2008 Mac Pro for home use

Hello guys,
I've been using usual Windows PCs at home (watching movies through HDMI, playing a few games - Counter Strike and random racing games), browsing internet, working in PS and Light room etc, but mostly for watching HD movies. But I was able to get myself Early 2008 Mac Pro - 10gb memory, two dual core intel xeon processors, 256 Ati Radeon graphics cards and 1tb ssd hard drive. Now I wanted to know how good is Mac Pro for home use? As I said I don't do many things with my windows based PC and wanted to switch to faster, quieter mac pro. Any opinions? How good it is as a home entertainment center?
P.S. Counter strike is available now for Mac, so I don't really care about other games.

dump the 2600XT and there I would pay for a Mac Edition AMD 7950, else PC card
1TB SSD is unusual gift
even though 8 cores it is 6 yrs old and most things don't use 8 cores that much, it predates the i7-920,
USB3 has to be added if you want it or put USB3 on your LAN router is what I do.
It does not get the official nod of support from Apple for Windows 8/8.1 but it does if you want run 7 or 7 Pro (dual cpu support)
FBDIMMs have gotten better and cheaper if you want or need to, many do, often due to early death.

Early 2008 Mac Pro - worth bothering with?

Hi,
Someone in my building threw out an early 2008 Mac Pro with no hard drives.
I put in a spare that I have lying around and it seems ok -- but a bit slow. I'm now in the process of installing Mavericks on it.
I'm curious if this computer is worth bothering with? If so, what are some essential upgrades that would make this hum? I'm assuming an SSD? Should I bother finding extra ram for it (it has 4gb now).
What would be some good uses -- I already have an apple tv and a htpc in the living room.. I suppose I can use it in the bedroom? Can this be a functioning secondary computer for my wife who doesn't game but does use iPhoto/Word/Netflix etc? And if so what should I add?
Thanks everyone for your help!

alphaace wrote:
If my wife just watches netflix/browser/word etc --- no games -- but does do a heavy bit of photo editing -- should I upgrade the gpus?
And if so, what would everyone recommend?
Also, I need to buy some hard drive caddies (only one left in it) -- however, I need a converter to put in a ssd right (as they are 2.5")? Any recommendations on those?
I have been able to find Mac Pro drive caddies on eBay. Here's one that would get you a set of 4:http://www.ebay.com/itm/Apple-Mac-Pro-Hard-Drive-Sled-Caddy-Complete-Set-1-4-Mac -Pro-2006-2008-/111386524693?pt=US_Drive_Bay_Caddies&hash=item19ef277c15. The screws appear to all be there.
In terms of adapters, this one was in my 2006 Mac Pro when I got it, and it seemed to work fine, although I didn't keep it in there very long:
http://www.amazon.com/Icy-Dock-EZConvert-2-5-Inch-Converter/dp/B002Z2QDNE
OWC sells a couple of 2.5" drive adapters also.
I wouldn't worry about upgrading the graphics until your wife has had a chance to do some photo editing on it. You may not need to upgrade the card for a while, if ever.

Early 2008 Mac Pro and the 5870

Several sources has stated that this card will work in the Early 2008 Mac Pro, but I am having issues. The card tests as bad and on restart the card is not seen as being installed. I can Screen Share and verify through System Profiler that the card is not seen by the system. Is anyone else having this issue, or is it just my luck?

and this is an Apple version card, right? not a PC.
What other video card did you have etc?
Apple ATI 5770 and 5870 work with 10.6.4+ in all Mac pro models.
ATI Radeon HD 5870 Upgrade
Radeon 5870 vs 5770 GTX 285 4870

Early 2008 Mac Pro-What type of HD? Smart failing?

I have an early 2008 Mac Pro and have two hard drives in it. The main system drive is a 2TB Western Digital drive I installed about a year ago. The 2nd drive is a 1TB Seagate drive which is the original drive that came with the Mac Pro.
When looking at Disk Utility a few days ago I realized the drive is showing up in Red and it's saying that SMART is failing. I've never had this happen before and like having a warning.
First Question:
When SMART shows up as failing can it be a false alarm or is it likely a definite sign of impending hard drive failure? When this happens, does the drive frequently fail quickly or does it take awhile? The fortunate thing is I back this drive up frequently to Time Machine.
Second Question:
What SATA speed does the Mac Pro handle? I see many hard drives that are 3.0GB/s and some that are 6.0GB/s. Does the Mac Pro handle the faster 6.0GB/s? If not, would they still work but just not at the additional speed?
I may consider upgrading to a 1.5TB or 2TB but figured I'll go with a Western Digital or Seagate drive. I see cache ranging from 16MB to 64MB and speeds at 5400RPM and 7200RPM. Between these two which is more important, large cache size or RPM's?
Thank you for your help.

Run WD Lifeguard (*Windows program or their ISO you burn to CD) is best and almost only reliable way.
If a drive has started to use spare blocks it is gone.
IT DOES NOT MATTER. Any 3.5" SATA drive is a drive is all SATA and mostly about features and specs. So just buy the newest size you need. 64MB cache and 7.2K (Green can have trouble on Macs and are more for backup and storing movies etc).
I recommend WD 10K VR newest 250GB 200MB/sec for system $152, and WD Black or Hitachi.
http://www.macperformanceguide.com likes 2-3-4TB.
Questions like this get asked unfortunately.
https://discussions.apple.com/thread/3908030?tstart=0
For every drive, you want to have multiple backup sets (clone and Tm) because drives and backups do fail and you want an alternate boot drive and to restore when needed.

Early 2008 mac pro has an infrared sensor?

Similar Messages

Maybe you are looking for