Early Watch Session overdue - Error in Data Transfer

Hi folks,
in my solution, the Early Watch Reports from the productive system are labeled overdue (with a red flag). It says that there is no data transmitted from SDCC.
When calling SDCC manually, it says that I don't have the necessary authorisation (one of the three S_SDCC_* profiles) to call it in the satellite system. I, though, HAVE all of the profiles.
RFC also works fine.
When calling SDCC in the productive system itself, it says: "EWA_SAPOSCOL_B : no matching interface found" " > function module not found" "EWA_SAPOSCOL_B : funcname /SDF/EWA_SAPOSCOL_B , module 001203", which seems to be the real problem. I don't have a clue what that means respective where to look to get rid of it.
Can anybody solve this? Points will be rewarded as a matter of course. Thanx in advance!
Dirk

The red flag means the session is overdue.
Could be for a number of reason - firstly are the trusts correct set? As it appears (from the text you've posted) you cant call SDCCN on the remote system from SOLMAN.
The other reasons could be you dont have the correct configuration setup on the monitored node.
SDCCN Check the RFC settings for Setting-Task specific.
You should have a link pointing back to SOLMAN and this should have the tick for Master set.
Check you have the correct sessions scheduled and they are set against the RFC for solman, not OSS and they are a periodic job.
Sessions needed are
Refresh Sessions
Request session data.
You can manually run the session by right clicking and say run now.
If you are still struggling post additional details.
RTCCTOOL is used to check patch levels are upto date, not the configuration or links. You can still run EWA without being on the latest patch.

Similar Messages

Error in Data Transfer Process (DTP) Urgent!

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL? Please help me guys.....
Thanks,
nips

Please do not post the same question twice.
Error in Data Transfer Process (DTP) Urgent!

Errors in data transfer process

Hi,
i'm getting "Errors in data transfer process" message when i try to run conntrans. when i see the detials error log in trouble shooting ( in client console), i get this following message in detials ( see the bold letters). can some one help me. i have check all the connections between mobile and CRM server. will reward points!!!
2324       96c                               ! Entering 'PullMessages' for queue 'CRM_SITE_000000000000274' / limit 20 messages
2324       96c      Fri Aug 24 20:28:22 2007 E
NewTransferService - _TransferPullMessages : <b>DotNet Stub.TransferPullMessages call failed with fffffffa:</b>(null)
2324       96c                               E
_TransferPullMessages failed with fffffffa
2324       96c      Fri Aug 24 20:28:23 2007 E
regards
Kamalesh K.V

Hi,
We have installed MSA 4.0 (SP12 ). we have also checked QMT config in Mobile sales bin folder. The test connection is sucessfull.( see the below message). we stil have problems in Data transfer when we run connstrans. Please help .
<b>" NewQmtCnfg Version 2.0 for Windows 2000 - revision 4003
Assume running on Client
1. Try to access Communication Station 'MTV01sdCR02', please wait...
... OK
   Try QmtServer component initialize check, please wait...
...OK: QmtServer initialize call returns successfully
2. Try to access CRM Server (Destination '<DEFAULT>'), please wait...
...OK: CRM Server call returns successfully</b>
regards
Kamalesh KV

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song". Please Help!

I recently had a data transfer from my older mac to my newer one. After the transfer I logged into my new account and opened up my GarageBand. It worked perfectly fine, however when I logged into my old account with all my older data that I just transferred over, I could not open my GarageBand files and there is an error that states "GarageBand error after data transfer that states "This song requires a newer version of GarageBand. Please update to the latest version of GarageBand before opening this song".If anyone could please help me with this issue, I'd greatly appreciate it. Thank You!

When you transferred your data from your old mac, you may have accidentally transferred an older GarageBand version and either overwritten your newer version, or your old account still has the old GarageBand icon in the Dock.
Search with SpotLight, if you have more than one Garageband version on your new Mac (type "GarageBand" into the SpotLight search field). Does it list more than one GarageBand version? Then delete the older GarageBand.app.
What GarageBand version have you been using at your old mac, and what is the version on your new mac? If it has been bought recently, it should have come with GarageBand '11.
Regards
Léonie

Error with data transfer configuration in solution manager

Dear SAP Support
i have a problem when i enter a tcode solution_manager > goto > data transfer configuration in my sap solutin manager system. the error appear
The requested URL could not be retrieved
While trying to retrieve the URL: http://solman.wilmar.com:8000/sap/public/myssocntl?
The following error was encountered:
Unable to determine IP address from host name for solman.wilmar.com
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
Your cache administrator is webmaster.
Generated Sat, 15 Sep 2007 10:03:30 GMT by proxy (squid/2.5.STABLE11)
are there any solution so i can fix my problem above. thanks.

Hi Herry,
Are you working in the same network?
Are you able to ping the domain?
Just an idea.
Regards, Ruediger

Errors druing Data Transfer process

Hello!
I go through the SAP BW example and have the following error by generating Data Transfer process.
I have corrected the errors (from "EURO" to "EUR") in CSV-files, but I get still the errors:
No SID found for value 'EURO ' of characteristic 0CURRENCY
No SID found for value 'U1 ' of characteristic 0UNIT
I have recreated the flat files/.csv-files, deleted and created the info cube, but the error still occurs.
What are the steps to fix the error?
How can I know which data source contains the error?
What are the possible values for 0CURRENCY and 0UNIT?
Can some one give some recommendation?
Thank you very much!
rergards
Thom

Hello,
You need to delete the data from PSA after an Unsuccessful load, if you want to load it again after correcting data in the source (Flat file in ur case). Right click ur datasource->Manage. Select the request which failed and hit the delete button (trash) at bottom. Now try loading it again.
To get all possible values of currencies and units defined in your system. check contents of following tables:
TCURC - Currency Codes (field -WAERS)
T006 - Units of Measurement (field - MSEHI)
Thanks

Spool error while data transfer

Hi,
I am trying to give barcode print, I am using Zebra S600 printer. when I issue the print with new spool request & print immediately, System is generating the spool but with error as Internal Error when printing ,Request on hold
Error class: delayed
Area: data transfer
I tried with SPAD also. How to solve this error.
Thanks & Regards,
Karthik.k

Hello,
Can u please tell me it is front end printer or remote printer and also please check that u have installed correct Printer driver.....
if possible then give one demo printout from u r machine instead of from SAP....
Thanks

Error in data transfer using CIF

Hi all,
I am just clueless. I am trying to transfer master data from ERP to EWM but it ain't happening. It is throwing out this error. System:    P6QCLNT800    User: RFC_USER_1 12/11/2010
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text:        Internal error in IGS2, US. RFC: Connection Error.
All my settings and configs are right atleast as per SAP documentation for integrating EWM as an add on. I tried after disabling geocoders for US using the GEOCODERS report. Still I am getting, I have checked my RFC destination and tested my connection it is working fine in SM59. What should I do to proceed further?

Hi Deepak,
Following is the detail I could see:
Cl. User         Function Module                 Queue Name                Destination                       Date        Time
100 SS813794     MCEX_UPDATE_11_QRFC        MCEX11           NONE              27.02.2014 05:33:02
100 SS813794     MCEX_UPDATE_11_QRFC         MCEX11          NONE               02.03.2014 23:00:35
Status                                              TID                       Host      Tran                  Program
Transaction recorded                AC131B362DEC530F145E0001 IGTBILSA VA01                  RSM13000
Transaction recorded                AC131B362DEC5313FE630002 IGTBILSA VA01                  RSM13000
Both the queues which are seen are while I created a sales order in ECC.
If I further double click, it will take me into FM and after clicking queue name 'MCEX11' I could see:
                    LUW Information
        TransID:         AC131B362DEC530F145E0001
        LUW-Cnt:         00000001
Thanks,
AP.

Error in Data Transfer : From CO-PA to SOP Flexible Planning

Hi Friends
I am working on a Scenario of Transferring CO-PA data to Flexible Planning, I am encountering few problems, I have done the followig steps, request you to check and get back to me..
The following configuration steps are done with Example;
Characteristic assignment
u2022 Sales Organization
u2022 Region
u2022 Plant
u2022 Material Number
u2022 Material Group
Key figure(s) assignment
u2022 Sales Quantity
Assignment: Information structure - operating concern
S555 u2013 Z001
Define activities Z1
Mass Processing Job : ZSO-PA
We are able to transfer data from CO-PA to standard SOP, But we tried for transfer to Flexible Planning SOP by creating Mass Processing Job setting as below configuration path.
Production -> Sales & Operations Planning (SOP) ->Functions -> Mass Processing -> Transfer LIS / CO-PA
After executing Job MC8G - Schedule, we checked in Tcode - MC8I u2013 Check, Status: Processed with errors, And also data are not displayed in Tcode : MC95 for Material & active version.
We couldnu2019t find log for error status.
What is the method / Procedure for transfer data to Flexible Planning SOP?
Please get back to me.

Dear,
Status:            Processed with errors ok
Activities checked:? what is the error message here like
   COPY
       Planning type in activity and job not identical
       Planning type of job: SOPKAPAM
       Plng. type of activity:Z004PLAN
When checking a mass processing job in SOP/flexible planning (Transaction MC8I), in the log error message "Activity and COPA profile have different planning versions?
Or planned/actual indicator in the COPA profile?
Version should be        A00
Please check the MC8S. Then an Avtivity in MC8T
after you create the job in MC8D with the acitivity you have defined for your info structure.
After that check in MD62 for plan value.
Regards,
R.Brahmankar

Error in Data transfer ECC to APO

Hello Guys,
I'm getting an error in my system when I try to transfer data from ECC to APO system. When I CIF (after generating IM, when I activate it) older data (master data created previously in system), I'm getting a short dump with mesage class 'XC', It says :
Diagnosis
    An internal condition was found during the
    the system to access a substandard program"
Trigger Location of Runtime Error
    Program                                 SAPLCSER
    Include                                 LCSERU02
    Row                                     101
    Module type                             (FUNCTION)
    Module Name                             CIF_SER_MESSAGE_SERIALIZE.
But when I create a new data and try to transfer it, it smoothly transfers into APO without any dump or error.
Similarly, when I pull the data in APO with CCR, I get short dump while iterating data:
Category               ABAP Programming Error
Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
ABAP Program           /SAPAPO/SAPLDM_LC_SQL
Application Component BC-DB-LCA.
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "/SAPAPO/ORDMAP" or another table accessed in the
statement.
I'm not much aware on LC technology, I have deactivated & activate LC once in LCA10. Also, checked consitency in OM17, it shown no inconsistency. Plus, when checked in OM13, all checks are showing green.
Can you please suggest what needs to be done?
Thanks,
AP.

Hi Deepak,
Following is the detail I could see:
Cl. User         Function Module                 Queue Name                Destination                       Date        Time
100 SS813794     MCEX_UPDATE_11_QRFC        MCEX11           NONE              27.02.2014 05:33:02
100 SS813794     MCEX_UPDATE_11_QRFC         MCEX11          NONE               02.03.2014 23:00:35
Status                                              TID                       Host      Tran                  Program
Transaction recorded                AC131B362DEC530F145E0001 IGTBILSA VA01                  RSM13000
Transaction recorded                AC131B362DEC5313FE630002 IGTBILSA VA01                  RSM13000
Both the queues which are seen are while I created a sales order in ECC.
If I further double click, it will take me into FM and after clicking queue name 'MCEX11' I could see:
                    LUW Information
        TransID:         AC131B362DEC530F145E0001
        LUW-Cnt:         00000001
Thanks,
AP.

Error with data transfer in functional module

Hi all,
I need to upload file to the employee through BDS. (oaor transcation). i am using functional module
function zin_bds_dms_upload.
""Local Interface:
*" IMPORTING
*"     VALUE(P_CLASS) TYPE BDN_CON-CLASSNAME
*"     VALUE(P_OBJCT) TYPE BDN_CON-OBJKEY
*"     VALUE(P_DESCR) TYPE BDN_CON-DESCRIPT
*"     REFERENCE(P_PATH) TYPE SAPB-SAPFILES
data: begin of i_bds_conn occurs 10, " ITAB for the actual
         bdn_tab_i type num08,
        client type mandt,
        classname type      seoclsname,
        classtype     type bds_clstyp,
        objkey type bds_typeid,
        log_system    type swo_typeid,
        loio_id   type char42,
        doc_ver_no    type num08,
        doc_var_id    type num08,
        doc_var_tg    type bds_var_tg,
        descript    type sdok_descr,
        langu   type spras,
        comp_id   type bds_compid,
        mimetype type bds_mimetp,
        crea_user   type sdok_crusr,
        crea_time   type sdok_crtst,
        chng_user   type sdok_chusr,
        chng_time   type sdok_chtst,
        contrep   type bds_conrep,
        docuclass   type sdok_prv_m,
        doc_type    type sdok_prv_s,
        expirytime    type sdok_prv_m,
        bds_docid   type sdok_prv_l,
        loio_id_to    type sdok_loid,
        rela_id     type      bds_relaid,
        state   type sdok_phsta,
        bds_status    type bds_state,
        stor_tab type saearstat,
        bdn_tab_d     type bar_keep,
        note_type     type bds_state,
        objecttext type toasp-objecttext,
        objecttext2 type toasd-objecttext,
        objecttext3 type toasr-objecttext,
        ntext type tojtt-ntext,
end of i_bds_conn.
data: begin of bds_doctype_list occurs 10,
mandt type mandt,
classname type bapibds01-classname,
contrep type bapibds01-contrep,
docuclass type bapibds01-doc_class,
docuclass_text type toasd-objecttext,
doc_type type bapibds01-doc_type,
doc_type_text type toasp-objecttext,
appl_type type toadd-appl_type,
appl_type_text(50) type c,
standard type toadv-standard,
check_box type toadv-standard,
end of bds_doctype_list.
data: file_extension type toadd-doc_type, " file-extension
i_files type bapifiles occurs 1 with header line,
i_signature type bapisignat occurs 1 with header line,
logical_system type bds_conn00-log_system.
data: classname_select type bdn_con-classname,
classtype_select type bdn_con-classtype,
objkey_select type bdn_con-objkey,
mask(20) type c,
answer type c,
mimetype type toadd-mimetype,
i_toadd type toadd,
file_path type sapb-sapfiles,
filename_all type sapb-sapfiles,
file_path_memory(250) type c, " path für SAP memory
file_path_length type i, " length of the file_path
file_name type sapb-sapfiles.
classname_select = p_class.
classtype_select = 'BO'.
objkey_select = p_objct.
filename_all = p_path.
get parameter id 'OAP' field file_path.
if sy-subrc <> 0. " no file_path found.
    file_path = space.
endif.
concatenate ',.' '' ',.' '' '.' into mask.
-- split filename -- *
perform split_path(oaall) using filename_all file_path file_name.
-- set new file_path to SAP memory -- *
file_path_length = strlen( file_path ).
if file_path <> space and file_path_length < 250.
    file_path_memory = file_path.
    set parameter id 'OAP' field file_path_memory.
else.
    file_path_memory = space.
    set parameter id 'OAP' field file_path_memory.
endif.
-- check documentclass -- *
perform get_file_extension using file_name
file_extension.
-- check file extension -- *
if file_extension = space.
-> if no docuclass is found from the document
-> default docuclass from the doctype!
    file_extension = bds_doctype_list-docuclass.
endif.
-- get the mimetype of the docuclass -- *
perform mimetype_get(oaall) using file_extension
changing i_toadd.
move i_toadd-mimetype to mimetype.
-- fill file and signature structure -- *
clear: i_files, i_signature.
refresh : i_files, i_signature.
i_files-doc_count = 1.
i_files-directory = file_path.
i_files-filename = file_name.
i_files-mimetype = mimetype.
append i_files.
i_signature-doc_count = 1.
i_signature-prop_name = 'BDS_DOCUMENTCLASS'.
i_signature-prop_value = file_extension.
append i_signature.
i_signature-prop_name = 'BDS_CONTREP'.
if bds_doctype_list-contrep = space.
    i_signature-prop_value = ' '.                           "#EC NOTEXT
else.
    i_signature-prop_value = bds_doctype_list-contrep.
endif.
append i_signature.
i_signature-prop_name = 'BDS_DOCUMENTTYPE'.
i_signature-prop_value = bds_doctype_list-doc_type.
append i_signature.
i_signature-prop_name = 'DESCRIPTION'.
i_signature-prop_value = p_descr.
append i_signature.
i_signature-prop_name = 'LANGUAGE'.
i_signature-prop_value = sy-langu.
append i_signature.
-- create new document via KPro -- *
call function 'BDS_BUSINESSDOCUMENT_CREATEF'
    exporting
      logical_system = logical_system
      classname      = classname_select
      classtype      = classtype_select
      client         = sy-mandt
      object_key     = objkey_select
    tables
      files          = i_files
      signature      = i_signature
    exceptions
      internal_error = 1
      others         = 2.
endfunction.
*& Form GET_FILE_EXTENSION
try to get the extension of the uploaded file
form get_file_extension using file_name file_extension.
-- data declaration ------------------------------------------------ *
data: length type i,
single_c type c.
data: begin of bds_doctype_list occurs 10,
mandt type mandt,
classname type bapibds01-classname,
contrep type bapibds01-contrep,
docuclass type bapibds01-doc_class,
docuclass_text type toasd-objecttext,
doc_type type bapibds01-doc_type,
doc_type_text type toasp-objecttext,
appl_type type toadd-appl_type,
appl_type_text(50) type c,
standard type toadv-standard,
check_box type toadv-standard,
end of bds_doctype_list.
clear: single_c.
length = strlen( file_name ).
if length > 0.
    while length > 0.
      single_c = file_name+length(1).
      if single_c co '.'.
        length = length + 1.
        exit.
      else.
        length = length - 1.
      endif.
    endwhile.
    if length > 0.
      file_extension = file_name+length.
    else.
      file_extension = space.
    endif.
else.
    file_extension = space.
endif.
if file_extension <> space.
    set locale language sy-langu.
    translate file_extension to upper case.              "#EC TRANSLANG
    set locale language space.
endif.
endform.                    "get_file_extension
example : class = PREL
object = pernr_no
desc = 'leav application'
p_path = file_path
I used this in abap program then it is uploading fine but when used in the web dynpro file is not uploading. On debugging it is showing error in function module SDOK_PHIOS_CHECKIN
error key 5 ie error in transfer.
So please suggest how to upload in web dynpro abap.
Edited by: Bhavya belagal on Dec 22, 2010 11:55 AM
Edited by: Bhavya belagal on Dec 22, 2010 12:09 PM

Hallo Bhavya,
Please do not post like this as it is not readable . Mostly when you describe it in a simple manner you would get more response.
See this thread for answers from Thomas Jung [Re: Approach content repository other way then URL approach|Re: Approach content repository other way then URL approach]
Wiki [http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass|http://wiki.sdn.sap.com/wiki/display/WDABAP/File%2bUpload%2busing%2bcl_fitv_gos%2bclass]
Edited by: Baskaran Senthivel on Dec 22, 2010 2:42 PM

Error in data transfer process

Hi,
Can any one tell me whats the cause of error coming in DTP's process and that too in HEADER tab?It shows red in technical status although data is loaded in the target.
Regards,
Sanyukta

Hi Sanyakta,
if the status is red there is error in loading , you will not be able to view your data in datatargets
when there is an error it usally comes in all the tabs, header details ad status tabs
You check the detail tab for furthur analysis.
For error there may be a lot of reasons
Cheers
Sunil

Error in Data Transfer Process (DTP)

Hi,
ive encountered an error in uploading data from R3 using DTP in a specific cube and it says "Exceptions in Subset: Load and Generation" and "Dump: ABAP/4 processor: MESSAGE_TYPE_X", how can i fix this problem? is there any problem with the upgrade process of our system or in KERNEL? and what is KERNEL?
Thanks,
nips

Hi
It looks like a Memory issue. Try restarting the load when the system is relatively free.
Regardss,
Namrata

Deployment '2700002' to target 'tar152' encountered a system level deployment error during data transfer.

Hi All,
I got this error in atg bcc on UI and console as well when i doing full deployment.
I triyed through snap-shot id but i think this is different issue.
So please tell me where is problem happend.
Thanks in Advance.
--Kakasaheb.

Are you working with a customer with a support contract?
Cause
One potential cause is corrupted data in the epub_file_folder table in the versioned schema and examining the table contents is necessary. This data may be the result of a deployment containing VFS assets that did not complete successfully
The BCC application assumes that the virtual folder structure contained in epub_file_folder is built upon a single root folder. This folder has the name 'root' and has a NULL parent_folder. If another folder in this table has a NULL parent_folder, then the application does not know which is the true root folder. As a result, based purely on chance, the BCC will choose one of them as the root folder of the VersionFileStore (VFS). Depending on which assets are contained beneath that folder, some file assets may not appear correctly in the BCC UI. Another symptom is the inability to deploy any project, including a full deployment.
To check for this particular corruption, perform the following SQL query.
select * from epub_file_folder order by parent_folder;
Putting the table data in a spreadsheet makes it easier to sort the data on various columns for analysis.
If you sort by parent_folder check for data similar to that shown in the following table. Note that there are two folders whose parent_folder is NULL. Here are the relevant columns from epub_file_folder:
folder_id
folder_name
parent_folder
asset_version
is_head
version_deleted
version_editable
ff102063
CorruptFolder
NULL
1
1
0
0
root
root
NULL
1
1
0
0
Solution
Note: Exercise caution when directly modifying the versioned database schema. For assistance identifying this problem and implementing the solution, please open an SR with Oracle Support.
1. Analyze Versioned Folder Data
How you resolve this corruption will depend on whether or not you need to retain the corrupt folder. Examine whether the folder has an asset version that is checked in, marked as deleted, or marked as the head version. If there is no checked-in version with is_head=true, then this indicates the folder may have been part of a failed deployment.
Trace through the hierarchy of folders underneath the corrupt folder. Determine whether there are any folders or files within that hierarchy that you need to retain. In some cases, it may be a single folder created unintentionally by a BCC user. In other cases, there may be more significant folder structure underneath it that is needed by the front-end application.
2a. Corrupt Folder Not Needed
If you do not need the corrupt folder, set its version_deleted=1.
This will mark the folder as Deleted in the versioned repository. As far as the BCC is concerned, neither it nor anything under it will exist and will not appear in the BCC UI. The data will still be retained in the database, though.
2b. Corrupt Folder Needs Correct Parent
If you do need the corrupt folder, determine the true parent folder. Set its parent_folder to the ID of the actual parent.
See the folder_id column for the correct parent folder and substitute that ID for NULL in BadFolder's parent_folder.
3. Restart BCC and Re-Test
After modifying the data for the corrupt folder, restart the BCC so that the repository picks up all the changes.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

Early Watch Session overdue - Error in Data Transfer

Similar Messages

Maybe you are looking for