Edge Reflow CC (Preview) does not work with Photoshop CC (2014)

I mean, I'm not sure if that how it is or if I'm facing some sort of compatibility problem with Reflow (version 0.47.17127).
I just can't get it to work with the newest Photoshop CC (2014). It only works on Photoshop CC.

Hi, I'm having the same problem. Please advise, thanks.

Similar Messages

  • Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014.

    in Bridge CC Tools - Photoshop - Batch does not work in Photoshop CC 2014. At first I didn't even see the option but I reinstalled Photoshop CC and now I see the menu option but when I try it there is a message that I need to use Photoshop CC. So I open Photoshop CC and the same thing happens? I can't seem to make it work.

    Kitty,
    Your screen shot is in the virus scanning queue, where it can linger for minutes, hours, days or weeks.
    If you use the camera icon in the reply editor's formatting bar, you can embed your image in your post, where it will be viewable instantly.
    then:
    As for your issue, make sure all applicable scripts are checked in Bridge preferences:

  • HT1338 preview does not work with mountain lion

    I updated my mid 2011 mac mini to mountian lion and i find Preview and all of MS Office 2011 for MAC fails to work
    I can cut and paset the logs, but lets astart with assessing whagt does not work with Mountain Lion.

    Your profile lists a 2008 MacBook with Snow Leopard.
    I installed Windows XP into Bootcamp on my 2009 MacBook Pro (either in Leopard or Snow Leopard, I do not remember which) and I used it with Parallels 6.
    When I upgraded it to Lion, even though the Lion Bootcamp will NOT install Windows XP, my Bootcamp (and use by Parallels 7) survived the upgrade.
    It may be possible that it will also survive and operate a future upgrade to Mountain Lion. 

  • My serial number does not work with Photoshop Elements 12

    I have wasted at least 3 hours of my time with this issue
    Be kind enough to respond and if you do not want tell me to move to an alternative product and refund me
    For the teeth time I bought and paid for a photoshop elements 12 windows for my Mac and obviously in retrospect I made an error downloaded but the serial member does not work
    Please supply a correct serial  number
    Please  respond
    Louwrens
    <Removed by Moderator>

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • Code generated with adobe edge for my website does not work with fireox, but does with IE9 and chrome. Why?

    The first time I opened Firefox with the code in my website it worked. Since then it has not worked. I have tried it on another computer and it worked perfectly. That computer runs under Widows XP.

    Reload web page(s) and bypass the cache.
    *Press and hold Shift and left-click the Reload button.
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Cmd + Shift + R" (MAC)
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Using "Forget About This Site" will remove everything from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious if you need to keep passwords or other data from that site.<br />
    You can't recover from that "forget" unless you have a backup of the affected files.
    It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

  • Nik Collection does not work with Photoshop CC 64-bit but with 32-bit

    Hi,
    though the Nik-Collection-Filters are listed (and installed) in PS CC 64, they do not work properly. The first visible difference is, that the "panel" of the various filters is not displayed when I start PS, but it is in the 32 bit version.
    Even if I want to apply an Nik-Filter on an image nothing changes, but it does in 32 bit mode.
    Is there a solution for this problem?
    Thanks!

    Hello, I found a Post. I tried this and it works perfectly, you don't have to re-install CC or install CS6   all you have to do is that you install the Nik Collection in Photoshop CC (32bit) (plug ins)   then you copy the "Google" File and that is the important one !!
    into:
    Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\Panels\ ...........
    it works perfectly. 
    Thanks to Mr. Peter Beckett from NIKONIANS.org
    http://www.nikonians.org/forums/dcboard.php?az=show_topic&forum=319&topic_id=11486&mode=fu ll
    regards from AUSTRIA

  • Lightroom link to PS Panorama merge Not working with Photoshop CC 2014 upgrade

    I recently received an upgrade to PS CC to PS CC2014. After Upgrading I now notice the Option in Lightroom 5.5 to edit in PS and merge to Panorama is no longer working.
    When used, PS program starts, but does not con tune with the script to load existing files and merge into a panorama image.
    Does PS CC 2014 use a different script? as it seems to be failing.
    Has anyone else had this issue, is there a fix coming?

    This worked for me, and a simple solution...
    Start PS - restart LR :-)

  • The extension installer does not work in photoshop cc 2014

    Why is it so impossible to get help anywhere?  It says contacts us, then puts me into a circle loop of nothingness.  I bought an extension for Photoshop cc 2014 the extension manager has it, and claims its installed already but it is not .  I've uninstalled and reinstalled both and still it claims the extension is loaded into Photoshop.. If it is, its not with the action or the extensions under windows.  My God,to talk to any person would be a miracle. I'm really thinking of dropping this whole plan because this one question has taken me hours to even ask any body. Very frustrated indeed.

    Hi,
    When your in photoshop, goto window/extensions. Do you see the extension listed there? If not, your having the same problem as me. I can see some, but not all mine. I want to know why I can't see the others.....I know how frustrating it can be to find help these days. You just go around in damn circles!  I have asked in another post, hopefully we will get an answer soon.

  • After 2013-002 security update quick look preview does not work with Office files

    As title, one of best feature of Snow leopard is definitively dead!!
    Office.qlGenerator is at the same path. How can i solve this bug??

    Hi Yeehat and thanks for your replay.
    Doing my MacBook Pro is a production machine i preferred to not waste more time to proof understand the issue  and try to solve it by a workaround.
    So i have reinstalled SL and it's last combo update, repaired system permission by installation disk. Now all works fine and have had no problem with applications and other settings. Magic: no loss of data or app settings. Now Office file quick look previews all files (old and new).
    Font Library also works well, except about a font that which it's probably corrupted (or not compatible even if it seems to be)
    At the moment i've not installed the last security update...I'm too afraid of having to start all over again :-)))
    First I'll try to read up best on solutions in case Quick Look do still the same issue.
    I know that it is not a "solution" but i was wasting too much job time. I think i will survive a few more weeks without it !!! :-)
    Thanks again

  • Mini DP to HDMI does not work with Mac Mini 2014?

    Hi All,
    I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
    Thanks
    Ray

    Hi there LaureynR,
    You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
    Apple computers: Troubleshooting issues with video on internal or external displays
    -Griff 

  • Could not load MMXCore Routines module because it does not work with Photoshop CS6?

    What is this - should I be concerned?
    Thanks,
    DrDisk

    Hi Joel,
    Check out this FAQ: http://forums.adobe.com/message/4221311#4221311
    regards,
    steve

  • My operating system windows XP not working with photoshop cloud, why not?

    I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
    Please help
    Roy

    Do you have the latest version of iTunes?  If not, get it at:
    http://www.apple.com/itunes

  • Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

    Hi,
    The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
    If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
    Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
    Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
    But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
    The same Webcam works just fine with Lync 2013 under Windows 7.
    Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
    Thanks

    Hi,
    According to your description, it may be caused by driver.
    You can try to install the latest version of Display Driver to fix the display issue.
    Since there is no driver for Windows 8.1, I suggest you wait for updating.
    You can also post a case on Windows 8 forum, thank you for your understanding:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

          
    I originally posted this question here:
    answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
    and was asked to post it on this forum...
    I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
    it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
    up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power.  I have finally gone back the previous version 9926, which has its issues but no where near as bad
    as not having any network connectivity!  Does anyone have this issue and a workaround? 
    Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

    Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
    this... Thanks!
    I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
    (but I suspect not just the only culprit) in this above mentioned problem...
    10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
    is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
    laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
    or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
    I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop. 
    Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
    Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
    that has happened with the Cisco software install attempts under 10041.
    Another note: CISCO Anyconnect also has the issue.

  • Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.

    Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
    An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
    Thanks for the help.

Maybe you are looking for

  • How do I move photos from laptop to desktop WITH Lightroom Edits?

    I have Lightroom on my laptop and on my desktop.  I've just done a big shoot with my camera tethered to Lightroom on my laptop, and applied some develop settings as the photos were imported.  I also did a little cropping and a few other adjustments w

  • Downloading audio from a video file from iTunes?

    I have a 40G 4th Gen click wheel iPod (no color or video). Is there a way to download just the audio from a video file that I have in iTunes?

  • Pageflow calling on nested pageflow in different app

    I have created a login app with a pageflow. I would like to create a totally separate app that could then call that login app if the person is logged in. I deployed the login app to the server and can get to it fine manually (ie http:\\localhost:7001

  • Understanding DMZ ACLs

    I understand ACLs to work in this way on an ASA: If the traffic DESTINATION is a host on the subnet where the ACL exists, it's considered INCOMING.  For example, if I want to allow my hosts on the inside to access the internet, since traffic sourced

  • Image Rotatation

    Dear Friends i want to know how we can rotate multiple images on same place in flash plz help me out Aditya