ECCS : custom characteristics into standard report selection screen

Hello guys,
I have added a custom characteristic which is also a subasignment to the EC-CS module.
This field now appears into the standard report selection screen as expected.
I want to define this field as a mandatory selection field, do you know if this is possible? (exemple of standard report CX34A)
Thank you in advance for your help
best regards
Pascal.

Hi Thereza,
This field is already flaged
I have found the following solution : create a variant and assign it to the standard transcation with transaction SE93..
Best regards

Similar Messages

Add a custom field in IH01 and IH03 standard report selection screen

Hi All,
I tried to find any implicit enhancement to achieve but am unable to find any. My requirement is to add a check box at Explosion block in the standard selection screen of IH01 and IH03 report. Please help me with enhancement options available to achieve this requirement.
Thanks in Advance.
Thanks,
Manesh.R

Hi Manesh,
I see the below implicit enhancment point provided at the end of report program.
I think we can mention our custom code here, but I doubt whether we can edit or add fields to the standard selction screen block created.
Please try this and share the results with us so that you also would be adding knowledge to others.
I have attached the screen shot at which I am talking about the implicit enhancement.
please let us know in case of any concerns.
Thanks,
Bhaskar

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How to populate f4 values to standard pnp selection screen fields

Hi Experts,
my question is how to populate f4 values to standard pnp selection screen field. i am using LDB PNP for a report , it displays several fields with f4 values, i need to remove all the stadard f4 values and want to place my f4 values in the selection screen

Hi Venkat,
To put ur own values in the F4 help of any field...all u have to do is.
1st fetch all the records that u need to display in F4 help list...in one internal table.
and then use the function module 'F4IF_INT_TABLE_VALUE_REQUEST'
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield =
value_org =
tables
value_tab =
return_tab =
exceptions
parameter_error = 1
no_values_found = 2
others = 3.
where retfield is the field for which u need to give the F4 help.
and valu_tab is the internal table in which u have the list of records to be displayed.
this would do the work...
I dont have the system in front of me...as soon as i have...will try to send a piece of code, to make ur work easy.
Till then hope this helps u...all the best
Regards,
Radhika

How we can add custom field in standard report 2kee.

Hi,
How we can add custom field in standard report 2kee.
I need one extra field to add in 2kee report for the same is there any customization req.
Regards
Ravi

Ravi,
Which extra field do you want to add or see? Without specifying the field, it is difficult for one to tell you precisely whether you need a custom field or just change the layout to get the standard one.
There are so many fields which exists but are not displayed when you execute 2KEE. You need to change the layout selections to your preference.
Nonetheless, if the field you want to add does not already exist, then yes you can do customization. Is there a customization requirement? No. But remember, you are making changes to SAP Standard program which will no longer be supported by SAP should in the case an issue arise in the future related to this very program.
Have your abaper add the said field in the program or why not just create a query to pull the report?
Elias
Edited by: Elias Akorli on Sep 18, 2009 9:02 PM

Table Control on a report selection screen -not a dialog transaction screen

Hi
Does anyone know of a way to have table control functionality on a report selection-screen? The program needs to be able to run as a background job (ie cannot be a dialog transaction) and we need to be able to save variants with the selection-screen values.
Any help would be appreciated.
The key point is we want to allow the user to enter a dynamic number of rows of table data on the selection-screen, save a variant containing that data and execute the program with the variant as a background job.
Thanks
Nicole Knight

Hi Nicole,
The main problem is how to persist the data. If you are not able to create a couple of tables then you could always utilise TVARV instead. On a similar line to my original post you could have the button call a dialog transaction. In here you could do your normal GUI table control. When saving the data simply transpose each column into a separate select-option held on TVARV keyed by the 'variant name' + fieldname. Then retrieve and transpose this back when executing the report.
Other methods could be storing the data in cluster xy (see EXPORT TO DATABASE command).
This seems a bit overkill for what would be a couple of maintenance dialogs.
Cheers,
Pete
PS. The view cluster is just a way of hierarchically performing table maintenance across multiple related tables. It offers a good UI for this purpose (header and item config tables) and is utilised extensively in the IMG.

Unable to Upload data from text file into BEx Analyzer selection screen

Hi,
No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file. I never faced same kind of issue when I am using BEx Analyzer 3.x. Please let me know I have to change any settings related to BEx or any other.
Thanks
Sri Krishna Ponnada.

Hello
It seems you are reaching the .NET memory limitation informed in note 1040454.
Because 3.5 does not use .NET it can work that.
Regards,
Ricardo

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Object text not coming in report selection screen

Hi,
i have an object task type for which text has been loaded.this is included in one reports selection screen.But in F4 only kee is displayed and not text.If check button is pressed text is displayed besides key.Also text doesnt come after report is executed.
please help.
Thanks,
Prasanna N.

Hi Prasanna,
In the Query Designer goto the properties of the required object that you want to display key and text for it, Select the Key and Text Display option. Then you can see in report key and text for that object.
Hope this helps.
Veerendra.

Problen in report selection screen

Hi ,
I had a problem in the report.In the report selection screen user asking to keep page no option.So when they select the page no in the selection screen,so from that page number report out put should display.
how to do this.
Thanks,

If you generating the LIST using the classical approch you cah use the SCROLL LIST keyword for this purpose.
Like:
DATA: L_PAGENO TYPE I.
L_PAGENO = 3.
START-OF-SELECTION.
DO 100 TIMES.
WRITE: / SY-ABCDE.
ENDDO.
SCROLL LIST INDEX 0 TO: PAGE L_PAGENO.
TOP-OF-PAGE.
WRITE: 'Top-of-page'.
Regards,
Naimesh Patel

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

BEx web report selection screen entries retain when closing and opening the report again

Hello all,
please help me in the below query.
Till last month the entries we made in BEx web report selection screen are retained in the selection screen even when we close the web report and open it again from portal without logging off. But recently this functionality is missing and the entries in selection screen are not remembered when we close and open the same report again. It is a good feature for the users. Have you come across this issue?

No...I think i can reframe the question very clearly......For ex: we are opening a Bex Web report...so initally we would be prompted by the variable selection screen...in which we have to give the entries(Values) for those variables like Cal month, Sales org, Company code, etc.....Later on the report will get open based on the values we have given......
Now if we close the particular report without logging off then if i try to open the same report that selected values are missing.....earlier it used to remember the values we have given until we log off....But now that functionality is missing....It was very useful feature.....Can you please tel me what can be done to resolve this??
I hope the explanation would be clear now.

Number of Entries icon should come on report selection screen

Hi,
In my requirement, I want Number of Entries icon on my report selection screen.
Means when i insert the required selection parameter's, then i want to see the total number of entries, which is come after the execution of my report.
Please let me know that how can i do it...
Regards..

HI.
Check the link display number of line items in my report at the title bar
I have extract the part from the above link.
if u want to display the no of line items, as shown in SE16, u create a SET STATUS with a push button with name No of Entries on the report screen.For that status, u write the code as to display no of lines in ur table by using either
DESCRIBE TABLE itab LINES lin.
lin gives the no of line items.
or
select count(*) from vbap.
write sy-dbcnt.
U got require output, when ur pressing No of entries button, then this will display on the output screen.
Thanks and Regards
Sachin Sharma

Assign characteristics to report selection screen in COPA

Hi all,
it seems there are 2 ways to assign characteristics to a selection screen of a COPA report:
1. Go to the form, KE35, double click on a column header and assign characteristics here and check the flag for entering variables. It seems I have to do that for all headers?
2. Goto KE30 - change the report and assign characteristics here and check the flag for entering variables.
What is the difference between those two ways? Where do I need to assign my characteristics? I seem in the 1 option I'd have to do it for all headers?
Thanks
Anne

Hello
Create some authourization checks for the user. Try to check with BASIS team.
Also check if you can default entries for a particular user.
reg

ECCS : custom characteristics into standard report selection screen

Similar Messages

Maybe you are looking for