EAX console woes: did not detect required components/audigy2 not detec

After a recent reformat, I go to install the EAX console after the latest drivers (don't have my original CD by the way) aaaand get the "did not detect required components" message.
So I search on it and it doesn't have anything to do with my dri've paths and such. I've tried an Audigy2 and Audigy2 value ISO, but they tell me they don't detect an audigy2... dxdiag tells me differently, however. I'm not in the mood for downloading a bunch more 400 mb ISOs to test them all out either..
I'm at a loss here and really need the EAX console... autoupdate detects my card as "Sound Blaster Audigy 2, DR release .88.20"

nanite2000 wrote:
superidan wrote:
I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
Yes, Creative should be ashamed.
This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
http://forums.creative.com/creativel....id=3964#M3964
If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
I?m not saying that the person who you quoted should not try it though.

Similar Messages

  • EAX console and speakers not work

    MY EAX console and speakers just stopped working today, and i cannot figure out why. I have Logitech speakers, and a Sound Blaster Audigy 4. All the presets in my EAX console(Acoustic, Metal, Bathroom, Theater, ect.) were gone. When I exited out of the console, i noticed my speakers weren't working either. Help?

    tribefan9692 wrote:
    MY EAX console and speakers just stopped working today, and i cannot figure out why. I have Logitech speakers, and a Sound Blaster Audigy 4. All the presets in my EAX console(Acoustic, Metal, Bathroom, Theater, ect.) were gone. When I exited out of the console, i noticed my speakers weren't working either. Help?
    Is your Volume Control icon sitting in the System Tray? If it is bring it up and see if you can launch the EAX console from there.
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • "Setup did not detect required components. Setup will now ex

    Everytime I try to install Creative Surround Mixer version 3.00.57 or Creative Speaker Settings version .00.56, i get this same old error. Ive read about it but most of the posts were from 2005. Is there any known fix for this, I would really like to use these software utilities to optimize my sound quality. Any help is appericated. Thanks.

    The executable should be a zip file with an installer. Try extracting the stuff to a folder and then in the extracted folder go down two levels and run the setup.exe from there ( as opposed to the one in the first directory level ).
    This might not work anymore as Creative may have wised up to the fact that you can install some of their software without having the original installation CD.

  • Aaa authentication serial console LOCAL did not work!!

    Hypertermed in and the console came right up.  Privileged Exec mode does require a password but logging out (disable) requires username and password.
    Also, neither the exec nor MOTD banners work but guess what, they show up upon logout as well ...
    Ponderous, really ponderous.
    ej

    Hello,
    It's an ASA 5505 and I'm currently on ver 8.2(5).  I was on 9.2(2) but reset back to factory default out of frustration. 

  • GCU with console purchase did not add to my account

    I purchased an Xbox one on September 7th to get the Gamer's Club unlocked deal but it was not added to my account. My gamers club unlocked says unlocked through 8/23/2016. It should say unlocked through 8/23/2018. I purchased a year of unlocked for $15 during the old program on 8/23/13 which meant it was good till 8/23/14. Then the new program came out and I was offered a $30 for two years of the service. This made it good till 8/23/2016. On September 7th, which as of this message was more than a week ago, with the purchase of an xbox one, I should have received a free 2 year sub which should have extended my unlocked through 8/23/18. I have the receipt should you need any pertinent information. There is a line on the reciept that says RZGC Unlock which I imagine is the 2 year service.Thank you for your time and please get back to me as soon as possible.

    Hi leylines,
    We're aware of an issue that's currently affecting the listed expiration date of some members' Gamers' Club Unlocked subscriptions. Our My Best Buy team is working on a solution that will correct these renewal dates, and we hope to have a resolution soon. In the meantime, rest assured that your benefits are active and you can take advantage of all your GCU offers at this time.
    Thanks for taking the time to post.
    Aaron|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Can't Get The EAX Consol To Work/App

    I have just managed to get the latest drivers installed for the SB Audiology 2 and I am now trying to install the EAX Consol tools. I.E. The Speaker Settings, Mixer, etc.
    However the files I have downloaded from the site give me the following error:
    Setup Did Not Detect Required Components
    Setup Will Now Exit.
    The Following Files I am trying to install are:
    EAXCONSP0223
    SURMIX030206
    CMSSetup
    SPKSET030206
    Any Help Would be greatly appreciated.
    Note: The SB Audiology 2 card that I have came with my Alienware system, I have tried to install the drivers from alienware and even though they do install when I try to run the consol tools nothing appears. No matter if I sbl click the EAX Consol icon in the toolbar or if I goto the tools via the start menu.

    Password for what?

  • EAX console on audigy 2 platinum

    Hi all i just reformated and installed all the updated drivers for my audigy 2 platinum but now i dont have the EAX console with the mixer and the calibration tool. there is no icon in the desktop tray and when i tried to install the EAX console it says im missing required software and it exits.
    Im on windows xp, i hope creative didnt get rid of all that right now i just have "creative audio console" and it doesnt have an EQ or bass/trebble settings. What should i do?

    I have the same problem on Windows 7 - 64bit...and before also on windows xp 32bit...
    I have installed all the drivers and all the utilities.
    who can help us?

  • Aggregator did not receive statistics from [sb03] for the current view

    I'm receiving a warning message in a BEA Aqualogic Service Bus console "Aggregator did not receive statistics from [sb03, sb05, sb06, sb04, sb02, sb01] for the current view".
    I don´t have any idea what is the root cause of this issue.
    Thanks,
    Norberto Enomoto

    Norberto,
    I've found this link with a list of SB Runtime Messages.
    http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/messages/alsb/kernel/l10n/ServiceDomainMBean.html
    One of this refer to the problem you're having:
    BEA-473051
    Error: Aggregator did not receive statistics from servers for the current view
    Description
         There is a communication failure between Aggregator server and other managed servers. One of the managed servers failed to send statistics to the managed server on which Aggregator is running.
    Cause
         Communication failure between managed servers.
    Action
         Wait for some time and try again.
    Att.
    José Compadre Junior
    Edited by: user10076953 on 22/03/2010 11:09
    Edited by: user10076953 on 22/03/2010 11:09

  • "Setup did not detect the required components. Setup will exit." !?!?!?

    I have a retail Audigy 2. Autoupdate recognizes my card and gives me the available list of drivers and applications for download. I download the following:
    ) Audigy 2 Drivers
    2) Audio Console
    3) EAX Console
    4) Speaker Settings
    5) Surround Mixer
    The ) Drivers and the 2) Audio console installs just fine. However, for each of the three remaining programs (3, 4, & 5 listed above) upon executing the downloaded file they all give me a pop-up window that says:
    ?Setup did not detect the required components. Setup will exit.
    This happens with all three of them. I want to install these because I am of the understanding that one of these contains the ?Speaker channel test? (for lack of a better word) that will test if my speakers are hooked up correctly to the right channels. The ) drivers, and 2) Audio console do not have that test. I created another post concerning this but nobody has replied:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=39825
    I also tried unzipping the three executable files with WinRAR, and then executing the Setup.exe files but it yields the same results.
    Anyone know why I can't install these applications?!?!?!?!
    I swear, I have never had so many problems with a particular brand of product than I have with Creative products?.yet I keep buying them anyway?.sheesh?.Message Edited by Bridgeboy on -30-2005 05:0 PM

    nanite2000 wrote:
    superidan wrote:
    I have retail Audigy 2 card. tryed removing the card and installing on a differant slot. Nothing Works! it produces the same "no audigy 2 card found - setuip will now exit" Creative sould be ashamed thanks
    Yes, Creative should be ashamed.
    This is a known problem that has been around for months and they have failed to address, just like many other problems with their soundcards. For the solution to this particular problem, look here:
    http://forums.creative.com/creativel....id=3964#M3964
    If you would reread my original post in this thread, that solution did not work for this particular problem of mine. I have a SoundBlaster Li've! Card that this solution worked for, however it does not work of the Audigy 2 card?unzipping the files with WinRar and then running the Setup.exe files produces the same result?setup does not recognize the required components and will close.
    I?m not saying that the person who you quoted should not try it though.

  • [FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

    PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
    SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
    [color="#ff0000"]st way: Kill your whole system, by doing format C:
    [color="#800000">2nd way: Follow this advice from Shag:
    [color="#800000">?
    [color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
    () Uninstall software and drivers either, through control panel or the installation CD
    (2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
    [color="#800000">?
    [color="#800000">(3) Manually remove registry entries as follows:
    . Delete the files from "\Creative".
    2. Delete the following registry node from the registry
    - HKLM\Software\Creative Tech\Software Installed
    - HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
    (4) Reinstall the software and drivers.
    Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
    Cheers,
    Diabolius

    BTW just in case people search for the error message in German:
    in German the pop up says:
    "Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

  • AE CS6 won't export MP4. "Some of the required components could not be found."

    After Effects CS6 (from Production Premium) running on 64-bit Windows 7 Enterprise SP1.
    Processor: Intel Core i7-3930K CPU @ 3.20GHz
    AMD Radeon HD 7900 Series video card
    64 Gb Corsair Ram (DDR3)
    Quicktime 7.7.4 Installed
    Currently attempting to export a short (2 second) video based on the predefined "H.264" preset with the only alterations being that I want the VBR 1 Pass to target 3.5Mbs (though I've changed this with no difference in outcome) and I want the video to multiplex as MP4. I immediatley get the error prompt: "Some of the required components could not be found."
    *Just tried using the 3GPP multiplexer and received the same error message. If I try to use the MPEG4 format I get an "unknown exception" error.*
    I've exported literally hundreds of items as H.264 with a MP4 multiplexer on this machine with current hardware and software. And now...no dice. After Effects boots correctly (or at least it seems that way) though I think it takes a little longer than it used to (not sure if the system cache just needs to be rebuilt).
    After Effects CS6 has all available Adobe updates. Quicktime 7.7.4 is also up-to-date. Video Card driver is up-to-date.
    What could be going on? I'd prefer to skip re-installing this program. I've had to do this numerous times already with this suite throughout the past 12 months; really getting sick of the down-time during reinstall. Worth noting that I have closed the program, closed all programs, restarted computer multiple times.
    I am currently going through my Adobe program files for After Effects. I am specifically looking through the 'Support Files' directory. A couple interesting things: 1. My 'MediaIO->Codecs' directory was last updated on 11/8/2013 (perhaps an AE update??) but each of the files within said directory have a last modified date of late September. Did something get wrongfully deleted in the hypothetical update? 2. In 'Media Core plugins->Common' I again have a last modified date of 11/8/2013, but again each of my files within the common directory were last modified late September. I have many expected .prm files but NO ImporterMPEG4.prm; should I have a MPEG4 specific importer file, or does the MPEG importer file do all of the work. Also, I have no ExporterMP4 (or anything of the MPEG, MPEG2, MPEG4 flavor). Should I have one of these?
    Don't know if this last paragraph helps at all but my fingers are crossed.

    Thanks Katrina for all your help.
    I talked to an Apple tech support person. Actually, my call had to be elevated to the next support level. Joy. You are correct, there are multiple listings of the files in the error report even though there is only one copy.
    The support person had me do a few things. Here is what eventually seems to fix things:
    1) For the mp3's that DID copy but were listed as not found... Some files were duplicated so deleting the duplicate with the "!" was an easy fix. I found one file that I could search by song name in iTunes but could not find it by song name search on the iPod. Looking at the iPod playlist I found the file listed by the filename (not song name) and the file played fine. Then in iTunes I double clicked on the song name ("!" showing) and selected locate. I then pointed to the location on the NAS. Resync and now the name of the song on the iPod changed from filename to song name. The file was no longer listed in the error report.
    2) For the m4a files that didn't sync... the problem songs appeared three times in a search in iTunes. Two of the listings showed the "!" next to the name. I deleted these two for each song that didn't sync and all transferred fine afterward.
    Perhaps there is an issue with ID3 tags since I use filenames more than tags in organization. Still, I would think that iTunes would not get so confused or be a little more friendly with its errors, especially considering how long its been around.
    Thanks again for your help. Looks like I have a manual way to correct this issue.

  • Windows did not detect any networking hardware, Windows 7, New Hard Drive

    Message "Windows did not detect any networking hardware"
    Satellite P505 S8980 Windows 7 Home Premium.
    I replaced the Toshiba 500 GB HD with 500 GB Seagate.
    Device Manager icon for any device with yellow exclamation mark,
    Click on "Update Driver".  Lan eNet details as follows:
    Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    Browse to the folder where the setup program has the driver...
    Message: "The best driver software is already installed."
    (But the yellow exclamation mark still harasses me.)
    --- Go to "Setup new connection" ---
    "Choose a connection option"
    Click on "Connect to the Internet"
    Response: "Windows did not detect networking hardware"
    As near as I can tell, that translates from error 0x8E5E0247
    I have this same error on other yellow exclamation marks respective of what kind of device it is.
    => To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
    Note:
    Same issue (hardware not detected) for Video adapter and Audio.
    I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware.  I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed.  I have uninstalled and reinstalled with same results.
    Solved!
    Go to Solution.

    I'm discovering I am not as well as I thought... running on the  AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
    Review for context: Advanced Function HDD
    Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
    Toshiba supplied Windows-7 System Restore Discs: to factory state
    Then I built the Windows-7 Repair  Disc... used later.
    Hard drive was replaced when it caused SMART warning at every system boot.
    Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
    I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
    That new drive would not boot: "Required source not found"
    Booted My newly created Windows-7 repair disc, and used to to fix startup.
    See images.
    That worked and then the ST9500423AS disc booted.
    Now... next day I discovered Window Update is not working.
    I get message:
    Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
    I ran Microsoft Fixit for updates.  It says it fixed two items.
    I still have the problem.
    The service shows "started"
    Control Panel/ ACTION Center/ Maintenance/ Check for Updates
     "No action needed"
     "Windows Update does not require any action"
    I checked  Update History...
    ... It is empty, else window is vacant... blank.
    Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
    It works!  7 updates to install, including SP1... but I did NOT install them.
    Switch back to the AF drive... Update doesn't work. I am broke again.
    Is this another strange problem caused by the Advance Format issue?
    What to do?
    By the way... I did install an Intel storage Matrix driver  update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
    Carl

  • IOS 6 Gamecenter ID did not require email address. iOS 7 does, how do I sync Game Center on new device

    My kid's have 3 iPod Touch's, 4th gen running iOS 6. We all share one Apple ID for purchases, but they each have their own Game Center ID. iOS6 Game Center DID NOT require an email address to use. Now I have bought them all iPad mini's that are running iOS 7. iOS7 REQUIRES an Apple ID to use. How do I import their Game Center info onto the Mini's?

    Hi Sonnyboy89,
    I am a little unclear as to what you are trying to do with Game Center on the iPads, but you can enter each user’s Apple ID in Game Center on their device using the steps in this article -
    Using Game Center on your Mac or iOS device
    http://support.apple.com/kb/HT4314
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Surface Pro 3 / "Windows did not detect a properly installed network adapter"

    Hi all,
    I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
    since January. Unfortunately, I lost all internet connectivity today.
    The problem started when I noticed the type cover wasn't working (pressing keys on the type
    cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
    was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
    Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
    actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
    Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
    I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
    When it came back on, there were suddenly NO connections available at all. Opening the "Network
    & Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
    Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
    of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
    Thanks for your help...
    Ethan

    Hi Ethan,
    Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
    I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
    Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
    https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
    You can check if you can install the latest firmware package for your device.
    Here is an article to talk about such things:
    Windows 10 January Technical Preview on Surface
    https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
    Regards,
    Alex Zhao
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HT6030 I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Hmmmm.

    I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer.  Tried installing download from MailUpdate & advised the disk did not meet the requirements for update.   Expect it's due to being at 10.9.1.  Mail is still teetering between dysfunctional and non-functional.  Advice?

    I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
    If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
    I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue.

Maybe you are looking for