Eclipse environment does not appear the options "Web Dynpro Project"

Hi all,
I installed the SAP NetWeaver 7.1 Composition Environment SP03
But in my eclipse environment does not appear the options "Web Dynpro Project" and not "Development Component Project".
That is, I can not do a Web Dynpro project
I have to do some more configuration in eclipse, for example, carry some plugin?
How to do this, please help me
Thanks,
Vivian

Hi,
         I think you are suffering from the problem below.
Problem Statement:
No Webdynpro Perspective is Visible
only perspectives available are
    Debug
    Resource(default)
    Team Synchronizing
How to Solve:
There are many ways that this kind of error can occur.
1.   It may occur due to "improper installation of NWDS"
How to Check and Resolve :    Is NWDS is displayed in intalled list in Control panel? If 'yes' then it is properly installed. If 'No' then reinstallation is needed.
2. It may occur due to "installation of Skeleton alone"
How to Check:
                                  you can check if your installation includes Web Dynpro by selecting
Help->Software Updates->Manage Configurations.
When installing Developer studio 7.1 you only get the bare eclipse installation (Skeleton). You have to add web dynpro and all, after the initial install is complete.
The installer installs the kernel of the Developer Studio. The kernel contains Eclipse and a few SAP additions, but is not equipped with the SAP features necessary for the Composition Environment. In order to install the required SAP features you have to install the SAP features.
           How to Resolve:
Updating the NWDS software will resolve the problem.
Go to Help->Software Updates->Find and Install. This will install the default SAP plugins that came with your NWDS CE 7.1 setup source and also the additional updates that are needed.

Similar Messages

I can not receive my security answers. not appear the option to get send to my email.

How to retrieve the answers and legally prescribed? I've tried several times. but does not appear the option to send by email.

The reset link will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

Not appear the option SAP Demo News

Hello all,
We have a Enterprise Portal 6.0 in which it does not appear the option SAP Demo News. From which patch level is available that option? On the contrary it shows the News option, that when pressing on this, produces the following error:
+XML - Forms
No se ha puesto a disposición ningún nombre o tipo formulario en el string de query. Sintaxis: XMLFormID=anyValidFormName.: News+
That type of configuration we needed to do?
How we can fix this error?
Best Regards,
Luis Galey

Hi Luis,
The error, you are getting is: <b>No name or formula type has been put at disposal in the string of query. Syntax: XMLFormID=anyValidFormName</b>. As of my knowledge, someone might have been deleted the content ( Under Cont. Admin -> KM Content -> root -> etc). Please check the folder, there might be some problem with xml forms.
Regards,
Venkatesh. K

Does not appear lock option to cover the ipad2 with operational 5.01

Does not appear lock option to cover the ipad2 with operational 5.01

Did this with Adobe support in LIVE CHAT, what a waist of time. Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
After the configure as suggested above, does this preclude and editing in Lighroom?
What I want to do is:
Edit the photo in LR except for:
the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR. Any problems or suggestions for this?
Thanks so much

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

I download iOS 7 one song does not delete. I will swipe but it does not give the option to delete

I downloaded iOS 7 and one song does not give the option to delete

Same problem. Certain songs simply cannot be deleted. I'd love someone to acknowledge it's a bug.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

I forgot my answers of security questions and not appear the option to reset these questions! what should I do?

I forgot my answers of security questions in apple id and not appear the option to reset these questions! what should I do?

If you need your questions reset and you don't have a Rescue Email on file you can speak with an Account Security advisor over the phone to help you reset them and set up a Rescue Email. Use the resource below to find the correct number for your country.
http://support.apple.com/kb/he57
In the US it's 1-800-275-2273
Let us know!

HP8610 does not offer the option to reverse print order

The HP8610 does not offer the option to reverse print order. I downloaded the HP8600 driver and was able to do this. Will the driver for the HP8610 be updated to include this anytime soon?

Apple also need to be told about such issues:
http://www.apple.com/feedback/appletv.html
I've found that the Music Search function has been crippled in recent months - it no longer dynamically updates the list on the right as you enter letters.

I want to restore the secret question and I does not have the option of sending e-mail to restore

I want to restore the secret question and I does not have the option of sending e-mail to restore

Go here, find your country and follow the directions to contact Apple for help.
http://support.apple.com/kb/HT5699

My iphone does not show the option to share the internet, is an iphone 5 what can I do

I can not share the internet because my iphone 5 does not show the option, what can I do

Contact your wireless provider to see if they offer this feature,
and if there is a price to obtain the feature.

My ipad keeps restarting over and over again and even it does not appear the home screen

my ipad keeps restarting over and over again and even it does not appear the home screen...............................how can i fix this.................
`

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
 Cheers, Tom

HT3207 My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't hsowing up?

My Energy Saver section of system preferences does not show the option to choose between energy saver or higher performance. I'd like to maximize my performance... any idea how to do that or why the option isn't showing up?

Mac video card performance

Eclipse environment does not appear the options "Web Dynpro Project"

Similar Messages

Maybe you are looking for