EasyDMS 7 - Error in search / find function

Hi Folks,
When I click the "find document" button EasyDMS 7 the find dialog box does not display the classification and object links tabs. It also does not show a drop down for document type. Once I enter a search term and click OK, I get the following 2 error prompts.
1. Function BAPI_DOCUMENT_GETMULTIDETAIL does not exist!
2. Unspecified error
Wondering if anybody else bumped into the same issue. My version is 7.0.3.1: (Unicode)
Thanks,
Lashan

Hi,
There was a bug in earlier versions of easydms that if you rest rfc cache from the "traces' dialog box, the reset was not proper. In that case you need to reset from "preferences". This is fixed with current sp's of easydms. hope this helps!
Thanks,
Jomerce

Similar Messages

How to use search/find function in a whole book?

Hi,
New to indesign... working on a book file which comprises 25 chapters.
I'd like to do a final proof to ensure all double spaces have gone, all quote marks are right etc
Instead of opening each chapter and using "search/find" through each chapter, can i tell the "search/find" function through the whole book?
Appreciate any feedback
Thanks heaps

Apparently Adobe thought that would be more appreciated than a book-wide Search/Replace.
You can read all about CS5's new features, and their selection procedure, on http://indesignsecrets.com/michael-ninness-answers-indesign-cs5-critics.php. The "Book" feature doesn't even get mentioned under "Sorry, we didn't change that at all." Also make sure to read the comments -- it seems lots of people really want more book features.
If you're one of them (so it seems), you might want to pay a visit to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How do I export a .dwg file so the Search/Find function can be used on it?

I have some .dwg files that my co-worker exported to PDF. It is crucial for me to have the ability to use the search or "Find" function in Reader. There are 11 different .dwg files exported into an 11 page PDF, but some of the were exported with different properties. I can search on 4 of them, but the other 7 are unsearchable. I believe my co-worker user Autodesk TrueView to export the .dwg files to PDF. So my question is what program I should use (I believe that TrueView is capable of what I am trying to do, but I'm not sure) and how should I set up the the settings before I export it to PDF. Thanks.

You need to contact Autodesk, almost no one here is likely to be familiar with what Autodesk can or cannot do.

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

Question: search/find function and markers?

FCPv1 through 7 user, now being forced to decide between Avid and Premiere, so I have tons of questions, but I will start with this:
I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
I am hoping I am just missing something and you guys can help clear it up for me.
Here is my workflow incase it will help answer the question:
I have a video clip, and I have to transcribe every single line of dialogue in the clip.
I need to be able to search these dialogue lines.
Boris soundbite does not work for this, as I need to see what is said, not find where certain things are said.
Using subclips was my original Final Cut Pro work flow, but premiere handles subclips differently, and match framing only matches back to subclips, and not source material like I need it to. Unless of course there's a setting that makes subclips match frame to source material that I am missing, I dug around and looked for one but didn't see anything.
Thanks.

StevenPhares wrote:
I need to search through my marker comments, but I notice the find function doesn't work while in the marker tab, nor does it give options to search through marker comments while in the project tab. Is this possible?
It was also be preferable that it brings up every instance of the keyword, and not just the next instance, I am not seeing that as an option either...
I am hoping I am just missing something and you guys can help clear it up for me.
Markers in Premiere Pro CS Next will have this functionality. I just checked it out. Sorry that this function was not included in Premiere Pro CS6.

User Defined Function Error - Can't find function

Hi All,
Version: 11.1.1.4
I created a user defined function and added it to one of my BPEL Processes. I can see the function in JDeveloper and can compile the project without issue. We placed the jar file out on the SOA Server following the oracle user defined function examples. After placing the file out on weblogic I was able to successfully deploy the project.
Oracle Deployment Steps:
To deploy user-defined functions to runtime:
1. Copy the user-defined function JAR files to BEA_Home/user_projects/domains/domain_name/lib or a subdirectory of lib. Where domain_name is the name of the Oracle WebLogic Server domain (for example, soainfra).
2. Restart the Oracle WebLogic Server.However, when I try to run the composite application I get the below error. I am not really sure why it can't find the Function? The jar is out on the server and the jar was added to the project?
Error:
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><subLanguageExecutionFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>XPath expression failed to execute. An error occurs while processing the XPath expression; the expression is pnl:GetManager(string(bpws:getVariableData('inputVariable','payload','/client:process/client:input'))). The XPath expression failed to execute; the reason was: Function 'GetManager' not found.. Check the detailed root cause described in the exception message text and verify that the XPath query is correct. </summary></part><part name="code"><code>XPathExecutionError</code></part></subLanguageExecutionFault></bpelFault>Any suggestions would be greatly appreciated!
Thanks,
S
Edited by: Scarpacci on Apr 1, 2011 6:06 AM

try putting the jar location explicitly in weblogic server's classpath i.e. add BEA_Home/user_projects/domains/domain_name/lib to wls classpath and restart server.

ICM Script Editor 'Search' 'Find' function, won't stop. Bug? 8.5.2

Script Editor issue; UCCE 8.5.2
When I use the "Find Nodes" function in script editor, to find a string in 'all active scripts' the results are displayed eventually. Once displayed though, the search immediately begins again, preventing selection of any of the results.
It feels like a bug, & has a huge impact on usability of the search feature. It can also occasionally cause scripted.exe to crash.
I think it is likely because there are a large number of scripts in our environment, but there is no way around that right now.
I was considering opening a TAC, but thought there may be simple fix in the wild that someone could share here.
Is there a way to extend the refresh period for the search function? Or can the automatic refresh be disabled entirely?
Appreciate any help, thanks in advance.
Edwin

Were you able to find a fix for this issue or did you ever open a case with TAC? We are having this issue as well it seems along with another problem that recently started where certain updates that are made in CCMP load one at a time instead of as a bulk update in UCCE.
The example I was shown today by two end users was where one did an update of 93 Agent Desktops in CCMP and while viewing the other users Script Editor on an AW the update process to refresh the config within ICM occurred as normal then again and again for guessing around 92 more times in a row which basically stops all work in Script Editor till the config refresh is completed. It looks like it is loading only one update at a time instead of all of them at once. I do not know if this has to do with the type of resource being updated (in this case Agent Desktop settings) or not but it doesn't seem to happen with say Agent moves so far. So for a very large company like ours this can have a huge impact to script updates and configuration changes.
If you can update on how you either resolved this or if a case was opened what the number for the ticket was I can reference that with the support case I will be opening for this.
Thanks in advance!

Search/Find Function in Timeline?

In the project panel there are several different ways to search through all of your media to find specific clips. Is there anything similar for the timeline?
For example - I have a 30 minute sequence with 7 tracks of dialogue. Each clip of dialogue is labeled with a line number from a script. When a producer comes over and asks "Can you quickly go to line 416?"...I'd like to be able to quickly do that.
Avid has a function where you can perform a find in the timeline for specific file names - does Premiere have anything like that? If someone could help me out that would be great!

Peru Bob wrote:
Right click > Reveal in project
Hi Peru Bob,
I believe myhar is looking for a search function for the Timeline. She wants to search for a specific clip name and have the playhead jump to that clip, if I am not mistaken. Reveal in Project is when you know where the item is in the Timeline, but you want to find it back in the Project panel.
Cheers,
Kevin

Problems with the Search/Find function in Reader 10.1.6

I gave in a keyword in a 430 pages dokument (photoshopelements6_help.pdf) and got many search results for different keywords (in bold) but not for my keyword!!

Then it's more than likely a scanned image of text rather than actual text. Unsearchable.
thedge000 wrote:
I did some additional checking and found the unsearchable document does not contain fonts under File > Properties> Fonts.

Could not find Function DisplayTimerMsgImgPopup in DLL

I just upgraded to TS 4.2.1 from 3.1. I created a new sequence, in which, I put a message popup. When I try to run that step, I get the following error: Could not find Function DisplayTimerMsgImgPopup in DLL (or external module) C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Components\NI\StepTypes\MsgBox\msgbox.dll. I used Dependency Walker to examine the DLL in that location and that function does not exist. It seems that since the message popup is a selectable Insert Step type, that function should be part of the base setup distributed in the installation. Why does the Message Popup try to use that function if it is not included in the DLL? Any help would be appreciated.
Thanks,
Tracey

It's there in my 4.2 installation. Perhaps you copied your 3.1 steps to the 4.2 folder? What's the size of the dll and date?

I can't search a song or an artist. i get an error R6025/pure virtual function call. then itunes stops working. PLEASE HELP

I can't search a song or an artist without getting an error R6025 - pure virtual function call. Then itunes stops working. How do I fix it? PLEASE HELP

I have had numerous issues with Itunes 64 bit 11.1.38 (and other previous versions) locking up and crashing upon start with "Itunes has stopped working" or "R6027 pure virtual function call". I have researched the answers around the forums as well as having tried some extensive and repetitious troubleshooting myself and thought I'd list them here... in order of troubleshooting...
1. Install all Windows updates and reboot. This seems to clear issues from time-to-time... I suspect Itunes expects the latest-and-greatest as far as Windows is concerned.. see if this clears your issue.
2. Uninstall all Itunes and Apple products & reboot, remove their directories, remove lingering Itunes registry entries, reboot again, reinstall using "RUN AS ADMINISTRATOR" to install the Itunes executable. See if this allows Itunes to stabilize. Pelase be sure to use the following guide from Apple as far as removing the apps and directories are concerned...
http://support.apple.com/kb/ht1923
3. Remove the contents of the "iphone photo cache" (or other related product photo cache) directory.
4. Try editing the shortcut properties and configure the shortcut (for all users) to run as Administrator.
5. Try editing the shortcut and configure it to run in Compatibility Mode for Windows 7 (for all users).
6. a.Try using MSCONFIG to locate a potential conflicting application or service using the following...
http://support.apple.com/kb/ht2292
or
6. b. Remove the last recent software application(s) you may have installed... in my case removing GREENSHOT http://getgreenshot.org/ stopped my Itunes from crashing on startup and it stabilized after
driving my nuts for weeks.
Message was edited by: DaCheeze

The find function (Ctl+F) , doesn't not expanding the xml file , to search for given search. If the the xml file is expanded , then find function finds the tag and data. How to fix this.

The find function doesn't expanding the xml nodes to search. If the xml is expanded , then find function highlights both matching tag and data. how to fix this.
== This happened ==
Every time Firefox opened

<xsl:value-of select="x"/> produces a string that consists of all text nodes in x.
<xsl:copy-of select="x"/> produces an exact copy of x.
Go to http://www.zvon.org/ for more information like this.

PDF Searching using Adobe Acrobat Plugin Find Function in Safari

I currently incorporate the Adobe Acrobat Pro (9.1.2) plugin for viewing PDF files. I like using Safari for viewing PDFs within a web browser, but I find Safari's built-in Find function (open apple-F) inferior to Acrobat's ability to search for text within the PDF, as it never finds the words that I search for.
My question is: Is there an efficient built-in shortcut within Safari to search text within a PDF using Adobe Acrobat's plugin Find function? If not, is there a relatively easy, keyboard-based shortcut that could be made to direct the Find function to the Adobe Acrobat plugin Find function within Safari?
Thanks,
Ben

Figured it out. It had nothing to do with the software levels of Safari or Adobe Acrobat. Here's the fix:
Open Finder/Applications
Search "Internet Plug-Ins"
Move any Adobe plug-ins to the trash
Quit Safari
Launch Safari
Your pdf document should now render in Print Preview and print properly.

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.

Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!

Is Safari Find function flexible? (Search for inner strings of characters?)

I'm running 10.6.8 with Safari Version 5.1.7 (6534.57.2). I see that when you search a web page using the Safari Find function, you can only search for the beginnings of words, not for character strings within the words. Is it possible to expand the Find function's capability to search for inner strings of characters?

use command F or the edit menus to make the page search box visible - click the magnify/arrow icon at the left side of it - choose "contains" or "starts with".

EasyDMS 7 - Error in search / find function

Similar Messages

Maybe you are looking for