ECCS - G06020 First consolidation data for unit x in group G2 contains err

Dear Experts,
  When I try to consolidate the investment, I got error message as below:
First consolidation data for unit E in group G2 contains error(s)
Message no. G06020
Diagnosis
Investment or equity data was collected for consolidation unit x for a date that is after the period of first consolidation in consolidation group G2. This makes all activities for this unit ineffective after the first consolidation of those activities. This can also affect indirect activities and organizational changes of other consolidation units.
Procedure
Correct the investment or equity data for consolidation unit x.
Then,  I have no idea how to fix the problem. If i changed the investment or investee's equity, the data validation can not be successful. And from the message is said, the date could be critical, but I don't know, which date is incorrect.
The background information is described as below:
  This is the first consolidation, I have run all tasks of data collection and elimination of AR/AP and Dividends.
  The consolidation is based on purchase method.
Any suggestion will be appreciated.
Flex Yang

How can you solve this problem?, please guide me to solve this problem, i have similar problem, thanks.

Similar Messages

  • How do i able to get data for unit price using RSEG table?

    Dear All,
    How do i able to get data for unit price in RSEG table?

    Hi Thiru,
    Please check the logic in thread http://scn.sap.com/thread/1347964
    Hope this helps.
    Regards,
    Deepak Kori

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Change ECCS Hirarchy & first consolidation

    Dear ALl,
    My Company use ECCS Modul and First Consolidation was done at period 04/2004 and Hirarchy are :
    BIG
    --1000
    --BG
    2000
    BPG
    3000
    4000
    5000
    SG
    6000
    7000
    We have processed consolidation every month until period 08/2007.
    Start on period 09/2007 my company want to change the Hirarchy
    BIG
    --7000
    --BG
    2000
    BPG
    3000
    4000
    5000
    SG
    6000
    1000
    Step by step already we did for the change is :
    1. Closing All modul on period 08/2008
    2. Consolidation Process (sub Sequent) on Period 08/2008
    3. Change Account Master Data and trading partner.
    4. Adjust FI Balance from company 1000 to 7000 on period 08/2007
    5. Adjust FI Balance from company 7000 to 1000 on period 08/2007
    6. Change consolidation Unit (tcode: CX1N)
    7.Change Hirachy (tcode :CX1X & CXM1)
    8.First Consolidation process
    Do the steps wrong? Or do you have other step-by- step process for the change?
    We find various error on first consolidation process.
    One of the problem is transaction with account trading partner posted on period 04/2004 as begining balance not allowed to adjust in FI Modul
    How to Adjust Transaction that have trading partner on ECCS Modul.
    Regard
    JPL

    How can you solve this problem?, please guide me to solve this problem, i have similar problem, thanks.

  • Creation and Change Date for Tcode and Function Groups

    Hello All,
    I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
    regards,
    Mahesh

    Hi,
    TADIR and TRDIR is the tables where you can find all these data
    Regards
    Sudheer

  • Regarding first due date

    Hi,
    How to find first due date for invoice. Anybody has any idea if there is any FM or table i can use to get it? Please let me know.
    Rgds
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Jul 12, 2011 10:41 AM

    Hi,
    This date is calculated either based on the ATP results or after carrying out delivery/transportation scheduling. Please check the stock situation of those materials. If transportation scheduling is active, check the lead time maintained in the determined route as well.
    If you press "F1" in that field you will see how the system react on that field.
    Best regards,
    Rahal.

  • Create min(date) for Customer in BMM layer

    Hi guys,
    I need help in creating a first order date for a customer. I want to do this in BMM layer and use directly in reports.
    How should i create this?
    Any help Appreciated.

    I think its you sent me email with samilar Q.
    If you are doing in BMM you need to understand the schema
    assuming you got fact,day, custmer tables
    and these joined as star.
    you need to create a metric on fact as min(day.date) and set content tab to customer level
    for this you might have to map day dim to fact using fact source properties add day table.
    once you done as I said:
    just pull mindate metric in answers run it and check physical sql that should be like
    select min(date),cust_name from
    fact,day,customer
    where 2 joins goes
    group by cust_name
    Hope this helps, if helps mark

  • Where we can Read first pay date from the Payroll cluster ?

    Hi,
      I need Employee’s first pay date for that plan year.
      If u know plz help me in this.
    with regards,
    Suresh

    Hi there.  Do you mean the first date that the employee was actually paid?  If so, you can use this:
        CALL FUNCTION 'CU_READ_RGDIR'
          EXPORTING
            persnr          = employee_pernr
          TABLES
            in_rgdir        = rgdir
          EXCEPTIONS
            no_record_found = 1
            OTHERS          = 2.
        IF sy-subrc EQ 0.
        Store only active payroll results.
          DELETE rgdir WHERE srtza NE 'A'.                "Active
        Delete all the payroll results not from the requested year
          DELETE rgdir WHERE paydt+0(4) NE pay_year. "Reporting Year
        Delete voided payroll data.
          DELETE rgdir WHERE voidr NE space.              "Voided
        Sort so the first record is the last for the requested year.
          SORT rgdir BY paydt ASCENDING fpend DESCENDING.
          LOOP AT rgdir INTO ws_rgdir
            WHERE paydt > pay_year_begda.
            first_pay = ws_rgdir-paydt.
            EXIT.
          ENDLOOP.
    ENDIF.
    I hope this helps.
    - April King

  • Automatic entry for Common Stock , first consolidation in additional data

    Hi,
    I need to know why, after uploading the notification data, the system automatically populates an entry on the additional notification data for 'Changes in Investee Equity' at the activity "First consolidation". I must tell that there were no previous entries because this is the first consolidation on ECCS.
    But, where is configured which FS Item should the system identify as the one related to the Common Stock? it is detecting the P&L carrying forward FSI instead of the common stock...
    Thanks in advance!
    Rushid

    I finally got the solution by myself. In fact this behaviour is due to the configuration on tx CXJ5 of a combination of a set of FSitems + a set o subitems that are linked to one unique consolidation activity (01-first consolidation,16-horizontal mergers, etc.)
    I hope this will help somebody else in a future.

  • Change of method consolidation  - duable data for investment and equity

    Dear All!
    There are:  investor uniu - company A and investee unit - company B.
    Company A has had 50% share in company B to 01/2010. - Equity Method.
    Company A has added by 50% share in company B to 03/2010. - Puarches Method.
    I use activity of investment in AFD for investment and equity. :
    When I perform task consolidation of investment there is duble data for investment and equity.
    And when I perform task for Change to Consolidation Group I have message Process is not nessecery.
    Mabye you know why is process not nessecery?
    Thank you in advance for your help.
    Best regards,
    anka
    Edited by: Anka on Mar 25, 2011 5:07 PM

    Dear Sir,
    Thank you for your answer.
    Yes, I have task for change in group consolidation with documents in the posting level 02,12,22. I did not  data in group currency, when I task change in group consolidation, but only in local currency. My mistake.
    I have a new question:
    When I purchase new shares, which the activite of investment I must choose in AFD:
    - step aqusition or increase in capitalization?
    Thank you in advance for your help.
    Best regards,
    anka

  • First data entry and First consolidation

    If I start new BCS system, will the Period and year of First data entry be the year and period of First consolidation?
    I thinkt that it is not possible to track the Change of stockholder's equities in subsidiary from REAL starting period of acquition.

    First:
    There is one very important thing to know about "first consolidation period/year":
    Lets say 12/2008
    If you use carry forward, for example with movement type 100, then you are allowed to upload data into 12/2008 on movement type 100 and only then.
    Second:
    You need to assign an accounting technique to the consolidation group change and reporting.
    Check this link:
    [http://help.sap.com/saphelp_sem60ep1/helpdata/en/68/08d54276053258e10000000a155106/content.htm|http://help.sap.com/saphelp_sem60ep1/helpdata/en/68/08d54276053258e10000000a155106/content.htm]
    Have a look at the table what those attributes mean.
    BR

  • BPC - Consolidation - Data Loading - Will BS/PL accounts data ONLY be loaded from ECC?

    Dear All,
    In BPC, when we load data from ECC for Consolidation, my understanding is that we load only BS and PL accounts' data for/by the entity.
    Apart from BS and PL data, will there be any data that will have to be loaded into BPC for consolidation?
    The following three financial statements -
    -Statement of Cash Flow
    -Statement of Changes in Equity
    -Statement of Comprehensive Income
    are actually derived/calculated from the loaded BS and PL data. This is my understanding. Pls. correct me if I am wrong.
    Thank you!
    Regards,
    Peri

    Hi Peri,
    Balance sheet, PL and those three financial statements are derived from BS/ PL accounts, however, there should also be "flow" information.  Otherwise you won't end up with a correct consolidated cash flow or equity movement. ( or you can prefer to enter flow detail manually)
    Second thing is, while getting BS & PL accounts, you will also need trading partner detail, otherwise you won't be able to do the eliminations. (or you can prefer to manually enter trading partner detail for intercompany accounts)
    Thirdly, you should also consider other disclosures. (Depending on what standart you are implementing - IFRS, US GAAP, Local Gaap whatever...)
    Hope this gives an idea.
    Mehmet.

  • Difference in Material availability date for ECC ATP check & for APO ATP check in the same order

    Hi Gurus,
    I have a question: on what basis material availability date is calculated in forward scheduling?
    Eg:
    For a customer GR hours are maintained in unloading point calendar in customer master and Customers are not CIF'ed across to APO.
    GR hours are maintained for weekdays from 8:00 to 12:00 & 1:00 to 6:00.
    In a sales order with two line items with Requested date today & plenty of stock on hand for two products( ECC & APO) where line 10 (product 1) triggers ECC ATP check & line 20 (product 2) triggers APO ATP check at same location (loc1).
    RDD is today, material availability date for ECC ATP check (line 10) is today (working as expected) but where as the material availability date for APO ATP check (line 20)is pushed to next day by which for the same customer there are different delivery dates. And two delivery notes will be created & truck will be on road at different times for the same customer which is unacceptable.
    What am I missing here to get the material availability date as today for forward scheduling? Please guide me on this.
    Thanks,
    Nihar

    Hi Nihar
    Though the logic you mentioned makes sense. I am confused here with the data you have provided:
    UTC day
    UTC time
    CET day
    CET time
    UTC+6 day
    UTC+6 time
    RDD
    30/04
    17:24
    30/04
    7:24
    30/04
    23:24
    MAD
    30/04
    17:24
    30/04
    7:24
    30/04
    23:24
    Lod/GI
    02/05
    17:24
    02/05
    7:24
    02/05
    23:24
    Del
    12/05
    17:24
    12/05
    7:24
    12/05
    23:24
    Del
    13/05
    1:00
    13/05
    3:00
    13/05
    8:00
    Load/GI
    05/05
    1:00
    05/05
    3:00
    05/05
    8:00
    MAD
    02/05
    1:00
    02/05
    3:00
    02/05
    8:00
    In the first row, the difference in RDD in UTC and UTC+6 is 6 hours. However, in the last three rows I can see the difference between UTC time and UTC+6 time is 7 hours. Would you know the reason to this? Also, in the first four rows, CET time = 7:24 which should had been 19:24. Please correct me if I am missing something here.
    Thanks,
    Parth Soneji

  • LC change in Consolidation Unit after first consolidation

    Dear All,
    Comapny A with LC as MUR been tied to consolidation group and consolidation takes place very quarter but after the first consolidation comp A wants to switch to LC as EUR...
    Kindly guide me how to deal with previous data in old LC and config steps related to LC change.
    Regards,
    Balaji.c

    Balaji,
    The usual list of rates & items:
    B/S:
    Investments, Fixed Assets and Equity (except of RE & MI) - historical rates -- might be deviation toward current rate (if the company doesn't want to keep these rates and information)
    RE & MI - average rate (should be the same as in P&L)
    All other items - current rate.
    P&L
    All items - average rate (might be average for a period or YTD).
    Special considerations for cash flow items. But it's a separate theme.
    Edited by: Eugene Khusainov on Apr 25, 2008 11:45 AM

  • Custom data for equipment load from ECC to CRM 7.0

    Dear All,
    Please suggest the steps required to trace the initial/delta load data for equipment from ECC to CRM & carry out the enhancement for missing fields data.
    Thanks & Regards
    DB

    Hi,
    You have to use download object CRM_EQUI_LOAD. First ensure that all the materials and business partners from  ECC to  CRM are downloaded.
    For more details jut go through
    http://help.sap.com/saphelp_sm40/helpdata/en/94/657a3b233b8541a18ed80b424bf1f8/frameset.htm
    Best Regards,
    Rajendra

Maybe you are looking for

  • Printing double-sided copies

    I use a 2012 Macbook and use the USB cord to print to my HP P1102w.  I updated my macbook to the new OSX 10.9 (Maverick), and I see in previous discussions that there is no longer a pop-up window prompting the user to reinsert the paper into the tray

  • Calling javascript from swf (which is source file of frame) - problems with OPERA

    hey, right now i have the swf-file as the source file for a frame, because i want the swf-width depend on the browser-size. it looks kinda like this: <frameset cols="10,*,10"> <frame src="border.htm" name="leftFrame"> <frame src="file.swf" name="main

  • Own page

    Im going to make a site to advertise my own web site services now taking on advice people have given me on here i want to get it all into one page I was thinking having groups of related items inside a main fixed width containing DIV, and a different

  • Master/detail applet

    I've created a master/detail infobus applet with jdeveloper2. In the detail panel, I want to see multiple rows and therefore I used the gridcontrol component. However, this way I can't manipulate the columns (e.g. change one column into a combo box).

  • IE8 and prior not showing Edge Websites. Whats the best solution?

    Hi All... Whats the best solution to have Edge websites appear on IE8 and Prior internet Explorer versions.? Is it too weird to Design the whole website in Adobe Edge? should I just use this sofware to create partial animations for webpages? I see lo