Early 2011 MBP - Won't install updates?

Today was the first time I've used my MBP since finishing school for the year and I decided to try and install whatever new updates were recently released. However, whenever I hit the option to restart my mac to install the updates it... it seems to just return me to the log in screen, and when I check my Software Updates they're all still there waiting to be installed.
Help?
It's an early 2011 MBP, running OSX Snow Leopard 10.6.8. 2.3 Ghz Intel Core i7 with 8GB RAM - if that helps at all.

Yeah, that probably would've helped, huh?
The latest iTunes, iDVD, iMovie, iPhoto + the latest firmware and security updates.

Similar Messages

Early 2011 MBP Won't Accept Charge

I recently purchased a i7 15" MBP and i am currently having an issue with the battery not accepting a charge. The led on the charger wont light up green or orange. But I've check the charger on another computer and it worked fine and similarly checked another charger on my computer and receive the same plugged in not charging. Any Help Please. I've also tried to reset my SMC but no change.
Battery Information:
Model Information:
Serial Number:
Manufacturer: SMP
Device Name:
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0406
Hardware Revision: 0002
Cell Revision: 0158
Charge Information:
Charge Remaining (mAh): 85
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 6972
Health Information:
Cycle Count: 11
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 10817
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
GPUSwitch: 2
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: No

Same problem with my month old MBP 13", except my battery shows 0 capacity and 0 charge. Called Apple Care today and they're sending packing material so I can send it in for repair. Pretty painless process...

Can't install windows 8.1 on early 2011 MBP

Hey all,
I'm having problems installing Windows 8.1 on my Early 2011 MBP (MacBookPro8,2). When my superdrive died I installed an SSD for the boot drive and kept the original hard drive as a secondary drive. I used BCA (modified to support USB) to create a USB 2 Windows 8.1 install drive from an ISO I previously created. I also had it partition the hard drive. When it reboots I get the "no bootable device found" and blinking cursor issue. I've tried holding down option and choosing EFI, but i've picked up during the last week that installing through EFI on my MacBook Pro isn't possible. Does anyone have any ideas on how to solve this?

I ended up coming across this last night:
http://malwaretips.com/threads/installing-windows-on-a-mac-with-a-damaged-superd rive.32474/
I am in the process of testing this out, but currently I'm stuck with an issue with winclone not expanding the image of the usb install disk to use all the space in the partition. However I did boot into the Windows installer and didn't run into the "couldn't find partition" , "no bootable disk", or "not an MBR" errors I've seen before.
I Think the key for non supported hardware and Windows 8 or later is to create the bootable usb in windows and not through BCA. I actually used the VMWare Fusion trial and a windows 10 technical demo image to do the monkeying around in windows. Hope this helps someone else. I'll keep updating.

Installing Windows 7 on Replacement SSD in optical bay Early 2011 MBP

So i just bought a 120gb SSD and a optical bay enclosure that i installed into my early 2011 MBP. I also bought a optical drive external usb enclosure. I was hoping that I could use bootcamp to install Windows 7 onto the SSD but when i go through the bootcamp menu and my laptop restarts im stuck with a blank black screen. Ive also tried using bootcamp to create a bootable USB (which i had to do a work around to get to work because it supposed to only work for MBA) that didnt work. Can anyone help?

ANYONE???

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

Early 2011 MBP 17 Random Shutdown and Battery Behavior

Hi all, new to the forums here.
I recently purchased a refurbished early 2011 MBP 17' 2.2 Ghz i7 with 8gb and 10.7.5. Out of the box, machine looked great, but I noticed that the power cable was different than the one I had for my early 2011 MBP 15' I have for work. This raised an immediate redflag (buying from a refurb site outside of apple is always a cause for concern IMO) so I abstained from using that charger until I knew a little more. I plugged in the machine and booted it up and everything worked great. The batter was close to 100%, so after charging for approximately 20 min, I unplugged it, and the laptop immediately died. I powered it back on, and the harddrive began to spin for a few seconds, then the same result, total loss of power. Started up again, and I was able to boot into OS X and play around for a bit for a period of time before again, shut down.
For the next few days, same story. I was able to at one point, drain the battery completely and do a full cycle charge. The first time I did this, no change in behavior. Again, a few days later, I was able to drain the battery and perform a full cycle charge, but this time, a major change in behvior. Since the second full cycle charge, I have had absolutely no power problems. I haven't really "pushed" my MBP to see if fully utilizing the CPU/RAM/GPU will produce the similar results I had early, but it appears that everything is working great.
Here a few interesting notes to my situation.
When I was first operating the system (when plugged in, there were no shutdowns, only while on the battery) I pulled up my system report, and noticed that my battery cycle was very low (~5). This seemed odd, because I had opted for a used battery instead of a new one.
Prior to reinstalling Mountain Lion, my volume up key would trigger a few strange events. The screen for briefly get quite bright, then all open applications + the doc and widgets would restart (similar to killing explorer.exe in the windows task manager).
Since performing the fresh install, I have had abslutely no issue with my MBP and I love it, its a beautiful machine. However, as I purchased refurb, I'm hesitant to proceed (I will exceed my return period in ~2 weeks) without knowing my machine is in prime working condition. I have read issues about early 2011 models having issues with batteries and GPUs, but my symptoms were dissimilar to those described by others with those particular issues.
Any thoughts?
I have a genius appointment tomorrow evening for a general diagnostics check, but if others have experienced these issues, I would appreciate some input.

Do a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
You may need to use OPTION D to start it.
Install iStat pro and open Activity Monitor. Set Activity Monitor to show 'All Processes' and '%CPU' to display values from high to low. Post images of the two such as these:
Ciao.

Does anyone know if this HD works with a early 2011 MBP?

Looking to upgrade my internal HD on my early 2011 MBP. Before placing the order, would like to get some professional advice.
The HD being considered is:
SAMSUNG Spinpoint M9T ST2000LM003 2TB 5400 RPM 32MB Cache SATA 6.0Gb/s 2.5" Internal Notebook Hard Drive
Thanks in advance for all advice/inputs

Oh, sorry, I didn't note that I am planning on using logic 8 to attempt this. I don't have access to a machine with logic and pro tools installed to try it myself, else I would.

AMD Radeon HD 6750M, Early 2011 MBP, 10.9.4 Problems

Hello,
Ever since 10.9.3 update I have a serious problem with my Early 2011 MBP with AMD Radeon HD 6750M card.
First my configuration:
MBP 2.2 GHz Intel Core i7 (Macbook Pro 8,2)
16 GB RAM
512 GB Sandisk SSD and 750 Stock HDD
AMD Radeon HD 6750M and Intel HD Graphics 3000
OS X 10.9.4
I'm usually using my MBP with external display with a resolution of 1920x1080. The display is connected via DVI to Mini Display Port adapter. When I connect the external display, my MBP switches to the AMD card. Here's where the problems begin. If I'm using Davinci Resolve, Capture One Pro or any other software (that I use regularly) that uses the GPU extensively, the cpu usage will rise, the computer will start to feel sluggish and my productivity almost becomes none because even the simplest tasks such as opening another tab in firefox or safari takes anywhere between 1-3 sec. When the computer starts doing that, I cannot play a simple HD video at native fps and the whole machine basically becomes too expensive paper weight. The strange thing is that even after I quit all programs, the system cpu usage continues to be high, around 50% with kernel_task being the star using all this cpu and it keeps using all of this cpu forever, at least until i shut it down or disconnect the external display and manage to make it switch to the internal Intel gpu.
The problem started after istalling the 10.9.3 update and it's still there with the 10.9.4 update. I even formatted the computer and reinstalled everything but the problem still persists.
I haven't experienced anything like this on 10.9.2 and the machine was actually quite fast before that. Now, I have too expensive paper weight on my desk.
Since the problem is very specific, I doubt many users will complain and I doubt Apple will ever do anything to fix it, at least until hopefully the new drivers in 10.10 fix the issue hopefully.
My question is:
1. Has anyone else experienced this and managed to solve the problem?
2. How can I downgrade to 10.9.2? I don't have time machine backup but i have bootable usb with 10.9.2. Will it help?
All best,
Goran

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
☞ Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, the iPad Air I also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

Today I purchased an ATT mifi liberate hotspot to use with my early 2011 MBP, along with the iPad Air (128GB, WiFionlyI also purchased today. I've been testing out all the settings on the hotspot, but can't seem to get results with the GPS switch. GPS just spins, searches, doesn'. I can access the hotspots settings in Safari on the laptop and still the problem persisits. I did install some new GPS drivers recommended by AT&T, that doesn't seemed to have work. Could it be that there is a port wrong somewhere? Can anybody make heads or tails of this? Any assistance is gratefully appreciated...

Early 2011 MBP stuck on gray screen, verbose mode shows SMC error too

Hi!
I have and early 2011 MBP, running on OS 10.7.5 is continuously stuck at grey screen upon start-up.
I tried the steps as mentioned in Mac OS X: Gray screen appears during startup - Apple Support article apart from reinstalling OS X. The laptop started after every step, but then stopped again. I tried SMC update, that also worked for once, and on the second start up I ended up with a blue screen. During a later attempt, it worked again for a while, but ended with a distorted graphics after 15 mins. AHT (short version) doesn't show any hardware errors. Now the laptop doesn't go further than grey screen at all, and after a minute or so there's a heavy fan activity. The verbose mode also shows and SMC error, smc: : smcinithelper error: mmio regmap ==null - fall back to old smc mode (AHT Shows SMC version as 1.69f4)
What do you advise?

Try this:
Reset the SMC and the NVRAM:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try a safe boot:
https://support.apple.com/en-us/HT201262
Any success?
Ciao.

My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card. I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card. However, iMacs did. Any suggestions?

My early 2011 MBP 13" does not recognize my Sandisk 16GB 45MB/s Extreme Pro SDHC card. I went to the Genius Bar and we tried it in all the MacBook Pro's in the Apple Store and NONE could recognize the card. However, iMacs did. Any suggestions? Genius behind the Bar suggested wait for LION OS X release...

You really don't need to post multiple times, you will get attention eventually.
Find the reply here:
MacBook Pro 13 (MBP 8,1 random restarts)

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

Macbook air won't install updates

I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
Thanks in advance.

I am sure this has been covered before ... but help! My Macbook Air (purchased Jume 2012, UK) won't install updates. It downloads them, and then when it tries to install it says that an unexpected error occured. I have checked Disk Utility, and its says that Macintosh HD sppears to be OK. Any words of wisdom, folks?
Thanks in advance.

CS5.5 Indesign upgrade won't install "update is not applicable" error

Upgraded to Yosemite, reinstalled legit CS5 InDesign successfully, need to download the upgrade to 5.5 for essential "shared content" plug in... the update won't install "update is not applicable" error w no serial code request, just doesn't install. Indesign 5.0 was working fine, i just need a couple extensions

you can update cs5: http://www.adobe.com/downloads/updates/
but you can't upgrade to cs5.5.
you can upgrade to cs6 or cc (for money).

Imac won't install updates on restart

hello..
my imac won't install update automatically when needs restart.so i install them manually from apple download..why?
Message was edited by: panos_ip

during restart installer window shows up but then mac restart immediately

Early 2011 MBP - Won't install updates?

Similar Messages

Maybe you are looking for