ECC 6.0 wants to use smart forms .

Hi Friends,
I have a requirement to generate a PO, I want to use smartforms, As I am new to it I dont know what is the form name and respective driver program. I am using ECC 6.0. please let me know .
Thanks in advance.
Sagar.

Hi,
As a functional consultant, we are not going to do much with the smart forms. The smart forms will be developed by the technical team and it will be attached to the PO output type.
To view the link please follow the following the steps.
1. Execute NACE transaction code
2. Select EF for purchase order
3. Select Output types below the status bar
4. Select output type as NEU, in our system if you customized a output type, you can select that
5. Select Processing routines at the left control panel.
6. Where you can see the Medium of Print output is linked to either form or the smart form.
If it is blank speak with your technical team for assigning the same.
Regards,
RitiG

Similar Messages

How to print different header & item data in new pages using smart forms.

Hi,
In smart forms I am trying to print header data & their item data. But there are more than one header data for a given input.
I want to print all the different header data with their item data in new pages using smart forms. Can any one please help to solve the issue.. Its very urgent for me..
Regards,
Brajesh

Hi
U need to use control break statements to acheive ur requirement.
Regards,
Priya

How to print form into pdf format using smart forms in abap

please let me know how to print form into pdf format using smart forms in abap.
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Hi ,
refer this link
<removed by moderator>
Regards,
Dhina..
Moderator message: please do not reply to questions that violate forum rules.
Edited by: Thomas Zloch on Mar 25, 2011 2:04 PM

Inventory Management- Printing Physical Inventory Document using Smart Form

Scenario: Inventory Management- Printing Physical Inventory Document using Smart Forms
I could found out that there is no standard smart form linked to Transaction MI21(Program-RM07IDRU). There is a sapscript ((INVNET) assigned to this transaction, but my requirement is to assign customized smartform to this transaction.If it is not possible to assign smart form to pgm then is it possible to through enhancement.If yes then let me know the enhancement as there are lot of enhancement in the pgm RM07IDRU.
If you have any solution then kindly mentioned it.
Looking forward for kind help.
Regards
Amit

Check out with your SD guy if the items in billing doc have correct pricing conditions triggered.
From the description it looks like some customizing issue.
Otherwise revert back with the logic how are you trying to get the net value of item.

Transfer Order Printing using smart forms

Hi All
Our requirement is to print Transfer Order ( WM ) for Goods Receipt & Delivery using Smart forms.
Can we change the existing standard format (SAP script ) and use our own form(smart form ) to include some other data & print.
If possible how to replace the SAP script to Smart form.
Request someone could guide in detail.
Thanks in advance.
Samson

Hi
When you create Smartform try to replace it in customizing OMLV. Not sure if it will work as it refers to Sap Scirpt in help description.
It is also possible to write Z program for TO printing and hardcode SmartForm there.
Regards
Mariusz

Hi guru's i want to dovelope smart form how can we give form name for sales

hi guru's i want to dovelope smart form how can we give form name for sales order plz help me ...

Hi,
If u want to assign the form to Standard sales order, The, this form in the NACE.
and the, Run from va02/03.
Reward Points,
Vamsi.

What development/configuration is required to use smart forms?

Hi All,
My Question is,
What Development/configuration is required to use smart forms to implement
electronic workflow with ESS/MSS?

Dear Prabhakar,
Smartforms is exactly the same in ESS too. U just develop it and later just need to attach it to ESS.
Regards,
Deva.

E-Recruiting - Job Posting using smart Forms

Hello,
Iam working on adding some customized content to the Job posting which would be visible to the candidates when doing a job search and applying for jobs.
I have browsed through SAP blogs which have information on using SAP Smart forms for Job posting but never knew how to go about the whole thing.
I would also want to add my client logo and some image files for the Job posting.
Can some one provide insights on how exactly to do that?
P.S --> I found some information on u201CBAdI: Specify Proposal Texts for Postingsu201D on SAP Help but could'nt find any such one in R/3 to work on. We are running version 6.0.
Thanks
G Raj
Edited by: G Raj on Aug 29, 2008 2:45 PM

Hello G Raj,
the BAdI you found is only for providing standard texts in the posting maintainence. If implemented it sets text you use again and again depending on requisition attibutes so the recruiter does not have to type in everything each time.
For the publication smartform, as for any other data overview, you do not change the standard you just replace the standard example by your company one. You start by copying the standard smartform to keep the correct interface (all e-recruiting smartforms are named HRRCF*) and changing to the layout you need. Then you set the smartform in IMG under SAP E-Recruiting -> Technical Settings -> User Interfaces -> Settings for User Interfaces with Business Server Pages (BSP) -> Assign Parameters to Parameter Types.
Best Regards
Roman Weise

How to use smart form for production orders

Hello Experts,
I have a couple of questions about printing out production orders from SAP, from OPK8.
My ABAPer has developed a smart form and I am trying to use the same for the list LG01, i.e. the object list.
Since, there was no place to assign a smart form directly, so the ABAPer has copied the existing print program , defined for my ref. order type and LG01 and assigned the new smart form inside the program. This new program has now been assigned against my ref. ord type, LG01 and all the plants, as seen in screenshot below.
Now, what is happening is that when I give print for my order, a pop-up screen asks for the printer. I give LOCL , check 'print now' and then click on the print preview.
I can see the new form that has been developed and it is alright.
Then, when I click on the back arrow, once again the print pop-up screen appears. Now, when I enter LOCL, print now and click the print preview, then I see another form open up before me. I am assuming that this is some form which was pre-configured in the system, under the section 'Forms', for the same object list LG01.
Do I have to assign the new smart form under the section "Forms' also, for the ref order type and LG01? or the change in the section 'print programs' is enough for the new form to kick in? Please guide me. I tried to but it gave the error that the form is not created in English. Also , my form is a smart form, not a SAPScript or PDF form, so I wonder if that will help at all.
Requirement :- I need to suppress this second form somehow but do not know how to do it. I want that only one form, i.e. my smart form should be printed out when someone gives print from the order.
Let me know if something is not clear.
Regards
P.R

Hi P,
Go a few steps down and remove flags on the documents you don't want to print:
this are just suggestions, they can be changed in your production order, in CO02, menu Order->Settings->List Control.
regards,
Edgar

Want to use Adobe forms departmentally. How many users per license?

How many people can use Adobe Forms per license/how many computers can we download software to?

Adobe FormsCentral is a web-based app so there is nothing to download - you access from the web browser.
Each users who creates forms needs a license of FormsCentral. In a month or so you'll be able to by a team pack (5,10,25) at reduces prices for a larger group who wants to create forms.
Randy

Regarding printing multiple PO using Smart forms

Hi Abap Gurus,
i have to print the multiple purchase order in smart form such that first purchase order number details in first page. second purchase order in second page. how can i acheive this solution. i searched in sdn but not found a proper solution.

hi,
use this function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZTEST_SMARTFORM'
IMPORTING
fm_name = fm_name.
it passes the function module name generated....
then call that function module..
CALL FUNCTION FM_NAME
EXPORTING
control_parameters = wa_control_par
output_options = wa_output_options
IMPORTING
job_output_info = it_otf_data
TABLES
it_nfal = it_nfal_final.

Text formatting in FSCM correspondance using smart-forms

Hi Experts,
We are using FSCM correspondance functionality with smart-forms in our project. As per requirement, we need to have some text in italics and bold. We have used paragraph format/ character format in smart-form to get the same. When we trigger correspondance, print preview looks fine. But, when we receive actual mail with attachment as .PDF of the smart-form, we are not able to get characters in italics. Bold is working for us but, not with font ARIAL. Our requirement is to use ARIAL font only.
If someone has already worked on similar requirement, please share your experience with me. Or please provide some pointers to look for. Any input will be highly appreciable. Thank you in advance.
Gouri.

I'm not sure if SmartForms support the Arial font. You can look for notes on this. Helvetica is almost the same and is supported. So this is what I generally use.
Rob

Using smart forms

hi all,
How to include a smart form into webdynpro abap view?can any one provide me step by step procedure or sample code for this..
Thanks in advance,
Regards,
Anusha

Refer this link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785]
Edited by: Tamilselvan K on Jun 11, 2008 11:12 AM

Unable to print graphics using smart forms

Please some one help in printer settings for graphical printing in smart forms.
Instead of graphic it interprits the graphics as a text and prints text.
please urgent...................help me

hey no worries I got the answer thank you.

Acrobat 9-Want to use single form, not for data collection

I have created a form that I want to give to my employees using Acrobat 9 Pro. The only options I see are to send the files and let them use them to re-submit. I don't need the information back. This is merely a checklist of information that they can keep for themselves for the project they are on. It will be stored on the file server accessable and editable at any time. If I save the form and open it from somewhere else using Adobe Reader, I can fill in the form fine, but if I save it after having changed it, it loses its "Advanced" form functions (mostly checkboxes and textboxes) and I cannot edit the form anymore.
I just want to be able to create a form that can be opened, then "save as" for each employee to save their own copy per job.
Thanks!

... and 7 is using oracle 8.1.7 client.From your sales representative. 8i is no longer available for downloading,because desupported since many years.
Werner

ECC 6.0 wants to use smart forms .

Similar Messages

Maybe you are looking for