EDI: Partner profile inbound not available - message variant

Hi Friends,
I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
I checked to partner profile and it is correctly maintaind .
One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
give ur suggestions.
Thanks........

Hi Kiran,
Check your Partner Profile Message Settings in we20.
[Error: "EDI: Partner profile inbound not available";
Regards,
RajeshKumar.D

Similar Messages

EDI: Partner profile inbound not available Message no. E0337

Hi Friends,
I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/0040000010/LI/VN/INVOIC/MM///
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
Please let me know your thoughts, what could be possible reason and a solution.
Thanks
Deepak

Hi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian

File2Idoc - Error [EDI: Partner profile inbound not available]

Hi All,
I am executing file to Idoc Scenario, It is picking the file from sender & delivering to Idoc as well (fields) in R/3 system and showing chequered flag SXMB_MONI.
But If go to WE02 in R/3 : It is showing that Partner Profile not availbe , I have already mentioned in We20 - R/3 system.
EDI: Partner profile inbound not available
Diagnosis
An inbound partner profile could not be found with the following key:
I checked in Idoc - Control Segments - > It is shwoing Wrong recipient Partner No & Type
Recipient Information :-
Partner No - CLNT_300              Expecting   100008
Partner Type - LS                       Expecting     LI
Where are to maintain these entries ?
Please do the needful.
Regards,
~Anshul

Sandeep,
I am using simple Idoc Delivery:-
Idoc:DELINF.DELVRY05      Messgae Type u2013 DELINF     Process Code -- DELV
But I am getting error in R/3 - WE02
I checked in all entries in We20
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/PEVCLNT100/LS//DELINF////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
Thanks,
Anshul

IDoc Receiver, Error in we02 - EDI: Partner profile inbound not available

Hi All,
I have a problem when creating a receiver IDoc from XI to R/3.
I have successfully tested the IDoc when populating the receiver information from the payload. However I want this information to be populated automatically based on the logical systems.
When I do this I get the following error in the IDoc in R/3:
EDI: Partner profile inbound not available
In the control record the sender information is all correct but in the recipient information the partner Number with type LS is populated, but port is not populated.
I have done the following steps.
     the sender is a Business Service so I have created a logical system directly adapter-specific identifiers in the sender service in the integration directory.
     In the receiver business system I have imported the logical system into the adapter-specific identifiers in the ID from that specified in the SLD.
     In the receiving R/3 system using SALE/BD54 I have created a logical system for the source system.
     In the receiving R/3 system using we20 I have created a partner profile of type LS with the same name as the source logical system.
     IN PI/XI system in transaction IDX1 Ive created a port (SAP<SID> where <SID> is the system ID of the receiving R/3 system) and the client of the R/3 system, and the RFC destination of that system (<SID>CLNT<clnt>, as specified in SM59).
     In the IDOC Adapter (receiver) I have entered the RFC destination and port matching those created above. All checkboxes are UN-checked eg. take sender from payload, take receiver from payload, Apply control record values from payload, etc. are all NOT checked.
I think that Ive done everything correctly, but I get the error in we02 in R/3: EDI: Partner profile inbound not available.
Any help will be greatly appreciated (and rewarded, obviously).
Thanks,
Matt.

HI Matt,
Can you please copy paste the exact error message....In your error message it will show you Exact partner Number / Logical System name and other parameters...just compared if you have all parameters set in your partner profile comparing to error message...
If you can giev screen shot of both..then probably would be easy to point out error.
Hope this will help.
Nilesh

Error 56 "EDI: Partner profile inbound not available"

I am tring to post IDOC using we19.
Bu t, I am getting the error 56 "EDI: Partner profile inbound not available"
Could any one please suggest me ..how to solve the problem.

Hi Sam,
When you process the inbound IDoc using standard inbound button, the system will perform validation for a given IDoc control record against the partner profile and file port setup. In your case, there is no inbound partner profile setup (WE2) for the corresponding message type. Therefore, you got an error message 'Partner profile not maintained'.
When you process the inbound IDoc using inbound function module button, the system will <b>NOT</b> perform validation against the partner profile and file port setup. The system will call directly the inbound FM to process the inbound IDoc. You may get an error based on validation of IDoc data record within the inbound FM.
In production environment (real case), the system will always validate againts the partner profile and file port setup for incoming IDoc.
Therefore, it is important to have ALE and IDoc corretly setup for inbound and outbound message types.
Again, hope this will help.
Regards,
Ferry Lianto

Error: "EDI: Partner profile inbound not available"

Hi All,
iam getting the following error while loading the FI related data.
"EDI: Partner profile inbound not available"
Suggestions are appreciated.
thanks
Kiran

Hi,
Refer the link:
Re: EDI: Partner profile not active
With rgdS,
Anil Kumar Sharma .P

Invoice EDI error : EDI: Partner profile inbound not available

Hi EDI experts ,
We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound). We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
Logical system ( BD54)
ECC system - EDACLNT112,
PI systems u2013 IDACLNT210
Third party u2013 LSMINCOM
Port ( WE21)
IDACLNT510 : For PI with RFC destination IDACLNT510
Partner ( WE20)
LSMINCOM : (Partn.Type LS)
Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
Here PO Creation is working fine . IDoC of PO outbound message have below details :
Recipient information:
Port :     IDACLNT510 (Logical system & Port created in WE21 )
Partner Number : LSMINCOM   ( Logical system and Partner created in WE20)
Partn.Type : LS
Function : LS
Sender information:
Port : SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
Partner number:   EDACLNT112 ( Logical system and Partner created in WE20)
Partn.Type : LS
Partner Role :Blank
Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
EDI: Partner profile inbound not availableMessage no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/LSMINCOM/LS//INVOIC///X/
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
Procedure
Please check the inbound partner profiles.
Execute function
I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
Thanks
NAP

Narendra,
Please advice what was the solution.

EDI: Partner profile inbound not available

Hi All,
I am doing File to IDOC Scenario.
File got picked up and every where message is successfull, but when i am checking into WE05 of R3 i am getting an error EDI : Partner Profile not available.
I have already created partner profile in R3 side and assigned correponding Inbound parameters (Message type, Process Code, etc) but still why this error is coming please provide some help.
Exact Error details:
EDI: Partner profile not available
Message no. E0 332
Diagnosis
A partner profile could not be found with the following key:
/RPV147 /LS/
This involves the key fields of the table EDPP1:
-PARNUM partner number
-PARTYP partner type
Procedure
Please check the EDI partner profiles.
Thnx

Hi,
    once the idoc is received in SAP R/3 it will try to find the partner profile based on the sender fields in the control record..
i.e SNDPRN - sender partner...
     SNDPRT - partner type (LS/KU/LF..)
     SNDPFC - Partner funtion...
compare the partner fields created in partner profile with the fields in control record...
Check the below wiki end section if still need more info on the same..
https://wiki.sdn.sap.com/wiki/display/XI/UnabletoconvertSendersystemtoALElogicalsystem
HTH
Rajesh
Edited by: Rajesh on Aug 11, 2010 12:39 PM

EDI Parner profile Inbound not available

hi friends,
when i am posting in bound IDOC i am getting the error 'EDI: Partner profile inbound not available'.
what could be the problem with this error ?
please suggest me with correct solution .. appriciated as quick response.
According to the error i have done the changes in EDI partner profiles.
- Deepu.

Hi,
Check your Inbound partner profile else.
Check the control record Parameter you are sending ,That may be mismatching with the inbound partner profile paramemeters.
Thanks!

Edi partner profile is not found!!!!

Hi
I have created an info package in development and i have transported to quality. And trying to load the data from flat file.
And i have simulated it and it works fine.
but after loading the data in the monitor it is still yellow. And i got the message.
EDI : partner profile not found.
can anyone help me on this!!!
thanxs
haritha

in your bi system. run trans WE20. under Partner type LS you can see your Source System "partner profile". check the existence of your flat file soursystem - "partner profile".
if it isn't existed you have to create one.
in case you don't know how to create, freely to ask me.
Regards,
Chuong Hoang

Edi partner profile inbound parameters urgent plz

hi
iam trying to make settings for inbound parameters of edi for bank, iam wondering what is partner number if partner type is "b"(bank). my partner number will be bank key or house bank or what , bcoz it is not accepting bank key or house bank id

Hi,
In Transaction code FI12 - Change House Bank - Details, there is an push button to create EDI Partner Profiles. Click on that and enter the EDI Partner number. This is not House Bank number / Bank Key. After entering the EDI Partner number, you can click on Partner Profiles and complete the setting up of Partner Profile.
Thanks
Murali.

Partner profile are not available.

Hi,
Iam doing file to idoc scenario. when i execute the scenario idoc is created with error 56 showing partenr profile are not avaialble. what will be the exact reason partenr profile in R/3 input parameter is added but still showing the error . Can anybody tel me soultion please.

Hi Aparna,
Please see this
The distribution model describes the ALE message flows between logical systems.
Use
You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
For more information about maintaining the distribution model see the Customizing Implementation Guide (IMG):
SAP Web Application Server
IDoc Interface/Application Link Enabling (ALE):
Modeling and Implementing Business Processes
Maintaining the Distribution Model
http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/content.htm

EDI partner profile not maintained.

I am currently working on BI 7 and on trying to install ODS from BC its giving me error that
<b>EDI partner Profile is not maintained.</b>
Can somebody please send me the documents on how to maintain EDI partner profile for transferring data from ODS to Infocube.

Hi Amit,
EDI partner profile is maintained using Tcode WE20.
YOu need to select LS (Logical System ) and your Source System.
And maintain Inbound and Outbound parameters here.
Check OSS Note 886102 - System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
Step 6.8: Reactivate all partner profiles that carry the new logical system name after renaming
Execute Transaction WE20 to reactivate the partner profiles. Choose "Partner type LS (logical system)" enter the logical system name of the partner in tab "classification", change the partner status from "I" (inactive) to "A" (active) and save.
Hope this Solves your problem
Thanks
Ck

Error while posting Inbound Idocs-"EDI: Partner profile not available"

Hi,
I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs.
I have done the following steps so far
1.Created IDOC basic Type and Message Type. (Custom)
2. Created process code to process the IDOC.
3. Use the FM IDOC_INBOUND_WRITE_TO_DB to create the inbound IDOC.
4. Use the FM IDOC_START_INBOUND to process the IDOC.
Is ther anything else that i have to do inorder to post the idoc sucessfully.
Thanks in advance
-Nishant
Edited by: nishant patel on Nov 13, 2009 10:35 AM
Edited by: nishant patel on Nov 13, 2009 10:41 AM

Hi,
Check in WE20 if the partner profile is configured for the idoc type and the message type. That might be the cause of the error.
Also make sure the same partner profile details are sent to the control record. Partner profile details are stored in the table EDP13.
Hope this helps
Regards
Shiva

WE20 use&E0336 EDI: Partner profile outbound logical message not available

Hi
When I am creating the vendor master, after selecting payment advise by EDI tick under APP Transactions i am issued a warning message as Account XXX has not yet been agreed as being EDI partner and its directing me to T.Code WE20. What is the use of this.
I have maintained WE20 for the vendor and after running payment run (F110) with payment method as E (Electronic payments-BACS) payment medium file is getting created. But when i go and see the SP01 in the error log the message is shown as E0336 EDI: Partner profile outbound logical message not available.
Can anybody explain what is the use of WE20 t.code and why i am getting the error message.
Brahma

Hi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian

EDI: Partner profile inbound not available - message variant

Similar Messages

Maybe you are looking for