Earphones not working as remote shutter

I bought an iPhone 4s a couple of months ago. I just found out a couple of days ago that the earphones can be used as a remote shutter release by clicking the + sign on the earphone controls.
However, I have not been able to get this to work on my on phone, so I was wondering if anyone has an idea why.
Thanks in advance.
Elaine

Hi grannersteven93 (not sure what your first name is :~) )
Thanks for your speedy reply!
OK, this probably sounds lame, but I actually haven't used the earbuds yet :~/ I just hold the phone up to my ear to make calls even though my hand gets tired, lol! Also, I don't listen to music on my phone as my "focus" is on photography and I'm obsessed with downloading photo apps :~)
Anyway, I did a little test and listened to a video tutorial. I was able to hear it through the earbuds, but the volume up and down keys on the earbuds don't work.
They are the earbuds that came with my phone and the volume up and down keys on the phone itself work so I think you are probably correct that the controls may be defective. Fortunately, I have Apple Care and should be able to have them replaced with no problem.
Thanks so much for your input! It definitely helped me think of a couple of things I hadn't considered!
Elaine
P.S. I'm in Hillsboro :~)

Similar Messages

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • Earphones not working z1

    i hve sony xperia z1 nd my left ear phones not working i hd checked lots of handfrees but problems still same left earphones not working 
    i m da sony fan plzz help me 
    how to resolve ds problme
    Solved!
    Go to Solution.

    if not then you should contact your local Xperia Care
    http://www.sonymobile.com/global-en/support/contact-us/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • HT4623 I bought iPhone 4S from Kurdistan Iraq while I worked there now I retired and came back to my country India. Few days ago the rear camera of my phone is not working, it's shutter is not opening. It's less than a year I bought it. What to do now?

    I bought iPhone 4S from Kurdistan Iraq while I worked there now I retired and came back to my country India. Few days ago the rear camera of my phone is not working, it's shutter is not opening. It's less than a year I bought it. What to do now?

    First try one of these methodes:
    Try to restart your iPhone
    Hold the power button and slide to turn off, then turn it on
    if you still have the same problem then try the second methode:
    Reset Settings of your device:
    Settings>> General>> Reset >> Reset All Settings
    Make sure you reset only your settings and NOT any other Contents
    if you still have the same problem, so it seems to be a hardware issue, take it to the nearest Apple Store.
    Kind regards

  • Lenovo AIO C440 - not working infrared remote control

    Hello,
    is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
    Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
    Regards,
    Zdenek

    hi bohdik,
    Welcome to the Lenovo Forums.
    The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model,  make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow  the Set up a TV signal in Windows Media Center. guide.
    Note:
    You must have Windows 8 PRO to enable Windows Media Center
    See this articles in reference:
    How to add Windows Media Center to Windows 8 Pro
    How To Install And Set Up Media Center On Windows 8
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Backupeventlog not working for remote system in PowerShell

    I have the following code snippet that works if I specify localhost or the name of the local computer, but does not work if set to a remote server. I am running the script as Administrator using my Domain Admin account. Both local and remote systems
    are Windows Server 2012 and in the same domain. PowerShell version = 3.0.
    Param(
    [parameter(Mandatory=$true,ValueFromPipeline=$true)]
    [ValidateScript({Test-Connection $_ })]
    [String]
    $Server,
    [parameter(Mandatory=$true,ValueFromPipeline=$true)]
    [String]
    $LogFileName,
    [parameter(Mandatory=$true,ValueFromPipeline=$true)]
    [ValidateScript({Test-Path $_ -PathType 'Container'})]
    [String]
    $OutputFolder
    $EventLog = Get-WmiObject win32_nteventlogfile -ComputerName $Server -Filter "LogFileName = '$LogFileName'" -ErrorAction SilentlyContinue -ErrorVariable $ResultError
    If ($ResultError)
    Write-Host "ERROR: unable to event logs from $Server."
    } Else {
    Write-Host "Backing $Server."
    $EventLog.backupeventlog("$OutputFolder\$Server.evtx")

    After spending some more time troubleshooting this and doing some more research I found the link below. I found it strange the hoops the author went through to handle event logs on remote systems until I realized that the path for "backupeventlog"
    is relative to the remote system, not the system running the script. So I checked the other systems and found that the event log backups had been created. This would explain the returnvalue of 80. What's worse is that the path for "backupeventlog"
    can't be a UNC -- I tried, it didn't work.
    Back Up Your Event Logs with a Windows PowerShell Script
    https://technet.microsoft.com/en-ca/magazine/2009.07.heyscriptingguy.aspx
    I decided to re-read Microsoft's documentation and found the magical text that I had over-looked:
    BackupEventlog method of the Win32_NTEventlogFile class
    https://msdn.microsoft.com/en-us/library/aa384808(v=vs.85).aspx
    In addition, you must make backups to the local computer; you cannot save a backup of the event logs on Computer A to Computer B. Backups are implemented by using the LocalSystem account, which does not have the network credentials necessary to access remote
    computers. If you want to save backups to a central repository, modify the script to first perform the backup, and then move the backup file to the central repository.
    jrv:
    I would mark your post of Wednesday, March 04, 2015 9:45 PM as helpful if this option were available. Your comment got me to dig into this deeper and discover
    the root cause.
    Thanks.

  • HP Laserjet 1020 not working through remote desktop

    I have a hp laserjet 1020 that I am vpn and remote desktop to a computer at work. I am suupose to be able to print from remote desktop to my local printer (the hp laserjet 1020) using the microsoft terminal Easy Print. The printer is showing up in the printer list, but when I try to print I get an error of Printer not ready.  The printer is working fine on the local machine, just not through the remote desktop. I have install the printer drivers on the machine that I am remoting into , just to make sure. Is there anything else I can try. I am not finding any firewalls on either end blocking it?

    After many months of frustration and 7 1/2 hours with Microsoft advanced prof support I've finally pinned down this printer and a slew of others.  This problem as far as I have come across deals exclusively with HP printers.  In simple terms:  the drivers are flawed.  This 1022 is a prime example.  It prints locally and via TCP/IP just fine. I have about 7 other printers and dummy printers in my printer folder.  Enter a remote desktop session and ALL of them populate except the 1022.  This shows that the hooks and RDT finders are locating your printers and installing them properly as remote printers.  All except the 1022. 
      Log out of your RDT session: goto the local 1022 setup and change the printer driver to a PCL driver.  I used a 1200 PCL driver.  Now log back into your RDT server and hockus pocus! there is your printer.  Totally un-usable because the driver will not run this printer.  Caveat:  each time I did this XP crashed (I couldn't get to the properties TAB anymore -- I had to un-install the 1022 and then re-install it with at least 1 reboot in the process)
    Moving on we go to the HP OfficeJet/LajerJet2840.  Same thing.  It won't pass through as remote printer in RDT.  Go local.  Set the printer driver to AppleLaserWriter8500 and boom. (same logout, change, back in steps) and your LJ2840 shows up and works.
    While I will have to wait until tomorrow I am betting that this will fix the exact same problem with the HP Officejet 8500A all in one with the exact same problem.
    Hey HP?  Whats with the drivers??
    Another work around if you have a static enough environment is to install your local printer that will not show up under RDT on the server, and then point the port to your fixed IP on your router, and passthru port 9100 to your locally installed printer that is failing.  You can now be on RDT and chooses the network printer that is printing to the TCP address of your home (or office) router.

  • Local Printer not working via Remote Link

    I have a problem with my remote desktop printing to my local printer.  I connect via RD on Windows 7 Home to Windows 7 Pro.  I have installed an HP Laserjet Pro CM1415fn printer.  All prints fine locally.  Also everything printed fine
    but have had to have a recent update to my Remote PC that I log into.  So the printer had to be reinstalled.
    All worked ok for about 6 print jobs then stopped working.  Nothing has changed.  I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode.  I have tried restarting the Printer Spooler in Services
    and rebooting the remote PC but no joy.
    Any ideas please.

    Hi,
    You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
    Take a try with the printer troubleshooter:
    Open the Printer troubleshooter
    Also see if the below thread could help:
    Local Printing with
    Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
    Best regards
    Michael Shao
    TechNet Community Support

  • IPad 2 earphones not working after updating to ios 6 (jack input is clean)

    Hi there, I can see some people have been having problems with their new iPad and earphones in conjunction with ios 6 but did not know if there was a thread established for the iPad 2 yet.
    I updated tonight and along with the fact that ios 6 is a complete letdown I now cannot get the iPad to recognise my earphones. They were working fine 30 minutes before the update so I know it is not the earphones.
    If I keep the app (e.g. Youtube) up and reinsert the earphones it works. However if I switch to check something on another app and come back the sound starts coming through the speakers again.
    Any help or advice much appreciated!

    I had a problem connecting to my exchange server.  It turns out that Exchange will only allow ten devices to be partnered to your account at a time.  Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships."  I followed the instructions and delted all the old accounts...problem solved.

  • PIX 501 config - access to internal network not working from remote VPN users - everything on the inside is OK

    One other thing - I had a problem with the key pairing so I rebuilt the rsa 1024 and the unit started working. Unfortunately I reloaded without the config in place and now I cannot get it to work again. Any help will be greatly apprecaited although I did review a dozen other posts of people having similar problems and for some reason there is never any conclusion as to the solution and I am not sure why.           
    Some other info from the client end:
    I just ran the stats on the client and packets are being encrypted BUT none are decrypted.
    Also Tunnel received 0 and sent 115119
    Encryption is 168-bit 3-DES
    Authentication is HMAC-SHA1
    also even though the allow LAN is selected in the Cisco VPN client it states the local LAN is disabled in the client stats
    also Transparent tunneling is selcted but in the stats it states it is inactive
    I am connecting with the Cisco VPN Client Ver 5.0.07.0440
    This config works. It is on the internal net 192.168..40.x and all users obtain dhcp and surf the web. It has required ports opened.The problem is that you can connect remotely via the VPN and you receive an IP address from the remote-vpn pool but you cannot see any machines on the internal network. The pix is at 40.2 and you cannot ping the pix and the pix from the remote PC connecting via the VPN and youcannot ping the remote PC from the PIX console when the remote is connected and receives the first IP address in the VPN pool of 192.168.40.25
    I need to  see the internal network and map network drives. I have another friend that is running the same config and it works but his computer is on a linksys wireless and has an IP of 192.168.1.x and the IP he receives from the VPN pool is 192.168.1.25 so I do not know if the same network is allowing this config to work even if there is an error in the config. In my present case I obtain the ip of 192.168.40.25 from the VPN pool and my connecting pc on 192.168.1.x    I really am not sure how the VPN virtual adapter works. I am assuming it routes all traffic from your connecting PC to and from the virtual adapater but I really do not know for sure.
    Other people have had similar issues with accessing the internal network from the VPN. One solution was the split-tunnel, another was the natting and another had to do with the encrption where there and an issue with the encrypt and ecrypt which was stopping the communicaton via the VPN.
    I still cannot seem to find the issue with this config and any help will be greatly appreciated.
    This is the config
    interface ethernet0 100full
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password somepassword
    hostname hostname
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    object-group network internal_trusted_net
      network-object 192.168.40.0 255.255.255.0
    object-group icmp-type icmp_outside
      icmp-object echo-reply
      icmp-object unreachable
      icmp-object time-exceeded
      icmp-object source-quench
    access-list OutToIn permit icmp any xxx.xxx.xxx.0 255.255.255.248 object-group icmp_outside
    access-list no_nat_inside permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
    access-list split_tunnel permit ip 192.168.40.0 255.255.255.0 192.168.40.0 255.255.255.0
    access-list OutToIn permit ip any any
    access-list outbound permit ip any any
    (NOTE: I had many more entries in the access list but removed them. Even with the above two allowing everything it does not work)
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside xxx.xxx.xxx.xxx 255.255.255.248
    ip address inside 192.168.40.2 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    ip local pool vpn_client_pool 192.168.40.25-192.168.40.30
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    I had this statement missing from the previous posted config but even with the nat (inside) 0 access-list no_nat_inside  it still does not work.
    nat (inside) 0 access-list no_nat_inside
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    access-group acl_outside_in in interface outside
    access-group outbound in interface inside
    route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
    timeout xlate 3:00:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server RADIUS protocol radius
    aaa-server LOCAL protocol local
    http server enable
    http 192.168.40.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community $XXXXXX$
    no snmp-server enable traps
    floodguard enable
    sysopt connection permit-ipsec
    crypto ipsec transform-set 3des_strong esp-3des esp-sha-hmac
    crypto dynamic-map clientmap 50 set transform-set 3des_strong
    crypto map vpn 50 ipsec-isakmp dynamic clientmap
    crypto map vpn client configuration address initiate
    crypto map vpn client configuration address respond
    crypto map vpn client authentication LOCAL
    crypto map vpn interface outside
    isakmp enable outside
    isakmp identity address
    isakmp client configuration address-pool local vpn_client_pool outside
    isakmp nat-traversal 20
    isakmp policy 10 authentication pre-share
    isakmp policy 10 encryption 3des
    isakmp policy 10 hash sha
    isakmp policy 10 group 2
    isakmp policy 10 lifetime 86400
    vpngroup remote-vpn split-tunnel split_tunnel
    vpngroup remote-vpn idle-time 10800
    vpngroup remote-vpn password ANOTHER PASSWORD
    telnet timeout 5
    ssh 0.0.0.0 0.0.0.0 outside
    ssh 192.168.40.0 255.255.255.0 inside
    ssh timeout 30
    console timeout 60
    dhcpd address 192.168.40.100-192.168.40.131 inside
    dhcpd dns xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd enable inside
    username AUSER password PASSWORD privilege 15
    terminal width 80
    ****************** End of config
    I have been searching docs and other people's postings trying to obtain the info to make this work. It appears pretty much boiler plate but I believe my problem is in the natting. I am using a range in the internal network for the VPN pool and I have tried switching this to other networks but this has not helped. Unfortunately I have been unable to get the PDM to work and I believe this is a PC config thing and I did not want to waste the time on it. I read a post where a person using the PDM interface with the same problem (not being able to access the internal network)  was able to go to a section in the VPN wizard and set the Address Exeption Translation. They said they originally set the VPN subnet when they did not have to. Many of the other blogs I read also stated that if the natting is not proper  for the VPN pool- that it will not work but I am confused by the examples. They show as I do the complete range for an access-list called no_nat_inside but I believe it should only have the VPN pool IP range and not the entire network since the others do require natting - not sure if my thought process is correct here. Any help will be greatly apprecaited. Also this morning I just tried a boiler plate example from CISCO and it also did not do what I need for it to do. And I also connect a PC to obtain an IP to see if I can see it - no good. The PC can ping the PIX and viceversa but no one can ping the remote PC that connects via the CISCO Remote VPN client even though it receive an address from the vpnpool. Also include LAN is checked off on the client. This was mentioned in anther post.
    Thank you once again.

    Hi,
    PIX501 is a very very old Cisco firewall that has not been sold for a long time to my understanding. It also doesnt support even close to new software levels.
    If you wanted to replace the PIX501 the corresponding model nowadays would be ASA5505 which is the smallest Cisco ASA firewall with 8 switch port module. There is already a new ASA5500-X Series (while ASA5505 is of the original ASA 5500 Series) but they have not yet introduced a replacing model for this model nor have they stopped selling this unit. I have a couple of them at home. Though naturally they are more expensive than your usual consumer firewalls.
    But if you wanted to replace your PIX firewall then I would probably suggest ASA5505. Naturally you could get some other models too but the cost naturally rises even more. I am not sure at what price these are sold as used.
    I used some PIX501 firewalls at the start of my career but have not used them in ages since ASA5505 is pretty much the firewall model we use when we need a firewall/vpn device for a smaller network/branch site.
    Here is a PDF of the original ASA5500 Series.
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80285492.pdf
    Here is a PDF of the new ASA5500-X Series
    http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/at_a_glance_c45-701635.pdf
    I am afraid that its very hard for me atleast to troubleshoot this especially since I have not seen any outputs yet. Also the very old CLI and lack of GUI (?) make it harder to see what the problem is.
    Could you provide the requested outputs?
    From the PIX after connection test
    show crypto ipsec sa
    Screen captures of the VPN Client routing and statistics sections.
    - Jouni

  • Earphones not working properly

    Hey,
    The earphones on my iPod Nano don't seem to be working well anymore. The left one is a lot quieter then the right one.
    Would I get new ones if I go back to the store? Or not? My iPod is still under warranty.
    Thanks.

    I do not work for apple or anything, but if you are under warranty you should be able to get new ones, free. But i would make sure they are in good.

  • One earphone not working in Macbook pro

    For some reason the audio output on my macbook pro is only working on one earphone. It is not the earphones as I have tried other earphones and the same thing happens. I had a problem recently with the output not working at all...and there was a red light coming out of the headphone jack. But the red light ended up going away on its own...and the sound came back. However...there is still only sound coming out of one earphone.

    Hi again.
    Nice website, except the wma files.
    It is the right workflow to monitor what you mix before sending the material to the mastering studio. Although if you use Logic Pro 8 then you have compressor and can make this mastering by yourself (if you want to).
    I try to say it easy: Without Light you can't paint, without suitable equipment you can't monitor an surround-mix. Only stereo is possible with your hardware. You can mix in surround in logic and listen in stereo. This is not optimal but the only chance to do this without buying an audio interface with minimum 6 outputs.

  • The front row is not working. Remote control not triger,

    Front row is not working, Remote control no response, command-esc not triger as well.
    check keyboard shortcut from system preference, there is no front row.
    anyone know why?

    Ok first try it in another Account.
    1. Open the account system pref window (System Preferences > Accounts)
    2. Click the plus button at the bottom
    3. Specify an account name (ex: test)
    4. Add account
    5. Logout of your current account, and login to the newly created one
    If it works, then something was wrong with your account, move your files to the new account, and delete the old one.
    If it did not work:
    1. Try the reinstall again (DO NOT DO "ARCHIVE AND REINSTALL", as this may keep some file that is hindering FR from operating correctly
    2. Make sure the FR file is in the Core Services Folder (Macintosh HD/System/Library/CoreServices/Front Row.app)
    3. Make sure that you do not have the IR sensor turned off on your computer (System Prefs > Security > Uncheck "Disable Remote Control IR Sensor")
    4. Make sure that your remote is paired (http://docs.info.apple.com/article.html?artnum=302545)
    5. Make sure that the Command + Esc key is setup to respond by opening front row:
    (1) Open system prefs
    (2) Open keyboard & mouse prefs
    (3) Click keyboard shortcuts
    (4) Scroll down until you see front row
    (5) Assign the Command + Esc key if it is not mapped
    6. Finally, if all else fails, call AppleCare while your computer is still under warranty
    Hope this helps,
    Cory

  • Step Over not working with Remote Debugging of Servlets with JRUN

    Platform: JRun 4, JDK 1.4.1, JDev 9.0.3
    using JPDA and copied jpda.jar to JDEV_HOME/java1.2/jre/lib/ext and set path to jar in app server path.
    using debug args: java.args=-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=5000
    ok, I'm able to attach JDeveloper to JRun and remotely debug by jumping from breakpoint to breakpoint but stepover causes JDeveloper to continue execution to completion or to next breakpoint. Any idea why step over does not work? The only way to halt execution during remote debugging is by using breakpoints.
    Thanks in advance for any insight to this issue.

    Hi Bob,
    I think OTN ate the other thread. It says there are 4 replies, but it won't display them. Here's my latest reply.
    I just noticed something interesting from your original message. You say you are using JDK 1.4.1 for the app server (that's good) and you are using JDev 903. But you say you have copied jpda.jar to JDEV_HOME\java1.2. That doesn't make sense because JDev 903 didn't have a java1.2 directory; I think JDev 903 has a jdk directory which contains JDK 1.3 (actually 1.3.1_03 or something like that).
    Also, jpda.jar is really old and the directions for using jpda.jar and for putting jpda\bin on the app server path is really old. Those directions were needed for JDK 1.2 because JPDA was released AFTER the JDK 1.2 was released. Starting with JDK 1.3, jpda is built in and you don't need the jdpa.jar or the jpda\bin, etc.
    All this reminds me that in JDK 1.2, HotSpot had bugs where stepping didn't work!!! I'm almost positive that this is what you are experiencing. Here is my advice:
    1. Make absolutely sure that you are using JDK 1.4.1 (or at least JDK 1.3 or later) for running your app server. Make sure that you are not using JDK 1.2 - you may have modified your app server so that it uses JDEV_HOME\java1.2\bin\java.exe[i]Long postings are being truncated to ~1 kB at this time.

  • Xperia J Earphones Not Working?

    I bought my Xperia J 3days ago, and got the seinheiser MM30i. And i'm having problems with connecting them to my phone. It doesn't worked 100% correct. As i plug and unplug and mess around with the HeadsetIcon App, and it comes to work eventually.I'm returning my earphones tomorrow, if theres no solution. What are the earphones that work 100% on my xperia J ?

    have you try other headphones? are this  headphones CTIA or OMTP, your Xperia J work with CTIA so there are 3 posibilities1) the headphones are not working2) your 3.5mm jack its not working properly3) your headphones are OMTP is Sony spying on users in this forum?http://talk.sonymobile.com/thread/60197Don't forget to mark the Correct Answers & Helpful AnswersUNRELATED topic, if you have some time please check this threadhttp://talk.sonymobile.com/message/244522#244522

Maybe you are looking for