ECC 6.0 SR3 IDES installation problem

Hi,
We are installing ECC 6.0 SR3 IDES on Solaris 5.10 and Oracle 10g.
The disk space available for sapdata is 270 GB and the RAM of the server is 8 GB.
22 GB of SWAP we have maintained.
The server has 2 physical processors and each processor has 4 cores.
The server is UltraSPARC-T2+.
We are installing only ABAP stack which has 112 jobs for Import ABAP phase.
Initially we had maintained 5 parallel jobs for Import ABAP/R3load.
But then it was giving error for some of the pachkages like e.g.
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(DB) INFO: REPOSRC created #20090115221342
DbSl Trace: Error 18 in stmt_execute() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-18 occurred when executing SQL stmt (parse error offset=0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
  rc = 99, table "REPOSRC"
  (SQL error 18)
  error message returned by DbSl:
ORA-00018: maximum number of sessions exceeded
(DB) INFO: disconnected from DB
Hence first we reduced the no. of parallel jobs to 3, then 2 and then to 1.
With 3 and 2 also it was giving same error; but with 1 job it is proceeding but obviously very slow.
The import phase has 112 jobs to finish and this issue has been pending for more than 5 days now!
Suggest a solution ASAP.
Thanks & Regards,
Tejas

Hi Chandra,
Thanks for the reply.
I have already increased the value of session parameter from 96(default) to 180 and process from 80 to 150.
No. of sessions = 1.2 X No. of processes
Please suggest.
Thanks & Reagrds,
Tejas

Similar Messages

  • ECC 6.0 SR3  Master Installation

    I've downloaded the latest version ERP 6 (SR3), the master installation  BS_2005_SR3_SAP_Installation_Master (DVD label D51033511).
    When execute sapinst the menus for ERP installation only shows the options : RAPID CONFIGURATION and SOFTWARE LIFE CYCLE OPTIONS. Where is the options for install Central system, Distruibuted system or high availability system ?  I cant to find how to begin the installation.
    The last week I've installed ERP 6 SR2 with master installation BS_2005_SR2_SAP_Installation_Master and its working OK.  The same occurs with SRM, SCM, etc on SR3.  Have SAP changed the master installation ?
    Thanks in advance
    Fernando

    If you are installing on Windows 32 bit.
    Go to this menu path,
    SAP ERP 6.0 Support Release 3 --> Software Life Cycle Option > System Copy> Choose your DB engine--> Source System Export >Central System> Database and Central Instance Export
    If your environment offers 'only' 32 bit support, you have to set up your
    IDES ERP 6.0 ECC 6.0 system not as a normal installation but as a system
    copy. And that means, you have to modify your DB-Export-DVDs on disk (see
    description below). The 'System Copy' option allows - due to a missing IDES
    JAVA-AS Export - to install only the ABAP-AS, a 'double stack' system is
    not possible. The standard JAVA AS - if required - has to be installed as a
    separate instance.
    How to prepare the three Export-DVDs for an installation as a System-Copy
    in order to use 32 bit hardware:
    Copy all three DB-Export DVDs to disc. They have the structure
    - DVD1
    EXP1
    DATA
    DB
    - DVD2
    EXP2
    DATA
    DB
    - DVD3
    EXP3
    DATA
    DB
    EXP4 (not relevant)
    EXP11 (not relevant)
    Now move all files from DVD2/EXP2/DATA to DVD1/EXP1/DATA
    Now move all files from DVD3/EXP3/DATA to DVD1/EXP1/DATA
    Now modify file DVD1/EXP1/LABEL.ASC
    Change the text line in the file with an editor from
    SAP:ECC:600SR3:EXPORT(1/11):Installation Export:CDxxxxxxxx_1
    to
    SAP:MIG::EXPORT(1/::*
    Now start sapinst from the Master-DVD with the option:
    SAP ERP 6.0 Support Release 3
    Software Life-Cycle Options
    System Copy
    <Database Software>
    Target System Installation
    29.10.2008 Page 3 of 4
    Note 1244548 - IDES ERP 6.0 ECC 6.0 SR3
    Central System
    Based on AS ABAP
    Central System
    and Next
    This option allows still an installation on 32 bit hardware and/or 32 bit
    operating systems.
    When SAPinst asks for the 'Installation Method' choose
    'Standard System Copy / Migration (load based)'
    When SAPinst asks for the 'Migration Export' choose
    the path to ../DVD1/EXP1'
    The next steps are the same as for the 'normal' installation and described
    in the standard installation guide.
    Edited by: Surapong Surabotsopon on Nov 4, 2008 4:55 AM
    Edited by: Surapong Surabotsopon on Nov 4, 2008 4:56 AM
    Edited by: Surapong Surabotsopon on Nov 4, 2008 5:00 AM

  • IDES installation problem with DDIC password

    Hello everybody,
    After hours of searching and trying..
    I have here a problem during a local installation of IDES ECC 6.0 on Windows Server 2008 with MAXDB. The installation stops in phase 27 of 29 u201Ccheck DDIC passwordu201D - test logon to SAP system failed, with the error message FRF-00007 "Unable to open RFC connection" in sapinst.
    The MMC shows in the process list that the following processes stands oon "green": igswd, mag_Server and disp+work are running. The message of servers connection is OK, acts dialogue queue time is 0.00 sec.
    I have already searched the forum, but I am not able to logon as user SAP* with u201C060. u2026u201D or as user DDIC with the password u201C199. u2026u201D to change the DDIC password to my password set during the installation (transaction -S000 / SU01). The login fails over the MMC as well as over the SAP GUI 7.10. I have tried this on the client 000, 001 and 800. The error message is u201CSAP Logon Failed - connection closed without message (CM_NO_DATA_RECEIVEDu201D). The SAP GUI gets down with "Work process restartet, session terminated".
    What can help to solve the problem? Can it be a problem with the ms loop adaptor? Which static address IP must assign to the loop adaptor? Did i have to update the kernel of the data bank or is this not necessary? Can the information from dev_w help?
    Can this link help me: BI 7.0 Installed but errored out during DDIC password check !!!!!!!
    Thanks in advance
    Lenvy
    Edited by: Lenvy Gee on Sep 6, 2009 2:30 AM
    Edited by: Lenvy Gee on Sep 6, 2009 2:34 AM

    Good Morning everybody,
    I started a next try, the mmc is running on green, the login starts up and......failed.
    So the network setting seems to be correct.
    The log files included following:
    ..........................................(just the last lines).............................
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server BASIS_A23_00 on host BASED (wp 0)
    M  *  ERROR       ThSigHandler: signal
    M  *
    M  *  TIME        Mon Nov 26 08:06:26 2009
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          11
    M  *  MODULE      thxxhead.c
    M  *  LINE        10688
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  ThrSaveSPAFields: save spa fields
    M  Entering ThSetStatError
    M  ThIErrHandle: incomplete previous roll out, do a full roll out
    M  ThRollOut: roll out T17/U25/M0/I0 (level=7, short_roll_out=0)
    M  ThRollOut: call rrol_out (1)
    M  ThRollOut: act roll state = DP_ROLLED_OUT
    M  ThRollOut: roll level <> 0, don't call ab_rollout
    M  ThRollOut: full roll out of U25 M0 I0 (Level 7) ok
    M  ThIErrHandle: prv_action of W0: 0x8
    M  ThCallDbBreak: use db_sqlbreak
    C  CANCEL rejected, because there is no SQL statement active
    M  ThIErrHandle: don't try rollback again
    M  ThIErrHandle: call ThrCoreInfo
    A  TH VERBOSE LEVEL FULL
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
    A  ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
    A  ** RABAX: level LEV_RX_ROLLBACK entered.
    A  ** RABAX: level LEV_RX_ROLLBACK completed.
    A  ** RABAX: level LEV_RX_DB_ALIVE entered.
    A  ** RABAX: level LEV_RX_DB_ALIVE completed.
    A  ** RABAX: level LEV_RX_HOOKS entered.
    A  ** RABAX: level LEV_RX_HOOKS completed.
    A  ** RABAX: level LEV_RX_STANDARD entered.
    A  ** RABAX: level LEV_RX_STANDARD completed.
    A  ** RABAX: level LEV_RX_STOR_VALUES entered.
    A  ** RABAX: level LEV_RX_STOR_VALUES completed.
    A  ** RABAX: level LEV_RX_C_STACK entered.
    A  ** RABAX: level LEV_RX_C_STACK completed.
    A  ** RABAX: level LEV_RX_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
    A  ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
    A  ** RABAX: level LEV_RX_INTERFACES entered.
    A  ** RABAX: level LEV_RX_INTERFACES completed.
    A  ** RABAX: level LEV_RX_GET_MESS entered.
    A  ** RABAX: level LEV_RX_GET_MESS completed.
    A  ** RABAX: level LEV_RX_INIT_SNAP entered.
    A  ** RABAX: level LEV_RX_INIT_SNAP completed.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
    A  ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
    A  ** RABAX: level LEV_RX_WRITE_SNAP entered.
    M  ThContextId: context_id = >0001700020019C010D31F2D5BD12D1714B103838<
    M  ThContextId: context_id_uuid = {29019C01-7F24-F235-BD12-D1714B103838}
    M  ThGetTransId2: got trans id (spa) >29019C017F24F239BD12D1714B103838< (32)
    A  ** RABAX: level LEV_SN_END completed.
    A  ** RABAX: level LEV_RX_SET_ALERT entered.
    A  ** RABAX: level LEV_RX_SET_ALERT completed.
    A  ** RABAX: level LEV_RX_COMMIT entered.
    A  ** RABAX: level LEV_RX_COMMIT completed.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
    A  ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
    A  ** RABAX: level LEV_RX_RESET_PROGS entered.
    A  ** RABAX: level LEV_RX_RESET_PROGS completed.
    A  ** RABAX: level LEV_RX_STDERR entered.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    A  ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    M  RmCleanUpResources3: hdr/tbl/ext_tbl/free/keep = 000000000F67D3C8/0000000000000000/0/0/1
    M  RmCleanUpResources3: no resources registered
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  ** RABAX: end RX_RETURN
    M  ThIErrHandle: ThrCoreInfo o.k.
    M  ThIErrHandle: Entering ThReplyToMsg
    M  ThIErrHandle: Entering ThErrHdlUser
    M  ThErrHdlUser: set th_errno (11)
    M  ThErrHdlUser: save context
    M  ThEmContextDetach2: detach T17/M0 from em memory (em_hdl=0, force=0)
    M  ThEmContextDetach2: reset local em info
    B  Disconnecting from ALL connections:
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       YES YES NO  000 255 255 20401126 080533 BASIS          
    C  Disconnecting from connection 0 ...
    C  Now I'm disconnected from SAP DB
    B  Disconnected from connection 0
    B  statistics db_con_commit (com_total=4, com_tx=0)
    B  statistics db_con_rollback (roll_total=1, roll_tx=0)
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 816) [dpnttool.c   327]
    M  return from clean-up function ...
    and:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        A23
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        2928
    Mon Nov 26 08:03:01 2009
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2928) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Mon Nov 26 08:03:10 2040
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >BASIS_I23_00                            <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000D800050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000D800050
    DpShMCreate: allocated wp_adm at 000000000D802150
    DpShMCreate: allocated tm_adm_list at 000000000D8083A0
    DpShMCreate: allocated tm_adm at 000000000D808400
    DpShMCreate: allocated wp_ca_adm at 000000000DD6C2A0
    DpShMCreate: allocated appc_ca_adm at 000000000DD72060
    DpShMCreate: allocated comm_adm at 000000000DD73FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000DDFAC30
    DpShMCreate: allocated gw_adm at 000000000DDFACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000DDFACE0
    DpShMCreate: allocated wall_adm at 000000000DDFACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 4093MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 4096MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 1023 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1633]
    ***LOG Q0K=> DpMsAttach, mscon ( BASIS) [dpxxdisp.c   11822]
    DpStartStopMsg: send start message (myname is >BASIS_I23_00                            <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Mon Nov 26 08:03:11 2040
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 144
    Release check o.K.
    Mon Nov 26 08:03:17 2040
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    Mon Nov 26 08:04:26 2040
    SoftCancel request for T17 U18 M0 received from IC_MAN
    SoftCancel request for T19 U20 M0 received from IC_MAN
    ERROR => DpWpKill(3092, SIGUSR2) failed [dpxxtool.c   2496]
    Mon Nov 26 08:04:30 2040
    ERROR => DpHdlDeadWp: W0 (pid 3200) died [dpxxdisp.c   14532]
    Mon Nov 26 08:04:31 2040
    ERROR => DpHdlDeadWp: W1 (pid 3220) died [dpxxdisp.c   14532]
    DpHdlDeadWp: restart wp (pid=3092) automatically
    ERROR => DpHdlDeadWp: W3 (pid 3296) died [dpxxdisp.c   14532]
    DpHdlDeadWp: restart wp (pid=3268) automatically
    ERROR => DpHdlDeadWp: W10 (pid 2032) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W15 (pid 3312) died [dpxxdisp.c   14532]
    Mon Nov 26 08:04:45 2040
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
    Mon Nov 26 08:05:10 2040
    ERROR => DpHdlDeadWp: W4 (pid 3260) died [dpxxdisp.c   14532]
    Mon Nov 26 08:05:30 2040
    ERROR => DpHdlDeadWp: W0 (pid 3788) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W1 (pid 2108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W6 (pid 3108) died [dpxxdisp.c   14532]
    ERROR => DpHdlDeadWp: W15 (pid 464) died [dpxxdisp.c   14532]
    Mon Nov 26 08:05:33 2040
    ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c   6971]
    The kernel is not patched. I just (try) to install the kernel files from the sap market place
    IDES download destination. The install kernel file was: 51033508_7 - NW7 SR3 Kernel 7.00 for Windows / LNX X86_X64. I got an update / upgrade file, which is called: 51033508_8 - NW7 SR3 Kernel .... Upg ABAP.
    Can anybody give me an adwise by reading those logfiles? Is the file ok for updating the kernel?
    How do I upgrade the kernel by having no .exe - file?  May the installation go on after patching the kernel?
    Thanks you really much
    Lenvy

  • Chinese language problem in IDES ECC 6.0 SR3

    I just finished the installation of IDES ECC 6.0 SR3, but after i changed zcsa/installed_languages to '1DE' and tried to logon using 'ZH' which stand for chinese, it doesn't work and only show messy codes.
    According to note 1244548:
    "The system already contains more than 20 languages. Use transaction SMLT to check the status and set the system profile parameter zcsa/installed_languages accordingly to use them."
    It should be alright, anything configuation i missed?
    Lin

    Hi ,
         zcsa/installed_languages parameter has to set for each language .We suppose that you set is correctly i.e. code for chinese is 1.Please check it once again .If you feel this code for chinese language is correct then you need to install this language in SMLT tcode.
           Please remember that only english & german language comes as default in SAP .Any language ther than this you have to install it via SMLT tcode.You can find the CD of these languages at marketplace.
           Please dont forget to supplement language after installation of chinese.
        Also as you said in post that you system contains more than 20 languages but your profile contains calue of only three .Please make sure that you set this parameter contaning values for each language.Please use tcode I18n to get the help for same.
    Thanks..
    Mohit
    Edited by: mohit gupta on Mar 5, 2010 11:29 AM

  • ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies

    Hi ,
    My environment is
    AIX 6.1
    oracle 10.2.0.2
    ECC 6.0 SR3
    i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
    instance is not coming up and all the process are starting and and then again die one by one.
    In trace of all wor processess , i can see the error trace as follows:
    PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  ThErrPrivHandle: set th_errno (11)
    M  Entering ThReadDetachMode
    M  *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
    M 
    M  Modeinfo for User T16/M0
    Full trace for work process is
    trc file: "dev_w16", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      00
    M sid        DMB
    M systemid   324 (IBM RS/6000 with AIX)
    M relno      7000
    M patchlevel 0
    M patchno    144
    M intno      20050900
    M make:      single threaded, Unicode, 64 bit, optimized
    M pid        790666
    M
    M 
    M Tue Jan  6 15:41:58 2009
    M  kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c   1281]
    M  ThInit: running on host MBDEVECC
    M  calling db_connect ...
    C  Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
    C  Oracle Client Version: '10.2.0.2.0'
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3's password
    C  Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
    C  Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
    C  Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
    C  Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
    C  Got SAPSR3's password from OPS$-user
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
    C  Now I'm disconnected from ORACLE
    C  Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 0x113701b30 0x11371a068 0x113719918
    C  Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
    C  Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20090106 154158 MBDEVECC       
    M  db_connect o.k.
    M  ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
    I 
    I Tue Jan  6 15:42:00 2009
    I  MtxInit: 16 0 0
    M  SHM_PRES_BUF               (addr: 0x7000000057a0000, size: 4400000)
    M  SHM_ROLL_AREA          (addr: 0x700000140000000, size: 134217728)
    M  SHM_PAGING_AREA          (addr: 0x700000150000000, size: 67108864)
    M  SHM_ROLL_ADM               (addr: 0x700000005bd4000, size: 2672386)
    M  SHM_PAGING_ADM          (addr: 0x700000160000000, size: 656416)
    M  ThCreateNoBuffer          allocated 544152 bytes for 1000 entries at 0x700000170002000
    M  ThCreateNoBuffer          index size: 3000 elems
    M  ThCreateVBAdm          allocated 11776 bytes (50 server) at 0x700000180000000
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 16 initializing ....
    X  Using implementation std
    X  <ES> Info: use normal pages (no huge table support available)
    X  ES initialized.
    B  db_con_shm_ini:  WP_ID = 16, WP_CNT = 17, CON_ID = -1
    B  dbtbxbuf: Buffer TABL  (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
    B  dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
    B  dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
    B  dbexpbuf: Buffer ESM   (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
    B  dbexpbuf: Buffer CUA   (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
    B  dbexpbuf: Buffer OTR   (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
    M  CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    S 
    S Tue Jan  6 15:42:01 2009
    S  *** init spool environment
    S  initialize debug system
    T  Stack direction is downwards.
    T  debug control: prepare exclude for printer trace
    T  new memory block 0x113a30700
    S  spool kernel/ddic check: Ok
    S  using table TSP02FX for frontend printing
    S  1 spool work process(es) found
    S  frontend print via spool service enabled
    S  printer list size is 150
    S  printer type list size is 50
    S  queue size (profile)   = 300
    S  hostspool list size = 3000
    S  option list size is 30
    S      found processing queue enabled
    S  found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
    S  doing lock recovery
    S  setting server cache root
    S  found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
    S    using messages for server info
    S  size of spec char cache entry: 297032 bytes (timeout 100 sec)
    S  size of open spool request entry: 2272 bytes
    S  immediate print option for implicitely closed spool requests is disabled
    A 
    A  -PXA--
    A  PXA INITIALIZATION
    A  PXA: Locked PXA-Semaphore.
    A  System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
    A  Attached to PXA (address 0x7000001e0000000, size 300000K)
    A  abap/pxa = shared unprotect gen_remote
    A  PXA INITIALIZATION FINISHED
    A  -PXA--
    A 
    Signal 6 encountered.
    => 64 bit R/3 Kernel
    => 64 bit AIX Kernel
    => Heap limit      = unlimited
    => Stack limit     = 4294967296
    => Core limit      = 1073741312
    => File size limit = unlimited
    => Heap address  = 0x0x113afcb80
    => Stack address = 0xfffffffffffdd60
    => Stack low     =  0xfffffffffffb470
    => Stack high    =  0xffffffffffff7c0
    => Stack Trace:
         pthread_kill() at 0x9000000005b9450
         praise() at 0x9000000005b8cac
         raise() at 0x90000000002b0f0
         abort() at 0x900000000094528
         ab_init() at 0x1002038d0
         ThrInitRunTime() at 0x1003d1864
         ThStartUp2() at 0x101a9caf0
         ThInit() at 0x1000e9678
         ThStart() at 0x1000fe1b0
         DpMain() at 0x10156c770
         nlsui_main() at 0x101a99998
    => CPU Registers:
         msr = 0xa00000000000d032     iar = 0x09000000005b9450
         ctr = 0xffffffff000000bc      lr = 0xffffffffffffffff
         xer = 0x00000000ffffffff      cr = 0x0000000000585000
         r00 = 0xffffffffffffffff     r01 = 0x0fffffffffffdd60
         r02 = 0xffffffffffffffff     r03 = 0x0000000000000000
         r04 = 0xffffffffffffffff     r05 = 0xffffffffffffffff
         r06 = 0xffffffffffffffff     r07 = 0xffffffffffffffff
         r08 = 0xffffffffffffffff     r09 = 0xffffffffffffffff
         r10 = 0xffffffffffffffff     r11 = 0xffffffffffffffff
         r12 = 0xffffffffffffffff     r13 = 0x0000000112d77bd8
         r14 = 0x0000000110cf5dd8     r15 = 0x0000000110028718
         r16 = 0x0000000110001ee8     r17 = 0x0000000000000000
         r18 = 0x0000000000000000     r19 = 0x0000000110027538
         r20 = 0x0000000110572f50     r21 = 0x0000000110572fb0
         r22 = 0x0000000110572f98     r23 = 0x0000000110572f80
         r24 = 0x0000000110573610     r25 = 0x0000000110000e40
         r26 = 0x00000001105737c0     r27 = 0x0000000101baa950
         r28 = 0x0000000112d6fe50     r29 = 0x0000000000000006
         r30 = 0x0000000000000006     r31 = 0x0000000000000001
    M  ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c      935]
    M  in_ThErrHandle: 1
    M  ThSigHandler: signal (step 1, th_errno 11, action 4)
    M 
    M  Info for wp 16
    M 
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_VB2WP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = 16
    M    mode = 0
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  Modeinfo for User T16/M0
    M 
    M    tm state = 2
    M    uid = 17
    M    term type = 0x2
    M    display = 0x0
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >SAPSYS      <
    M    terminal = >                    <
    M    client = >   <
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    its_plugin = NO
    M    allowCreateMode = YES
    M    blockSoftCanel = NO
    M    session_id = >                                <
    M    ext_session_id = >                                <
    M    imode = 0
    M    mode state = 0x41
    M    mode clean_state = 1
    M    task_type = 0
    M    lastThFc = THFCINVA
    M    lastAction = TH_IACT_NO_ACTION
    M    th_errno = 11
    M    rollout_reason = 0
    M    last_rollout_level = 0
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 8
    M    roll state = 1
    M    abap state = 1
    M    em state = 3
    M    eg state = 1
    M    spa state = 1
    M    enq state = 0
    M    softcancel = 0
    M    cancelInitiator = ?
    M    clean_state = DP_DEFAULT_CLEANING
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    msg_count = 0
    M    tcode = >                    <
    M    last_wp = -1
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 0
    M    act enq infos = 0
    M    em_hyper_hdl = 0x700000030532aa8
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
    M  TrThHookFunc: called for WP dump
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  ThErrPrivHandle: set th_errno (11)
    M  Entering ThReadDetachMode
    M  *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c   10973]
    M 
    M  Modeinfo for User T16/M0
    M 
    M    tm state = 2
    M    uid = 17
    M    term type = 0x2
    M    display = 0x0
    M    cpic_no = 0
    M    cpic_idx = -1
    M    usr = >SAPSYS      <
    M    terminal = >                    <
    M    client = >   <
    M    conversation_ID = >        <
    M    appc_tm_conv_idx = -1
    M    its_plugin = NO
    M    allowCreateMode = YES
    M    blockSoftCanel = NO
    M    session_id = >                                <
    M    ext_session_id = >                                <
    M    imode = 0
    M    mode state = 0x41
    M    mode clean_state = 1
    M    task_type = 0
    M    lastThFc = THFCINVA
    M    lastAction = TH_IACT_NO_ACTION
    M    th_errno = 11
    M    rollout_reason = 0
    M    last_rollout_level = 0
    M    async_receives = 0
    M    cpic_receive = 0
    M    em handle = 8
    M    roll state = 1
    M    abap state = 1
    M    em state = 2
    M    eg state = 1
    M    spa state = 1
    M    enq state = 0
    M    softcancel = 0
    M    cancelInitiator = ?
    M    clean_state = DP_DEFAULT_CLEANING
    M    next hook = T-1/U-1/M255
    M    master hook = T-1/U-1/M255
    M    slave hook = T-1/U-1/M255
    M    debug_tid = 255
    M    debug_mode = 0
    M    mode type = 0x1
    M    debug = 0
    M    msg_count = 0
    M    tcode = >                    <
    M    last_wp = -1
    M    client conversation_ID = >        <
    M    server conversation_ID = >        <
    M    lock = 0
    M    max enq infos = 0
    M    act enq infos = 0
    M    em_hyper_hdl = 0x700000030532aa8
    M    plugin_info = NULL
    M    act_plugin_hdl = -1
    M    act_plugin_no  = 0
    M    max_plugin_no  = 0
    M 
    M  ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c   260]
    Can some one please help me.
    Regards
    Saurabh

    This looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
    Hope that is helpful.
    J. Haynes

  • Installation problems in MSCS ORACLE 10.2 ECC 6.00

    I am writing to report some unexpected installation problems. I am installing SAP ECC 6.00 in a MSCS cluster environment (Windows 2003 / Oracle 10.2) in our production environment and I am having problems during the installing the central instance phase. The sapinst_dev shows the following error: “CJS-30102  Checking the database for installation type failed”, Also the jsourcecheck.log shows  the following error: “com. sap. engine. frame. core. configuration. Configuration Exception: Error while connecting to DB” and  “java. sql. SQLException: Excepción de E/S: The Network Adapter could not establish the connection     at oracle. jdbc.driver.  DatabaseError. throwSqlException (DatabaseError.java:112)”
    The database is currently running without any problem and all the services (SAP and Oracle) as well.
    Following the installation guide, I performed the almost all the steps successfully:
    •     Oracle RDBMS, patches and Oracle fail safe software on both nodes (successfully)
    •     Install the central services instance for ABAP (ASCS) on the first MSCS node (successfully)
    •     Install the central services instance (SCS) on the first MSCS node (successfully)
    •     Cluster the first MSCS node (successfully)
    •     Install the database instance on the first MSCS node (successfully)
    •     Cluster the additional MSCS node (successfully)
    •     Install an enqueue replication server(successfully)
    •     Perform additional steps for the Oracle Fail Safe configuration (successfully)
    •     Create the Oracle Fail Safe group (successfully)
    •     Set up as shared database directory in your Oracle Home (successfully)
    •     Add the Oracle database resource to the Fail Safe group (successfully)
    •     install the central instance (Failed)
    •     install at least one dialog instance (not installed yet)
    As you can observe, I have performed the create oracle fail safe group activity first and then the install the central instance later. Reading the sap note 967121 today, I just realized that there is a wrong installation sequence; the sap note 967121 (actualized date: 17/OCT/07 ) says that “you must install the central instance before you create the Oracle Fail Safe group”.  Is this sequence compulsory? Or can I continue the installation process?
    If this sequence is compulsory do I have to reinstall all the predecessor activities or should I undo just the create oracle fail safe group activity?
    Please let me know if the error which is showed in the installation of the central instance phase is because the wrong sequence or it is due to another reason.
    Our cluster configuration is:
    4 network card
    Public network cards:
    Ip:192.168.2.240 (hostname: ccaribe3rp1, Node A)
    Ip: 192.168.2.241 (hostname: ccariber3p2, node B)
    Private network cards:
    Ip: 10.10.10.1 (hostname: ccaribe3rp1.ceramicascaribe.com, node A
    Ip: 10.10.10.2 (hostname: ccaribe3rp2.ceramicascaribe.com, node B
    Clustergroup:
    Cluster group name: SAPPRO
    Cluster group Virtual IP: 192.168.2.239, network name: SAPPRO (subnet mask 255.255.255.0)
    SAP cluster group:
    Sap clustergroup virtual IP: 192.168.2.238, network name: sapgrp (subnet mask 255.255.255.0)
    Database cluster group:
    Database cluster group virtual Ip: 192.168.2.237, network name: dbgrp (subnet mask: 255.255.255.0)
    We have performed the mapping of the host names to the IP addresses on the windows host file already.
    I would be very grateful if someone kindly can help me to solve this problem.
    Best Regards
    Boris Romero

    Hello Boris,
    one of the main problems is that step
    "Create the Oracle Fail Safe group (successfully)"
    cannot be successful because you need to run configtool and change the secure store as described in installation guide. At this stage the configtool does not exists (documentation error for ECC6.0 guide), so the correct sequence is to install CI and cluster the DB, but not vice versa.
    Which stage is the sapinst braking up?
    Is this beginning, middle or end of installation?
    Did you try to run configtool and modify secure store?
    best regards

  • SAP ERP ECC6.0 SR3 EHP4 IDES Installation Questions

    I have downloaded some IDES SR3 EHP4 installation files from SWDC.
    I installed Windows 2003 Server 64 bit, Oracle 10.2.0.4 and Java 1.4 on VMWare. 
    Now I don't know how to proceed from here because I have some doubt.
    1. What Dics Number should I download? Currently I have downloaded  50096277, 51031678,  51036767 UC and Non UC, 51036905, 51036971, 51036972, 51037093, 51037095, 51037622, 51037623.
    2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID. If I installed using different SID will it incur additional hard disk space? What need to be done to install both stack in the same machine with different SID?
    3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?

    Hi,
    1. What Dics Number should I download?
    Please check that you would need the following disk for the installation.
    Installation master DVD, Export DVD for the IDES,Oracle client ,Kernel DVD, database for oracle DVD(RDBMS) and you shall need the Java software component DVD for the installation.
    2. I've seen some post saying ABAP + Java stack cannot be installed in the same SID
    I think you will have to go with the Mcod installation and the SID fo both ABAP and JAVA should be different .
    3. Can anyone provide me a brief installation guide if he successfully installed IDES EHP4 before?
    Go to service market place and you shall find the installation guide for the perticular os and the Db for which you are going for the installation.
    Thanks
    Rishi Abrol

  • SAP ECC 6.0 SR3 Cluster failover not working in windows with DB2 UDB V9.1 F

    Dear Expertise,
    We have installed the SAP ECC 6.0 SR3 High Availability with DB2 UDB V9.1 FP5 in windows cluster environment.
    We have installation following instances on nodes 1 and 2.
    Node 1                                                                               
    DB2 database software                                                                       
    Central service instance for ABAP Installation on Shared drive G:          
    First MCSC node to create a cluster group u201Cpdssapgrpu201D                            
    Database group u201Cpgsdbgrpu201D(Shared Drive)                                                  
    Enqueue replication service                                                                  
    CI (central instance)(local Drive)
    Node 2
    DB2 database software
    Additional cluster node
    Enqueue replication service
    DI(dialog instance)(local Drive)
    I can login into the system using both CI and DI.
    if my SAP Cluster group is moved from one node to another i can still login into the system
    But when my DB2 group is moved from node A to node B my SAP services are getting closed
    and i am getting the message database not found
    so please Guide me as soon as possible Friends.
    Thanks and Regards,
    Ravindra
    Edited by: Ravindra Bade on Mar 6, 2009 10:22 AM

    Hi Ravidra
    Have u solved the probelm I also have the same problem when i move the groups from node1 to node2 manually my 2 servrces 00 and 01 are failed not able to bring up again. If You solve the problem please guide me the solution to solve this.
    THanks in advance

  • License Key Request from SOLMAN VS SMP for SAP ECC 6.0 EPH4 IDES install

    Hi, SDN fellows.
    I have some doubt on the right way/options to request License Key for SAP ECC 6.0 EPH4 IDES.
    Previously, I read that the only way to get license key is to generate it through SAP Solution Manager. If this is the only way, we will have to install Solution Manager just to generate the license  key (we are currently don't have SolMan running in our landscape).
    I also read that I can request license key through http://service.sap.com/licensekey. I checked the link and see that we have the 10 digits installation number for Product: SAP ERP.. Currently there is no system defined for this installation number.
    I went through the first two screens, seems like they have options for SAP ERP 6 --> IDES.
    If I can get a license key from http://service.sap.com/licensekey, do I still need to install Sol. Man. to generate the license key?
    What are the difference the license key generated from Sol. Man. VS the one we request from SMP?
    Thanks,
    KC

    Hi, Vishnu.
    So, now I understand I need two keys: Solution Key and also License key.
    I should obtain Solman key before I start installation , as the SAPinst will ask to enter Solman key before it can proceed to install SAP ECC IDES.
    You said I can obtain Solman key through OSS note. I went in to SMP just now. Navigated to Help& Support --> Report a Product Error --> New Problem Solving Request.
    I selected Customer Number, Product, Instillation # , and enter  * for  System ID. The search result returned no system found. The problem here is we don't really have any system ID defined for SAP ERP IDES since we haven't start installing the system.
    Is that true that I will only see the System ID in OSS Message interface when I submit the System ID for the license key?
    I thought this is a post-installation step to apply for a license key. If I can to do it before the installation, how can I get the 11 character hardware key before installation (assuming I cannot run the SLICENSE TCode and saplikey u2013get command)?
    OR how can I create OSS message to request SolMan key when I don't have a system ID (that already registered for license key) in SMP?
    OR I should just go ahead to install Solution Manager to generate Solman key (during pre-installation), and request for license key in SMP in post-installation?
    Thanks for advise,
    KC

  • Operating system VERSION incompatability while installing SAP ECC 6.0 SR3

    <h3>what is the dump of M.S. SQL SERVER  required for installing SAP ECC 6.0 SR3 ABAP system on WINDOWS SERVER 2008 R2 ENTERPRIZE 6.1 VERSION.</h3>
    we installed the MS sql version: 10.50.1702 (dump number 51039339) on our Operating system version was Windows Server 2008 R2 enterprise (version 6.1) and while we are trying to install sap using SAP INST we got one high priority prerequisites analysis message saying
    <h3> MESAGE "The following operating system versions is supported: windows server 2003(i.e version 5.2) and Windows server 2008(ie 6.0). current oprating version: version 6.1 service pack 0.0"
    Can any one help me what is the problem, Is it the operating system or with the MS SQL server and please tell me what we should do in order to rectify this issue</h3>
    Please also tell me how to check COMPATABILITY between OS, DATABASE and SAP. we have gone through PAM but not able to find. Can any one help me.

    mahesh.boby63 wrote:
    > Why we sholud go for modified kernel DVD procedure on windows server operaating system ?
    It's not about 'windows' server, but for 'windows 2008 R2' server.
    Kernel files included in the 'Installation Media' are by default the old/low patch level not released fully compatible with 'new platforms' like 2008 R2 - which may cause some problems 'during' installation as well.
    So, using modified kernel DVD you get two advantages -
    1. You are able to avoid 'those' problems during installation.
    2. You don't have to go for an explicit kernel upgrade just after the installation.
    Thanks

  • How to Copy a Non-unicode ECC 6.0 SR3 to WIN2008 and MSSQL2008

    Good morning,
    how can I make a homogeneous system copy of my NON-UNICODE ECC 6.0 (Nw 7.0 SR3) to a new machine running Windows  Server 2008 and MSSQL 2008?
    According to OSS note 1152240 to install SR3 on SQL2008 I have to generate and use  a "SR3 modified installation master DVD".
    My problem is that SR3 installation disk doesn't allow non-unicode installations.
    Can I use SR2 installation disk, and modify it the some way I should do with SR3 installation disk?
    Note 1054740 says "SAP products prior to NetWeaver 7.0 SR3 are not supported on Windows Server 2008", but I would
    not run the SR2 system, just perform the installation and copy my "SR3 database" back. This should not be a problem as the
    diference between SR2 and SR3 is at support package level. Is this correct?
    Can the SR2 installation disk be changed in the some way of the SR3 disk, as described on note 1152240, and be used with
    SQL2008?
    Is there any way to move non-unicode ECC 6.0 to WIN2008 + SQL2008?
    Thank you
    Best regards

    Hi,
    If you are copying you can create a NON Unicode system, The installation for NEW systems is only permited for Unicode but if you are using SAPInst for copying your system, then it will ask if you are copying an Unicode system or not and will left it Non Unicode in the Target. So you could copy your system with no problem I´m pretty sure about this because we are running some copies (8 systems) and we have non unicode systems and we are using SR3 master DVD.
    Just do the chages to the master DVD so you could use it on Win2008
    Have a nice day.

  • Installation problem on SUSE 12.1

    Hi
    I'm a Linux beginner and I am trying to install LV on SUSE 12.1
    I've also posted my problems on Lava:
    http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
    The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
     Any ideas?
    Is there a way to debug to see what's going on?
    Cheers,
    Mike
    Solved!
    Go to Solution.

    Hi Mike,
    Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest. 
    Best,
    Dan N
    Applications Engineer
    National Instruments 

  • Lightroom 3.2 Installation Problem on Windows 7 64-bit

    Lightroom 3.2 Installation Problem on Windows 7 64-bit
    I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
    While copying the extracted program files the following error message appears:
    An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
    I found out that other users had the same problem, and couldn't find a solution.
    Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
    Thanks for ideas to solve the problem.

    Thanks for your advice, Mr. McLion.
    I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
    Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

  • Installation problem for Java EE 5 SDK Update 2

    Hi ,
    I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
    http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
    Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
    Thanks in advance.

    For the difference between Java EE and Java SE read here:
    http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
    For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
    http://forum.java.sun.com/thread.jspa?threadID=738559
    Andrea

  • Error While Installing Cluster on Windows ECC 6.0 SR3

    Hi All,
    We are doing ECC SR3 cluster installation with DB2 9.1 on windows 2003 server.
    We have successfully completed ASCS,SCS & First cluster node installation.
    we are getting error while DB2 Instance installation in step ,
    configuring the database for MSCS.
    we have prepared the MSCS.cfg file and while executing the db2mscs utility,
    it is giving error as
    DB21533E An error occurred during the migration of the DB2 instance, rc = "DBI1969".
    MSCS.CFG entries are as follows
    DB2_INSTANCE=DB2EOP
    DB2_LOGON_USERNAME = OIASAPSRV\db2eop
    DB2_LOGON_PASSWORD = oiaeopadm#3
    CLUSTER_NAME=MYCLUSTER
    GROUP_NAME=DB2EOP
    IP_NAME=DB2 192.168.1.12
    IP_ADDRESS=192.168.1.12
    IP_SUBNET=255.255.255.240
    IP_NETWORK=PUBLIC
    NETNAME_NAME=DB2EOP
    NETNAME_VALUE=OIADB
    NETNAME_DEPENDENCY=DB2 192.168.1.12
    DISK_NAME=SAPDATA (R:)
    DISK_NAME=LOG (F:)
    INSTPROF_PATH=F:\db2\db2eop\DB2EOP\db2_software
    please reply

    Hi Nitin,
    make shure:
    INSTPROF_PATH=F:\db2\db2eop\DB2EOP\db2_software
    points to a shared drive!
    DB2 will create the clustered instance there
    Please read the header of the MSCS.CFG file:
    INSTPROF_PATH  This is an alternative way to specify a path on the MSCS disk
                   to contain the DB2 instance directory.  Use this parameter
                   if the DB2MSCS utility is unable to obtain the drive letter
                   of the disk resource.
    regards Siegfried

Maybe you are looking for