Edge Commons and  adding external data?

I'm trying to add information from a script.  Specifically, this script simply checks the ip address of the user to display the closest city to them and the weather.
The docs on Edge Commons are still sparce, so I don't really have an idea of how to use variables passed to edge.
The script creats four variables:
edge_city
edge_state
edge_temp
edge_weather (cloudy, sunny, etc...)
I want to display these on the stage I have already created.
Any suggestions?
Thanks!

anyone have any information on how to pass page variables in edge?

Similar Messages

  • The "More Everything Plan" is ruining my life!  (and adding random data charges to my bill)

    Hello,
    I recently changed my data plan a few months ago to the 6 GB Data plan with 2 phones tied to my service when I upgraded my phone to the Samsung Galaxy 5.  For the most part my wife and I have been doing pretty good at keeping the our monthly data usage down to the 6 GB.  On Nov 4th was I upgraded to the new 10 GB my everything plan and ever since that change, my account has been making RANDOM data charges at all hours of the night!  I pulled both my wife's Data Usage report and my own and compared them. 
    Looking at my wife's data usage below, you can clearly see that there are automated data spikes that her phone went through on the same exact time on different days!  Looking at the dates, these spikes did not start to automatically occur until we upgraded our plan on Nov 4th.  The same goes for my data usage below.  There are multiple days that my phone surged on the same exact time with large spikes of data!  These reports were organized by largest "Unbilled Data Usage" spikes.
    These spikes SHOULD NOT be occurring and have nothing to do with what apps we have installed our phones.  We have both filtered our usage by apps on our phones and they do not add up.  What's the point of having a larger data plan, if that data plan just steals MG randomly off your phone for no reason???  Because of these spikes, I have add to pay over $100 in overage fees and in November, I have already had to buy MORE DATA ($20 for 5 GB more) because I was already at 90% of my usage with 2 weeks still to go in the billing cycle!  I need actions and not suggestions.  I'm not the only one with these problems and this needs to be addressed.
    Please help!!!!!
    (Wife's Data Usage)
    (My Data Usage)

    You're right, data usage can be confusion...especially when your response above doesn't make sense.
    If data usage is counted in 6 hour blocks, then how in the world did Nov. 5th last 138 hours???  Data was calculated 23 times on 11/5/14 and 14 times on on 11/4.  These are just 2 examples of when the data was pulled in in "6 hour blocks of time". Nearly every day in my pulled report this month shows 2 dozen or more times the data was recorded and billed each day. (see below)
    Further more, if data usage actually was counted in 6 hour intervals, that still doesn't explain why my phone randomly surged 1.27 GB of data at 5:36 AM in the morning on 11/12/14.  Even if this counted data since 11:36 PM the night before on 11/11/14 night, there's no way I would have used this much data!  Since I work during the weekdays 9-5, I am already in bed at this time and not using my phone.  And it can't be recorded data usage after 5:36 AM, because then what would be the point of having a time stamp in the report?  Where was this data coming from???  (see below)
    The timing of my spike in data is just way too coincidental of when I upgraded my data to 10 GB earlier this month.  If you compare our data usage against other months (when I had 6 GB) we didn't have random spikes like we are seeing now.  There is something wrong with the new data plan on our phones, and I really wish someone could clearly point out where these additional charges are coming from.  Please have a representative contact me at your earlier convenience.
    6 Hour Blocks of Time?
    Data pulled at 5:36 AM
    Data Spike in the Past Months

  • Code for Custom Business Object and Adding/Updating Data

    Hi,
    I would like to update/insert data thru Custom Business Object to sql Server.Pls let me know is it possible in MSA.If yes I would appreciate if you can share the code/Process in this forum.
    Thanks and Regds
    Harish

    Harish
    Depending on what data you update you need to do the following:
    If updating SAP tables or customer tables which are an extension of a SAP object like business partner, material, activity or similar:
    1. Create the extension of the data object via the easy enhancement workbench (EEWB). This will also create mapping functionality from MSA to CRM Server and extend the BDocs.
    2. Go to the BDoc modeler. Find the sBDoc for data exchange (type Write BDoc), that contains your object and check whether the new segment is there.
    3. In the Mobile Application Studio (MAS) you can now create a custom business object related to the standard sBDoc mentioned in 2 which is mapped to the new segment. This way the data exchange happens together with the main object
    4. Drag & drop the fields of the new BO to a new tile, and link that tile to the existing main object in the UI via the appropriate relation.
    If you would create a new business object / BDoc for a set of attributes belonging to a main object and not use an extension of the existing BDoc then the data would get its own flow and when replicating it would not come together with the main data. This can lead to data inconsistencies and in surplus effort administrating this data.
    If you have your own objects not related to a SAP object, you can do it the following way:
    1. Create your own table(s)
    2. Create a Write sBDoc on the table(s)
    3. Create BO's on each BDoc segment / table
    4. (as above)
    Hope this helps,
    Kai

  • Adding external data from another forest?

    Hello Community
        The following 2 scenarios are how data is entered and stored in a non-Sharepoint environment: 
        Scenario a) C# ASP.Net or C# Windows applications are used to enter data that gets stored
    into SQL Server databases on a network.
        Scenario b) Users create Word applications, Excel Spreadsheets, PDF's, etc and the data is
    stored in folders on servers on a network.
        In the future a Sharepoint 2013 Server farm is created in a domain in a separate forest.
        The question(s) is:
            #1) How do you add those servers that contain the data in the pre-existing
                 SQL Server databased to the Sharepoint 2013 farm?
            #2) How do you add those servers that contain the data in the pre-existing
                 Word documents, Excel spreadsheets, PDF's, etc into the Sharepoint 2013 farm?
            #3) If it exists, what 3rd party software stated in either #1 and/or #2 above can
                 add those servers or import that data on those servers into the Sharepoint 2013 farm?
        Note: If BCS can be used does each client need to have Microsoft Office 2013 installed
              on each client computer?
        Thank you
        Shabeaut

    SharePoint won't be able to manage documents in those custom/3rd party databases. If this is a 3rd party database, there may be a solution to migrate the information into SharePoint. If it is custom/in-house, then you'll need to build migration utilities
    yourself.
    Ideally, those documents should reside within Document Libraries in SharePoint to have full management over those documents.
    As for BCS, it is meant more for display List-style data, not documents. But clients do not have to have any components installed to leverage BCS, as BCS is a service on SharePoint.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How do I use edge commons composition loader to load multiple compositions with a next and back button?

    I am working on an interactive book and have set up each page as a separate composition in edge.
    I am using  the edge commons JS library to load multiple compositions into a main composition.
    You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
    The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
    Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

    Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
    Let me know if you have any luck.
    //Check to see if pageCounter already exists
    if (typeof EC.pageCounter === 'undefined') {
      // it doesn't exist so initialize it to first page
        EC.pageCounter = 2;
    //check if the page is only 1 digit -- patch for single digit
    if (EC.pageCounter < 9) {
       // it is, so we need to pad a 0 on the front.
      EC.pageCounterString = "0" + EC.pageCounter;
      //e.g.  01 ...09,11,12,13....115,222352,,....
    else {
      EC.pageCounterString = EC.pageCounter;
    EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
    EC.pageCounter = EC.pageCounter + 1;
    //TODO for back  -1

  • Web Analyzer - ability to access external data sources?

    Documentation on help.sap.com for the 2004s Web Analyzer notes it can render queries, query views, infoproviders, and <b>external data sources</b> for ad-hoc analysis in the standardized reporting template.
    Can anyone clarify exactly what constitutes external data?  To my knowledge, I didn't think it was possible to report on something outside of the BI instance (let's say an Oracle table on another server, for example).
    Thanks in advance for your help.

    Hi Scott,
    in the Web Analyzer you can use external OLAP data sources(ODBO or XMLA) . Relational data sources are not supported in NW2004s.
    You can set this up in the portal system landscape.
    Please have a look on
    http://help.sap.com/saphelp_nw2004s/helpdata/de/8e/020597f9b4486492e69283fab424fa/frameset.htm
    and
    http://help.sap.com/saphelp_nw2004s/helpdata/de/8e/020597f9b4486492e69283fab424fa/frameset.htm
    Depending on the data source different capabilities are supported, so that some options are only available when you are using the BI OLAP Processor and won't be supported when using external data sources.
    Heike

  • BAM external data source

    We have around 400k records on which we want to build reports and in our initial approach we are planning to store the data in external tables and use external data source. For POC we created external tables and data source with around 55k records and some basic reports which used sum to group the data. For some reason this report won't load and we don't see any exceptions in the logs. In database session we can see the query it's executing and when we run the same query from sql plus, it returns data within less than 1sec. So we are unsure what the issue could be.
    We are looking for some pointers on what should we look for and how we can resolve this issue. Also if there is any way to specify jdbc connection pool properties.
    Thank you

    BAM is not for reporting purpose. It is ONLY for dashboard purpose. BAM itself has few over heads. So the response is not only dependent on query execution.
    Try creating only updating list with no conditions. Check if it is working. then go for complex reports with conditions.
    Regards,
    Vikrant Korde.

  • External data column as shared column in document library with document sets

    Hello,
    I'm using a document library with document sets. Within this document library i have a External data column called "Project"
    This column has it's columns:
    Project: Installatietype
    Project: Relatie
    Project: Object
    Project: Projectleider
    Project: Status_project
    I wan't to use the external data column as an shared column for my document set(s). But i can't figure out or this is possible.

    Hi,
    According to your description, my understanding is that you want to set the external data column as a shared column in document set content type.
    I tested the same scenario in my environment, and the external data column was not supported to be set as a shared column in document set.
    Here is a similar thread for you to take a look:
    http://social.technet.microsoft.com/Forums/en-US/5488b777-1c18-4895-a264-27802b2cde27/document-set-shared-columns-and-bcs-data?forum=sharepointgeneralprevious
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Lync 2013 /w Edge not working properly (internal/external same domain name and all "external" users"

    Hi,
    I've got some issues with a Lync 2013 setup.
    The config consists of 2 lync servers. One FE and one Edge. All seems to work except audio in meetings and Sip.
    The setup is like this (fake ip's used):
    Front End:
    Internal IP: 172.16.0.10
    External IP: x.x.185.10
    All ports open in Cisco ASA
    internal AD DNS: dialin/lync/meet/lyncdiscover to Front end internal ip. edge/lsedge/sip points to edge internal ip
    EDGE:
    Interal IP: 172.16.0.11 (no gateway configured)
    External IPS: x.x.185.11, x.x.185.12, x.x.185.13
    All external IP's are direct internet facing, no NAT (a firewall is in place).
    All external interfaces are using a wildcard certificate.
    All server are running in a remote data center, so basically no internal users. We all connect to the external interfaces. The Windows domain name (AD) is the same as our External DNS (companyname.com).
    Autodiscover works, we can logon, chat but there is no audio. The audio test failes. Also SIP is not working with a sip trunk.
    External DNS: sip/webconf/av are pointing to their external ip's. sipexternal is a cname to sip. lyncdiscover/lync/dialin/meet all point to the Frond end External ip.
    _sip._tls/_sipfederationtls.tcp/_xmpp-server.tcp all point to the sip.companyname.com ip.
    I just can't figure out what is wrong.

    @PSingh123 I'll try the logs in a minute and get back with the results.
    @PaulB_NZ Thanks for the input. In my opinion the FE does need an external IP. How else will you be able to connect if you are a remote worker?
    The Edge is (asfar as i know) needed for Enterprise voice and Federation with other (external) sip domains. It's not needed for basic (chat/video/whiteboard etc) Lync functionality for both internal and external (remote) users.
    The Edge is to communicate with services/users outside the origanisation.
    I do still think that the basic topology (FE with internal IP and Nat'ed external ip working with an Edge with internal IP and 1 external IP nat'ed to 3 DMZ ip's) is correct in this case.
    I can be wrong and in that case would like to be pointed to the correct configuration.
    75           
    Points
    Top 15
    PSingh123        
    Partner        
    Joined  Jun 2007        
    9
    PSingh123's threads
    Show activity

  • Give swipeleft/right gestures to multiple external compositions that are loaded with composition loader by Edge Commons

    Hello,
    I have multiple external compositions that I load in my Edge project, with the composition loader by Edge Commons.
    I would like to connect these external compositions with swipeleft / right gestures.
    When I give the containers (where the external compositions are loaded in) the swipe gestures, it
    works perfectly. But when the external compositions are loaded, the swipe gestures on the containers doesn't work anymore.
    So is it possible to give the external compositions the swipe gestures. And that when they are loaded in my Edge project, the external compositions can communicate with each other.
    For Example:
    External composition one is loaded and when I swipe to the left, external composition 2 will slide in from right to left.
    I think it must be that the external compositions have a function to control the timeline in the Edge Project.
    I hope that this is possible and can help me with the code. Or have another solution.
    Thanks!

    I think I have the same or a similar issue.
    I am using a modified version of Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
    to listen to touch swipe events in an external compositions.
    var promise = EC.loadComposition("publish/comp_01.html", sym.getSymbol("content"));
         promise.done(function(comp) {
               var stage = comp.getStage();
           // Listen for events dispatched by the external composition
                    stage.$("bg").swipeleft(function() {
                          EC.loadComposition("publish/comp_02.html", sym.getSymbol("content"));
                    stage.$("bg").swiperight(function() {
                          EC.loadComposition("publish/test1.html", sym.getSymbol("content"));
    This works great for the composition loaded by this script, but the comp.getStage function does not pick up on swipe events on anything other than the .$("bg") in this composition.
    For example I have 30 compositions each with a .$("bg") but only the one loaded by this script works with this script. I am looking for a way to universalize the event listener to work with every .$("bg") loaded into my main stage symbol.
    Do you or does anyone else have a solution?

  • SAN certificate for external access for edge server and reverse proxy

    Hello
    I have a question related to the certificate planning for LYNC 2013 EDGE SERVER .
    For external access and mobile user's , Iwant to enable all the feature for external user's .
    im planning to purchase san certificate ,
    my first question do I need only one SAN for both my edge server and the reverse proxy ?
    my second question about the name's that shoud be added to the certificate ?
    sip.mydomain.com
    av.mydomain.com
    webconf.mydomain.com
    what else I should add ? I want to add the names for all feature access.
    Kind Regards
    MK

    Your Front End Pool should only contain front end servers, does it also contain your edge and back end? If so, this is a misconfiguration.
    If you're planning to implement high availability, you'll want a different internal web services FQDN name than your pool name (unless you load balance the entire pool with a hardware load balancer).
    You'll want your external web services FQDN to be different from your pool name if you want to use the mobile client on the internal network.  Once you've come up with a new and otherwise unused FQDN for this purpose, you'll want that as additional
    SAN on your cert.
    Since you're not using this for the internal certificate, you can also pull admin.mydomain.com and LYNC2013-FE.mydomain.com off of the cert as those are needed internally only. 
    Lyncdiscoverinternal you can leave on if you need your internal mobile clients to not throw certificate errors because they don't trust your internal certificate authority, but this name would then need to be pointed to a reverse proxy or something that
    can present the third party certificate.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • How do you get iPhoto albums on to an external HD and not by date?

    I really hope someone can help me with this.
    I don't know if I am missing some really easy step, but I recently bought an external 100GB FireLite drive to back up all my photos and music. The problem is that when I drag the albums on to the hard drive an error message comes up after a while, this even happens if I try to drag one photo. However, if I drag the files in date format, i.e 2001, 2002, 2003 etc.. then the files are copied over. However, when I try and open these on the new drive, they come up in Preview not in iPhoto. I am wondering if anybody else has had these problems and if so, how did you manage to back up your photos on an external hard drive as the albums are shown in iPhoto and not in date format.
    I'd be grateful for any advice.

    Hi Saint tommy,
    -when you drag Albums to the hard drive you are probably running into the problem of having images in the Album that have the same file name. This happens when your camera resets it's file numbering to 1 each time you clear the card. Make sure your camera uses continuos numbering. I am not sure why that would happen dragging one photo.
    -when you drag the photos in date format, the images are still in separate folders as to date of creation, so you will not have the same problem because they are in separate folders.
    -When you open them up on a separate drive, they will open up in Preview because you did not copy the Entire iPhoto Library folder. If you did copy the entire iPhoto Library folder you would have to tell iPhoto where this folder is so it can open it.
    When you launch iPhoto holding down the Option key this is the window you will get.
    Create a new library or choose a library to open
    Choose to create a new library if that is what you want to do, or choose a library to open by clicking the "choose" button.
    If you click the "create library" iPhoto will open with a brand new library for you to import images to. If you click "choose" then you will get this window.
    Open library
    Navigate to where the library is on your computer, highlight it, then clcik the "open" button.
    Now the "how to for backing up the iPhoto Library folder"
    Backing up your iPhoto Library
    1. Burn the iPhoto Library folder in the Finder to a CD or DVD
    This method will give you a burned iPhoto Library folder that can be copied back to your computer to replace a damaged library. You can also use this method to backup an old library when you want to create a new Library to use as your current library.
    insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use a DVD and a SuperDrive-equipped Mac
    The easiest way to burn an iPhoto Library folder in the Finder that is larger than 4.7 gig to fit on one DVD is to burn sections of the folder.
    Drag the iPhoto Library folder to the desktop
    Double click the folder to open it.
    Drag each Year folder to the desktop.
    You should be left with the iPhoto Library folder containing all the data files, and the Year folders.
    Combine whatever year folders that amount closest to a DVD burn size on one DVD. Make sure that you have burned all the Year folders, then the iPhoto Library folder with all the data files.
    If you ever need to use this backup, insert the DVDs into your computer and copy the folders to the desktop. Put all the Year folders back into the iPhoto Library folder. Then put the iPhoto Library folder back into the Pictures folder.
    2. Copy the ENTIRE iPhoto Library to an external drive formated for a Mac. Do not use this as your only back up as the external can also go bad.
    3. Copy the ENTIRE iPhoto Library to your iPod in disk mode
    4.Creating your own CDs and DVDs for viewing in iPhoto
    This method is a great way to back up Albums of older photos or even your entire library if it is small enough to fit on a DVD. This method will give you a library that will mount within iPhoto in the source column to be viewed. To import any images from this library they need to be dragged into your library in the source column.
    If you just want to backup the images in your library:
    1) Within iPhoto select the images, albums or rolls you want to backup. Go to Share>Export and export them to a newly created folder on the desktop. Follow the directions in the next link.
    Creating a CD or DVD to be viewed in Windows or by a photo processing company
    Now the "how to copy the iPhoto Library to an external and have iPhoto use that library."
    Copy the ENTIRE iPhoto Library folder to a Mac formatted external drive.
    Launch iPhoto while holding down the Option key.
    At the prompt, choose to open another library.
    Navigate to the library on the external and highlight it.
    Hit the "open" button
    iPhoto will open the library on the external and from now on will use this library to import images too. This will now be your working library. Make sure everything is working correctly and everything is fine in the library.
    You can then delete the library on the internal if you wish.
    Hope this helps!
    Lori

  • Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

    Hi!
    I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

    Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

  • I just plugged in my Iphone after 4 weeks of downloading music and adding contacts around 400 to be excact and it whipped all my data out and I have no photos nothing reset to factory defult and I cannot even listen to music I purchased because it skips

    I just plugged in my Iphone after 4 weeks of downloading music and adding contacts around 400 to be excact. When I plugged it in my computer it started to sync with iTunes and it whipped all my data out. I have no photos contacts nothing, so I then in a rage reset to factory defult and I cannot even listen to music I purchased because it skips. I just want my phone back

    Was this the very first time you ever plugged the phone into that computer?
    Did you pay attention to the prompts you were given when you plugged it in?
    Did you have iCloud backups turned on before you did this?  I hope so... If you did, restore the phone from the last iCloud backup from before you wiped it. If not, then the photos, etc. are gone. Apps and music can be re-downloaded.

Maybe you are looking for

  • Tecra M3 PTM30A: BSOD while booting - How to reinstall the Win XP?

    Hey Ive got a Toshiba Tecra M3 model number PTM30A-029002 and iv recently experienced a problem which I think a virus did. When I start computer normally it goes to XP loading screen then goes to a blue screen saying stop: c000021a (Fatal System Erro

  • Deletion of parked invoices after carry forward of open items in FM

    Hi, We have Funds management activated in our client.The MIRO invoices are parked for the year 2008.We follow calendar year.Open item are carried forward to 2009 without posting/deleting  the parked invoices.We are now unable to delete the parked inv

  • ITunes 9 - 'last played' and 'play count' still do not sync on manual

    Tonight I upgraded to iTunes 9 and my iPod Touch to v3.1.1 but the 'improved' sync doesn't seem to have improved to what I need. Alright, basically I have a lot of rare songs and live recordings in my library. My iPod Touch is only 16gb and my music

  • Downgrade from solaris 10 to solaris 8 on 240

    Hello, We bought new solaris 240 machines. We need to downgrade the solaris version from 10 to 8 as we have solaris 8 production server. Can anyone please give the steps how to do it. Thanks and Regards, Bas

  • Loop events

    plz explain about at end of? and give me nice example?diff at new and at end of..