Easy question - hopefully: getting an application to open when starting up

I'm sure I've done this before, but just forgotten - how do I get an application (in this case iChat) to open when I switch on my Mac.
I use a PC at work so get continually confused....

Go to the "Login Items" pane of the "Accounts" System Preference.

Similar Messages

  • I can't get my applications to open to full screen. The apps are opening at about 75% and I cant figure out how to get them to open to the full screen.

    I cant get my applications to open to full screen. The apps are opening up to about 75% and i cant get them to extend to full screen.

    Which applications are you talking about? 
    Example: Browser application - At the bottom right corner of a browser window you will see a small square with 3 diagnal lines.  Place your cursor in that corner to stretch out your window to full screen.  The next time you open your browser app, the window will be full screen.

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • He XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side

    hi experts  ,
    we are using classic scenario (ECC 6.6 & SRM 7.0)
    we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
    but facing issue.
    The XML message is going over to SRM from XI , but getting an application error (Exception)  when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
    error as below
    <SAP:Category>Application</SAP:Category>  
    <SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>  
    <SAP:P1 />  
    <SAP:P2 />  
    <SAP:P3 />  
    <SAP:P4 />  
    <SAP:AdditionalText />  
    <SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>  
    <SAP:Stack>Application has thrown an exception</SAP:Stack>  
    <SAP:Retry>M</SAP:Retry>  
    </SAP:Error>

    Hi Vijay,
    Can you tell us the interface name?
    If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
    You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
    It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
    Let us know if this helps you.
    Regards,
    Mayur

  • I cant get iCloud to open when starting pages

    I cant get iCloud to open when starting pages with MacBook Air.  How can I turn this option on?

    Welcome to the Apple Community.
    That feature is only available in OSX 10.8. You'll need to upgrade or use iCloud.com.

  • How to get the Application perform actions when exits?

    How to get the Application perform actions when user clicks on the "X" icon in the top right hand corner?
    OR
    If i placed an Exit Button.... when actions that i need to use to allow my application to perform a certain action when it exits?
    Thanks

    frame.addWindowListener(new WindowAdapter() {
      public void windowClosing(WindowEvent e) {
        // do your stuff here
    });The WindowListener and WindowEvent can be found in java.awt.event package
    //David

  • How can I tell my computer what applications to open upon start up?

    How can I tell my computer what applications to open upon start up?

    If your Mac is running OS X 10.9 Mavericks.
    Choose Apple menu > System Preferences, then click Users & Groups.
    Select your user account, then click Login Items.
    Do one of the following:
    Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
    If you want to remove an automatic startup item,
    Select the name of the item you want to  from opening automatically, then click Delete below the list on the right.

  • Applications that open on start up?

    How do I choose or deselct applications that open on start up?

    Select the menu item " > System Preferences".  the select the "Users & Groups" (4th row), then authenticate if necessary.  Select the User you want to change, and select the segment "Login Items"... uncheck, or check, as necessary:

  • Easy question hopefully.....

    I have an easy question but am having a mental block. How can I assign the value of 0.05 to restock? What I need to do is return a 5% restocking value added onto the item. Make sense?
    //Type.java
    public class Type extends Office // Start of public subclass Itemtype that stores office items color.
    private String color; //get string name
    private float restock; //get float value of restock
    private float item; //get float value of total items
    public Type(String color,float restock, float item)
    {  // constructor to initialize the fields
    this.color = color;
    this.restock = restock;
    this.item = item;
    public float getRestock()
    return (this.item * this.restock) + (this.item);
    } //end public subclass Type

    Don't crosspost. Too late this time, but don't do it again.

  • Trying to reinstall firefox on a windows 7 machine and I get "The application was unable to start correctly (0xc0000142)"

    In troubleshooting a different issue I uninstalled Firefox. After fixing the other issue I'm tying to re-install Firefox and am getting an error message that says "The application was unable to start correctly (0xc0000142). Click OK to close the application." The title bar of the window says "setup-stub.exe - Application Error." My PC is a Dell Studio 19 All-in-one running Windows 7 Home Premium.

    When I look up that error on Microsoft's forums, I find suggestions ranging from an incompatible update/hotfix to malware...
    * [http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-application-is-unable-to-start-correctly/bbb9c037-77b3-4fae-93b9-ded70f7f9a17 the application is unable to start correctly 0xc0000005 after windows - Microsoft Community]
    * [http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-application-was-unable-to-start-correctly/84abc6b7-d189-4bdf-a93e-a90f06479d9f The application was unable to start correctly (0xc0000005). - Microsoft Community]
    * [http://answers.microsoft.com/en-us/windows/forum/windows_7-system/the-application-was-unable-to-start-correctly/515b2320-9ad2-4afc-b817-e63bbfe8e134 The application was unable to start correctly (0xc0000005). - Microsoft Community]
    (There are many more along these lines)

  • I lost the tool bar in my email, how do I get it back, and how do you get the link to open when you click on the little chain link symble

    I work on a Dell with Windows XP and Firefox 5, and when I send out an email and try to type a link in the body of the email the link does not open up for the addressee, and I highlight the link and then bold it, and the go to the little chain link symbol and clink on it and no matter how I fill out the boxes it will still not open when they get the email. What do I have to do to get it to work, please help, my email is [email protected] , and the link that I unusually send out is '''[[www.PaidonBillsNow.com |www.PaidonBillsNow.com]]''' now this was different than what is normally comes up, but how do I get this to work, thanks my email is [email protected]

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode

  • HT1222 How do you get Adobe Reader to open when it shows it is downloaded. I have to have PDF!!

    How do you get Adobe Reader to open if it showes it is downloaded, I have tried to open it several ways and nothing happens. I need PDF, HELP!!

    It is showing in downloads that it is there but when I double click on it nothing happens. Nothing at all! It shows the file size and when I look in Spotlight it comes up as the tophit and when I click on it it opens the Adobe Reader icon and shows the file size and I double click and NOTHING happens. I saw in some other posts to use review by Apple. I don't even know where Review is located. I downloaded 10.8.3 last night as it told me to UPDATE. I had 10.8.2. Thanks so much for your reply. Hope you can figure it out, I sure can't!

  • Can't get itunes store to open when on itunes on my computer.

    I have downloaded itunes on my pc for use with my ipod.   Can't get the store to open.  ipod 8 gb.

    I'm having the same issues with window 7 x32 - did all the troubleshooting suggestions and it still doesn't open on my destop computer.

  • Application Error (0xc0000005) when starting iTunes - Please help

    I get the following Application Error message when I try to start iTunes:
    "The application failed to initialize properly (0xc0000005). Click on OK to terminate the application."
    I cannot think of anything that has changed on my PC, but something must have. It may be that this is the first time that I tried to open iTunes after rebooting following the upgrade to 7.2, but I certainly was able to open iTunes 7.2 before rebooting.
    Any help or advice on how to resolve this problem would be greatly appreciated. Thank you.
    Dell Dimesion 8200 Windows XP Pro
      Windows XP Pro  

    Wrong forum. You need the Safari for Windows one: http://discussions.apple.com/forum.jspa?forumID=1188 Post there and close this one out.

  • Getting flashing folder with ? When starting up

    Getting flashing folder with ? When booting up

    The flashing folder with a question mark means that your computer can't recognize the hard drive. This could either mean that your hard drive is dead or it just isn't connected to the actual computer.
    You can first try pressing the option key immediately after pressing the power button to go into startup manager. There you can choose your startup disk. If it still doesn't work (like it didn't for me) you can check to see if the problem is in the hard drive or the cable by inserting the installation dvd and re-install. Go into disk utlility and If it's unmounted, than the hdd most likely dead. If there's no hard drive icon at all, there's a good chance it's the cable.
    Alternatively, you can open up the back, connect the hard drive to a different computer, and test to see if it's working. If it is, than all you only need is a hard drive connector cable ($20-60), but if it isn't then you need to get a new hard drive (about $90~$300)
    Honestly, your best bet is to go to the Apple website and schedule an appointment for the genius bar where they'll do all the testing and replacing. It's actually cheaper (and faster) than doing it yourself because they usually don't charge you for a labour fee, and you don't have to wait or pay for shipping if you're ordering the parts online. I got mine replaced for about $20 and it was done in 10 min. If you're replacing the hard drive though, you may want to take the oppurtunity to upgrade to a better hard drive. Here's a guide on how to replace it yourself: http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Late-2011-Har d-Drive/7656/1

Maybe you are looking for

  • Appending in file and supplying file name at run time using File Adapter

    Hi, Can we use File Adapter to write in a file in append mode. i.e. a BPEL process opening a file appending some text and closing the file each time it called. Another query is can we create the file at run time with the supplied file name?

  • I want some files from zen

    hi all, first of all sorry for my horrible english. i am using gb zen v and last night i delete some files from media folder and its starting not showing album arts. i think this files neccesarry for showing album arts. i have used recovery mode and

  • How to clone RAC Instance to Single Node Instance??

    Hi I have a Multi Node R12.0.4 Installation based on RAC, and i want to clone all the application on Multi Node but on single database. Can any one guide me how to performe this?? Thanks Mohamed

  • FND_FLEX_PLSQL.VALIDATE - Need more clarification

    Hi, I want to use the package FND_FLEX_PLSQL.VALIDATE to validate the SSHR SIT. As per metalink note 295208.1 the parameters that can be passed are 1. Application_id, ID_FLEX_CODE, id_flex_num, number of segments, the user segments etc. This will be

  • How can I display a move on my iPad on Apple TV?

    How can I display a move on my iPad on Apple TV?