Easy to follow blog for learning NWBPM

Hi all
I am new to NWBPM with PO 7.3.1 although I have experience developing on PI and some ccBPM. Over the last 2 days, I have been trying to look for blogs on NWBPM that are easy to follow. Unfortunately, I came up empty. Please share the links if you have any.
Specifically, I am looking for detailed step by step procedure as I don't know much about the subject:) So far, most of the blogs are NWCE oriented. Other NWPBM/PO blogs are rather brief and hard to follow or require third party products like SonicMQ that I don't have. Any blog like the classic interface sync to async bridge that uses soap -> file, for example, that you are aware of?
Thanks in advance,
Jonathan.

Hi ,
refer the below links.
You can find tutorials for SAP NetWeaver BPM here - http://scn.sap.com/docs/DOC-27944 and here - http://scn.sap.com/community/process-orchestration/blog/2012/06/22/sap-netweaver-process-orchestration--an-introduction which you can also find via the main page of the BPM space here http://scn.sap.com/community/bpm
http://scn.sap.com/community/process-orchestration/blog/2012/05/29/user-administration-configuration-requirement-to-add-principals-to-nw-bpm-pool
http://scn.sap.com/community/process-orchestration/blog/2012/06/12/ume-role-required-for-netweaver-bpm-development-and-testing
Regards
srinivas

Similar Messages

Looking for easy to follow guide for building a software updates process.

I am hoping that I can get some general guidance here. I have responsibility for sccm 2012 in our environment. I also have to do exchange 2010, all Cisco networking and a few other large platforms. Needless to say it gets to difficult to get on a task and
stay focused for long periods of time. I tend to just sort of keep things running and that's all I usually have time for.
We have sccm 2012 and it's mostly used for OSD right now. I have been tasked with developing and implementing a process for critical updates across the organization. We have one primary site and three secondaries with about 2500 machines. There is no history
of doing updates here other than a previous person who used to do them via WSUS and GPO. But that has not happened for well over a year now. My problem is that I have no familiarity with doing updates via WSUS or sccm. So it's all pretty new to me. I
got Kent Agerlunds book and like his detailed approach and was hoping to just sort of adopt that process and tailor it to this environment.
I do have WSUS installed in our primary location and the SUP point on our primary and secondary servers. Things seem to be syncing fine. Now I need to try to put together a process that is easy to manage and works. The biggest problem I find is that
given I have primary ownership for a wide range of technologies in a company that is not a small mom and pop organization, it is difficult to sit down and get the necessary time to hammer this out. Everytime I sit down to work on this I feel I have to try
to learn it all over again. For some reason, probably my lack of experience with even WSUS or patching in general, they way this is supposed to work is just not sinking in effectively.
Can someone recommend a decent guide that is easy to understand and easy to follow? I find so much material out there on this topic that it gets a bit overwhelming and I spend what time I do have available jumping from document to document and not really
getting a decent foundation of how this is supposed to work.
Also, if anyone cares to chime in how they would maybe approach this task if assigned to them. Imagine and environment that has no software updates in place and basically never did. Machines are very, very outdated. I have disabled automatic updates via
a GPO ( this was recommended in the Agerlund book).
Also, since this is basically a ground zero environment should I have two focuses? One, just getting everything up to date, and then a second process for keeping things up to date?
I realize this is a really broad info dump that I'm asking for, but I find just googling and trying to figure this out ends up with a scattered bunch of links that I don't really feel help me just get started on the right track.
Thanks!

Hi,
You just need to deploy software updates to specific collections periodically, such as Automatic deployment rules, keep things up to date. Then monitor the status to make sure deployments are successful.
The following KBs describe how to plan software updates.
http://technet.microsoft.com/en-us/library/gg712696.aspx
http://technet.microsoft.com/en-us/library/hh692394.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

(NEED TUTORIAL)Please suggest a good and easy to follow tutorial for Java.

Hello there,
I wish to learn Java. Can some one please suggest me a good and easy to follow tutorial?
I already have the Tutorial provided by sun.
Thankyou,
Satya.

Satya,
Please go to the New to Java Programming Center:
/http://developer.java.sun.com/developer/onlineTraining/new2java/
Just cut and past the link above into your browser.
At the New to Java Center, you'll find lists of beginners materials, articles, tutorials, book recommendations based on your level of experience, a link to subscribe to the new montly email supplement, and more:-)
A particularly good tutorial is Language Essentials:
http://developer.java.sun.com/developer/onlineTraining/JavaIntro/
Enjoy! Dana

HT2488 Is there a way to highlight a lot of folders at the same time to replace underscore between the title words with a space? If it's possible can someone please explain in easy to follow steps for somebody not good with the mac .. Thanks

Is there a way to replace, on a list of folders at the same time, underscore between title words on a folder with a space? If someone has the know how could they please explain in real simple to follow way for somebody not good with Mac .... Thanks

You need a "bulk renamer" to do this.
I personally use ABetterFinderRename, but there are cheaper and some that are free. ABFR has a free trial.
Renamer4Mac is cheap. Check the App Store too.

Has anyone easy to follow diagrams for time capsule networks?

I have a Sky modem (broadband) which is ethernet cable connected to the Apple Time Capsule I would like to have fixed ethernet sockets around the house where I can connect my Mac Book Pro to, and at the same time have hard wired (ethernet cable) connections to the Time capsule,
Questions...
Are the ethernet ports on the back of the Time Capsule ok for the purpose of creating a wired network?
Will the internet still be accessible via Time Capsule.

Yes, it's the internal power supply that fails. There are a couple of threads here on this issue. A bloke in Australia has documented several modifications to the TC power and cooling. I just finished repowering my failed TC and modifying the cooling so it now runs very cool.

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere i

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
Austin Moore
Knoxville, Tennessee

I already have flashplayer on my mac. I have been using online video tutorials for learning, but suddenly all my YouTube vodeos say "plug-in blocked". I follow the instructions for installing or updating, but nothing has helped. I have looked everywhere in Safari help with no success. How can I restore this plug-in, PLEASE?
Austin Moore
Knoxville, Tennessee

Guidance for learning ABAP

Hi All,
Iam working presently in SAP XI. I would like to learn ABAP. Can anyone of u suggest some useful tutorials or material for learning ABAP.Knowledge of ABAP along with XI would be helpful for me.
Thanks
Hemalatha

Hi
go through the links
Start with this.Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
Link for SAP Scripts (step by step procedure)
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Create_A_SAPSCRIPT_Form/How_to_Create_SAPSCRIPT.html
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
ABAP HELP
If you check these links, you can find many example programs.
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sappoint.com/abap/
FAQs in ABAP
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
Smart forms
http://www.sap-basis-abap.com/sapsf001.htm
Workflow
<http://www.sap-img.com/workflow/sap-workflow.htm>
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Mail
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
SAP Scripts:
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapuk.html
Some useful ABAP Links for learning:
http://cma.zdnet.com/book/abap/index.htm
http://www.sapdevelopment.co.uk/
http://www.sap-img.com/
http://juliet.stfx.ca/people/fac/infosys/abap.htm
http://help.sap.com/saphelp_46c/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/d6/0db357494511d182b70000e829fbfe/frameset.htm
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://www.sapgenie.com/abap/example_code.htm
http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://www.sap-img.com/abap-function.htm
http://www.sapgenie.com/abap/code/abap19.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.planetsap.com/Tips_and_Tricks.htm
http://help.sap.com/saphelp_40b/helpdata/ru/d6/0dc169494511d182b70000e829fbfe/applet.htm
http://www.henrikfrank.dk/abapexamples/SapScript/symbols.htm
http://www.henrikfrank.dk/abapexamples/index.html
http://sap.ittoolbox.com/documents/document.asp?i=752
http://members.aol.com/_ht_a/skarkada/sap/
http://sappoint.com/abap/
http://members.tripod.com/abap4/SAP_Functions.html
http://members.ozemail.com.au/~anmari/sap/index.html
http://www.planetsap.com/Userexit_List.htm
http://www.planetsap.com/Tips_and_Tricks.htm
http://www.kabai.com/abaps/q.htm
http://www.planetsap.com/Userexit_List.htm
http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a8090505211d189550000e829fbbd/frameset.htm
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
http://www.sap-basis-abap.com/index.htm
http://help.sap.com/saphelp_40b/helpdata/en/fc/eb2c46358411d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/aa/aeb23789e95378e10000009b38f8cf/frameset.htm
http://www.geocities.com/ResearchTriangle/1635/system.html
http://www.sapdesignguild.org/resources/MiniSG/3_Managing/3_Functions_Table_Control.htm
http://help.sap.com/saphelp_45b/helpdata/en/d1/801bdf454211d189710000e8322d00/content.htm
http://www.sapfans.com/sapfans/repos/saprep.htm
http://www.planetsap.com/howdo_a.htm
http://help.sap.com/saphelp_util464/helpdata/en/69/c2516e4ba111d189750000e8322d00/content.htm
http://www.sapgenie.com/abap/smartforms_detail.htm
http://www.sap-img.com/abap.htm
http://help.sap.com/saphelp_46c/helpdata/en/fc/eb2d67358411d1829f0000e829fbfe/content.htm
http://www.geocities.com/victorav15/sapr3/abap.html
http://www.henrikfrank.dk/abapexamples/SapScript/sapscript.htm
http://abap4.tripod.com/Other_Useful_Tips.html
http://help.sap.com/saphelp_45b/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://www.sap-basis-abap.com/sapmm.htm
http://sap.ittoolbox.com/nav/t.asp?t=303&p=448&h1=303&h2=322&h3=448
http://sapfans.com/
http://cma.zdnet.com/book/abap/ch03/ch03.htm
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://sappoint.com/abap/
http://www.henrikfrank.dk/abapuk.html
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://www.sapgenie.com/abap/index.htm
http://www.sap-img.com/abap.htm
http://www.sapdevelopment.co.uk/tips/tipshome.htm
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
http://sap.ittoolbox.com/nav/t.asp?t=322&p=322&h1=322
http://sap.ittoolbox.com/nav/t.asp?t=448&p=448&h1=448
http://www.thespot4sap.com/
http://www.kabai.com/abaps/q.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sapassist.com/code/d.asp?whichpage=1&pagesize=10&i=10&a=c&o=&t=&q=&qt=
For FAQ
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.sapgenie.com/faq/abap.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
http://www.sapgenie.com/abap/bapi/example.htm
Web log for receive email and processing it through ABAP
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
For Logical database
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/EN/35/2cd77bd7705394e10000009b387c12/frameset.htm
Useful link to websites
http://www.hernangn.com.ar/sap.htm
Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
For posting web log,
/people/sap.user72/blog/2005/06/28/sdn-weblogs-making-it-easier
Dynamic Internal table -web log in sdn
/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table
Smart forms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smart form
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
ALV
http://www.geocities.com/mpioud/Abap_programs.html
Mail
http://www.geocities.com/mpioud/Z_EMAIL_ABAP_REPORT.html
http://www.thespot4sap.com/Articles/SAP_Mail_SO_Object_Send.asp
http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm
BOM Explosion
/people/prakash.singh4/blog/2005/05/15/explode-boms-in-enterprise-portal-using-htmlb-tree--part-1-abap
BOM
http://help.sap.com/saphelp_erp2005/helpdata/en/ea/e9b7234c7211d189520000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/2e4114a61711d2b423006094b9d648/frameset.htm
http://www.sap-img.com/sap-sd/sales-bom-implementation.htm
http://www.sap-basis-abap.com/sappp007.htm
OLE
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
ALVGRID with refresh
http://www.geocities.com/mpioud/Z_DEMO_ALV_REFRESH_BUTTON.html
For language setting and decimal separator
/people/horst.keller/blog/2004/11/16/abap-geek-7-150-babylonian-confusion
Oracle queries
http://sqlzoo.net/
To format SQL
http://www.sqlinform.com/
SCOT settings
http://www.sap-img.com/basis/basis-faq.htm
Status Icon [ALV,Table Control,Tab Strip]
http://www.sapdesignguild.org/resources/MiniSG-old/from_develop/norm_status_icons.htm#positioning_4
ALV Group Heading
http://www.sap-img.com/fu037.htm
For multiMedia
/people/thomas.jung3/blog/2005/05/11/using-classic-activex-controls-in-the-abap-control-framework
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
LSMW
http://www.sap-img.com/sap-data-migration.htm
http://www.sapgenie.com/saptech/lsmw.htm
http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf
http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Word-17643ed1d6d658821_glossary
Here are the two links which contains lots of PDFS:
http://www.easymarketplace.de/online-pdfs-q-s.php
http://www.consolut.de/saphelp/sap_online_help.html
http://www.sap-img.com/
http://www.sappoint.com/
http://www.sapdevelopment.co.uk/
http://www.allsaplinks.com/idoc_search.html
Regards
Anji

Infinite loop error after using Java Sun Tutorial for Learning Swing

I have been attempting to create a GUI following Sun's learning swing by example (example two): http://java.sun.com/docs/books/tutorial/uiswing/learn/example2.html
In particular, the following lines were used almost word-for-word to avoid a non-static method call problem:
SwingApplication app = new SwingApplication();
Component contents = app.createComponents();
frame.getContentPane().add(contents, BorderLayout.CENTER);I believe that I am accidentally creating a new instance of the gui class repeatedly (since it shows new GUI's constantly and then crashes my computer), possibly because I am creating an instance in the main class, but creating another instance in the GUI itself. I am not sure how to avoid this, given that the tutorials I have seen do not deal with having a main class as well as the GUI. I have googled (a nice new verb) this problem and have been through the rest of the swing by example tutorials, although I am sure I am simply missing a website that details this problem. Any pointers on websites to study to avoid this problem would be appreciated.
Thanks for your time-
Danielle
/** GUI for MicroMerger program
* Created July/06 at IARC
*@ author Danielle
package micromerger;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import javax.swing.JFileChooser;
import java.lang.Object;
public class MGui
     private static File inputFile1, inputFile2;
     private static File sfile1, sfile2;
     private static String file1Name, file2Name;
     private String currFile1, currFile2;
     private JButton enterFile1, enterFile2;
     private JLabel enterLabel1, enterLabel2;
     private static MGui app;
     public MGui()
          javax.swing.SwingUtilities.invokeLater(new Runnable()
               public void run()
                    System.out.println("About to run create GUI method");
                    app = new MGui();
                    System.out.println("declared a new MGui....");
                    createAndShowGUI();
     //initialize look and feel of program
     private static void initLookAndFeel() {
        String lookAndFeel = null;
     lookAndFeel = UIManager.getSystemLookAndFeelClassName();
     try
          UIManager.setLookAndFeel(lookAndFeel);
     catch (ClassNotFoundException e) {
                System.err.println("Couldn't find class for specified look and feel:"
                                   + lookAndFeel);
                System.err.println("Did you include the L&F library in the class path?");
                System.err.println("Using the default look and feel.");
            } catch (UnsupportedLookAndFeelException e) {
                System.err.println("Can't use the specified look and feel ("
                                   + lookAndFeel
                                   + ") on this platform.");
                System.err.println("Using the default look and feel.");
            } catch (Exception e) {
                System.err.println("Couldn't get specified look and feel ("
                                   + lookAndFeel
                                   + "), for some reason.");
                System.err.println("Using the default look and feel.");
                e.printStackTrace();
     // Make Components--
     private Component createLeftComponents()
          // Make panel-- grid layout
     JPanel pane = new JPanel(new GridLayout(0,1));
        //Add label
        JLabel welcomeLabel = new JLabel("Welcome to MicroMerger. Please Enter your files.");
        pane.add(welcomeLabel);
     //Add buttons to enter files:
     enterFile1 = new JButton("Please click to enter the first file.");
     enterFile1.addActionListener(new enterFile1Action());
     pane.add(enterFile1);
     enterLabel1 = new JLabel("");
     pane.add(enterLabel1);
     enterFile2 = new JButton("Please click to enter the second file.");
     enterFile2.addActionListener(new enterFile2Action());
     pane.add(enterFile2);
     enterLabel2 = new JLabel("");
     pane.add(enterLabel2);
     return pane;
     /** Make GUI:
     private static void createAndShowGUI()
     System.out.println("Creating a gui...");
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("MicroMerger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     //Add stuff to the frame
     //MGui app = new MGui();
     Component leftContents = app.createLeftComponents();
     frame.getContentPane().add(leftContents, BorderLayout.WEST);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
private class enterFile1Action implements ActionListener
     public void actionPerformed(ActionEvent evt)
          JFileChooser chooser = new JFileChooser();
          int rVal = chooser.showOpenDialog(enterFile1);
          if(rVal == JFileChooser.APPROVE_OPTION)
               inputFile1 = chooser.getSelectedFile();
               PrintWriter outputStream;
               file1Name = inputFile1.getName();
               enterLabel1.setText(file1Name);
private class enterFile2Action implements ActionListener
     public void actionPerformed(ActionEvent evt)
          JFileChooser chooser = new JFileChooser();
          int rVal = chooser.showOpenDialog(enterFile1);
          if(rVal == JFileChooser.APPROVE_OPTION)
               inputFile2 = chooser.getSelectedFile();
               PrintWriter outputStream;
               file2Name = inputFile2.getName();
               enterLabel2.setText(file2Name);
} // end classAnd now the main class:
* Main.java
* Created on June 13, 2006, 2:29 PM
* @author Danielle
package micromerger;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class Main
    /** Creates a new instance of Main */
    public Main()
     * @param args the command line arguments
    public static void main(String[] args)
        MGui mainScreen = new MGui();
        //mainScreen.setVisible(true);
        /**Starting to get file choices and moving them into GPR Handler:
         System.out.println("into main method");
     String file1Name = new String("");
         file1Name = MGui.get1Name();
     System.out.println("good so far- have MGui.get1Name()");
    }// end main(String[] args)
}// end class Main

um, yeah, you definitely have a recursion problem, that's going to create an infinite loop. you will eventually end up an out of memory error, if you don't first get the OS telling you you have too many windows. interestingly, because you are deferring execution, you won't get a stack overflow error, which you expect in an infinite recursion.
lets examine why this is happening:
in main, you call new MGui().
new MGui() creates a runnable object which will be run on the event dispatch thread. That method ALSO calls new MGui(), which in turn ALSO creates a new object which will be run on the event dispatch thead. That obejct ALSO calls new MGui(), which ...
well, hopefully you get the picture.
you should never unconditionally call a method from within itself. that code that you have put in the constructor for MGui should REALLY be in the main method, and the first time you create the MGui in the main method as it currently exists is unnecessary.
here's what you do: get rid of the MGui constructor altogether. since it is the implicit constructor anyway, if it doesn't do anything, you don't need to provide it.
now, your main method should actually look like this:
public static void main( String [] args ) {
SwingUtilities.invokeLater( new Runnable() {
    public void run() {
      MGui app = new MGui();
      app.createAndShowGUI();
}// end mainyou could also declare app and call the constructor before creating the Runnable, as many prefer, because you would have access to it from outside of the Runnable object. The catch there, though, is that app would need to be declared final.
- Adam

What's your strategy for learning Java technologies?

Or, in other words, how do YOU acquire knowledge that is necessary for implementing Java technologies?
After having spent one-and-a-half years developing an enterprise app, I've gained lots of knowledge about Java and some surface knowledge about its related technologies (JBoss, Hibernate, Ant, XDoclet, NetBeans and probably some others I can't think of at the moment).
I'm now realizing that -- although the standalone prototype version of my program is growing mature -- I've still got lots to learn for refactoring it to a web platform. For example, I 've done small test projects using Servlets, but haven't done any work with JSP (or HTML for that matter) yet.
Now, I'm sure I can learn JSP etc., but the questions I ask myself are: how long will it take?
It's a rhetorical question of course (I don't expect an answer from you, the reader) However, it's an important issue because the months or years I spend fumbling around learning these new technologies, are time I could otherwise spend on the business logic and functionality of my program.
So, how do you guys acquire knowledge of technologies? Official training perhaps? Or do you simply experiment until it works? Or do you rely on your company's knowledge base (e.g. someone in your company knows how it works)? Or do you get prototypes built from someone who already knows how it works?
I�m really curious about this and would appreciate your thoughts.
Thanks in advance,
P

Well, it seems like most of you simply read the
various texts and try the vendors' examples. I'm
surprised that no one mentioned ever having bought a
prototype application from the onset. "bought"? What's that mean? You don't buy prototypes. You download evaluation versions, maybe.
I try to find sample code and tweak it to see the effects. Otherwise, I start writing small sample code an build on that.
I consider myself a reasonably competent core Java
programmer, but I had serious difficulty configuring
and merging its related technologies. There were so
many disjointed pieces of instructional information
that the additional research time really hurt our
budget severely. Not an uncommon thing, I'm sure. There's a lot of stuff. But don't bother learning all of it. Not in detail, at least. It's a good idea to familiarize yourself with the names of packages/libraries and what they do. But only really learn what you need to learn for what you need to do. The next project you will probably need other things, so you learn them then.
bsampieri,
I've setup Tomcat and tried the examples--in fact, I
normally follow tutorials for all products I hope to
use. Problem is, the examples and tutorials never
address my specific needs. So, I usually inch toward
my goal by spending weeks or months in forums to
continue where the tutorials leave off. Anything complex is going to not be there.... the trick is to identify pieces that you can pull out to build more complex apps. And the fact that JSP/servlets have the issue of being compounded by all the HTML/CSS/JS and HTTP protocol ... I don't want to say limitiations, exactly... Well, it just makes things more complex and harder to know what you need.
Perhaps you guys are much faster and smarter than
I...or you have a much bigger budget :)Probably not... on either account.

Hi, im a beginner in ADF and JDeveloper. Can anyone suggest me any video links for learning Oracle ADF?

Hi, im a beginner in ADF and JDeveloper. Can anyone suggest me any video links for learning Oracle ADF?
Thanks,
Vijay

Refer the below link as a starting point.
https://blogs.oracle.com/shay/entry/how_do_i_start_learning_oracle_adf_and_jdeveloper
http://sameh-nassar.blogspot.com.au/2010/04/main-references-to-learn-oracle-adf.html
Cheers
AJ

Installing Apps for learning purpose

I want to install Oracle Apps for learning purpose and I have few questions:
1. What version is preferred 11i or 12?
2. What operating system should I use?
3. Where can I find the installation?
4. Could I install it for learning without purchasing a license?
Thank you.

1. What should I download for starting? I understand that all the rapid install disks, is it right?If you select "Oracle® Applications 11i Release 10.2 Media Pack for Microsoft Windows" then you need to download all the zip files belonging to the following parts:
- Rapid Install Start Here
- Rapid Install RDBMS
- Rapid Install Databases
- Rapid Install Tools
- Rapid Install APPL_TOP
In addition, if you wish to install any language other than American English, download the Rapid Install NLS Disks for the corresponding languages.
2. What is the use of each part? For example there are three Databases disks.You need to use all the disks mentioned above. Each set will be used to install a component like Oracle Database technology stack, APPL_TOP, Oracle Applications technology stack .. etc
3. Is the demo company (VISION) included in the files? Yes. At the time of the installation you can select to install either a production/test database or a vision demo database, all are included in the same media kit.

How to download Primavera for learning purpose ? - for Oracle Employees

I am planning to learn Primavera - Project Scheduling, Management, Earned Value Management etc.
Is there any portal for employees to download Primavera for learning purpose? If yes, please provide the link.
Also please provide the link of useful training materials and self study documents etc on Primavera.
Thanks in Advance.
--RK

In order to clarify any details regarding your licenses please contact the local Oracle Partner Business Center at one of the following contacts
Email     [email protected]
Phone 1.800.323.7355
Hours of Operation: 6:30 am (PST) - 6:00: pm (PST) Monday to Friday excluding public holidays.
More details are also available in the note:
Who to Contact for Sales and New License Inquiries or Purchase New Product Inquiries (Doc ID 1226624.1)

Need guidelines for learning APO!

Hi ,
i am interested to learn APO!
i have knowledge of SAP BW.
so cud u plz explain me from where to start to learn APO?
is BW knowledge is enough for learning APO?
is it possible to learn the course on our own?
it wud be greatly appreciated if u cud provide me any links or documents that wud help me in this regard to the following id!
[email protected]
Thanks,
Ravi

Hi Ravi,
Please check this SAP standard documentation:
SCM 4.0:
http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1:
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0:
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
Hope this will help to start with.
Regards,
Siva.
Please reward points if helpful.

Oracle EB Tax - 404 Not found for Learn more Topic.

Hi,
We are facing following errors on Learn more topics page. If someone could please help or give some direction that would be great. Thanks.
I am getting following error by following bullet points
Login to Oracle EBS
Click TaxManagers
Under Tax Configuration Heading click Tax Regimes or Taxes or Tax Statues
On right side it gives you definition for Regimes/Taxes/Tax Statues and there is link "Learn More"
When I Click Learn More and following error occurs.
404 Not Found
Resource /OA_HTML/@ZX_TAX_SEARCH not found on this server

Hi
I found this information on EBS website. It seems patch was applied on 31-MARCH-2009. Any input on this?
Patch Name
Patch Description
Merged Patches
APPL_TOP Name
Language
Completion Date
Details
6746000.R12
12.1.1 iHelp Upgrade Driver - ONLINE HELP FOR ORACLE APPLICATIONS RELEASE 12
No
ap6002bld
US
31-Mar-2009 23:40:45

Blogs for Product Cost Planning (CO-PC-PCP)

The intent of this thread is to collect the relevant blogs in CO-PC-PCP are
1. How to Configure Mixed Costing
/people/young.sun/blog/2010/05/17/how-to-configure-mixed-costing
2. Currency translation when calculating price from purchasing info record
Blogs for Product Cost Planning (CO-PC-PCP)
Edited by: Young Sun on Oct 7, 2010 7:50 AM

Hi,
Followings are the steps for configure the mixed costing in sap
A. Create a Procurement Altternative in CK91N for each of the 4 prod version... Choose process category = Production in CK91N
B. 1 Now, create a mix cost ratio for each of these 4 proc alternative in CK94....
B.2 To maintain a mix ratio in CK94, you need to maintain Qty Structure Type.. Follow the below steps
create a Qty Structure Type in IMG - Controlling > Product Cost Controlling > Product Cost Planning > Selected Functions in Material Costing > Mixed Costing
> Define Quantity Structure Types - Define Qty Str Type here and assign it in the next step
> Define Costing Versions - Assign Qty Str Type to your costing version 1 and Costing Type
C. Now run CK11N.. Your std cost will be a weighted average of all the 4 prod versions... And target cost in production order will be based on the prod version used in prod order
Regards
Ashok verma

Easy to follow blog for learning NWBPM

Similar Messages

Maybe you are looking for